| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright 2017 Luxul Inc. |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "bcm47081.dtsi" |
| 9 | #include "bcm5301x-nand-cs0-bch4.dtsi" |
| 10 | |
| 11 | / { |
| 12 | compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; |
| 13 | model = "Luxul XWR-1200 V1"; |
| 14 | |
| 15 | chosen { |
| 16 | bootargs = "console=ttyS0,115200"; |
| 17 | }; |
| 18 | |
| 19 | memory@0 { |
| 20 | device_type = "memory"; |
| 21 | reg = <0x00000000 0x08000000>; |
| 22 | }; |
| 23 | |
| 24 | leds { |
| 25 | compatible = "gpio-leds"; |
| 26 | |
| 27 | power { |
| 28 | label = "bcm53xx:green:power"; |
| 29 | gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; |
| 30 | linux,default-trigger = "default-on"; |
| 31 | }; |
| 32 | |
| 33 | lan3 { |
| 34 | label = "bcm53xx:green:lan3"; |
| 35 | gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; |
| 36 | linux,default-trigger = "none"; |
| 37 | }; |
| 38 | |
| 39 | lan4 { |
| 40 | label = "bcm53xx:green:lan4"; |
| 41 | gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; |
| 42 | linux,default-trigger = "none"; |
| 43 | }; |
| 44 | |
| 45 | wan { |
| 46 | label = "bcm53xx:green:wan"; |
| 47 | gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; |
| 48 | linux,default-trigger = "none"; |
| 49 | }; |
| 50 | |
| 51 | lan2 { |
| 52 | label = "bcm53xx:green:lan2"; |
| 53 | gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; |
| 54 | linux,default-trigger = "none"; |
| 55 | }; |
| 56 | |
| 57 | usb { |
| 58 | label = "bcm53xx:green:usb"; |
| 59 | gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; |
| 60 | trigger-sources = <&ohci_port2>, <&ehci_port2>; |
| 61 | linux,default-trigger = "usbport"; |
| 62 | }; |
| 63 | |
| 64 | status { |
| 65 | label = "bcm53xx:green:status"; |
| 66 | gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; |
| 67 | linux,default-trigger = "timer"; |
| 68 | }; |
| 69 | |
| 70 | 2ghz { |
| 71 | label = "bcm53xx:green:2ghz"; |
| 72 | gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; |
| 73 | linux,default-trigger = "none"; |
| 74 | }; |
| 75 | |
| 76 | 5ghz { |
| 77 | label = "bcm53xx:green:5ghz"; |
| 78 | gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; |
| 79 | linux,default-trigger = "none"; |
| 80 | }; |
| 81 | |
| 82 | lan1 { |
| 83 | label = "bcm53xx:green:lan1"; |
| 84 | gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; |
| 85 | linux,default-trigger = "none"; |
| 86 | }; |
| 87 | }; |
| 88 | |
| 89 | gpio-keys { |
| 90 | compatible = "gpio-keys"; |
| 91 | |
| 92 | restart { |
| 93 | label = "Reset"; |
| 94 | linux,code = <KEY_RESTART>; |
| 95 | gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; |
| 96 | }; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | &usb2 { |
| 101 | vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; |
| 102 | }; |
| 103 | |
| 104 | &spi_nor { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | |
| 108 | &usb3_phy { |
| 109 | status = "okay"; |
| 110 | }; |