| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only | 
 | 2 | /* | 
 | 3 |  * drivers/leds/leds-as3645a.c - AS3645A and LM3555 flash controllers driver | 
 | 4 |  * | 
 | 5 |  * Copyright (C) 2008-2011 Nokia Corporation | 
 | 6 |  * Copyright (c) 2011, 2017 Intel Corporation. | 
 | 7 |  * | 
 | 8 |  * Based on drivers/media/i2c/as3645a.c. | 
 | 9 |  * | 
 | 10 |  * Contact: Sakari Ailus <sakari.ailus@iki.fi> | 
 | 11 |  */ | 
 | 12 |  | 
 | 13 | #include <linux/delay.h> | 
 | 14 | #include <linux/gpio/consumer.h> | 
 | 15 | #include <linux/i2c.h> | 
 | 16 | #include <linux/led-class-flash.h> | 
 | 17 | #include <linux/leds.h> | 
 | 18 | #include <linux/module.h> | 
 | 19 | #include <linux/mutex.h> | 
 | 20 | #include <linux/property.h> | 
 | 21 | #include <linux/slab.h> | 
 | 22 |  | 
 | 23 | #include <media/v4l2-flash-led-class.h> | 
 | 24 |  | 
 | 25 | #define AS_TIMER_US_TO_CODE(t)			(((t) / 1000 - 100) / 50) | 
 | 26 | #define AS_TIMER_CODE_TO_US(c)			((50 * (c) + 100) * 1000) | 
 | 27 |  | 
 | 28 | /* Register definitions */ | 
 | 29 |  | 
 | 30 | /* Read-only Design info register: Reset state: xxxx 0001 */ | 
 | 31 | #define AS_DESIGN_INFO_REG			0x00 | 
 | 32 | #define AS_DESIGN_INFO_FACTORY(x)		(((x) >> 4)) | 
 | 33 | #define AS_DESIGN_INFO_MODEL(x)			((x) & 0x0f) | 
 | 34 |  | 
 | 35 | /* Read-only Version control register: Reset state: 0000 0000 | 
 | 36 |  * for first engineering samples | 
 | 37 |  */ | 
 | 38 | #define AS_VERSION_CONTROL_REG			0x01 | 
 | 39 | #define AS_VERSION_CONTROL_RFU(x)		(((x) >> 4)) | 
 | 40 | #define AS_VERSION_CONTROL_VERSION(x)		((x) & 0x0f) | 
 | 41 |  | 
 | 42 | /* Read / Write	(Indicator and timer register): Reset state: 0000 1111 */ | 
 | 43 | #define AS_INDICATOR_AND_TIMER_REG		0x02 | 
 | 44 | #define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT	0 | 
 | 45 | #define AS_INDICATOR_AND_TIMER_VREF_SHIFT	4 | 
 | 46 | #define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT	6 | 
 | 47 |  | 
 | 48 | /* Read / Write	(Current set register): Reset state: 0110 1001 */ | 
 | 49 | #define AS_CURRENT_SET_REG			0x03 | 
 | 50 | #define AS_CURRENT_ASSIST_LIGHT_SHIFT		0 | 
 | 51 | #define AS_CURRENT_LED_DET_ON			(1 << 3) | 
 | 52 | #define AS_CURRENT_FLASH_CURRENT_SHIFT		4 | 
 | 53 |  | 
 | 54 | /* Read / Write	(Control register): Reset state: 1011 0100 */ | 
 | 55 | #define AS_CONTROL_REG				0x04 | 
 | 56 | #define AS_CONTROL_MODE_SETTING_SHIFT		0 | 
 | 57 | #define AS_CONTROL_STROBE_ON			(1 << 2) | 
 | 58 | #define AS_CONTROL_OUT_ON			(1 << 3) | 
 | 59 | #define AS_CONTROL_EXT_TORCH_ON			(1 << 4) | 
 | 60 | #define AS_CONTROL_STROBE_TYPE_EDGE		(0 << 5) | 
 | 61 | #define AS_CONTROL_STROBE_TYPE_LEVEL		(1 << 5) | 
 | 62 | #define AS_CONTROL_COIL_PEAK_SHIFT		6 | 
 | 63 |  | 
 | 64 | /* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ | 
 | 65 | #define AS_FAULT_INFO_REG			0x05 | 
 | 66 | #define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT	(1 << 1) | 
 | 67 | #define AS_FAULT_INFO_INDICATOR_LED		(1 << 2) | 
 | 68 | #define AS_FAULT_INFO_LED_AMOUNT		(1 << 3) | 
 | 69 | #define AS_FAULT_INFO_TIMEOUT			(1 << 4) | 
 | 70 | #define AS_FAULT_INFO_OVER_TEMPERATURE		(1 << 5) | 
 | 71 | #define AS_FAULT_INFO_SHORT_CIRCUIT		(1 << 6) | 
 | 72 | #define AS_FAULT_INFO_OVER_VOLTAGE		(1 << 7) | 
 | 73 |  | 
 | 74 | /* Boost register */ | 
 | 75 | #define AS_BOOST_REG				0x0d | 
 | 76 | #define AS_BOOST_CURRENT_DISABLE		(0 << 0) | 
 | 77 | #define AS_BOOST_CURRENT_ENABLE			(1 << 0) | 
 | 78 |  | 
 | 79 | /* Password register is used to unlock boost register writing */ | 
 | 80 | #define AS_PASSWORD_REG				0x0f | 
 | 81 | #define AS_PASSWORD_UNLOCK_VALUE		0x55 | 
 | 82 |  | 
 | 83 | #define AS_NAME					"as3645a" | 
 | 84 | #define AS_I2C_ADDR				(0x60 >> 1) /* W:0x60, R:0x61 */ | 
 | 85 |  | 
 | 86 | #define AS_FLASH_TIMEOUT_MIN			100000	/* us */ | 
 | 87 | #define AS_FLASH_TIMEOUT_MAX			850000 | 
 | 88 | #define AS_FLASH_TIMEOUT_STEP			50000 | 
 | 89 |  | 
 | 90 | #define AS_FLASH_INTENSITY_MIN			200000	/* uA */ | 
 | 91 | #define AS_FLASH_INTENSITY_MAX_1LED		500000 | 
 | 92 | #define AS_FLASH_INTENSITY_MAX_2LEDS		400000 | 
 | 93 | #define AS_FLASH_INTENSITY_STEP			20000 | 
 | 94 |  | 
 | 95 | #define AS_TORCH_INTENSITY_MIN			20000	/* uA */ | 
 | 96 | #define AS_TORCH_INTENSITY_MAX			160000 | 
 | 97 | #define AS_TORCH_INTENSITY_STEP			20000 | 
 | 98 |  | 
 | 99 | #define AS_INDICATOR_INTENSITY_MIN		0	/* uA */ | 
 | 100 | #define AS_INDICATOR_INTENSITY_MAX		10000 | 
 | 101 | #define AS_INDICATOR_INTENSITY_STEP		2500 | 
 | 102 |  | 
 | 103 | #define AS_PEAK_mA_MAX				2000 | 
 | 104 | #define AS_PEAK_mA_TO_REG(a) \ | 
 | 105 | 	((min_t(u32, AS_PEAK_mA_MAX, a) - 1250) / 250) | 
 | 106 |  | 
 | 107 | /* LED numbers for Devicetree */ | 
 | 108 | #define AS_LED_FLASH				0 | 
 | 109 | #define AS_LED_INDICATOR			1 | 
 | 110 |  | 
 | 111 | enum as_mode { | 
 | 112 | 	AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, | 
 | 113 | 	AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, | 
 | 114 | 	AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, | 
 | 115 | 	AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, | 
 | 116 | }; | 
 | 117 |  | 
 | 118 | struct as3645a_config { | 
 | 119 | 	u32 flash_timeout_us; | 
 | 120 | 	u32 flash_max_ua; | 
 | 121 | 	u32 assist_max_ua; | 
 | 122 | 	u32 indicator_max_ua; | 
 | 123 | 	u32 voltage_reference; | 
 | 124 | 	u32 peak; | 
 | 125 | }; | 
 | 126 |  | 
 | 127 | struct as3645a { | 
 | 128 | 	struct i2c_client *client; | 
 | 129 |  | 
 | 130 | 	struct mutex mutex; | 
 | 131 |  | 
 | 132 | 	struct led_classdev_flash fled; | 
 | 133 | 	struct led_classdev iled_cdev; | 
 | 134 |  | 
 | 135 | 	struct v4l2_flash *vf; | 
 | 136 | 	struct v4l2_flash *vfind; | 
 | 137 |  | 
 | 138 | 	struct fwnode_handle *flash_node; | 
 | 139 | 	struct fwnode_handle *indicator_node; | 
 | 140 |  | 
 | 141 | 	struct as3645a_config cfg; | 
 | 142 |  | 
 | 143 | 	enum as_mode mode; | 
 | 144 | 	unsigned int timeout; | 
 | 145 | 	unsigned int flash_current; | 
 | 146 | 	unsigned int assist_current; | 
 | 147 | 	unsigned int indicator_current; | 
 | 148 | 	enum v4l2_flash_strobe_source strobe_source; | 
 | 149 | }; | 
 | 150 |  | 
 | 151 | #define fled_to_as3645a(__fled) container_of(__fled, struct as3645a, fled) | 
 | 152 | #define iled_cdev_to_as3645a(__iled_cdev) \ | 
 | 153 | 	container_of(__iled_cdev, struct as3645a, iled_cdev) | 
 | 154 |  | 
 | 155 | /* Return negative errno else zero on success */ | 
 | 156 | static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) | 
 | 157 | { | 
 | 158 | 	struct i2c_client *client = flash->client; | 
 | 159 | 	int rval; | 
 | 160 |  | 
 | 161 | 	rval = i2c_smbus_write_byte_data(client, addr, val); | 
 | 162 |  | 
 | 163 | 	dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, | 
 | 164 | 		rval < 0 ? "fail" : "ok"); | 
 | 165 |  | 
 | 166 | 	return rval; | 
 | 167 | } | 
 | 168 |  | 
 | 169 | /* Return negative errno else a data byte received from the device. */ | 
 | 170 | static int as3645a_read(struct as3645a *flash, u8 addr) | 
 | 171 | { | 
 | 172 | 	struct i2c_client *client = flash->client; | 
 | 173 | 	int rval; | 
 | 174 |  | 
 | 175 | 	rval = i2c_smbus_read_byte_data(client, addr); | 
 | 176 |  | 
 | 177 | 	dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, | 
 | 178 | 		rval < 0 ? "fail" : "ok"); | 
 | 179 |  | 
 | 180 | 	return rval; | 
 | 181 | } | 
 | 182 |  | 
 | 183 | /* ----------------------------------------------------------------------------- | 
 | 184 |  * Hardware configuration and trigger | 
 | 185 |  */ | 
 | 186 |  | 
 | 187 | /** | 
 | 188 |  * as3645a_set_config - Set flash configuration registers | 
 | 189 |  * @flash: The flash | 
 | 190 |  * | 
 | 191 |  * Configure the hardware with flash, assist and indicator currents, as well as | 
 | 192 |  * flash timeout. | 
 | 193 |  * | 
 | 194 |  * Return 0 on success, or a negative error code if an I2C communication error | 
 | 195 |  * occurred. | 
 | 196 |  */ | 
 | 197 | static int as3645a_set_current(struct as3645a *flash) | 
 | 198 | { | 
 | 199 | 	u8 val; | 
 | 200 |  | 
 | 201 | 	val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) | 
 | 202 | 	    | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) | 
 | 203 | 	    | AS_CURRENT_LED_DET_ON; | 
 | 204 |  | 
 | 205 | 	return as3645a_write(flash, AS_CURRENT_SET_REG, val); | 
 | 206 | } | 
 | 207 |  | 
 | 208 | static int as3645a_set_timeout(struct as3645a *flash) | 
 | 209 | { | 
 | 210 | 	u8 val; | 
 | 211 |  | 
 | 212 | 	val = flash->timeout << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; | 
 | 213 |  | 
 | 214 | 	val |= (flash->cfg.voltage_reference | 
 | 215 | 		<< AS_INDICATOR_AND_TIMER_VREF_SHIFT) | 
 | 216 | 	    |  ((flash->indicator_current ? flash->indicator_current - 1 : 0) | 
 | 217 | 		 << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); | 
 | 218 |  | 
 | 219 | 	return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); | 
 | 220 | } | 
 | 221 |  | 
 | 222 | /** | 
 | 223 |  * as3645a_set_control - Set flash control register | 
 | 224 |  * @flash: The flash | 
 | 225 |  * @mode: Desired output mode | 
 | 226 |  * @on: Desired output state | 
 | 227 |  * | 
 | 228 |  * Configure the hardware with output mode and state. | 
 | 229 |  * | 
 | 230 |  * Return 0 on success, or a negative error code if an I2C communication error | 
 | 231 |  * occurred. | 
 | 232 |  */ | 
 | 233 | static int | 
 | 234 | as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) | 
 | 235 | { | 
 | 236 | 	u8 reg; | 
 | 237 |  | 
 | 238 | 	/* Configure output parameters and operation mode. */ | 
 | 239 | 	reg = (flash->cfg.peak << AS_CONTROL_COIL_PEAK_SHIFT) | 
 | 240 | 	    | (on ? AS_CONTROL_OUT_ON : 0) | 
 | 241 | 	    | mode; | 
 | 242 |  | 
 | 243 | 	if (mode == AS_MODE_FLASH && | 
 | 244 | 	    flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) | 
 | 245 | 		reg |= AS_CONTROL_STROBE_TYPE_LEVEL | 
 | 246 | 		    |  AS_CONTROL_STROBE_ON; | 
 | 247 |  | 
 | 248 | 	return as3645a_write(flash, AS_CONTROL_REG, reg); | 
 | 249 | } | 
 | 250 |  | 
 | 251 | static int as3645a_get_fault(struct led_classdev_flash *fled, u32 *fault) | 
 | 252 | { | 
 | 253 | 	struct as3645a *flash = fled_to_as3645a(fled); | 
 | 254 | 	int rval; | 
 | 255 |  | 
 | 256 | 	/* NOTE: reading register clears fault status */ | 
 | 257 | 	rval = as3645a_read(flash, AS_FAULT_INFO_REG); | 
 | 258 | 	if (rval < 0) | 
 | 259 | 		return rval; | 
 | 260 |  | 
 | 261 | 	if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) | 
 | 262 | 		*fault |= LED_FAULT_OVER_CURRENT; | 
 | 263 |  | 
 | 264 | 	if (rval & AS_FAULT_INFO_INDICATOR_LED) | 
 | 265 | 		*fault |= LED_FAULT_INDICATOR; | 
 | 266 |  | 
 | 267 | 	dev_dbg(&flash->client->dev, "%u connected LEDs\n", | 
 | 268 | 		rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); | 
 | 269 |  | 
 | 270 | 	if (rval & AS_FAULT_INFO_TIMEOUT) | 
 | 271 | 		*fault |= LED_FAULT_TIMEOUT; | 
 | 272 |  | 
 | 273 | 	if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) | 
 | 274 | 		*fault |= LED_FAULT_OVER_TEMPERATURE; | 
 | 275 |  | 
 | 276 | 	if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) | 
 | 277 | 		*fault |= LED_FAULT_OVER_CURRENT; | 
 | 278 |  | 
 | 279 | 	if (rval & AS_FAULT_INFO_OVER_VOLTAGE) | 
 | 280 | 		*fault |= LED_FAULT_INPUT_VOLTAGE; | 
 | 281 |  | 
 | 282 | 	return rval; | 
 | 283 | } | 
 | 284 |  | 
 | 285 | static unsigned int __as3645a_current_to_reg(unsigned int min, unsigned int max, | 
 | 286 | 					     unsigned int step, | 
 | 287 | 					     unsigned int val) | 
 | 288 | { | 
 | 289 | 	if (val < min) | 
 | 290 | 		val = min; | 
 | 291 |  | 
 | 292 | 	if (val > max) | 
 | 293 | 		val = max; | 
 | 294 |  | 
 | 295 | 	return (val - min) / step; | 
 | 296 | } | 
 | 297 |  | 
 | 298 | static unsigned int as3645a_current_to_reg(struct as3645a *flash, bool is_flash, | 
 | 299 | 					   unsigned int ua) | 
 | 300 | { | 
 | 301 | 	if (is_flash) | 
 | 302 | 		return __as3645a_current_to_reg(AS_TORCH_INTENSITY_MIN, | 
 | 303 | 						flash->cfg.assist_max_ua, | 
 | 304 | 						AS_TORCH_INTENSITY_STEP, ua); | 
 | 305 | 	else | 
 | 306 | 		return __as3645a_current_to_reg(AS_FLASH_INTENSITY_MIN, | 
 | 307 | 						flash->cfg.flash_max_ua, | 
 | 308 | 						AS_FLASH_INTENSITY_STEP, ua); | 
 | 309 | } | 
 | 310 |  | 
 | 311 | static int as3645a_set_indicator_brightness(struct led_classdev *iled_cdev, | 
 | 312 | 					    enum led_brightness brightness) | 
 | 313 | { | 
 | 314 | 	struct as3645a *flash = iled_cdev_to_as3645a(iled_cdev); | 
 | 315 | 	int rval; | 
 | 316 |  | 
 | 317 | 	flash->indicator_current = brightness; | 
 | 318 |  | 
 | 319 | 	rval = as3645a_set_timeout(flash); | 
 | 320 | 	if (rval) | 
 | 321 | 		return rval; | 
 | 322 |  | 
 | 323 | 	return as3645a_set_control(flash, AS_MODE_INDICATOR, brightness); | 
 | 324 | } | 
 | 325 |  | 
 | 326 | static int as3645a_set_assist_brightness(struct led_classdev *fled_cdev, | 
 | 327 | 					 enum led_brightness brightness) | 
 | 328 | { | 
 | 329 | 	struct led_classdev_flash *fled = lcdev_to_flcdev(fled_cdev); | 
 | 330 | 	struct as3645a *flash = fled_to_as3645a(fled); | 
 | 331 | 	int rval; | 
 | 332 |  | 
 | 333 | 	if (brightness) { | 
 | 334 | 		/* Register value 0 is 20 mA. */ | 
 | 335 | 		flash->assist_current = brightness - 1; | 
 | 336 |  | 
 | 337 | 		rval = as3645a_set_current(flash); | 
 | 338 | 		if (rval) | 
 | 339 | 			return rval; | 
 | 340 | 	} | 
 | 341 |  | 
 | 342 | 	return as3645a_set_control(flash, AS_MODE_ASSIST, brightness); | 
 | 343 | } | 
 | 344 |  | 
 | 345 | static int as3645a_set_flash_brightness(struct led_classdev_flash *fled, | 
 | 346 | 					u32 brightness_ua) | 
 | 347 | { | 
 | 348 | 	struct as3645a *flash = fled_to_as3645a(fled); | 
 | 349 |  | 
 | 350 | 	flash->flash_current = as3645a_current_to_reg(flash, true, | 
 | 351 | 						      brightness_ua); | 
 | 352 |  | 
 | 353 | 	return as3645a_set_current(flash); | 
 | 354 | } | 
 | 355 |  | 
 | 356 | static int as3645a_set_flash_timeout(struct led_classdev_flash *fled, | 
 | 357 | 				     u32 timeout_us) | 
 | 358 | { | 
 | 359 | 	struct as3645a *flash = fled_to_as3645a(fled); | 
 | 360 |  | 
 | 361 | 	flash->timeout = AS_TIMER_US_TO_CODE(timeout_us); | 
 | 362 |  | 
 | 363 | 	return as3645a_set_timeout(flash); | 
 | 364 | } | 
 | 365 |  | 
 | 366 | static int as3645a_set_strobe(struct led_classdev_flash *fled, bool state) | 
 | 367 | { | 
 | 368 | 	struct as3645a *flash = fled_to_as3645a(fled); | 
 | 369 |  | 
 | 370 | 	return as3645a_set_control(flash, AS_MODE_FLASH, state); | 
 | 371 | } | 
 | 372 |  | 
 | 373 | static const struct led_flash_ops as3645a_led_flash_ops = { | 
 | 374 | 	.flash_brightness_set = as3645a_set_flash_brightness, | 
 | 375 | 	.timeout_set = as3645a_set_flash_timeout, | 
 | 376 | 	.strobe_set = as3645a_set_strobe, | 
 | 377 | 	.fault_get = as3645a_get_fault, | 
 | 378 | }; | 
 | 379 |  | 
 | 380 | static int as3645a_setup(struct as3645a *flash) | 
 | 381 | { | 
 | 382 | 	struct device *dev = &flash->client->dev; | 
 | 383 | 	u32 fault = 0; | 
 | 384 | 	int rval; | 
 | 385 |  | 
 | 386 | 	/* clear errors */ | 
 | 387 | 	rval = as3645a_read(flash, AS_FAULT_INFO_REG); | 
 | 388 | 	if (rval < 0) | 
 | 389 | 		return rval; | 
 | 390 |  | 
 | 391 | 	dev_dbg(dev, "Fault info: %02x\n", rval); | 
 | 392 |  | 
 | 393 | 	rval = as3645a_set_current(flash); | 
 | 394 | 	if (rval < 0) | 
 | 395 | 		return rval; | 
 | 396 |  | 
 | 397 | 	rval = as3645a_set_timeout(flash); | 
 | 398 | 	if (rval < 0) | 
 | 399 | 		return rval; | 
 | 400 |  | 
 | 401 | 	rval = as3645a_set_control(flash, AS_MODE_INDICATOR, false); | 
 | 402 | 	if (rval < 0) | 
 | 403 | 		return rval; | 
 | 404 |  | 
 | 405 | 	/* read status */ | 
 | 406 | 	rval = as3645a_get_fault(&flash->fled, &fault); | 
 | 407 | 	if (rval < 0) | 
 | 408 | 		return rval; | 
 | 409 |  | 
 | 410 | 	dev_dbg(dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", | 
 | 411 | 		as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); | 
 | 412 | 	dev_dbg(dev, "AS_CURRENT_SET_REG: %02x\n", | 
 | 413 | 		as3645a_read(flash, AS_CURRENT_SET_REG)); | 
 | 414 | 	dev_dbg(dev, "AS_CONTROL_REG: %02x\n", | 
 | 415 | 		as3645a_read(flash, AS_CONTROL_REG)); | 
 | 416 |  | 
 | 417 | 	return rval & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; | 
 | 418 | } | 
 | 419 |  | 
 | 420 | static int as3645a_detect(struct as3645a *flash) | 
 | 421 | { | 
 | 422 | 	struct device *dev = &flash->client->dev; | 
 | 423 | 	int rval, man, model, rfu, version; | 
 | 424 | 	const char *vendor; | 
 | 425 |  | 
 | 426 | 	rval = as3645a_read(flash, AS_DESIGN_INFO_REG); | 
 | 427 | 	if (rval < 0) { | 
 | 428 | 		dev_err(dev, "can't read design info reg\n"); | 
 | 429 | 		return rval; | 
 | 430 | 	} | 
 | 431 |  | 
 | 432 | 	man = AS_DESIGN_INFO_FACTORY(rval); | 
 | 433 | 	model = AS_DESIGN_INFO_MODEL(rval); | 
 | 434 |  | 
 | 435 | 	rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); | 
 | 436 | 	if (rval < 0) { | 
 | 437 | 		dev_err(dev, "can't read version control reg\n"); | 
 | 438 | 		return rval; | 
 | 439 | 	} | 
 | 440 |  | 
 | 441 | 	rfu = AS_VERSION_CONTROL_RFU(rval); | 
 | 442 | 	version = AS_VERSION_CONTROL_VERSION(rval); | 
 | 443 |  | 
 | 444 | 	/* Verify the chip model and version. */ | 
 | 445 | 	if (model != 0x01 || rfu != 0x00) { | 
 | 446 | 		dev_err(dev, "AS3645A not detected (model %d rfu %d)\n", | 
 | 447 | 			model, rfu); | 
 | 448 | 		return -ENODEV; | 
 | 449 | 	} | 
 | 450 |  | 
 | 451 | 	switch (man) { | 
 | 452 | 	case 1: | 
 | 453 | 		vendor = "AMS, Austria Micro Systems"; | 
 | 454 | 		break; | 
 | 455 | 	case 2: | 
 | 456 | 		vendor = "ADI, Analog Devices Inc."; | 
 | 457 | 		break; | 
 | 458 | 	case 3: | 
 | 459 | 		vendor = "NSC, National Semiconductor"; | 
 | 460 | 		break; | 
 | 461 | 	case 4: | 
 | 462 | 		vendor = "NXP"; | 
 | 463 | 		break; | 
 | 464 | 	case 5: | 
 | 465 | 		vendor = "TI, Texas Instrument"; | 
 | 466 | 		break; | 
 | 467 | 	default: | 
 | 468 | 		vendor = "Unknown"; | 
 | 469 | 	} | 
 | 470 |  | 
 | 471 | 	dev_info(dev, "Chip vendor: %s (%d) Version: %d\n", vendor, | 
 | 472 | 		 man, version); | 
 | 473 |  | 
 | 474 | 	rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); | 
 | 475 | 	if (rval < 0) | 
 | 476 | 		return rval; | 
 | 477 |  | 
 | 478 | 	return as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); | 
 | 479 | } | 
 | 480 |  | 
 | 481 | static int as3645a_parse_node(struct as3645a *flash, | 
 | 482 | 			      struct fwnode_handle *fwnode) | 
 | 483 | { | 
 | 484 | 	struct as3645a_config *cfg = &flash->cfg; | 
 | 485 | 	struct fwnode_handle *child; | 
 | 486 | 	int rval; | 
 | 487 |  | 
 | 488 | 	fwnode_for_each_child_node(fwnode, child) { | 
 | 489 | 		u32 id = 0; | 
 | 490 |  | 
 | 491 | 		fwnode_property_read_u32(child, "reg", &id); | 
 | 492 |  | 
 | 493 | 		switch (id) { | 
 | 494 | 		case AS_LED_FLASH: | 
 | 495 | 			flash->flash_node = child; | 
 | 496 | 			break; | 
 | 497 | 		case AS_LED_INDICATOR: | 
 | 498 | 			flash->indicator_node = child; | 
 | 499 | 			break; | 
 | 500 | 		default: | 
 | 501 | 			dev_warn(&flash->client->dev, | 
 | 502 | 				 "unknown LED %u encountered, ignoring\n", id); | 
 | 503 | 			break; | 
 | 504 | 		} | 
 | 505 | 		fwnode_handle_get(child); | 
 | 506 | 	} | 
 | 507 |  | 
 | 508 | 	if (!flash->flash_node) { | 
 | 509 | 		dev_err(&flash->client->dev, "can't find flash node\n"); | 
 | 510 | 		return -ENODEV; | 
 | 511 | 	} | 
 | 512 |  | 
 | 513 | 	rval = fwnode_property_read_u32(flash->flash_node, "flash-timeout-us", | 
 | 514 | 					&cfg->flash_timeout_us); | 
 | 515 | 	if (rval < 0) { | 
 | 516 | 		dev_err(&flash->client->dev, | 
 | 517 | 			"can't read flash-timeout-us property for flash\n"); | 
 | 518 | 		goto out_err; | 
 | 519 | 	} | 
 | 520 |  | 
 | 521 | 	rval = fwnode_property_read_u32(flash->flash_node, "flash-max-microamp", | 
 | 522 | 					&cfg->flash_max_ua); | 
 | 523 | 	if (rval < 0) { | 
 | 524 | 		dev_err(&flash->client->dev, | 
 | 525 | 			"can't read flash-max-microamp property for flash\n"); | 
 | 526 | 		goto out_err; | 
 | 527 | 	} | 
 | 528 |  | 
 | 529 | 	rval = fwnode_property_read_u32(flash->flash_node, "led-max-microamp", | 
 | 530 | 					&cfg->assist_max_ua); | 
 | 531 | 	if (rval < 0) { | 
 | 532 | 		dev_err(&flash->client->dev, | 
 | 533 | 			"can't read led-max-microamp property for flash\n"); | 
 | 534 | 		goto out_err; | 
 | 535 | 	} | 
 | 536 |  | 
 | 537 | 	fwnode_property_read_u32(flash->flash_node, "voltage-reference", | 
 | 538 | 				 &cfg->voltage_reference); | 
 | 539 |  | 
 | 540 | 	fwnode_property_read_u32(flash->flash_node, "ams,input-max-microamp", | 
 | 541 | 				 &cfg->peak); | 
 | 542 | 	cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak); | 
 | 543 |  | 
 | 544 | 	if (!flash->indicator_node) { | 
 | 545 | 		dev_warn(&flash->client->dev, | 
 | 546 | 			 "can't find indicator node\n"); | 
 | 547 | 		rval = -ENODEV; | 
 | 548 | 		goto out_err; | 
 | 549 | 	} | 
 | 550 |  | 
 | 551 |  | 
 | 552 | 	rval = fwnode_property_read_u32(flash->indicator_node, | 
 | 553 | 					"led-max-microamp", | 
 | 554 | 					&cfg->indicator_max_ua); | 
 | 555 | 	if (rval < 0) { | 
 | 556 | 		dev_err(&flash->client->dev, | 
 | 557 | 			"can't read led-max-microamp property for indicator\n"); | 
 | 558 | 		goto out_err; | 
 | 559 | 	} | 
 | 560 |  | 
 | 561 | 	return 0; | 
 | 562 |  | 
 | 563 | out_err: | 
 | 564 | 	fwnode_handle_put(flash->flash_node); | 
 | 565 | 	fwnode_handle_put(flash->indicator_node); | 
 | 566 |  | 
 | 567 | 	return rval; | 
 | 568 | } | 
 | 569 |  | 
 | 570 | static int as3645a_led_class_setup(struct as3645a *flash) | 
 | 571 | { | 
 | 572 | 	struct led_classdev *fled_cdev = &flash->fled.led_cdev; | 
 | 573 | 	struct led_classdev *iled_cdev = &flash->iled_cdev; | 
 | 574 | 	struct led_init_data init_data = {}; | 
 | 575 | 	struct led_flash_setting *cfg; | 
 | 576 | 	int rval; | 
 | 577 |  | 
 | 578 | 	iled_cdev->brightness_set_blocking = as3645a_set_indicator_brightness; | 
 | 579 | 	iled_cdev->max_brightness = | 
 | 580 | 		flash->cfg.indicator_max_ua / AS_INDICATOR_INTENSITY_STEP; | 
 | 581 | 	iled_cdev->flags = LED_CORE_SUSPENDRESUME; | 
 | 582 |  | 
 | 583 | 	init_data.fwnode = flash->indicator_node; | 
 | 584 | 	init_data.devicename = AS_NAME; | 
 | 585 | 	init_data.default_label = "indicator"; | 
 | 586 |  | 
 | 587 | 	rval = led_classdev_register_ext(&flash->client->dev, iled_cdev, | 
 | 588 | 					 &init_data); | 
 | 589 | 	if (rval < 0) | 
 | 590 | 		return rval; | 
 | 591 |  | 
 | 592 | 	cfg = &flash->fled.brightness; | 
 | 593 | 	cfg->min = AS_FLASH_INTENSITY_MIN; | 
 | 594 | 	cfg->max = flash->cfg.flash_max_ua; | 
 | 595 | 	cfg->step = AS_FLASH_INTENSITY_STEP; | 
 | 596 | 	cfg->val = flash->cfg.flash_max_ua; | 
 | 597 |  | 
 | 598 | 	cfg = &flash->fled.timeout; | 
 | 599 | 	cfg->min = AS_FLASH_TIMEOUT_MIN; | 
 | 600 | 	cfg->max = flash->cfg.flash_timeout_us; | 
 | 601 | 	cfg->step = AS_FLASH_TIMEOUT_STEP; | 
 | 602 | 	cfg->val = flash->cfg.flash_timeout_us; | 
 | 603 |  | 
 | 604 | 	flash->fled.ops = &as3645a_led_flash_ops; | 
 | 605 |  | 
 | 606 | 	fled_cdev->brightness_set_blocking = as3645a_set_assist_brightness; | 
 | 607 | 	/* Value 0 is off in LED class. */ | 
 | 608 | 	fled_cdev->max_brightness = | 
 | 609 | 		as3645a_current_to_reg(flash, false, | 
 | 610 | 				       flash->cfg.assist_max_ua) + 1; | 
 | 611 | 	fled_cdev->flags = LED_DEV_CAP_FLASH | LED_CORE_SUSPENDRESUME; | 
 | 612 |  | 
 | 613 | 	init_data.fwnode = flash->flash_node; | 
 | 614 | 	init_data.devicename = AS_NAME; | 
 | 615 | 	init_data.default_label = "flash"; | 
 | 616 |  | 
 | 617 | 	rval = led_classdev_flash_register_ext(&flash->client->dev, | 
 | 618 | 					       &flash->fled, &init_data); | 
 | 619 | 	if (rval) | 
 | 620 | 		goto out_err; | 
 | 621 |  | 
 | 622 | 	return rval; | 
 | 623 |  | 
 | 624 | out_err: | 
 | 625 | 	led_classdev_unregister(iled_cdev); | 
 | 626 | 	dev_err(&flash->client->dev, | 
 | 627 | 		"led_classdev_flash_register() failed, error %d\n", | 
 | 628 | 		rval); | 
 | 629 | 	return rval; | 
 | 630 | } | 
 | 631 |  | 
 | 632 | static int as3645a_v4l2_setup(struct as3645a *flash) | 
 | 633 | { | 
 | 634 | 	struct led_classdev_flash *fled = &flash->fled; | 
 | 635 | 	struct led_classdev *led = &fled->led_cdev; | 
 | 636 | 	struct v4l2_flash_config cfg = { | 
 | 637 | 		.intensity = { | 
 | 638 | 			.min = AS_TORCH_INTENSITY_MIN, | 
 | 639 | 			.max = flash->cfg.assist_max_ua, | 
 | 640 | 			.step = AS_TORCH_INTENSITY_STEP, | 
 | 641 | 			.val = flash->cfg.assist_max_ua, | 
 | 642 | 		}, | 
 | 643 | 	}; | 
 | 644 | 	struct v4l2_flash_config cfgind = { | 
 | 645 | 		.intensity = { | 
 | 646 | 			.min = AS_INDICATOR_INTENSITY_MIN, | 
 | 647 | 			.max = flash->cfg.indicator_max_ua, | 
 | 648 | 			.step = AS_INDICATOR_INTENSITY_STEP, | 
 | 649 | 			.val = flash->cfg.indicator_max_ua, | 
 | 650 | 		}, | 
 | 651 | 	}; | 
 | 652 |  | 
 | 653 | 	strlcpy(cfg.dev_name, led->dev->kobj.name, sizeof(cfg.dev_name)); | 
 | 654 | 	strlcpy(cfgind.dev_name, flash->iled_cdev.dev->kobj.name, | 
 | 655 | 		sizeof(cfgind.dev_name)); | 
 | 656 |  | 
 | 657 | 	flash->vf = v4l2_flash_init( | 
 | 658 | 		&flash->client->dev, flash->flash_node, &flash->fled, NULL, | 
 | 659 | 		&cfg); | 
 | 660 | 	if (IS_ERR(flash->vf)) | 
 | 661 | 		return PTR_ERR(flash->vf); | 
 | 662 |  | 
 | 663 | 	flash->vfind = v4l2_flash_indicator_init( | 
 | 664 | 		&flash->client->dev, flash->indicator_node, &flash->iled_cdev, | 
 | 665 | 		&cfgind); | 
 | 666 | 	if (IS_ERR(flash->vfind)) { | 
 | 667 | 		v4l2_flash_release(flash->vf); | 
 | 668 | 		return PTR_ERR(flash->vfind); | 
 | 669 | 	} | 
 | 670 |  | 
 | 671 | 	return 0; | 
 | 672 | } | 
 | 673 |  | 
 | 674 | static int as3645a_probe(struct i2c_client *client) | 
 | 675 | { | 
 | 676 | 	struct as3645a *flash; | 
 | 677 | 	int rval; | 
 | 678 |  | 
 | 679 | 	if (!dev_fwnode(&client->dev)) | 
 | 680 | 		return -ENODEV; | 
 | 681 |  | 
 | 682 | 	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); | 
 | 683 | 	if (flash == NULL) | 
 | 684 | 		return -ENOMEM; | 
 | 685 |  | 
 | 686 | 	flash->client = client; | 
 | 687 |  | 
 | 688 | 	rval = as3645a_parse_node(flash, dev_fwnode(&client->dev)); | 
 | 689 | 	if (rval < 0) | 
 | 690 | 		return rval; | 
 | 691 |  | 
 | 692 | 	rval = as3645a_detect(flash); | 
 | 693 | 	if (rval < 0) | 
 | 694 | 		goto out_put_nodes; | 
 | 695 |  | 
 | 696 | 	mutex_init(&flash->mutex); | 
 | 697 | 	i2c_set_clientdata(client, flash); | 
 | 698 |  | 
 | 699 | 	rval = as3645a_setup(flash); | 
 | 700 | 	if (rval) | 
 | 701 | 		goto out_mutex_destroy; | 
 | 702 |  | 
 | 703 | 	rval = as3645a_led_class_setup(flash); | 
 | 704 | 	if (rval) | 
 | 705 | 		goto out_mutex_destroy; | 
 | 706 |  | 
 | 707 | 	rval = as3645a_v4l2_setup(flash); | 
 | 708 | 	if (rval) | 
 | 709 | 		goto out_led_classdev_flash_unregister; | 
 | 710 |  | 
 | 711 | 	return 0; | 
 | 712 |  | 
 | 713 | out_led_classdev_flash_unregister: | 
 | 714 | 	led_classdev_flash_unregister(&flash->fled); | 
 | 715 |  | 
 | 716 | out_mutex_destroy: | 
 | 717 | 	mutex_destroy(&flash->mutex); | 
 | 718 |  | 
 | 719 | out_put_nodes: | 
 | 720 | 	fwnode_handle_put(flash->flash_node); | 
 | 721 | 	fwnode_handle_put(flash->indicator_node); | 
 | 722 |  | 
 | 723 | 	return rval; | 
 | 724 | } | 
 | 725 |  | 
 | 726 | static int as3645a_remove(struct i2c_client *client) | 
 | 727 | { | 
 | 728 | 	struct as3645a *flash = i2c_get_clientdata(client); | 
 | 729 |  | 
 | 730 | 	as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); | 
 | 731 |  | 
 | 732 | 	v4l2_flash_release(flash->vf); | 
 | 733 | 	v4l2_flash_release(flash->vfind); | 
 | 734 |  | 
 | 735 | 	led_classdev_flash_unregister(&flash->fled); | 
 | 736 | 	led_classdev_unregister(&flash->iled_cdev); | 
 | 737 |  | 
 | 738 | 	mutex_destroy(&flash->mutex); | 
 | 739 |  | 
 | 740 | 	fwnode_handle_put(flash->flash_node); | 
 | 741 | 	fwnode_handle_put(flash->indicator_node); | 
 | 742 |  | 
 | 743 | 	return 0; | 
 | 744 | } | 
 | 745 |  | 
 | 746 | static const struct i2c_device_id as3645a_id_table[] = { | 
 | 747 | 	{ AS_NAME, 0 }, | 
 | 748 | 	{ }, | 
 | 749 | }; | 
 | 750 | MODULE_DEVICE_TABLE(i2c, as3645a_id_table); | 
 | 751 |  | 
 | 752 | static const struct of_device_id as3645a_of_table[] = { | 
 | 753 | 	{ .compatible = "ams,as3645a" }, | 
 | 754 | 	{ }, | 
 | 755 | }; | 
 | 756 | MODULE_DEVICE_TABLE(of, as3645a_of_table); | 
 | 757 |  | 
 | 758 | static struct i2c_driver as3645a_i2c_driver = { | 
 | 759 | 	.driver	= { | 
 | 760 | 		.of_match_table = as3645a_of_table, | 
 | 761 | 		.name = AS_NAME, | 
 | 762 | 	}, | 
 | 763 | 	.probe_new	= as3645a_probe, | 
 | 764 | 	.remove	= as3645a_remove, | 
 | 765 | 	.id_table = as3645a_id_table, | 
 | 766 | }; | 
 | 767 |  | 
 | 768 | module_i2c_driver(as3645a_i2c_driver); | 
 | 769 |  | 
 | 770 | MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | 
 | 771 | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>"); | 
 | 772 | MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); | 
 | 773 | MODULE_LICENSE("GPL v2"); |