| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Driver for the Atmel PIO4 controller |
| 4 | * |
| 5 | * Copyright (C) 2015 Atmel, |
| 6 | * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> |
| 7 | */ |
| 8 | |
| 9 | #include <dt-bindings/pinctrl/at91.h> |
| 10 | #include <linux/clk.h> |
| 11 | #include <linux/gpio/driver.h> |
| 12 | #include <linux/interrupt.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/pinctrl/pinconf.h> |
| 18 | #include <linux/pinctrl/pinconf-generic.h> |
| 19 | #include <linux/pinctrl/pinctrl.h> |
| 20 | #include <linux/pinctrl/pinmux.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include "core.h" |
| 23 | #include "pinconf.h" |
| 24 | #include "pinctrl-utils.h" |
| 25 | |
| 26 | /* |
| 27 | * Warning: |
| 28 | * In order to not introduce confusion between Atmel PIO groups and pinctrl |
| 29 | * framework groups, Atmel PIO groups will be called banks, line is kept to |
| 30 | * designed the pin id into this bank. |
| 31 | */ |
| 32 | |
| 33 | #define ATMEL_PIO_MSKR 0x0000 |
| 34 | #define ATMEL_PIO_CFGR 0x0004 |
| 35 | #define ATMEL_PIO_CFGR_FUNC_MASK GENMASK(2, 0) |
| 36 | #define ATMEL_PIO_DIR_MASK BIT(8) |
| 37 | #define ATMEL_PIO_PUEN_MASK BIT(9) |
| 38 | #define ATMEL_PIO_PDEN_MASK BIT(10) |
| 39 | #define ATMEL_PIO_IFEN_MASK BIT(12) |
| 40 | #define ATMEL_PIO_IFSCEN_MASK BIT(13) |
| 41 | #define ATMEL_PIO_OPD_MASK BIT(14) |
| 42 | #define ATMEL_PIO_SCHMITT_MASK BIT(15) |
| 43 | #define ATMEL_PIO_DRVSTR_MASK GENMASK(17, 16) |
| 44 | #define ATMEL_PIO_DRVSTR_OFFSET 16 |
| 45 | #define ATMEL_PIO_CFGR_EVTSEL_MASK GENMASK(26, 24) |
| 46 | #define ATMEL_PIO_CFGR_EVTSEL_FALLING (0 << 24) |
| 47 | #define ATMEL_PIO_CFGR_EVTSEL_RISING (1 << 24) |
| 48 | #define ATMEL_PIO_CFGR_EVTSEL_BOTH (2 << 24) |
| 49 | #define ATMEL_PIO_CFGR_EVTSEL_LOW (3 << 24) |
| 50 | #define ATMEL_PIO_CFGR_EVTSEL_HIGH (4 << 24) |
| 51 | #define ATMEL_PIO_PDSR 0x0008 |
| 52 | #define ATMEL_PIO_LOCKSR 0x000C |
| 53 | #define ATMEL_PIO_SODR 0x0010 |
| 54 | #define ATMEL_PIO_CODR 0x0014 |
| 55 | #define ATMEL_PIO_ODSR 0x0018 |
| 56 | #define ATMEL_PIO_IER 0x0020 |
| 57 | #define ATMEL_PIO_IDR 0x0024 |
| 58 | #define ATMEL_PIO_IMR 0x0028 |
| 59 | #define ATMEL_PIO_ISR 0x002C |
| 60 | #define ATMEL_PIO_IOFR 0x003C |
| 61 | |
| 62 | #define ATMEL_PIO_NPINS_PER_BANK 32 |
| 63 | #define ATMEL_PIO_BANK(pin_id) (pin_id / ATMEL_PIO_NPINS_PER_BANK) |
| 64 | #define ATMEL_PIO_LINE(pin_id) (pin_id % ATMEL_PIO_NPINS_PER_BANK) |
| 65 | #define ATMEL_PIO_BANK_OFFSET 0x40 |
| 66 | |
| 67 | #define ATMEL_GET_PIN_NO(pinfunc) ((pinfunc) & 0xff) |
| 68 | #define ATMEL_GET_PIN_FUNC(pinfunc) ((pinfunc >> 16) & 0xf) |
| 69 | #define ATMEL_GET_PIN_IOSET(pinfunc) ((pinfunc >> 20) & 0xf) |
| 70 | |
| 71 | /* Custom pinconf parameters */ |
| 72 | #define ATMEL_PIN_CONFIG_DRIVE_STRENGTH (PIN_CONFIG_END + 1) |
| 73 | |
| 74 | struct atmel_pioctrl_data { |
| 75 | unsigned nbanks; |
| 76 | }; |
| 77 | |
| 78 | struct atmel_group { |
| 79 | const char *name; |
| 80 | u32 pin; |
| 81 | }; |
| 82 | |
| 83 | struct atmel_pin { |
| 84 | unsigned pin_id; |
| 85 | unsigned mux; |
| 86 | unsigned ioset; |
| 87 | unsigned bank; |
| 88 | unsigned line; |
| 89 | const char *device; |
| 90 | }; |
| 91 | |
| 92 | /** |
| 93 | * struct atmel_pioctrl - Atmel PIO controller (pinmux + gpio) |
| 94 | * @reg_base: base address of the controller. |
| 95 | * @clk: clock of the controller. |
| 96 | * @nbanks: number of PIO groups, it can vary depending on the SoC. |
| 97 | * @pinctrl_dev: pinctrl device registered. |
| 98 | * @groups: groups table to provide group name and pin in the group to pinctrl. |
| 99 | * @group_names: group names table to provide all the group/pin names to |
| 100 | * pinctrl or gpio. |
| 101 | * @pins: pins table used for both pinctrl and gpio. pin_id, bank and line |
| 102 | * fields are set at probe time. Other ones are set when parsing dt |
| 103 | * pinctrl. |
| 104 | * @npins: number of pins. |
| 105 | * @gpio_chip: gpio chip registered. |
| 106 | * @irq_domain: irq domain for the gpio controller. |
| 107 | * @irqs: table containing the hw irq number of the bank. The index of the |
| 108 | * table is the bank id. |
| 109 | * @dev: device entry for the Atmel PIO controller. |
| 110 | * @node: node of the Atmel PIO controller. |
| 111 | */ |
| 112 | struct atmel_pioctrl { |
| 113 | void __iomem *reg_base; |
| 114 | struct clk *clk; |
| 115 | unsigned nbanks; |
| 116 | struct pinctrl_dev *pinctrl_dev; |
| 117 | struct atmel_group *groups; |
| 118 | const char * const *group_names; |
| 119 | struct atmel_pin **pins; |
| 120 | unsigned npins; |
| 121 | struct gpio_chip *gpio_chip; |
| 122 | struct irq_domain *irq_domain; |
| 123 | int *irqs; |
| 124 | unsigned *pm_wakeup_sources; |
| 125 | struct { |
| 126 | u32 imr; |
| 127 | u32 odsr; |
| 128 | u32 cfgr[ATMEL_PIO_NPINS_PER_BANK]; |
| 129 | } *pm_suspend_backup; |
| 130 | struct device *dev; |
| 131 | struct device_node *node; |
| 132 | }; |
| 133 | |
| 134 | static const char * const atmel_functions[] = { |
| 135 | "GPIO", "A", "B", "C", "D", "E", "F", "G" |
| 136 | }; |
| 137 | |
| 138 | static const struct pinconf_generic_params atmel_custom_bindings[] = { |
| 139 | {"atmel,drive-strength", ATMEL_PIN_CONFIG_DRIVE_STRENGTH, 0}, |
| 140 | }; |
| 141 | |
| 142 | /* --- GPIO --- */ |
| 143 | static unsigned int atmel_gpio_read(struct atmel_pioctrl *atmel_pioctrl, |
| 144 | unsigned int bank, unsigned int reg) |
| 145 | { |
| 146 | return readl_relaxed(atmel_pioctrl->reg_base |
| 147 | + ATMEL_PIO_BANK_OFFSET * bank + reg); |
| 148 | } |
| 149 | |
| 150 | static void atmel_gpio_write(struct atmel_pioctrl *atmel_pioctrl, |
| 151 | unsigned int bank, unsigned int reg, |
| 152 | unsigned int val) |
| 153 | { |
| 154 | writel_relaxed(val, atmel_pioctrl->reg_base |
| 155 | + ATMEL_PIO_BANK_OFFSET * bank + reg); |
| 156 | } |
| 157 | |
| 158 | static void atmel_gpio_irq_ack(struct irq_data *d) |
| 159 | { |
| 160 | /* |
| 161 | * Nothing to do, interrupt is cleared when reading the status |
| 162 | * register. |
| 163 | */ |
| 164 | } |
| 165 | |
| 166 | static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned type) |
| 167 | { |
| 168 | struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d); |
| 169 | struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq]; |
| 170 | unsigned reg; |
| 171 | |
| 172 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR, |
| 173 | BIT(pin->line)); |
| 174 | reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR); |
| 175 | reg &= (~ATMEL_PIO_CFGR_EVTSEL_MASK); |
| 176 | |
| 177 | switch (type) { |
| 178 | case IRQ_TYPE_EDGE_RISING: |
| 179 | irq_set_handler_locked(d, handle_edge_irq); |
| 180 | reg |= ATMEL_PIO_CFGR_EVTSEL_RISING; |
| 181 | break; |
| 182 | case IRQ_TYPE_EDGE_FALLING: |
| 183 | irq_set_handler_locked(d, handle_edge_irq); |
| 184 | reg |= ATMEL_PIO_CFGR_EVTSEL_FALLING; |
| 185 | break; |
| 186 | case IRQ_TYPE_EDGE_BOTH: |
| 187 | irq_set_handler_locked(d, handle_edge_irq); |
| 188 | reg |= ATMEL_PIO_CFGR_EVTSEL_BOTH; |
| 189 | break; |
| 190 | case IRQ_TYPE_LEVEL_LOW: |
| 191 | irq_set_handler_locked(d, handle_level_irq); |
| 192 | reg |= ATMEL_PIO_CFGR_EVTSEL_LOW; |
| 193 | break; |
| 194 | case IRQ_TYPE_LEVEL_HIGH: |
| 195 | irq_set_handler_locked(d, handle_level_irq); |
| 196 | reg |= ATMEL_PIO_CFGR_EVTSEL_HIGH; |
| 197 | break; |
| 198 | case IRQ_TYPE_NONE: |
| 199 | default: |
| 200 | return -EINVAL; |
| 201 | } |
| 202 | |
| 203 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg); |
| 204 | |
| 205 | return 0; |
| 206 | } |
| 207 | |
| 208 | static void atmel_gpio_irq_mask(struct irq_data *d) |
| 209 | { |
| 210 | struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d); |
| 211 | struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq]; |
| 212 | |
| 213 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_IDR, |
| 214 | BIT(pin->line)); |
| 215 | } |
| 216 | |
| 217 | static void atmel_gpio_irq_unmask(struct irq_data *d) |
| 218 | { |
| 219 | struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d); |
| 220 | struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq]; |
| 221 | |
| 222 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_IER, |
| 223 | BIT(pin->line)); |
| 224 | } |
| 225 | |
| 226 | #ifdef CONFIG_PM_SLEEP |
| 227 | |
| 228 | static int atmel_gpio_irq_set_wake(struct irq_data *d, unsigned int on) |
| 229 | { |
| 230 | struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d); |
| 231 | int bank = ATMEL_PIO_BANK(d->hwirq); |
| 232 | int line = ATMEL_PIO_LINE(d->hwirq); |
| 233 | |
| 234 | /* The gpio controller has one interrupt line per bank. */ |
| 235 | irq_set_irq_wake(atmel_pioctrl->irqs[bank], on); |
| 236 | |
| 237 | if (on) |
| 238 | atmel_pioctrl->pm_wakeup_sources[bank] |= BIT(line); |
| 239 | else |
| 240 | atmel_pioctrl->pm_wakeup_sources[bank] &= ~(BIT(line)); |
| 241 | |
| 242 | return 0; |
| 243 | } |
| 244 | #else |
| 245 | #define atmel_gpio_irq_set_wake NULL |
| 246 | #endif /* CONFIG_PM_SLEEP */ |
| 247 | |
| 248 | static struct irq_chip atmel_gpio_irq_chip = { |
| 249 | .name = "GPIO", |
| 250 | .irq_ack = atmel_gpio_irq_ack, |
| 251 | .irq_mask = atmel_gpio_irq_mask, |
| 252 | .irq_unmask = atmel_gpio_irq_unmask, |
| 253 | .irq_set_type = atmel_gpio_irq_set_type, |
| 254 | .irq_set_wake = atmel_gpio_irq_set_wake, |
| 255 | }; |
| 256 | |
| 257 | static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| 258 | { |
| 259 | struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); |
| 260 | |
| 261 | return irq_find_mapping(atmel_pioctrl->irq_domain, offset); |
| 262 | } |
| 263 | |
| 264 | static void atmel_gpio_irq_handler(struct irq_desc *desc) |
| 265 | { |
| 266 | unsigned int irq = irq_desc_get_irq(desc); |
| 267 | struct atmel_pioctrl *atmel_pioctrl = irq_desc_get_handler_data(desc); |
| 268 | struct irq_chip *chip = irq_desc_get_chip(desc); |
| 269 | unsigned long isr; |
| 270 | int n, bank = -1; |
| 271 | |
| 272 | /* Find from which bank is the irq received. */ |
| 273 | for (n = 0; n < atmel_pioctrl->nbanks; n++) { |
| 274 | if (atmel_pioctrl->irqs[n] == irq) { |
| 275 | bank = n; |
| 276 | break; |
| 277 | } |
| 278 | } |
| 279 | |
| 280 | if (bank < 0) { |
| 281 | dev_err(atmel_pioctrl->dev, |
| 282 | "no bank associated to irq %u\n", irq); |
| 283 | return; |
| 284 | } |
| 285 | |
| 286 | chained_irq_enter(chip, desc); |
| 287 | |
| 288 | for (;;) { |
| 289 | isr = (unsigned long)atmel_gpio_read(atmel_pioctrl, bank, |
| 290 | ATMEL_PIO_ISR); |
| 291 | isr &= (unsigned long)atmel_gpio_read(atmel_pioctrl, bank, |
| 292 | ATMEL_PIO_IMR); |
| 293 | if (!isr) |
| 294 | break; |
| 295 | |
| 296 | for_each_set_bit(n, &isr, BITS_PER_LONG) |
| 297 | generic_handle_irq(atmel_gpio_to_irq( |
| 298 | atmel_pioctrl->gpio_chip, |
| 299 | bank * ATMEL_PIO_NPINS_PER_BANK + n)); |
| 300 | } |
| 301 | |
| 302 | chained_irq_exit(chip, desc); |
| 303 | } |
| 304 | |
| 305 | static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| 306 | { |
| 307 | struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); |
| 308 | struct atmel_pin *pin = atmel_pioctrl->pins[offset]; |
| 309 | unsigned reg; |
| 310 | |
| 311 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR, |
| 312 | BIT(pin->line)); |
| 313 | reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR); |
| 314 | reg &= ~ATMEL_PIO_DIR_MASK; |
| 315 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg); |
| 316 | |
| 317 | return 0; |
| 318 | } |
| 319 | |
| 320 | static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 321 | { |
| 322 | struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); |
| 323 | struct atmel_pin *pin = atmel_pioctrl->pins[offset]; |
| 324 | unsigned reg; |
| 325 | |
| 326 | reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_PDSR); |
| 327 | |
| 328 | return !!(reg & BIT(pin->line)); |
| 329 | } |
| 330 | |
| 331 | static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| 332 | int value) |
| 333 | { |
| 334 | struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); |
| 335 | struct atmel_pin *pin = atmel_pioctrl->pins[offset]; |
| 336 | unsigned reg; |
| 337 | |
| 338 | atmel_gpio_write(atmel_pioctrl, pin->bank, |
| 339 | value ? ATMEL_PIO_SODR : ATMEL_PIO_CODR, |
| 340 | BIT(pin->line)); |
| 341 | |
| 342 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR, |
| 343 | BIT(pin->line)); |
| 344 | reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR); |
| 345 | reg |= ATMEL_PIO_DIR_MASK; |
| 346 | atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg); |
| 347 | |
| 348 | return 0; |
| 349 | } |
| 350 | |
| 351 | static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| 352 | { |
| 353 | struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); |
| 354 | struct atmel_pin *pin = atmel_pioctrl->pins[offset]; |
| 355 | |
| 356 | atmel_gpio_write(atmel_pioctrl, pin->bank, |
| 357 | val ? ATMEL_PIO_SODR : ATMEL_PIO_CODR, |
| 358 | BIT(pin->line)); |
| 359 | } |
| 360 | |
| 361 | static struct gpio_chip atmel_gpio_chip = { |
| 362 | .direction_input = atmel_gpio_direction_input, |
| 363 | .get = atmel_gpio_get, |
| 364 | .direction_output = atmel_gpio_direction_output, |
| 365 | .set = atmel_gpio_set, |
| 366 | .to_irq = atmel_gpio_to_irq, |
| 367 | .base = 0, |
| 368 | }; |
| 369 | |
| 370 | /* --- PINCTRL --- */ |
| 371 | static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev, |
| 372 | unsigned pin_id) |
| 373 | { |
| 374 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 375 | unsigned bank = atmel_pioctrl->pins[pin_id]->bank; |
| 376 | unsigned line = atmel_pioctrl->pins[pin_id]->line; |
| 377 | void __iomem *addr = atmel_pioctrl->reg_base |
| 378 | + bank * ATMEL_PIO_BANK_OFFSET; |
| 379 | |
| 380 | writel_relaxed(BIT(line), addr + ATMEL_PIO_MSKR); |
| 381 | /* Have to set MSKR first, to access the right pin CFGR. */ |
| 382 | wmb(); |
| 383 | |
| 384 | return readl_relaxed(addr + ATMEL_PIO_CFGR); |
| 385 | } |
| 386 | |
| 387 | static void atmel_pin_config_write(struct pinctrl_dev *pctldev, |
| 388 | unsigned pin_id, u32 conf) |
| 389 | { |
| 390 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 391 | unsigned bank = atmel_pioctrl->pins[pin_id]->bank; |
| 392 | unsigned line = atmel_pioctrl->pins[pin_id]->line; |
| 393 | void __iomem *addr = atmel_pioctrl->reg_base |
| 394 | + bank * ATMEL_PIO_BANK_OFFSET; |
| 395 | |
| 396 | writel_relaxed(BIT(line), addr + ATMEL_PIO_MSKR); |
| 397 | /* Have to set MSKR first, to access the right pin CFGR. */ |
| 398 | wmb(); |
| 399 | writel_relaxed(conf, addr + ATMEL_PIO_CFGR); |
| 400 | } |
| 401 | |
| 402 | static int atmel_pctl_get_groups_count(struct pinctrl_dev *pctldev) |
| 403 | { |
| 404 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 405 | |
| 406 | return atmel_pioctrl->npins; |
| 407 | } |
| 408 | |
| 409 | static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev, |
| 410 | unsigned selector) |
| 411 | { |
| 412 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 413 | |
| 414 | return atmel_pioctrl->groups[selector].name; |
| 415 | } |
| 416 | |
| 417 | static int atmel_pctl_get_group_pins(struct pinctrl_dev *pctldev, |
| 418 | unsigned selector, const unsigned **pins, |
| 419 | unsigned *num_pins) |
| 420 | { |
| 421 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 422 | |
| 423 | *pins = (unsigned *)&atmel_pioctrl->groups[selector].pin; |
| 424 | *num_pins = 1; |
| 425 | |
| 426 | return 0; |
| 427 | } |
| 428 | |
| 429 | static struct atmel_group * |
| 430 | atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned pin) |
| 431 | { |
| 432 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 433 | int i; |
| 434 | |
| 435 | for (i = 0; i < atmel_pioctrl->npins; i++) { |
| 436 | struct atmel_group *grp = atmel_pioctrl->groups + i; |
| 437 | |
| 438 | if (grp->pin == pin) |
| 439 | return grp; |
| 440 | } |
| 441 | |
| 442 | return NULL; |
| 443 | } |
| 444 | |
| 445 | static int atmel_pctl_xlate_pinfunc(struct pinctrl_dev *pctldev, |
| 446 | struct device_node *np, |
| 447 | u32 pinfunc, const char **grp_name, |
| 448 | const char **func_name) |
| 449 | { |
| 450 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 451 | unsigned pin_id, func_id; |
| 452 | struct atmel_group *grp; |
| 453 | |
| 454 | pin_id = ATMEL_GET_PIN_NO(pinfunc); |
| 455 | func_id = ATMEL_GET_PIN_FUNC(pinfunc); |
| 456 | |
| 457 | if (func_id >= ARRAY_SIZE(atmel_functions)) |
| 458 | return -EINVAL; |
| 459 | |
| 460 | *func_name = atmel_functions[func_id]; |
| 461 | |
| 462 | grp = atmel_pctl_find_group_by_pin(pctldev, pin_id); |
| 463 | if (!grp) |
| 464 | return -EINVAL; |
| 465 | *grp_name = grp->name; |
| 466 | |
| 467 | atmel_pioctrl->pins[pin_id]->mux = func_id; |
| 468 | atmel_pioctrl->pins[pin_id]->ioset = ATMEL_GET_PIN_IOSET(pinfunc); |
| 469 | /* Want the device name not the group one. */ |
| 470 | if (np->parent == atmel_pioctrl->node) |
| 471 | atmel_pioctrl->pins[pin_id]->device = np->name; |
| 472 | else |
| 473 | atmel_pioctrl->pins[pin_id]->device = np->parent->name; |
| 474 | |
| 475 | return 0; |
| 476 | } |
| 477 | |
| 478 | static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev, |
| 479 | struct device_node *np, |
| 480 | struct pinctrl_map **map, |
| 481 | unsigned *reserved_maps, |
| 482 | unsigned *num_maps) |
| 483 | { |
| 484 | unsigned num_pins, num_configs, reserve; |
| 485 | unsigned long *configs; |
| 486 | struct property *pins; |
| 487 | u32 pinfunc; |
| 488 | int ret, i; |
| 489 | |
| 490 | pins = of_find_property(np, "pinmux", NULL); |
| 491 | if (!pins) |
| 492 | return -EINVAL; |
| 493 | |
| 494 | ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, |
| 495 | &num_configs); |
| 496 | if (ret < 0) { |
| 497 | dev_err(pctldev->dev, "%pOF: could not parse node property\n", |
| 498 | np); |
| 499 | return ret; |
| 500 | } |
| 501 | |
| 502 | num_pins = pins->length / sizeof(u32); |
| 503 | if (!num_pins) { |
| 504 | dev_err(pctldev->dev, "no pins found in node %pOF\n", np); |
| 505 | ret = -EINVAL; |
| 506 | goto exit; |
| 507 | } |
| 508 | |
| 509 | /* |
| 510 | * Reserve maps, at least there is a mux map and an optional conf |
| 511 | * map for each pin. |
| 512 | */ |
| 513 | reserve = 1; |
| 514 | if (num_configs) |
| 515 | reserve++; |
| 516 | reserve *= num_pins; |
| 517 | ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps, |
| 518 | reserve); |
| 519 | if (ret < 0) |
| 520 | goto exit; |
| 521 | |
| 522 | for (i = 0; i < num_pins; i++) { |
| 523 | const char *group, *func; |
| 524 | |
| 525 | ret = of_property_read_u32_index(np, "pinmux", i, &pinfunc); |
| 526 | if (ret) |
| 527 | goto exit; |
| 528 | |
| 529 | ret = atmel_pctl_xlate_pinfunc(pctldev, np, pinfunc, &group, |
| 530 | &func); |
| 531 | if (ret) |
| 532 | goto exit; |
| 533 | |
| 534 | pinctrl_utils_add_map_mux(pctldev, map, reserved_maps, num_maps, |
| 535 | group, func); |
| 536 | |
| 537 | if (num_configs) { |
| 538 | ret = pinctrl_utils_add_map_configs(pctldev, map, |
| 539 | reserved_maps, num_maps, group, |
| 540 | configs, num_configs, |
| 541 | PIN_MAP_TYPE_CONFIGS_GROUP); |
| 542 | if (ret < 0) |
| 543 | goto exit; |
| 544 | } |
| 545 | } |
| 546 | |
| 547 | exit: |
| 548 | kfree(configs); |
| 549 | return ret; |
| 550 | } |
| 551 | |
| 552 | static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, |
| 553 | struct device_node *np_config, |
| 554 | struct pinctrl_map **map, |
| 555 | unsigned *num_maps) |
| 556 | { |
| 557 | struct device_node *np; |
| 558 | unsigned reserved_maps; |
| 559 | int ret; |
| 560 | |
| 561 | *map = NULL; |
| 562 | *num_maps = 0; |
| 563 | reserved_maps = 0; |
| 564 | |
| 565 | /* |
| 566 | * If all the pins of a device have the same configuration (or no one), |
| 567 | * it is useless to add a subnode, so directly parse node referenced by |
| 568 | * phandle. |
| 569 | */ |
| 570 | ret = atmel_pctl_dt_subnode_to_map(pctldev, np_config, map, |
| 571 | &reserved_maps, num_maps); |
| 572 | if (ret) { |
| 573 | for_each_child_of_node(np_config, np) { |
| 574 | ret = atmel_pctl_dt_subnode_to_map(pctldev, np, map, |
| 575 | &reserved_maps, num_maps); |
| 576 | if (ret < 0) { |
| 577 | of_node_put(np); |
| 578 | break; |
| 579 | } |
| 580 | } |
| 581 | } |
| 582 | |
| 583 | if (ret < 0) { |
| 584 | pinctrl_utils_free_map(pctldev, *map, *num_maps); |
| 585 | dev_err(pctldev->dev, "can't create maps for node %pOF\n", |
| 586 | np_config); |
| 587 | } |
| 588 | |
| 589 | return ret; |
| 590 | } |
| 591 | |
| 592 | static const struct pinctrl_ops atmel_pctlops = { |
| 593 | .get_groups_count = atmel_pctl_get_groups_count, |
| 594 | .get_group_name = atmel_pctl_get_group_name, |
| 595 | .get_group_pins = atmel_pctl_get_group_pins, |
| 596 | .dt_node_to_map = atmel_pctl_dt_node_to_map, |
| 597 | .dt_free_map = pinctrl_utils_free_map, |
| 598 | }; |
| 599 | |
| 600 | static int atmel_pmx_get_functions_count(struct pinctrl_dev *pctldev) |
| 601 | { |
| 602 | return ARRAY_SIZE(atmel_functions); |
| 603 | } |
| 604 | |
| 605 | static const char *atmel_pmx_get_function_name(struct pinctrl_dev *pctldev, |
| 606 | unsigned selector) |
| 607 | { |
| 608 | return atmel_functions[selector]; |
| 609 | } |
| 610 | |
| 611 | static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev, |
| 612 | unsigned selector, |
| 613 | const char * const **groups, |
| 614 | unsigned * const num_groups) |
| 615 | { |
| 616 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 617 | |
| 618 | *groups = atmel_pioctrl->group_names; |
| 619 | *num_groups = atmel_pioctrl->npins; |
| 620 | |
| 621 | return 0; |
| 622 | } |
| 623 | |
| 624 | static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev, |
| 625 | unsigned function, |
| 626 | unsigned group) |
| 627 | { |
| 628 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 629 | unsigned pin; |
| 630 | u32 conf; |
| 631 | |
| 632 | dev_dbg(pctldev->dev, "enable function %s group %s\n", |
| 633 | atmel_functions[function], atmel_pioctrl->groups[group].name); |
| 634 | |
| 635 | pin = atmel_pioctrl->groups[group].pin; |
| 636 | conf = atmel_pin_config_read(pctldev, pin); |
| 637 | conf &= (~ATMEL_PIO_CFGR_FUNC_MASK); |
| 638 | conf |= (function & ATMEL_PIO_CFGR_FUNC_MASK); |
| 639 | dev_dbg(pctldev->dev, "pin: %u, conf: 0x%08x\n", pin, conf); |
| 640 | atmel_pin_config_write(pctldev, pin, conf); |
| 641 | |
| 642 | return 0; |
| 643 | } |
| 644 | |
| 645 | static const struct pinmux_ops atmel_pmxops = { |
| 646 | .get_functions_count = atmel_pmx_get_functions_count, |
| 647 | .get_function_name = atmel_pmx_get_function_name, |
| 648 | .get_function_groups = atmel_pmx_get_function_groups, |
| 649 | .set_mux = atmel_pmx_set_mux, |
| 650 | }; |
| 651 | |
| 652 | static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev, |
| 653 | unsigned group, |
| 654 | unsigned long *config) |
| 655 | { |
| 656 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 657 | unsigned param = pinconf_to_config_param(*config), arg = 0; |
| 658 | struct atmel_group *grp = atmel_pioctrl->groups + group; |
| 659 | unsigned pin_id = grp->pin; |
| 660 | u32 res; |
| 661 | |
| 662 | res = atmel_pin_config_read(pctldev, pin_id); |
| 663 | |
| 664 | switch (param) { |
| 665 | case PIN_CONFIG_BIAS_PULL_UP: |
| 666 | if (!(res & ATMEL_PIO_PUEN_MASK)) |
| 667 | return -EINVAL; |
| 668 | arg = 1; |
| 669 | break; |
| 670 | case PIN_CONFIG_BIAS_PULL_DOWN: |
| 671 | if ((res & ATMEL_PIO_PUEN_MASK) || |
| 672 | (!(res & ATMEL_PIO_PDEN_MASK))) |
| 673 | return -EINVAL; |
| 674 | arg = 1; |
| 675 | break; |
| 676 | case PIN_CONFIG_BIAS_DISABLE: |
| 677 | if ((res & ATMEL_PIO_PUEN_MASK) || |
| 678 | ((res & ATMEL_PIO_PDEN_MASK))) |
| 679 | return -EINVAL; |
| 680 | arg = 1; |
| 681 | break; |
| 682 | case PIN_CONFIG_DRIVE_OPEN_DRAIN: |
| 683 | if (!(res & ATMEL_PIO_OPD_MASK)) |
| 684 | return -EINVAL; |
| 685 | arg = 1; |
| 686 | break; |
| 687 | case PIN_CONFIG_INPUT_SCHMITT_ENABLE: |
| 688 | if (!(res & ATMEL_PIO_SCHMITT_MASK)) |
| 689 | return -EINVAL; |
| 690 | arg = 1; |
| 691 | break; |
| 692 | case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: |
| 693 | if (!(res & ATMEL_PIO_DRVSTR_MASK)) |
| 694 | return -EINVAL; |
| 695 | arg = (res & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET; |
| 696 | break; |
| 697 | default: |
| 698 | return -ENOTSUPP; |
| 699 | } |
| 700 | |
| 701 | *config = pinconf_to_config_packed(param, arg); |
| 702 | return 0; |
| 703 | } |
| 704 | |
| 705 | static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, |
| 706 | unsigned group, |
| 707 | unsigned long *configs, |
| 708 | unsigned num_configs) |
| 709 | { |
| 710 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 711 | struct atmel_group *grp = atmel_pioctrl->groups + group; |
| 712 | unsigned bank, pin, pin_id = grp->pin; |
| 713 | u32 mask, conf = 0; |
| 714 | int i; |
| 715 | |
| 716 | conf = atmel_pin_config_read(pctldev, pin_id); |
| 717 | |
| 718 | for (i = 0; i < num_configs; i++) { |
| 719 | unsigned param = pinconf_to_config_param(configs[i]); |
| 720 | unsigned arg = pinconf_to_config_argument(configs[i]); |
| 721 | |
| 722 | dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n", |
| 723 | __func__, pin_id, configs[i]); |
| 724 | |
| 725 | switch (param) { |
| 726 | case PIN_CONFIG_BIAS_DISABLE: |
| 727 | conf &= (~ATMEL_PIO_PUEN_MASK); |
| 728 | conf &= (~ATMEL_PIO_PDEN_MASK); |
| 729 | break; |
| 730 | case PIN_CONFIG_BIAS_PULL_UP: |
| 731 | conf |= ATMEL_PIO_PUEN_MASK; |
| 732 | conf &= (~ATMEL_PIO_PDEN_MASK); |
| 733 | break; |
| 734 | case PIN_CONFIG_BIAS_PULL_DOWN: |
| 735 | conf |= ATMEL_PIO_PDEN_MASK; |
| 736 | conf &= (~ATMEL_PIO_PUEN_MASK); |
| 737 | break; |
| 738 | case PIN_CONFIG_DRIVE_OPEN_DRAIN: |
| 739 | if (arg == 0) |
| 740 | conf &= (~ATMEL_PIO_OPD_MASK); |
| 741 | else |
| 742 | conf |= ATMEL_PIO_OPD_MASK; |
| 743 | break; |
| 744 | case PIN_CONFIG_INPUT_SCHMITT_ENABLE: |
| 745 | if (arg == 0) |
| 746 | conf |= ATMEL_PIO_SCHMITT_MASK; |
| 747 | else |
| 748 | conf &= (~ATMEL_PIO_SCHMITT_MASK); |
| 749 | break; |
| 750 | case PIN_CONFIG_INPUT_DEBOUNCE: |
| 751 | if (arg == 0) { |
| 752 | conf &= (~ATMEL_PIO_IFEN_MASK); |
| 753 | conf &= (~ATMEL_PIO_IFSCEN_MASK); |
| 754 | } else { |
| 755 | /* |
| 756 | * We don't care about the debounce value for several reasons: |
| 757 | * - can't have different debounce periods inside a same group, |
| 758 | * - the register to configure this period is a secure register. |
| 759 | * The debouncing filter can filter a pulse with a duration of less |
| 760 | * than 1/2 slow clock period. |
| 761 | */ |
| 762 | conf |= ATMEL_PIO_IFEN_MASK; |
| 763 | conf |= ATMEL_PIO_IFSCEN_MASK; |
| 764 | } |
| 765 | break; |
| 766 | case PIN_CONFIG_OUTPUT: |
| 767 | conf |= ATMEL_PIO_DIR_MASK; |
| 768 | bank = ATMEL_PIO_BANK(pin_id); |
| 769 | pin = ATMEL_PIO_LINE(pin_id); |
| 770 | mask = 1 << pin; |
| 771 | |
| 772 | if (arg == 0) { |
| 773 | writel_relaxed(mask, atmel_pioctrl->reg_base + |
| 774 | bank * ATMEL_PIO_BANK_OFFSET + |
| 775 | ATMEL_PIO_CODR); |
| 776 | } else { |
| 777 | writel_relaxed(mask, atmel_pioctrl->reg_base + |
| 778 | bank * ATMEL_PIO_BANK_OFFSET + |
| 779 | ATMEL_PIO_SODR); |
| 780 | } |
| 781 | break; |
| 782 | case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: |
| 783 | switch (arg) { |
| 784 | case ATMEL_PIO_DRVSTR_LO: |
| 785 | case ATMEL_PIO_DRVSTR_ME: |
| 786 | case ATMEL_PIO_DRVSTR_HI: |
| 787 | conf &= (~ATMEL_PIO_DRVSTR_MASK); |
| 788 | conf |= arg << ATMEL_PIO_DRVSTR_OFFSET; |
| 789 | break; |
| 790 | default: |
| 791 | dev_warn(pctldev->dev, "drive strength not updated (incorrect value)\n"); |
| 792 | } |
| 793 | break; |
| 794 | default: |
| 795 | dev_warn(pctldev->dev, |
| 796 | "unsupported configuration parameter: %u\n", |
| 797 | param); |
| 798 | continue; |
| 799 | } |
| 800 | } |
| 801 | |
| 802 | dev_dbg(pctldev->dev, "%s: reg=0x%08x\n", __func__, conf); |
| 803 | atmel_pin_config_write(pctldev, pin_id, conf); |
| 804 | |
| 805 | return 0; |
| 806 | } |
| 807 | |
| 808 | static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev, |
| 809 | struct seq_file *s, unsigned pin_id) |
| 810 | { |
| 811 | struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); |
| 812 | u32 conf; |
| 813 | |
| 814 | if (!atmel_pioctrl->pins[pin_id]->device) |
| 815 | return; |
| 816 | |
| 817 | if (atmel_pioctrl->pins[pin_id]) |
| 818 | seq_printf(s, " (%s, ioset %u) ", |
| 819 | atmel_pioctrl->pins[pin_id]->device, |
| 820 | atmel_pioctrl->pins[pin_id]->ioset); |
| 821 | |
| 822 | conf = atmel_pin_config_read(pctldev, pin_id); |
| 823 | if (conf & ATMEL_PIO_PUEN_MASK) |
| 824 | seq_printf(s, "%s ", "pull-up"); |
| 825 | if (conf & ATMEL_PIO_PDEN_MASK) |
| 826 | seq_printf(s, "%s ", "pull-down"); |
| 827 | if (conf & ATMEL_PIO_IFEN_MASK) |
| 828 | seq_printf(s, "%s ", "debounce"); |
| 829 | if (conf & ATMEL_PIO_OPD_MASK) |
| 830 | seq_printf(s, "%s ", "open-drain"); |
| 831 | if (conf & ATMEL_PIO_SCHMITT_MASK) |
| 832 | seq_printf(s, "%s ", "schmitt"); |
| 833 | if (conf & ATMEL_PIO_DRVSTR_MASK) { |
| 834 | switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) { |
| 835 | case ATMEL_PIO_DRVSTR_ME: |
| 836 | seq_printf(s, "%s ", "medium-drive"); |
| 837 | break; |
| 838 | case ATMEL_PIO_DRVSTR_HI: |
| 839 | seq_printf(s, "%s ", "high-drive"); |
| 840 | break; |
| 841 | /* ATMEL_PIO_DRVSTR_LO and 0 which is the default value at reset */ |
| 842 | default: |
| 843 | seq_printf(s, "%s ", "low-drive"); |
| 844 | } |
| 845 | } |
| 846 | } |
| 847 | |
| 848 | static const struct pinconf_ops atmel_confops = { |
| 849 | .pin_config_group_get = atmel_conf_pin_config_group_get, |
| 850 | .pin_config_group_set = atmel_conf_pin_config_group_set, |
| 851 | .pin_config_dbg_show = atmel_conf_pin_config_dbg_show, |
| 852 | }; |
| 853 | |
| 854 | static struct pinctrl_desc atmel_pinctrl_desc = { |
| 855 | .name = "atmel_pinctrl", |
| 856 | .confops = &atmel_confops, |
| 857 | .pctlops = &atmel_pctlops, |
| 858 | .pmxops = &atmel_pmxops, |
| 859 | }; |
| 860 | |
| 861 | static int __maybe_unused atmel_pctrl_suspend(struct device *dev) |
| 862 | { |
| 863 | struct atmel_pioctrl *atmel_pioctrl = dev_get_drvdata(dev); |
| 864 | int i, j; |
| 865 | |
| 866 | /* |
| 867 | * For each bank, save IMR to restore it later and disable all GPIO |
| 868 | * interrupts excepting the ones marked as wakeup sources. |
| 869 | */ |
| 870 | for (i = 0; i < atmel_pioctrl->nbanks; i++) { |
| 871 | atmel_pioctrl->pm_suspend_backup[i].imr = |
| 872 | atmel_gpio_read(atmel_pioctrl, i, ATMEL_PIO_IMR); |
| 873 | atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_IDR, |
| 874 | ~atmel_pioctrl->pm_wakeup_sources[i]); |
| 875 | atmel_pioctrl->pm_suspend_backup[i].odsr = |
| 876 | atmel_gpio_read(atmel_pioctrl, i, ATMEL_PIO_ODSR); |
| 877 | for (j = 0; j < ATMEL_PIO_NPINS_PER_BANK; j++) { |
| 878 | atmel_gpio_write(atmel_pioctrl, i, |
| 879 | ATMEL_PIO_MSKR, BIT(j)); |
| 880 | atmel_pioctrl->pm_suspend_backup[i].cfgr[j] = |
| 881 | atmel_gpio_read(atmel_pioctrl, i, |
| 882 | ATMEL_PIO_CFGR); |
| 883 | } |
| 884 | } |
| 885 | |
| 886 | return 0; |
| 887 | } |
| 888 | |
| 889 | static int __maybe_unused atmel_pctrl_resume(struct device *dev) |
| 890 | { |
| 891 | struct atmel_pioctrl *atmel_pioctrl = dev_get_drvdata(dev); |
| 892 | int i, j; |
| 893 | |
| 894 | for (i = 0; i < atmel_pioctrl->nbanks; i++) { |
| 895 | atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_IER, |
| 896 | atmel_pioctrl->pm_suspend_backup[i].imr); |
| 897 | atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_SODR, |
| 898 | atmel_pioctrl->pm_suspend_backup[i].odsr); |
| 899 | for (j = 0; j < ATMEL_PIO_NPINS_PER_BANK; j++) { |
| 900 | atmel_gpio_write(atmel_pioctrl, i, |
| 901 | ATMEL_PIO_MSKR, BIT(j)); |
| 902 | atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_CFGR, |
| 903 | atmel_pioctrl->pm_suspend_backup[i].cfgr[j]); |
| 904 | } |
| 905 | } |
| 906 | |
| 907 | return 0; |
| 908 | } |
| 909 | |
| 910 | static const struct dev_pm_ops atmel_pctrl_pm_ops = { |
| 911 | SET_SYSTEM_SLEEP_PM_OPS(atmel_pctrl_suspend, atmel_pctrl_resume) |
| 912 | }; |
| 913 | |
| 914 | /* |
| 915 | * The number of banks can be different from a SoC to another one. |
| 916 | * We can have up to 16 banks. |
| 917 | */ |
| 918 | static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = { |
| 919 | .nbanks = 4, |
| 920 | }; |
| 921 | |
| 922 | static const struct of_device_id atmel_pctrl_of_match[] = { |
| 923 | { |
| 924 | .compatible = "atmel,sama5d2-pinctrl", |
| 925 | .data = &atmel_sama5d2_pioctrl_data, |
| 926 | }, { |
| 927 | /* sentinel */ |
| 928 | } |
| 929 | }; |
| 930 | |
| 931 | /* |
| 932 | * This lock class allows to tell lockdep that parent IRQ and children IRQ do |
| 933 | * not share the same class so it does not raise false positive |
| 934 | */ |
| 935 | static struct lock_class_key atmel_lock_key; |
| 936 | static struct lock_class_key atmel_request_key; |
| 937 | |
| 938 | static int atmel_pinctrl_probe(struct platform_device *pdev) |
| 939 | { |
| 940 | struct device *dev = &pdev->dev; |
| 941 | struct pinctrl_pin_desc *pin_desc; |
| 942 | const char **group_names; |
| 943 | const struct of_device_id *match; |
| 944 | int i, ret; |
| 945 | struct resource *res; |
| 946 | struct atmel_pioctrl *atmel_pioctrl; |
| 947 | const struct atmel_pioctrl_data *atmel_pioctrl_data; |
| 948 | |
| 949 | atmel_pioctrl = devm_kzalloc(dev, sizeof(*atmel_pioctrl), GFP_KERNEL); |
| 950 | if (!atmel_pioctrl) |
| 951 | return -ENOMEM; |
| 952 | atmel_pioctrl->dev = dev; |
| 953 | atmel_pioctrl->node = dev->of_node; |
| 954 | platform_set_drvdata(pdev, atmel_pioctrl); |
| 955 | |
| 956 | match = of_match_node(atmel_pctrl_of_match, dev->of_node); |
| 957 | if (!match) { |
| 958 | dev_err(dev, "unknown compatible string\n"); |
| 959 | return -ENODEV; |
| 960 | } |
| 961 | atmel_pioctrl_data = match->data; |
| 962 | atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks; |
| 963 | atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK; |
| 964 | |
| 965 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 966 | atmel_pioctrl->reg_base = devm_ioremap_resource(dev, res); |
| 967 | if (IS_ERR(atmel_pioctrl->reg_base)) |
| 968 | return -EINVAL; |
| 969 | |
| 970 | atmel_pioctrl->clk = devm_clk_get(dev, NULL); |
| 971 | if (IS_ERR(atmel_pioctrl->clk)) { |
| 972 | dev_err(dev, "failed to get clock\n"); |
| 973 | return PTR_ERR(atmel_pioctrl->clk); |
| 974 | } |
| 975 | |
| 976 | atmel_pioctrl->pins = devm_kcalloc(dev, |
| 977 | atmel_pioctrl->npins, |
| 978 | sizeof(*atmel_pioctrl->pins), |
| 979 | GFP_KERNEL); |
| 980 | if (!atmel_pioctrl->pins) |
| 981 | return -ENOMEM; |
| 982 | |
| 983 | pin_desc = devm_kcalloc(dev, atmel_pioctrl->npins, sizeof(*pin_desc), |
| 984 | GFP_KERNEL); |
| 985 | if (!pin_desc) |
| 986 | return -ENOMEM; |
| 987 | atmel_pinctrl_desc.pins = pin_desc; |
| 988 | atmel_pinctrl_desc.npins = atmel_pioctrl->npins; |
| 989 | atmel_pinctrl_desc.num_custom_params = ARRAY_SIZE(atmel_custom_bindings); |
| 990 | atmel_pinctrl_desc.custom_params = atmel_custom_bindings; |
| 991 | |
| 992 | /* One pin is one group since a pin can achieve all functions. */ |
| 993 | group_names = devm_kcalloc(dev, |
| 994 | atmel_pioctrl->npins, sizeof(*group_names), |
| 995 | GFP_KERNEL); |
| 996 | if (!group_names) |
| 997 | return -ENOMEM; |
| 998 | atmel_pioctrl->group_names = group_names; |
| 999 | |
| 1000 | atmel_pioctrl->groups = devm_kcalloc(&pdev->dev, |
| 1001 | atmel_pioctrl->npins, sizeof(*atmel_pioctrl->groups), |
| 1002 | GFP_KERNEL); |
| 1003 | if (!atmel_pioctrl->groups) |
| 1004 | return -ENOMEM; |
| 1005 | for (i = 0 ; i < atmel_pioctrl->npins; i++) { |
| 1006 | struct atmel_group *group = atmel_pioctrl->groups + i; |
| 1007 | unsigned bank = ATMEL_PIO_BANK(i); |
| 1008 | unsigned line = ATMEL_PIO_LINE(i); |
| 1009 | |
| 1010 | atmel_pioctrl->pins[i] = devm_kzalloc(dev, |
| 1011 | sizeof(**atmel_pioctrl->pins), GFP_KERNEL); |
| 1012 | if (!atmel_pioctrl->pins[i]) |
| 1013 | return -ENOMEM; |
| 1014 | |
| 1015 | atmel_pioctrl->pins[i]->pin_id = i; |
| 1016 | atmel_pioctrl->pins[i]->bank = bank; |
| 1017 | atmel_pioctrl->pins[i]->line = line; |
| 1018 | |
| 1019 | pin_desc[i].number = i; |
| 1020 | /* Pin naming convention: P(bank_name)(bank_pin_number). */ |
| 1021 | pin_desc[i].name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "P%c%d", |
| 1022 | bank + 'A', line); |
| 1023 | if (!pin_desc[i].name) |
| 1024 | return -ENOMEM; |
| 1025 | |
| 1026 | group->name = group_names[i] = pin_desc[i].name; |
| 1027 | group->pin = pin_desc[i].number; |
| 1028 | |
| 1029 | dev_dbg(dev, "pin_id=%u, bank=%u, line=%u", i, bank, line); |
| 1030 | } |
| 1031 | |
| 1032 | atmel_pioctrl->gpio_chip = &atmel_gpio_chip; |
| 1033 | atmel_pioctrl->gpio_chip->of_node = dev->of_node; |
| 1034 | atmel_pioctrl->gpio_chip->ngpio = atmel_pioctrl->npins; |
| 1035 | atmel_pioctrl->gpio_chip->label = dev_name(dev); |
| 1036 | atmel_pioctrl->gpio_chip->parent = dev; |
| 1037 | atmel_pioctrl->gpio_chip->names = atmel_pioctrl->group_names; |
| 1038 | |
| 1039 | atmel_pioctrl->pm_wakeup_sources = devm_kcalloc(dev, |
| 1040 | atmel_pioctrl->nbanks, |
| 1041 | sizeof(*atmel_pioctrl->pm_wakeup_sources), |
| 1042 | GFP_KERNEL); |
| 1043 | if (!atmel_pioctrl->pm_wakeup_sources) |
| 1044 | return -ENOMEM; |
| 1045 | |
| 1046 | atmel_pioctrl->pm_suspend_backup = devm_kcalloc(dev, |
| 1047 | atmel_pioctrl->nbanks, |
| 1048 | sizeof(*atmel_pioctrl->pm_suspend_backup), |
| 1049 | GFP_KERNEL); |
| 1050 | if (!atmel_pioctrl->pm_suspend_backup) |
| 1051 | return -ENOMEM; |
| 1052 | |
| 1053 | atmel_pioctrl->irqs = devm_kcalloc(dev, |
| 1054 | atmel_pioctrl->nbanks, |
| 1055 | sizeof(*atmel_pioctrl->irqs), |
| 1056 | GFP_KERNEL); |
| 1057 | if (!atmel_pioctrl->irqs) |
| 1058 | return -ENOMEM; |
| 1059 | |
| 1060 | /* There is one controller but each bank has its own irq line. */ |
| 1061 | for (i = 0; i < atmel_pioctrl->nbanks; i++) { |
| 1062 | res = platform_get_resource(pdev, IORESOURCE_IRQ, i); |
| 1063 | if (!res) { |
| 1064 | dev_err(dev, "missing irq resource for group %c\n", |
| 1065 | 'A' + i); |
| 1066 | return -EINVAL; |
| 1067 | } |
| 1068 | atmel_pioctrl->irqs[i] = res->start; |
| 1069 | irq_set_chained_handler(res->start, atmel_gpio_irq_handler); |
| 1070 | irq_set_handler_data(res->start, atmel_pioctrl); |
| 1071 | dev_dbg(dev, "bank %i: irq=%pr\n", i, res); |
| 1072 | } |
| 1073 | |
| 1074 | atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node, |
| 1075 | atmel_pioctrl->gpio_chip->ngpio, |
| 1076 | &irq_domain_simple_ops, NULL); |
| 1077 | if (!atmel_pioctrl->irq_domain) { |
| 1078 | dev_err(dev, "can't add the irq domain\n"); |
| 1079 | return -ENODEV; |
| 1080 | } |
| 1081 | |
| 1082 | for (i = 0; i < atmel_pioctrl->npins; i++) { |
| 1083 | int irq = irq_create_mapping(atmel_pioctrl->irq_domain, i); |
| 1084 | |
| 1085 | irq_set_chip_and_handler(irq, &atmel_gpio_irq_chip, |
| 1086 | handle_simple_irq); |
| 1087 | irq_set_chip_data(irq, atmel_pioctrl); |
| 1088 | irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key); |
| 1089 | dev_dbg(dev, |
| 1090 | "atmel gpio irq domain: hwirq: %d, linux irq: %d\n", |
| 1091 | i, irq); |
| 1092 | } |
| 1093 | |
| 1094 | ret = clk_prepare_enable(atmel_pioctrl->clk); |
| 1095 | if (ret) { |
| 1096 | dev_err(dev, "failed to prepare and enable clock\n"); |
| 1097 | goto clk_prepare_enable_error; |
| 1098 | } |
| 1099 | |
| 1100 | atmel_pioctrl->pinctrl_dev = devm_pinctrl_register(&pdev->dev, |
| 1101 | &atmel_pinctrl_desc, |
| 1102 | atmel_pioctrl); |
| 1103 | if (IS_ERR(atmel_pioctrl->pinctrl_dev)) { |
| 1104 | ret = PTR_ERR(atmel_pioctrl->pinctrl_dev); |
| 1105 | dev_err(dev, "pinctrl registration failed\n"); |
| 1106 | goto clk_unprep; |
| 1107 | } |
| 1108 | |
| 1109 | ret = gpiochip_add_data(atmel_pioctrl->gpio_chip, atmel_pioctrl); |
| 1110 | if (ret) { |
| 1111 | dev_err(dev, "failed to add gpiochip\n"); |
| 1112 | goto clk_unprep; |
| 1113 | } |
| 1114 | |
| 1115 | ret = gpiochip_add_pin_range(atmel_pioctrl->gpio_chip, dev_name(dev), |
| 1116 | 0, 0, atmel_pioctrl->gpio_chip->ngpio); |
| 1117 | if (ret) { |
| 1118 | dev_err(dev, "failed to add gpio pin range\n"); |
| 1119 | goto gpiochip_add_pin_range_error; |
| 1120 | } |
| 1121 | |
| 1122 | dev_info(&pdev->dev, "atmel pinctrl initialized\n"); |
| 1123 | |
| 1124 | return 0; |
| 1125 | |
| 1126 | gpiochip_add_pin_range_error: |
| 1127 | gpiochip_remove(atmel_pioctrl->gpio_chip); |
| 1128 | |
| 1129 | clk_unprep: |
| 1130 | clk_disable_unprepare(atmel_pioctrl->clk); |
| 1131 | |
| 1132 | clk_prepare_enable_error: |
| 1133 | irq_domain_remove(atmel_pioctrl->irq_domain); |
| 1134 | |
| 1135 | return ret; |
| 1136 | } |
| 1137 | |
| 1138 | static struct platform_driver atmel_pinctrl_driver = { |
| 1139 | .driver = { |
| 1140 | .name = "pinctrl-at91-pio4", |
| 1141 | .of_match_table = atmel_pctrl_of_match, |
| 1142 | .pm = &atmel_pctrl_pm_ops, |
| 1143 | .suppress_bind_attrs = true, |
| 1144 | }, |
| 1145 | .probe = atmel_pinctrl_probe, |
| 1146 | }; |
| 1147 | builtin_platform_driver(atmel_pinctrl_driver); |