Gitiles
Code Review Sign In
192.168.1.100 / T108 / c2023d5d03be91dbb983606f0ec5e9e4ea36c8c2 / . / marvell / linux / arch / arm / boot / dts / qcom-apq8064-sony-xperia-yuga.dts
blob: 8bf488fb86ad5e233742f9c77b33c0a64d5e31c0 [file] [log] [blame]
b.liue9582032025-04-17 19:18:16 +0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-apq8064-v2.0.dtsi"
3#include <dt-bindings/gpio/gpio.h>
4#include <dt-bindings/input/input.h>
5#include <dt-bindings/mfd/qcom-rpm.h>
6#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7
8/ {
9 model = "Sony Xperia Z";
10 compatible = "sony,xperia-yuga", "qcom,apq8064";
11
12 aliases {
13 serial0 = &gsbi5_serial;
14 };
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 gpio-keys {
21 compatible = "gpio-keys";
22 input-name = "gpio-keys";
23
24 pinctrl-names = "default";
25 pinctrl-0 = <&gpio_keys_pin_a>;
26
27 camera-focus {
28 label = "camera_focus";
29 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
30 linux,input-type = <1>;
31 linux,code = <KEY_CAMERA_FOCUS>;
32 };
33
34 camera-snapshot {
35 label = "camera_snapshot";
36 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
37 linux,input-type = <1>;
38 linux,code = <KEY_CAMERA>;
39 };
40
41 volume-down {
42 label = "volume_down";
43 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
44 linux,input-type = <1>;
45 linux,code = <KEY_VOLUMEDOWN>;
46 };
47
48 volume-up {
49 label = "volume_up";
50 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
51 linux,input-type = <1>;
52 linux,code = <KEY_VOLUMEUP>;
53 };
54 };
55
56 soc {
57 pinctrl@800000 {
58 gsbi5_uart_pin_a: gsbi5-uart-pin-active {
59 rx {
60 pins = "gpio52";
61 function = "gsbi5";
62 drive-strength = <2>;
63 bias-pull-up;
64 };
65
66 tx {
67 pins = "gpio51";
68 function = "gsbi5";
69 drive-strength = <4>;
70 bias-disable;
71 };
72 };
73
74
75 sdcc3_cd_pin_a: sdcc3-cd-pin-active {
76 pins = "gpio26";
77 function = "gpio";
78
79 drive-strength = <2>;
80 bias-disable;
81 };
82 };
83
84
85 rpm@108000 {
86 regulators {
87 vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
88 vin_lvs_1_3_6-supply = <&pm8921_s4>;
89 vin_lvs_4_5_7-supply = <&pm8921_s4>;
90 vin_ncp-supply = <&pm8921_l6>;
91 vin_lvs2-supply = <&pm8921_s4>;
92 vin_l24-supply = <&pm8921_s1>;
93 vin_l25-supply = <&pm8921_s1>;
94 vin_l27-supply = <&pm8921_s7>;
95 vin_l28-supply = <&pm8921_s7>;
96
97 /* Buck SMPS */
98 s1 {
99 regulator-always-on;
100 regulator-min-microvolt = <1225000>;
101 regulator-max-microvolt = <1225000>;
102 qcom,switch-mode-frequency = <3200000>;
103 bias-pull-down;
104 };
105
106 s2 {
107 regulator-min-microvolt = <1300000>;
108 regulator-max-microvolt = <1300000>;
109 qcom,switch-mode-frequency = <1600000>;
110 bias-pull-down;
111 };
112
113 s3 {
114 regulator-min-microvolt = <500000>;
115 regulator-max-microvolt = <1150000>;
116 qcom,switch-mode-frequency = <4800000>;
117 bias-pull-down;
118 };
119
120 s4 {
121 regulator-always-on;
122 regulator-min-microvolt = <1800000>;
123 regulator-max-microvolt = <1800000>;
124 qcom,switch-mode-frequency = <1600000>;
125 bias-pull-down;
126 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
127 };
128
129 s7 {
130 regulator-min-microvolt = <1300000>;
131 regulator-max-microvolt = <1300000>;
132 qcom,switch-mode-frequency = <3200000>;
133 };
134
135 s8 {
136 regulator-min-microvolt = <2200000>;
137 regulator-max-microvolt = <2200000>;
138 qcom,switch-mode-frequency = <1600000>;
139 };
140
141 /* PMOS LDO */
142 l1 {
143 regulator-always-on;
144 regulator-min-microvolt = <1100000>;
145 regulator-max-microvolt = <1100000>;
146 bias-pull-down;
147 };
148
149 l2 {
150 regulator-min-microvolt = <1200000>;
151 regulator-max-microvolt = <1200000>;
152 bias-pull-down;
153 };
154
155 l3 {
156 regulator-min-microvolt = <3075000>;
157 regulator-max-microvolt = <3075000>;
158 bias-pull-down;
159 };
160
161 l4 {
162 regulator-always-on;
163 regulator-min-microvolt = <1800000>;
164 regulator-max-microvolt = <1800000>;
165 bias-pull-down;
166 };
167
168 l5 {
169 regulator-min-microvolt = <2950000>;
170 regulator-max-microvolt = <2950000>;
171 bias-pull-down;
172 };
173
174 l6 {
175 regulator-min-microvolt = <2950000>;
176 regulator-max-microvolt = <2950000>;
177 bias-pull-down;
178 };
179
180 l7 {
181 regulator-min-microvolt = <1850000>;
182 regulator-max-microvolt = <2950000>;
183 bias-pull-down;
184 };
185
186 l8 {
187 regulator-min-microvolt = <2800000>;
188 regulator-max-microvolt = <2800000>;
189 bias-pull-down;
190 };
191
192 l9 {
193 regulator-min-microvolt = <3000000>;
194 regulator-max-microvolt = <3000000>;
195 bias-pull-down;
196 };
197
198 l10 {
199 regulator-min-microvolt = <2900000>;
200 regulator-max-microvolt = <2900000>;
201 bias-pull-down;
202 };
203
204 l11 {
205 regulator-min-microvolt = <3000000>;
206 regulator-max-microvolt = <3000000>;
207 bias-pull-down;
208 };
209
210 l12 {
211 regulator-min-microvolt = <1200000>;
212 regulator-max-microvolt = <1200000>;
213 bias-pull-down;
214 };
215
216 l14 {
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <1800000>;
219 bias-pull-down;
220 };
221
222 l15 {
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <2950000>;
225 bias-pull-down;
226 };
227
228 l16 {
229 regulator-min-microvolt = <2800000>;
230 regulator-max-microvolt = <2800000>;
231 bias-pull-down;
232 };
233
234 l17 {
235 regulator-min-microvolt = <2000000>;
236 regulator-max-microvolt = <2000000>;
237 bias-pull-down;
238 };
239
240 l18 {
241 regulator-min-microvolt = <1200000>;
242 regulator-max-microvolt = <1200000>;
243 bias-pull-down;
244 };
245
246 l21 {
247 regulator-min-microvolt = <1050000>;
248 regulator-max-microvolt = <1050000>;
249 bias-pull-down;
250 };
251
252 l22 {
253 regulator-min-microvolt = <2600000>;
254 regulator-max-microvolt = <2600000>;
255 bias-pull-down;
256 };
257
258 l23 {
259 regulator-min-microvolt = <1800000>;
260 regulator-max-microvolt = <1800000>;
261 bias-pull-down;
262 };
263
264 l24 {
265 regulator-min-microvolt = <750000>;
266 regulator-max-microvolt = <1150000>;
267 bias-pull-down;
268 };
269
270 l25 {
271 regulator-always-on;
272 regulator-min-microvolt = <1250000>;
273 regulator-max-microvolt = <1250000>;
274 bias-pull-down;
275 };
276
277 l27 {
278 regulator-min-microvolt = <1100000>;
279 regulator-max-microvolt = <1100000>;
280 };
281
282 l28 {
283 regulator-min-microvolt = <1050000>;
284 regulator-max-microvolt = <1050000>;
285 bias-pull-down;
286 };
287
288 l29 {
289 regulator-min-microvolt = <2000000>;
290 regulator-max-microvolt = <2000000>;
291 bias-pull-down;
292 };
293
294 /* Low Voltage Switch */
295 lvs1 {
296 bias-pull-down;
297 };
298
299 lvs2 {
300 bias-pull-down;
301 };
302
303 lvs3 {
304 bias-pull-down;
305 };
306
307 lvs4 {
308 bias-pull-down;
309 };
310
311 lvs5 {
312 bias-pull-down;
313 };
314
315 lvs6 {
316 bias-pull-down;
317 };
318
319 lvs7 {
320 bias-pull-down;
321 };
322
323 usb-switch {};
324
325 hdmi-switch {};
326
327 ncp {
328 regulator-min-microvolt = <1800000>;
329 regulator-max-microvolt = <1800000>;
330 qcom,switch-mode-frequency = <1600000>;
331 };
332 };
333 };
334
335 qcom,ssbi@500000 {
336 pmic@0 {
337 gpio@150 {
338 gpio_keys_pin_a: gpio-keys-pin-active {
339 pins = "gpio3", "gpio4", "gpio29", "gpio35";
340 function = "normal";
341
342 bias-pull-up;
343 drive-push-pull;
344 input-enable;
345 power-source = <2>;
346 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
347 qcom,pull-up-strength = <0>;
348 };
349 };
350 };
351 };
352
353 usb@12500000 {
354 status = "okay";
355 dr_mode = "otg";
356 ulpi {
357 phy {
358 v3p3-supply = <&pm8921_l3>;
359 v1p8-supply = <&pm8921_l4>;
360 };
361 };
362 };
363
364 gsbi@1a200000 {
365 status = "ok";
366 qcom,mode = <GSBI_PROT_I2C_UART>;
367
368 serial@1a240000 {
369 status = "ok";
370
371 pinctrl-names = "default";
372 pinctrl-0 = <&gsbi5_uart_pin_a>;
373 };
374 };
375
376 amba {
377 sdcc1: sdcc@12400000 {
378 status = "okay";
379
380 vmmc-supply = <&pm8921_l5>;
381 vqmmc-supply = <&pm8921_s4>;
382 };
383
384 sdcc3: sdcc@12180000 {
385 status = "okay";
386
387 vmmc-supply = <&pm8921_l6>;
388 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
389
390 pinctrl-names = "default";
391 pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
392 };
393 };
394
395 riva-pil@3204000 {
396 status = "okay";
397
398 pinctrl-names = "default";
399 pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
400 };
401 };
402};