Gitiles
Code Review Sign In
192.168.1.100 / T108 / c2023d5d03be91dbb983606f0ec5e9e4ea36c8c2 / . / marvell / linux / arch / arm / boot / dts / exynos5410-odroidxu.dts
blob: 51b1a7f1947162a8241a9205333215f73f7eb42c [file] [log] [blame]
b.liue9582032025-04-17 19:18:16 +0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Hardkernel Odroid XU board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 * Copyright (c) 2016 Krzysztof Kozlowski
8 */
9
10/dts-v1/;
11#include "exynos5410.dtsi"
12#include <dt-bindings/clock/maxim,max77802.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/interrupt-controller/irq.h>
15#include <dt-bindings/sound/samsung-i2s.h>
16#include "exynos54xx-odroidxu-leds.dtsi"
17
18/ {
19 model = "Hardkernel Odroid XU";
20 compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
21
22 memory@40000000 {
23 device_type = "memory";
24 reg = <0x40000000 0x7ea00000>;
25 };
26
27 chosen {
28 stdout-path = "serial2:115200n8";
29 };
30
31 emmc_pwrseq: pwrseq {
32 pinctrl-0 = <&emmc_nrst_pin>;
33 pinctrl-names = "default";
34 compatible = "mmc-pwrseq-emmc";
35 reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
36 };
37
38 fan0: pwm-fan {
39 compatible = "pwm-fan";
40 pwms = <&pwm 0 20972 0>;
41 #cooling-cells = <2>;
42 cooling-levels = <0 130 170 230>;
43 };
44
45 fin_pll: xxti {
46 compatible = "fixed-clock";
47 clock-frequency = <24000000>;
48 clock-output-names = "fin_pll";
49 #clock-cells = <0>;
50 };
51
52 firmware@2073000 {
53 compatible = "samsung,secure-firmware";
54 reg = <0x02073000 0x1000>;
55 };
56
57 sound: sound {
58 compatible = "simple-audio-card";
59
60 simple-audio-card,name = "Odroid-XU";
61 simple-audio-card,widgets =
62 "Headphone", "Headphone Jack",
63 "Speakers", "Speakers";
64 simple-audio-card,routing =
65 "Headphone Jack", "HPL",
66 "Headphone Jack", "HPR",
67 "Headphone Jack", "MICBIAS",
68 "IN1", "Headphone Jack",
69 "Speakers", "SPKL",
70 "Speakers", "SPKR";
71
72 simple-audio-card,format = "i2s";
73 simple-audio-card,bitclock-master = <&link0_codec>;
74 simple-audio-card,frame-master = <&link0_codec>;
75
76 simple-audio-card,cpu {
77 sound-dai = <&audi2s0 0>;
78 system-clock-frequency = <19200000>;
79 };
80
81 link0_codec: simple-audio-card,codec {
82 sound-dai = <&max98090>;
83 clocks = <&audi2s0 CLK_I2S_CDCLK>;
84 };
85 };
86};
87
88&adc {
89 vdd-supply = <&ldo10_reg>;
90 status = "okay";
91};
92
93&audi2s0 {
94 status = "okay";
95};
96
97&clock {
98 clocks = <&fin_pll>;
99 assigned-clocks = <&clock CLK_FOUT_EPLL>;
100 assigned-clock-rates = <192000000>;
101};
102
103&clock_audss {
104 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
105 <&clock_audss EXYNOS_MOUT_I2S>,
106 <&clock_audss EXYNOS_DOUT_SRP>,
107 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
108
109 assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
110 <&clock_audss EXYNOS_MOUT_AUDSS>;
111
112 assigned-clock-rates = <0>,
113 <0>,
114 <96000000>,
115 <19200000>;
116};
117
118&cpu0_thermal {
119 polling-delay-passive = <0>;
120 polling-delay = <0>;
121
122 trips {
123 cpu_alert0: cpu-alert-0 {
124 temperature = <50000>; /* millicelsius */
125 hysteresis = <5000>; /* millicelsius */
126 type = "active";
127 };
128 cpu_alert1: cpu-alert-1 {
129 temperature = <60000>; /* millicelsius */
130 hysteresis = <5000>; /* millicelsius */
131 type = "active";
132 };
133 cpu_alert2: cpu-alert-2 {
134 temperature = <70000>; /* millicelsius */
135 hysteresis = <5000>; /* millicelsius */
136 type = "active";
137 };
138 cpu_crit0: cpu-crit-0 {
139 temperature = <120000>; /* millicelsius */
140 hysteresis = <0>; /* millicelsius */
141 type = "critical";
142 };
143 };
144
145 cooling-maps {
146 map0 {
147 trip = <&cpu_alert0>;
148 cooling-device = <&fan0 0 1>;
149 };
150 map1 {
151 trip = <&cpu_alert1>;
152 cooling-device = <&fan0 1 2>;
153 };
154 map2 {
155 trip = <&cpu_alert2>;
156 cooling-device = <&fan0 2 3>;
157 };
158 };
159};
160
161&hsi2c_4 {
162 samsung,i2c-sda-delay = <100>;
163 samsung,i2c-max-bus-freq = <400000>;
164 status = "okay";
165
166 usb3503: usb-hub@8 {
167 compatible = "smsc,usb3503";
168 reg = <0x08>;
169
170 intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
171 connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
172 reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
173 initial-mode = <1>;
174
175 clock-names = "refclk";
176 clocks = <&pmu_system_controller 0>;
177 refclk-frequency = <24000000>;
178 };
179
180 max77802: pmic@9 {
181 compatible = "maxim,max77802";
182 reg = <0x9>;
183 interrupt-parent = <&gpx0>;
184 interrupts = <4 IRQ_TYPE_NONE>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
187 <&pmic_dvs_3>;
188 #clock-cells = <1>;
189
190 inl1-supply = <&buck5_reg>;
191 inl2-supply = <&buck7_reg>;
192 inl3-supply = <&buck9_reg>;
193 inl4-supply = <&buck9_reg>;
194 inl5-supply = <&buck9_reg>;
195 inl6-supply = <&buck10_reg>;
196 inl7-supply = <&buck9_reg>;
197 /* inl9 supply is BOOST, not configured here */
198 inl10-supply = <&buck7_reg>;
199
200 regulators {
201 buck1_reg: BUCK1 {
202 regulator-name = "vdd_mif";
203 regulator-min-microvolt = <800000>;
204 regulator-max-microvolt = <1300000>;
205 regulator-always-on;
206 regulator-boot-on;
207 };
208
209 buck2_reg: BUCK2 {
210 regulator-name = "vdd_arm";
211 regulator-min-microvolt = <800000>;
212 regulator-max-microvolt = <1500000>;
213 regulator-always-on;
214 regulator-boot-on;
215 };
216
217 buck3_reg: BUCK3 {
218 regulator-name = "vdd_int";
219 regulator-min-microvolt = <800000>;
220 regulator-max-microvolt = <1400000>;
221 regulator-always-on;
222 regulator-boot-on;
223 };
224
225 buck4_reg: BUCK4 {
226 regulator-name = "vdd_g3d";
227 regulator-min-microvolt = <800000>;
228 regulator-max-microvolt = <1400000>;
229 regulator-always-on;
230 regulator-boot-on;
231 };
232
233 buck5_reg: BUCK5 {
234 regulator-name = "vdd_mem";
235 regulator-min-microvolt = <800000>;
236 regulator-max-microvolt = <1500000>;
237 regulator-always-on;
238 regulator-boot-on;
239 };
240
241 buck6_reg: BUCK6 {
242 regulator-name = "vdd_kfc";
243 regulator-min-microvolt = <800000>;
244 regulator-max-microvolt = <1500000>;
245 regulator-always-on;
246 regulator-boot-on;
247 };
248
249 buck7_reg: BUCK7 {
250 regulator-name = "buck7";
251 regulator-min-microvolt = <1300000>;
252 regulator-max-microvolt = <1300000>;
253 regulator-always-on;
254 regulator-boot-on;
255 };
256
257 buck8_reg: BUCK8 {
258 /* vdd_mmc0 */
259 regulator-name = "vddf_2v85";
260 regulator-min-microvolt = <2850000>;
261 regulator-max-microvolt = <2850000>;
262 regulator-always-on;
263 regulator-boot-on;
264 };
265
266 buck9_reg: BUCK9 {
267 regulator-name = "buck9";
268 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <3000000>;
270 regulator-always-on;
271 regulator-boot-on;
272 };
273
274 buck10_reg: BUCK10 {
275 regulator-name = "buck10";
276 regulator-min-microvolt = <2950000>;
277 regulator-max-microvolt = <2950000>;
278 regulator-always-on;
279 regulator-boot-on;
280 };
281
282 ldo1_reg: LDO1 {
283 regulator-name = "vdd_alive";
284 regulator-min-microvolt = <1000000>;
285 regulator-max-microvolt = <1000000>;
286 regulator-always-on;
287 };
288
289 ldo2_reg: LDO2 {
290 regulator-name = "vddq_m1_m2";
291 regulator-min-microvolt = <1200000>;
292 regulator-max-microvolt = <1200000>;
293 regulator-always-on;
294 };
295
296 ldo3_reg: LDO3 {
297 regulator-name = "vddq_gpio";
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-always-on;
301 };
302
303 ldo4_reg: LDO4 {
304 regulator-name = "vddq_mmc2";
305 regulator-min-microvolt = <1800000>;
306 regulator-max-microvolt = <3000000>;
307 /* Having it off prevents reboot */
308 regulator-always-on;
309 };
310
311 ldo5_reg: LDO5 {
312 regulator-name = "vdd18_hsic";
313 regulator-min-microvolt = <1800000>;
314 regulator-max-microvolt = <1800000>;
315 regulator-always-on;
316 };
317
318 ldo6_reg: LDO6 {
319 regulator-name = "vdd18_bpll";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-always-on;
323 };
324
325 ldo7_reg: LDO7 {
326 regulator-name = "vddq_lcd";
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
329 /* Supplies also GPK and GPJ */
330 regulator-always-on;
331 };
332
333 ldo8_reg: LDO8 {
334 regulator-name = "vdd10_hdmi";
335 regulator-min-microvolt = <1000000>;
336 regulator-max-microvolt = <1000000>;
337 regulator-always-on;
338 };
339
340 ldo9_reg: LDO9 {
341 regulator-name = "ldo9";
342 };
343
344 ldo10_reg: LDO10 {
345 regulator-name = "vdd18_mipi";
346 regulator-min-microvolt = <1800000>;
347 regulator-max-microvolt = <1800000>;
348 regulator-always-on;
349 };
350
351 ldo11_reg: LDO11 {
352 regulator-name = "vddq_mmc01";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
355 /*
356 * Having it off prevents accessing MMC after
357 * reboot with error:
358 * MMC Device 1: Clock OFF has been failed.
359 */
360 regulator-always-on;
361 };
362
363 ldo12_reg: LDO12 {
364 regulator-name = "vdd33_usb3";
365 regulator-min-microvolt = <3300000>;
366 regulator-max-microvolt = <3300000>;
367 regulator-always-on;
368 };
369
370 ldo13_reg: LDO13 {
371 regulator-name = "vddq_abbg0";
372 regulator-min-microvolt = <1800000>;
373 regulator-max-microvolt = <1800000>;
374 regulator-always-on;
375 };
376
377 ldo14_reg: LDO14 {
378 regulator-name = "vddq_abbg1";
379 regulator-min-microvolt = <1800000>;
380 regulator-max-microvolt = <1800000>;
381 regulator-always-on;
382 };
383
384 ldo15_reg: LDO15 {
385 regulator-name = "vdd10_usb3";
386 regulator-min-microvolt = <1000000>;
387 regulator-max-microvolt = <1000000>;
388 regulator-always-on;
389 };
390
391 ldo16_reg: LDO16 {
392 regulator-name = "ldo16";
393 };
394
395 ldo17_reg: LDO17 {
396 regulator-name = "cam_sensor_core";
397 regulator-min-microvolt = <1200000>;
398 regulator-max-microvolt = <1200000>;
399 };
400
401 ldo18_reg: LDO18 {
402 regulator-name = "ldo18";
403 regulator-min-microvolt = <1800000>;
404 regulator-max-microvolt = <1800000>;
405 };
406
407 ldo19_reg: LDO19 {
408 regulator-name = "ldo19";
409 };
410
411 ldo20_reg: LDO20 {
412 regulator-name = "vdd_mmc0";
413 regulator-min-microvolt = <1800000>;
414 regulator-max-microvolt = <1800000>;
415 };
416
417 ldo21_reg: LDO21 {
418 /* vdd_mmc2 */
419 regulator-name = "vddf_2v8";
420 regulator-min-microvolt = <2850000>;
421 regulator-max-microvolt = <2850000>;
422 };
423
424 ldo22_reg: LDO22 {
425 regulator-name = "ldo22";
426 };
427
428 ldo23_reg: LDO23 {
429 regulator-name = "dp_p3v3";
430 regulator-min-microvolt = <3300000>;
431 regulator-max-microvolt = <3300000>;
432 regulator-always-on;
433 };
434
435 ldo24_reg: LDO24 {
436 regulator-name = "cam_af";
437 regulator-min-microvolt = <2800000>;
438 regulator-max-microvolt = <2800000>;
439 };
440
441 ldo25_reg: LDO25 {
442 regulator-name = "eth_p3v3";
443 regulator-min-microvolt = <3300000>;
444 regulator-max-microvolt = <3300000>;
445 regulator-always-on;
446 };
447
448 ldo26_reg: LDO26 {
449 regulator-name = "usb30_extclk";
450 regulator-min-microvolt = <3300000>;
451 regulator-max-microvolt = <3300000>;
452 regulator-always-on;
453 };
454
455 ldo27_reg: LDO27 {
456 regulator-name = "ldo27";
457 };
458
459 ldo28_reg: LDO28 {
460 regulator-name = "ldo28";
461 };
462
463 ldo29_reg: LDO29 {
464 regulator-name = "ldo29";
465 };
466
467 ldo30_reg: LDO30 {
468 regulator-name = "vddq_e1_e2";
469 regulator-min-microvolt = <1200000>;
470 regulator-max-microvolt = <1200000>;
471 regulator-always-on;
472 };
473
474 ldo31_reg: LDO31 {
475 regulator-name = "ldo31";
476 };
477
478 /* On revisions with ti,ina231 this is sensor VS */
479 ldo32_reg: LDO32 {
480 regulator-name = "vs_power_meter";
481 regulator-min-microvolt = <3300000>;
482 regulator-max-microvolt = <3300000>;
483 };
484
485 ldo33_reg: LDO33 {
486 regulator-name = "ldo33";
487 };
488
489 ldo34_reg: LDO34 {
490 regulator-name = "ldo34";
491 };
492
493 ldo35_reg: LDO35 {
494 regulator-name = "ldo35";
495 };
496 };
497 };
498};
499
500&i2c_1 {
501 status = "okay";
502 max98090: max98090@10 {
503 compatible = "maxim,max98090";
504 reg = <0x10>;
505 interrupt-parent = <&gpj3>;
506 interrupts = <0 IRQ_TYPE_NONE>;
507 clocks = <&audi2s0 CLK_I2S_CDCLK>;
508 clock-names = "mclk";
509 #sound-dai-cells = <0>;
510 };
511};
512
513&mmc_0 {
514 status = "okay";
515 mmc-pwrseq = <&emmc_pwrseq>;
516 cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
517 card-detect-delay = <200>;
518 samsung,dw-mshc-ciu-div = <3>;
519 samsung,dw-mshc-sdr-timing = <0 4>;
520 samsung,dw-mshc-ddr-timing = <0 2>;
521 pinctrl-names = "default";
522 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
523 bus-width = <8>;
524 cap-mmc-highspeed;
525 mmc-hs200-1_8v;
526 vmmc-supply = <&ldo20_reg>;
527 vqmmc-supply = <&ldo11_reg>;
528};
529
530&mmc_2 {
531 status = "okay";
532 card-detect-delay = <200>;
533 samsung,dw-mshc-ciu-div = <3>;
534 samsung,dw-mshc-sdr-timing = <0 4>;
535 samsung,dw-mshc-ddr-timing = <0 2>;
536 pinctrl-names = "default";
537 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
538 bus-width = <4>;
539 cap-sd-highspeed;
540 vmmc-supply = <&ldo21_reg>;
541 vqmmc-supply = <&ldo4_reg>;
542};
543
544&pinctrl_0 {
545 emmc_nrst_pin: emmc-nrst {
546 samsung,pins = "gpd1-0";
547 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
548 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
549 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
550 };
551
552 sd2_wp: sd2-wp {
553 samsung,pins = "gpm5-0";
554 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
555 /* Pin is floating so be sure to disable write-protect */
556 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
557 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
558 };
559
560 pmic_dvs_3: pmic-dvs-3 {
561 samsung,pins = "gpx0-0";
562 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
563 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
564 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
565 };
566
567 pmic_dvs_2: pmic-dvs-2 {
568 samsung,pins = "gpx0-1";
569 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
570 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
571 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
572 };
573
574 pmic_dvs_1: pmic-dvs-1 {
575 samsung,pins = "gpx0-2";
576 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
577 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
578 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
579 samsung,pin-val = <1>;
580 };
581
582 max77802_irq: max77802-irq {
583 samsung,pins = "gpx0-4";
584 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
585 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
586 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
587 };
588};
589
590&pwm {
591 /*
592 * PWM 0 -- fan
593 * PWM 1 -- Green LED
594 * PWM 2 -- Blue LED
595 * PWM 3 -- on MIPI connector for backlight
596 */
597 pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
598 pinctrl-names = "default";
599 status = "okay";
600};
601
602&rtc {
603 status = "okay";
604 clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
605 clock-names = "rtc", "rtc_src";
606};
607
608&serial_0 {
609 status = "okay";
610};
611
612&serial_1 {
613 status = "okay";
614};
615
616&serial_2 {
617 status = "okay";
618};
619
620&serial_3 {
621 status = "okay";
622};
623
624&tmu_cpu0 {
625 vtmu-supply = <&ldo10_reg>;
626};
627
628&tmu_cpu1 {
629 vtmu-supply = <&ldo10_reg>;
630};
631
632&tmu_cpu2 {
633 vtmu-supply = <&ldo10_reg>;
634};
635
636&tmu_cpu3 {
637 vtmu-supply = <&ldo10_reg>;
638};
639
640&usbdrd_dwc3_0 {
641 dr_mode = "peripheral";
642};
643
644&usbdrd_dwc3_1 {
645 dr_mode = "host";
646};
647
648&usbdrd3_0 {
649 vdd33-supply = <&ldo12_reg>;
650 vdd10-supply = <&ldo15_reg>;
651};
652
653&usbdrd3_1 {
654 vdd33-supply = <&ldo12_reg>;
655 vdd10-supply = <&ldo15_reg>;
656};