Gitiles
Code Review Sign In
192.168.1.100 / T108 / c2023d5d03be91dbb983606f0ec5e9e4ea36c8c2 / . / marvell / linux / arch / arm / boot / dts / logicpd-torpedo-baseboard.dtsi
blob: e7a8f8addb6e02d017ea0031f105cf50c1f3a8da [file] [log] [blame]
b.liue9582032025-04-17 19:18:16 +0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only
2
3/ {
4 gpio_keys {
5 compatible = "gpio-keys";
6 pinctrl-names = "default";
7 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
8
9 sysboot2 {
10 label = "sysboot2";
11 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
12 linux,code = <BTN_0>;
13 wakeup-source;
14 };
15
16 sysboot5 {
17 label = "sysboot5";
18 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
19 linux,code = <BTN_1>;
20 wakeup-source;
21 };
22
23 gpio1 {
24 label = "gpio1";
25 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
26 linux,code = <BTN_2>;
27 wakeup-source;
28 };
29
30 gpio2 {
31 label = "gpio2";
32 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
33 linux,code = <BTN_3>;
34 wakeup-source;
35 };
36 };
37
38 sound {
39 compatible = "ti,omap-twl4030";
40 ti,model = "omap3logic";
41 ti,mcbsp = <&mcbsp2>;
42 };
43
44 leds {
45 compatible = "gpio-leds";
46 pinctrl-names = "default";
47 pinctrl-0 = <&led_pins>;
48
49 led1 {
50 label = "led1";
51 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
52 linux,default-trigger = "cpu0";
53 };
54
55 led2 {
56 label = "led2";
57 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
58 linux,default-trigger = "none";
59 };
60 };
61
62 pwm10: dmtimer-pwm {
63 compatible = "ti,omap-dmtimer-pwm";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pwm_pins>;
66 ti,timers = <&timer10>;
67 #pwm-cells = <3>;
68 };
69
70};
71
72&vaux1 {
73 regulator-min-microvolt = <3000000>;
74 regulator-max-microvolt = <3000000>;
75};
76
77&vaux4 {
78 regulator-min-microvolt = <1800000>;
79 regulator-max-microvolt = <1800000>;
80};
81
82&mcbsp2 {
83 pinctrl-names = "default";
84 pinctrl-0 = <&mcbsp2_pins>;
85 status = "okay";
86};
87
88&charger {
89 ti,bb-uvolt = <3200000>;
90 ti,bb-uamp = <150>;
91};
92
93&gpmc {
94 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
95 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
96
97 ethernet@gpmc {
98 pinctrl-names = "default";
99 pinctrl-0 = <&lan9221_pins>;
100 interrupt-parent = <&gpio5>;
101 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
102 reg = <1 0 0xff>;
103 };
104};
105
106&vpll2 {
107 regulator-always-on;
108};
109
110&dss {
111 status = "ok";
112 vdds_dsi-supply = <&vpll2>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&dss_dpi_pins1>;
115 port {
116 dpi_out: endpoint {
117 remote-endpoint = <&lcd_in>;
118 data-lines = <16>;
119 };
120 };
121};
122
123/ {
124 aliases {
125 display0 = &lcd0;
126 };
127
128 lcd0: display {
129 /* This isn't the exact LCD, but the timings meet spec */
130 /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
131 compatible = "newhaven,nhd-4.3-480272ef-atxl";
132 label = "15";
133 pinctrl-names = "default";
134 pinctrl-0 = <&panel_pwr_pins>;
135 backlight = <&bl>;
136 enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
137 port {
138 lcd_in: endpoint {
139 remote-endpoint = <&dpi_out>;
140 };
141 };
142 };
143
144 bl: backlight {
145 compatible = "pwm-backlight";
146 pinctrl-names = "default";
147 pinctrl-0 = <&backlight_pins>;
148 pwms = <&pwm10 0 5000000 0>;
149 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
150 default-brightness-level = <7>;
151 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
152 };
153};
154
155&mmc1 {
156 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&mmc1_pins &mmc1_cd>;
159 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
160 vmmc-supply = <&vmmc1>;
161 bus-width = <4>;
162 cap-power-off-card;
163};
164
165&omap3_pmx_core {
166 gpio_key_pins: pinmux_gpio_key_pins {
167 pinctrl-single,pins = <
168 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
169 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
170 >;
171 };
172
173 pwm_pins: pinmux_pwm_pins {
174 pinctrl-single,pins = <
175 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
176 >;
177 };
178
179 led_pins: pinmux_led_pins {
180 pinctrl-single,pins = <
181 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
182 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
183 >;
184 };
185
186 mmc1_pins: pinmux_mmc1_pins {
187 pinctrl-single,pins = <
188 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
189 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
190 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
191 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
192 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
193 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
194 >;
195 };
196
197 tsc2004_pins: pinmux_tsc2004_pins {
198 pinctrl-single,pins = <
199 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
200 >;
201 };
202
203 backlight_pins: pinmux_backlight_pins {
204 pinctrl-single,pins = <
205 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
206 >;
207 };
208
209 isp_pins: pinmux_isp_pins {
210 pinctrl-single,pins = <
211 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
212 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
213 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
214 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
215
216 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
217 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
218 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
219 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
220 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
221 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
222 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
223 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
224 >;
225 };
226
227 panel_pwr_pins: pinmux_panel_pwr_pins {
228 pinctrl-single,pins = <
229 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
230 >;
231 };
232
233 dss_dpi_pins1: pinmux_dss_dpi_pins1 {
234 pinctrl-single,pins = <
235 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
236 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
237 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
238 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
239
240 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
241 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
242 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
243 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
244 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
245 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
246 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
247 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
248 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
249 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
250 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
251 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
252
253 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
254 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
255 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
256 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
257 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
258 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
259 >;
260 };
261};
262
263&omap3_pmx_wkup {
264 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
265 pinctrl-single,pins = <
266 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
267 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
268 >;
269 };
270
271 lan9221_pins: pinmux_lan9221_pins {
272 pinctrl-single,pins = <
273 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
274 >;
275 };
276
277 mmc1_cd: pinmux_mmc1_cd {
278 pinctrl-single,pins = <
279 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
280 >;
281 };
282};
283
284&i2c2 {
285 mt9p031@48 {
286 compatible = "aptina,mt9p031";
287 reg = <0x48>;
288 clocks = <&isp 0>;
289 vaa-supply = <&vaux4>;
290 vdd-supply = <&vaux4>;
291 vdd_io-supply = <&vaux4>;
292 port {
293 mt9p031_out: endpoint {
294 input-clock-frequency = <24000000>;
295 pixel-clock-frequency = <72000000>;
296 remote-endpoint = <&ccdc_ep>;
297 };
298 };
299 };
300};
301
302&i2c3 {
303 touchscreen: tsc2004@48 {
304 compatible = "ti,tsc2004";
305 reg = <0x48>;
306 vio-supply = <&vaux1>;
307 pinctrl-names = "default";
308 pinctrl-0 = <&tsc2004_pins>;
309 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
310
311 touchscreen-fuzz-x = <4>;
312 touchscreen-fuzz-y = <7>;
313 touchscreen-fuzz-pressure = <2>;
314 touchscreen-size-x = <4096>;
315 touchscreen-size-y = <4096>;
316 touchscreen-max-pressure = <2048>;
317
318 ti,x-plate-ohms = <280>;
319 ti,esd-recovery-timeout-ms = <8000>;
320 };
321};
322
323&mcspi1 {
324 at25@0 {
325 compatible = "atmel,at25";
326 reg = <0>;
327 spi-max-frequency = <5000000>;
328 spi-cpha;
329 spi-cpol;
330
331 pagesize = <64>;
332 size = <32768>;
333 address-width = <16>;
334 };
335};
336
337&isp {
338 pinctrl-names = "default";
339 pinctrl-0 = <&isp_pins>;
340 ports {
341 port@0 {
342 reg = <0>;
343 ccdc_ep: endpoint {
344 remote-endpoint = <&mt9p031_out>;
345 bus-width = <8>;
346 hsync-active = <1>;
347 vsync-active = <1>;
348 pclk-sample = <0>;
349 };
350 };
351 };
352};
353
354&uart1 {
355 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
356};
357
358/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
359&usb_otg_hs {
360 pinctrl-names = "default";
361 pinctrl-0 = <&hsusb_otg_pins>;
362 interface-type = <0>;
363 usb-phy = <&usb2_phy>;
364 phys = <&usb2_phy>;
365 phy-names = "usb2-phy";
366 mode = <3>;
367 power = <50>;
368};