target/linux/layerscape/patches-5.4/820-usb-0010-MLK-22675-usb-dwc3-host-disable-park-mode.patch

From c5324b25fe98c7a4784248b53a75720b226436c2 Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@nxp.com>
Date: Tue, 29 Oct 2019 17:40:25 +0800
Subject: [PATCH] MLK-22675 usb: dwc3: host: disable park mode

- Advantage of park mode
  When only a single Async endpoint is active.

- Behavior of park mode
  1. The controller prefetches data/TRBs to do 3 * burst_size worth
     of packets.
  2. When park mode is disabled there will be some delay between
     bursts on the USB. This can be avoided if park mode is enabled
     in cases of only one endpoint is active.
  3. But this delay is significant only with systems of large
     latencies.
  4. We have noticed that in cases where a device NAKs often, it
     tends to bring down the performance for a single endpoint case.

- Issue on "park mode"
  1. LSP (List Processor) goes in and out of park mode irrespective
     of the fact that there are more endpoints active. #LSP consider
     that there is only one endpoint active.
  2. This causes master scheduler and transaction handlers to think
     that they are in park mode even though they are not. This is
     because request to transaction handlers, generated by HSCH is
     in park mode when the request is made
  3. This causes a case where the master scheduler calculates wrongly
     the number of TRB cache space available.
  4. Because of the wrongly calculated number of TRB spaces, the core
     fetches more TRBS than there is space for.
  5. This causes overwriting the TRB cache area into the TRQ cache
     area which is next to the TRB cache area.
  6. This causes invalidating an entry in the TRQ
  7. This causes transaction handlers to ignore a request in the TRQ
     which it should have processed.
  8. This causes the main scheduler to hang because it is waiting for
     status from transaction handler.
  9. This causes host controller to hang.

- Work Around
  Disabling park mode for super speed by setting GUCTL1[17] to be 1.

The STAR number is 9001415732, which is target to be released around
May,2020.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
---
 drivers/usb/dwc3/core.c | 15 +++++++++++++++
 drivers/usb/dwc3/core.h |  1 +
 2 files changed, 16 insertions(+)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1045,6 +1045,21 @@ static int dwc3_core_init(struct dwc3 *d
 		reg |= DWC3_GUCTL_HSTINAUTORETRY;
 
 		dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+
+		/*
+		 * Disable Park Mode for super speed:
+		 * Park mode is used in host mode when only a single async
+		 * endpoint is active, but which has a known issue cause
+		 * USB3.0 HC may die when read and write at the same time,
+		 * considering the advantages of this mode are minimal,
+		 * this issue only impacts super speed and exist on all IP
+		 * versions, disable it for SS, Synopsys will release a formal
+		 * STAR 9001415732, and disable it by default in next IP
+		 * release.
+		 */
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
+		reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
 	/*
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -255,6 +255,7 @@
 #define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 
 /* Global Status Register */
 #define DWC3_GSTS_OTG_IP	BIT(10)