| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC |
| 4 | * |
| 5 | * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> |
| 6 | */ |
| 7 | |
| 8 | / { |
| 9 | #address-cells = <1>; |
| 10 | #size-cells = <1>; |
| 11 | compatible = "wm,wm8850"; |
| 12 | |
| 13 | cpus { |
| 14 | #address-cells = <1>; |
| 15 | #size-cells = <0>; |
| 16 | |
| 17 | cpu@0 { |
| 18 | device_type = "cpu"; |
| 19 | compatible = "arm,cortex-a9"; |
| 20 | reg = <0x0>; |
| 21 | }; |
| 22 | }; |
| 23 | |
| 24 | memory { |
| 25 | device_type = "memory"; |
| 26 | reg = <0x0 0x0>; |
| 27 | }; |
| 28 | |
| 29 | aliases { |
| 30 | serial0 = &uart0; |
| 31 | serial1 = &uart1; |
| 32 | serial2 = &uart2; |
| 33 | serial3 = &uart3; |
| 34 | }; |
| 35 | |
| 36 | soc { |
| 37 | #address-cells = <1>; |
| 38 | #size-cells = <1>; |
| 39 | compatible = "simple-bus"; |
| 40 | ranges; |
| 41 | interrupt-parent = <&intc0>; |
| 42 | |
| 43 | intc0: interrupt-controller@d8140000 { |
| 44 | compatible = "via,vt8500-intc"; |
| 45 | interrupt-controller; |
| 46 | reg = <0xd8140000 0x10000>; |
| 47 | #interrupt-cells = <1>; |
| 48 | }; |
| 49 | |
| 50 | /* Secondary IC cascaded to intc0 */ |
| 51 | intc1: interrupt-controller@d8150000 { |
| 52 | compatible = "via,vt8500-intc"; |
| 53 | interrupt-controller; |
| 54 | #interrupt-cells = <1>; |
| 55 | reg = <0xD8150000 0x10000>; |
| 56 | interrupts = <56 57 58 59 60 61 62 63>; |
| 57 | }; |
| 58 | |
| 59 | pinctrl: pinctrl@d8110000 { |
| 60 | compatible = "wm,wm8850-pinctrl"; |
| 61 | reg = <0xd8110000 0x10000>; |
| 62 | interrupt-controller; |
| 63 | #interrupt-cells = <2>; |
| 64 | gpio-controller; |
| 65 | #gpio-cells = <2>; |
| 66 | }; |
| 67 | |
| 68 | pmc@d8130000 { |
| 69 | compatible = "via,vt8500-pmc"; |
| 70 | reg = <0xd8130000 0x1000>; |
| 71 | |
| 72 | clocks { |
| 73 | #address-cells = <1>; |
| 74 | #size-cells = <0>; |
| 75 | |
| 76 | ref25: ref25M { |
| 77 | #clock-cells = <0>; |
| 78 | compatible = "fixed-clock"; |
| 79 | clock-frequency = <25000000>; |
| 80 | }; |
| 81 | |
| 82 | ref24: ref24M { |
| 83 | #clock-cells = <0>; |
| 84 | compatible = "fixed-clock"; |
| 85 | clock-frequency = <24000000>; |
| 86 | }; |
| 87 | |
| 88 | plla: plla { |
| 89 | #clock-cells = <0>; |
| 90 | compatible = "wm,wm8850-pll-clock"; |
| 91 | clocks = <&ref24>; |
| 92 | reg = <0x200>; |
| 93 | }; |
| 94 | |
| 95 | pllb: pllb { |
| 96 | #clock-cells = <0>; |
| 97 | compatible = "wm,wm8850-pll-clock"; |
| 98 | clocks = <&ref24>; |
| 99 | reg = <0x204>; |
| 100 | }; |
| 101 | |
| 102 | pllc: pllc { |
| 103 | #clock-cells = <0>; |
| 104 | compatible = "wm,wm8850-pll-clock"; |
| 105 | clocks = <&ref24>; |
| 106 | reg = <0x208>; |
| 107 | }; |
| 108 | |
| 109 | plld: plld { |
| 110 | #clock-cells = <0>; |
| 111 | compatible = "wm,wm8850-pll-clock"; |
| 112 | clocks = <&ref24>; |
| 113 | reg = <0x20c>; |
| 114 | }; |
| 115 | |
| 116 | plle: plle { |
| 117 | #clock-cells = <0>; |
| 118 | compatible = "wm,wm8850-pll-clock"; |
| 119 | clocks = <&ref24>; |
| 120 | reg = <0x210>; |
| 121 | }; |
| 122 | |
| 123 | pllf: pllf { |
| 124 | #clock-cells = <0>; |
| 125 | compatible = "wm,wm8850-pll-clock"; |
| 126 | clocks = <&ref24>; |
| 127 | reg = <0x214>; |
| 128 | }; |
| 129 | |
| 130 | pllg: pllg { |
| 131 | #clock-cells = <0>; |
| 132 | compatible = "wm,wm8850-pll-clock"; |
| 133 | clocks = <&ref24>; |
| 134 | reg = <0x218>; |
| 135 | }; |
| 136 | |
| 137 | clkarm: arm { |
| 138 | #clock-cells = <0>; |
| 139 | compatible = "via,vt8500-device-clock"; |
| 140 | clocks = <&plla>; |
| 141 | divisor-reg = <0x300>; |
| 142 | }; |
| 143 | |
| 144 | clkahb: ahb { |
| 145 | #clock-cells = <0>; |
| 146 | compatible = "via,vt8500-device-clock"; |
| 147 | clocks = <&pllb>; |
| 148 | divisor-reg = <0x304>; |
| 149 | }; |
| 150 | |
| 151 | clkapb: apb { |
| 152 | #clock-cells = <0>; |
| 153 | compatible = "via,vt8500-device-clock"; |
| 154 | clocks = <&pllb>; |
| 155 | divisor-reg = <0x320>; |
| 156 | }; |
| 157 | |
| 158 | clkddr: ddr { |
| 159 | #clock-cells = <0>; |
| 160 | compatible = "via,vt8500-device-clock"; |
| 161 | clocks = <&plld>; |
| 162 | divisor-reg = <0x310>; |
| 163 | }; |
| 164 | |
| 165 | clkuart0: uart0 { |
| 166 | #clock-cells = <0>; |
| 167 | compatible = "via,vt8500-device-clock"; |
| 168 | clocks = <&ref24>; |
| 169 | enable-reg = <0x254>; |
| 170 | enable-bit = <24>; |
| 171 | }; |
| 172 | |
| 173 | clkuart1: uart1 { |
| 174 | #clock-cells = <0>; |
| 175 | compatible = "via,vt8500-device-clock"; |
| 176 | clocks = <&ref24>; |
| 177 | enable-reg = <0x254>; |
| 178 | enable-bit = <25>; |
| 179 | }; |
| 180 | |
| 181 | clkuart2: uart2 { |
| 182 | #clock-cells = <0>; |
| 183 | compatible = "via,vt8500-device-clock"; |
| 184 | clocks = <&ref24>; |
| 185 | enable-reg = <0x254>; |
| 186 | enable-bit = <26>; |
| 187 | }; |
| 188 | |
| 189 | clkuart3: uart3 { |
| 190 | #clock-cells = <0>; |
| 191 | compatible = "via,vt8500-device-clock"; |
| 192 | clocks = <&ref24>; |
| 193 | enable-reg = <0x254>; |
| 194 | enable-bit = <27>; |
| 195 | }; |
| 196 | |
| 197 | clkpwm: pwm { |
| 198 | #clock-cells = <0>; |
| 199 | compatible = "via,vt8500-device-clock"; |
| 200 | clocks = <&pllb>; |
| 201 | divisor-reg = <0x350>; |
| 202 | enable-reg = <0x250>; |
| 203 | enable-bit = <17>; |
| 204 | }; |
| 205 | |
| 206 | clksdhc: sdhc { |
| 207 | #clock-cells = <0>; |
| 208 | compatible = "via,vt8500-device-clock"; |
| 209 | clocks = <&pllb>; |
| 210 | divisor-reg = <0x330>; |
| 211 | divisor-mask = <0x3f>; |
| 212 | enable-reg = <0x250>; |
| 213 | enable-bit = <0>; |
| 214 | }; |
| 215 | }; |
| 216 | }; |
| 217 | |
| 218 | fb: fb@d8051700 { |
| 219 | compatible = "wm,wm8505-fb"; |
| 220 | reg = <0xd8051700 0x200>; |
| 221 | }; |
| 222 | |
| 223 | ge_rops@d8050400 { |
| 224 | compatible = "wm,prizm-ge-rops"; |
| 225 | reg = <0xd8050400 0x100>; |
| 226 | }; |
| 227 | |
| 228 | pwm: pwm@d8220000 { |
| 229 | #pwm-cells = <3>; |
| 230 | compatible = "via,vt8500-pwm"; |
| 231 | reg = <0xd8220000 0x100>; |
| 232 | clocks = <&clkpwm>; |
| 233 | }; |
| 234 | |
| 235 | timer@d8130100 { |
| 236 | compatible = "via,vt8500-timer"; |
| 237 | reg = <0xd8130100 0x28>; |
| 238 | interrupts = <36>; |
| 239 | }; |
| 240 | |
| 241 | ehci@d8007900 { |
| 242 | compatible = "via,vt8500-ehci"; |
| 243 | reg = <0xd8007900 0x200>; |
| 244 | interrupts = <26>; |
| 245 | }; |
| 246 | |
| 247 | uhci@d8007b00 { |
| 248 | compatible = "platform-uhci"; |
| 249 | reg = <0xd8007b00 0x200>; |
| 250 | interrupts = <26>; |
| 251 | }; |
| 252 | |
| 253 | uhci@d8008d00 { |
| 254 | compatible = "platform-uhci"; |
| 255 | reg = <0xd8008d00 0x200>; |
| 256 | interrupts = <26>; |
| 257 | }; |
| 258 | |
| 259 | uart0: serial@d8200000 { |
| 260 | compatible = "via,vt8500-uart"; |
| 261 | reg = <0xd8200000 0x1040>; |
| 262 | interrupts = <32>; |
| 263 | clocks = <&clkuart0>; |
| 264 | status = "disabled"; |
| 265 | }; |
| 266 | |
| 267 | uart1: serial@d82b0000 { |
| 268 | compatible = "via,vt8500-uart"; |
| 269 | reg = <0xd82b0000 0x1040>; |
| 270 | interrupts = <33>; |
| 271 | clocks = <&clkuart1>; |
| 272 | status = "disabled"; |
| 273 | }; |
| 274 | |
| 275 | uart2: serial@d8210000 { |
| 276 | compatible = "via,vt8500-uart"; |
| 277 | reg = <0xd8210000 0x1040>; |
| 278 | interrupts = <47>; |
| 279 | clocks = <&clkuart2>; |
| 280 | status = "disabled"; |
| 281 | }; |
| 282 | |
| 283 | uart3: serial@d82c0000 { |
| 284 | compatible = "via,vt8500-uart"; |
| 285 | reg = <0xd82c0000 0x1040>; |
| 286 | interrupts = <50>; |
| 287 | clocks = <&clkuart3>; |
| 288 | status = "disabled"; |
| 289 | }; |
| 290 | |
| 291 | rtc@d8100000 { |
| 292 | compatible = "via,vt8500-rtc"; |
| 293 | reg = <0xd8100000 0x10000>; |
| 294 | interrupts = <48>; |
| 295 | }; |
| 296 | |
| 297 | sdhc@d800a000 { |
| 298 | compatible = "wm,wm8505-sdhc"; |
| 299 | reg = <0xd800a000 0x1000>; |
| 300 | interrupts = <20 21>; |
| 301 | clocks = <&clksdhc>; |
| 302 | bus-width = <4>; |
| 303 | sdon-inverted; |
| 304 | }; |
| 305 | |
| 306 | ethernet@d8004000 { |
| 307 | compatible = "via,vt8500-rhine"; |
| 308 | reg = <0xd8004000 0x100>; |
| 309 | interrupts = <10>; |
| 310 | }; |
| 311 | }; |
| 312 | }; |