b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver |
| 4 | * |
| 5 | * Copyright (C) Nokia Corporation |
| 6 | * |
| 7 | * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> |
| 8 | */ |
| 9 | |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/errno.h> |
| 12 | #include <linux/device.h> |
| 13 | #include <linux/i2c.h> |
| 14 | #include <linux/gpio.h> |
| 15 | #include <linux/regulator/consumer.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <sound/tpa6130a2-plat.h> |
| 18 | #include <sound/soc.h> |
| 19 | #include <sound/tlv.h> |
| 20 | #include <linux/of.h> |
| 21 | #include <linux/of_gpio.h> |
| 22 | #include <linux/regmap.h> |
| 23 | |
| 24 | #include "tpa6130a2.h" |
| 25 | |
| 26 | enum tpa_model { |
| 27 | TPA6130A2, |
| 28 | TPA6140A2, |
| 29 | }; |
| 30 | |
| 31 | /* This struct is used to save the context */ |
| 32 | struct tpa6130a2_data { |
| 33 | struct device *dev; |
| 34 | struct regmap *regmap; |
| 35 | struct regulator *supply; |
| 36 | int power_gpio; |
| 37 | enum tpa_model id; |
| 38 | }; |
| 39 | |
| 40 | static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable) |
| 41 | { |
| 42 | int ret = 0, ret2; |
| 43 | |
| 44 | if (enable) { |
| 45 | ret = regulator_enable(data->supply); |
| 46 | if (ret != 0) { |
| 47 | dev_err(data->dev, |
| 48 | "Failed to enable supply: %d\n", ret); |
| 49 | return ret; |
| 50 | } |
| 51 | /* Power on */ |
| 52 | if (data->power_gpio >= 0) |
| 53 | gpio_set_value(data->power_gpio, 1); |
| 54 | |
| 55 | /* Sync registers */ |
| 56 | regcache_cache_only(data->regmap, false); |
| 57 | ret = regcache_sync(data->regmap); |
| 58 | if (ret != 0) { |
| 59 | dev_err(data->dev, |
| 60 | "Failed to sync registers: %d\n", ret); |
| 61 | regcache_cache_only(data->regmap, true); |
| 62 | if (data->power_gpio >= 0) |
| 63 | gpio_set_value(data->power_gpio, 0); |
| 64 | ret2 = regulator_disable(data->supply); |
| 65 | if (ret2 != 0) |
| 66 | dev_err(data->dev, |
| 67 | "Failed to disable supply: %d\n", ret2); |
| 68 | return ret; |
| 69 | } |
| 70 | } else { |
| 71 | /* Powered off device does not retain registers. While device |
| 72 | * is off, any register updates (i.e. volume changes) should |
| 73 | * happen in cache only. |
| 74 | */ |
| 75 | regcache_mark_dirty(data->regmap); |
| 76 | regcache_cache_only(data->regmap, true); |
| 77 | |
| 78 | /* Power off */ |
| 79 | if (data->power_gpio >= 0) |
| 80 | gpio_set_value(data->power_gpio, 0); |
| 81 | |
| 82 | ret = regulator_disable(data->supply); |
| 83 | if (ret != 0) { |
| 84 | dev_err(data->dev, |
| 85 | "Failed to disable supply: %d\n", ret); |
| 86 | return ret; |
| 87 | } |
| 88 | } |
| 89 | |
| 90 | return ret; |
| 91 | } |
| 92 | |
| 93 | static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w, |
| 94 | struct snd_kcontrol *kctrl, int event) |
| 95 | { |
| 96 | struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); |
| 97 | struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c); |
| 98 | |
| 99 | if (SND_SOC_DAPM_EVENT_ON(event)) { |
| 100 | /* Before widget power up: turn chip on, sync registers */ |
| 101 | return tpa6130a2_power(data, true); |
| 102 | } else { |
| 103 | /* After widget power down: turn chip off */ |
| 104 | return tpa6130a2_power(data, false); |
| 105 | } |
| 106 | } |
| 107 | |
| 108 | /* |
| 109 | * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going |
| 110 | * down in gain. |
| 111 | */ |
| 112 | static const DECLARE_TLV_DB_RANGE(tpa6130_tlv, |
| 113 | 0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0), |
| 114 | 2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0), |
| 115 | 4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0), |
| 116 | 6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0), |
| 117 | 8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0), |
| 118 | 10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0), |
| 119 | 12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0), |
| 120 | 14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0), |
| 121 | 21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0), |
| 122 | 38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0) |
| 123 | ); |
| 124 | |
| 125 | static const struct snd_kcontrol_new tpa6130a2_controls[] = { |
| 126 | SOC_SINGLE_TLV("Headphone Playback Volume", |
| 127 | TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0, |
| 128 | tpa6130_tlv), |
| 129 | }; |
| 130 | |
| 131 | static const DECLARE_TLV_DB_RANGE(tpa6140_tlv, |
| 132 | 0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0), |
| 133 | 9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0), |
| 134 | 17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0) |
| 135 | ); |
| 136 | |
| 137 | static const struct snd_kcontrol_new tpa6140a2_controls[] = { |
| 138 | SOC_SINGLE_TLV("Headphone Playback Volume", |
| 139 | TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0, |
| 140 | tpa6140_tlv), |
| 141 | }; |
| 142 | |
| 143 | static int tpa6130a2_component_probe(struct snd_soc_component *component) |
| 144 | { |
| 145 | struct tpa6130a2_data *data = snd_soc_component_get_drvdata(component); |
| 146 | |
| 147 | if (data->id == TPA6140A2) |
| 148 | return snd_soc_add_component_controls(component, |
| 149 | tpa6140a2_controls, ARRAY_SIZE(tpa6140a2_controls)); |
| 150 | else |
| 151 | return snd_soc_add_component_controls(component, |
| 152 | tpa6130a2_controls, ARRAY_SIZE(tpa6130a2_controls)); |
| 153 | } |
| 154 | |
| 155 | static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = { |
| 156 | SND_SOC_DAPM_INPUT("LEFTIN"), |
| 157 | SND_SOC_DAPM_INPUT("RIGHTIN"), |
| 158 | SND_SOC_DAPM_OUTPUT("HPLEFT"), |
| 159 | SND_SOC_DAPM_OUTPUT("HPRIGHT"), |
| 160 | |
| 161 | SND_SOC_DAPM_PGA("Left Mute", TPA6130A2_REG_VOL_MUTE, |
| 162 | TPA6130A2_HP_EN_L_SHIFT, 1, NULL, 0), |
| 163 | SND_SOC_DAPM_PGA("Right Mute", TPA6130A2_REG_VOL_MUTE, |
| 164 | TPA6130A2_HP_EN_R_SHIFT, 1, NULL, 0), |
| 165 | SND_SOC_DAPM_PGA("Left PGA", TPA6130A2_REG_CONTROL, |
| 166 | TPA6130A2_HP_EN_L_SHIFT, 0, NULL, 0), |
| 167 | SND_SOC_DAPM_PGA("Right PGA", TPA6130A2_REG_CONTROL, |
| 168 | TPA6130A2_HP_EN_R_SHIFT, 0, NULL, 0), |
| 169 | |
| 170 | SND_SOC_DAPM_SUPPLY("Power", TPA6130A2_REG_CONTROL, |
| 171 | TPA6130A2_SWS_SHIFT, 1, tpa6130a2_power_event, |
| 172 | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), |
| 173 | }; |
| 174 | |
| 175 | static const struct snd_soc_dapm_route tpa6130a2_dapm_routes[] = { |
| 176 | { "Left PGA", NULL, "LEFTIN" }, |
| 177 | { "Right PGA", NULL, "RIGHTIN" }, |
| 178 | |
| 179 | { "Left Mute", NULL, "Left PGA" }, |
| 180 | { "Right Mute", NULL, "Right PGA" }, |
| 181 | |
| 182 | { "HPLEFT", NULL, "Left Mute" }, |
| 183 | { "HPRIGHT", NULL, "Right Mute" }, |
| 184 | |
| 185 | { "Left PGA", NULL, "Power" }, |
| 186 | { "Right PGA", NULL, "Power" }, |
| 187 | }; |
| 188 | |
| 189 | static const struct snd_soc_component_driver tpa6130a2_component_driver = { |
| 190 | .name = "tpa6130a2", |
| 191 | .probe = tpa6130a2_component_probe, |
| 192 | .dapm_widgets = tpa6130a2_dapm_widgets, |
| 193 | .num_dapm_widgets = ARRAY_SIZE(tpa6130a2_dapm_widgets), |
| 194 | .dapm_routes = tpa6130a2_dapm_routes, |
| 195 | .num_dapm_routes = ARRAY_SIZE(tpa6130a2_dapm_routes), |
| 196 | }; |
| 197 | |
| 198 | static const struct reg_default tpa6130a2_reg_defaults[] = { |
| 199 | { TPA6130A2_REG_CONTROL, TPA6130A2_SWS }, |
| 200 | { TPA6130A2_REG_VOL_MUTE, TPA6130A2_MUTE_R | TPA6130A2_MUTE_L }, |
| 201 | }; |
| 202 | |
| 203 | static const struct regmap_config tpa6130a2_regmap_config = { |
| 204 | .reg_bits = 8, |
| 205 | .val_bits = 8, |
| 206 | .max_register = TPA6130A2_REG_VERSION, |
| 207 | .reg_defaults = tpa6130a2_reg_defaults, |
| 208 | .num_reg_defaults = ARRAY_SIZE(tpa6130a2_reg_defaults), |
| 209 | .cache_type = REGCACHE_RBTREE, |
| 210 | }; |
| 211 | |
| 212 | static int tpa6130a2_probe(struct i2c_client *client, |
| 213 | const struct i2c_device_id *id) |
| 214 | { |
| 215 | struct device *dev; |
| 216 | struct tpa6130a2_data *data; |
| 217 | struct tpa6130a2_platform_data *pdata = client->dev.platform_data; |
| 218 | struct device_node *np = client->dev.of_node; |
| 219 | const char *regulator; |
| 220 | unsigned int version; |
| 221 | int ret; |
| 222 | |
| 223 | dev = &client->dev; |
| 224 | |
| 225 | data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); |
| 226 | if (!data) |
| 227 | return -ENOMEM; |
| 228 | |
| 229 | data->dev = dev; |
| 230 | |
| 231 | data->regmap = devm_regmap_init_i2c(client, &tpa6130a2_regmap_config); |
| 232 | if (IS_ERR(data->regmap)) |
| 233 | return PTR_ERR(data->regmap); |
| 234 | |
| 235 | if (pdata) { |
| 236 | data->power_gpio = pdata->power_gpio; |
| 237 | } else if (np) { |
| 238 | data->power_gpio = of_get_named_gpio(np, "power-gpio", 0); |
| 239 | } else { |
| 240 | dev_err(dev, "Platform data not set\n"); |
| 241 | dump_stack(); |
| 242 | return -ENODEV; |
| 243 | } |
| 244 | |
| 245 | i2c_set_clientdata(client, data); |
| 246 | |
| 247 | data->id = id->driver_data; |
| 248 | |
| 249 | if (data->power_gpio >= 0) { |
| 250 | ret = devm_gpio_request(dev, data->power_gpio, |
| 251 | "tpa6130a2 enable"); |
| 252 | if (ret < 0) { |
| 253 | dev_err(dev, "Failed to request power GPIO (%d)\n", |
| 254 | data->power_gpio); |
| 255 | return ret; |
| 256 | } |
| 257 | gpio_direction_output(data->power_gpio, 0); |
| 258 | } |
| 259 | |
| 260 | switch (data->id) { |
| 261 | default: |
| 262 | dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n", |
| 263 | data->id); |
| 264 | /* fall through */ |
| 265 | case TPA6130A2: |
| 266 | regulator = "Vdd"; |
| 267 | break; |
| 268 | case TPA6140A2: |
| 269 | regulator = "AVdd"; |
| 270 | break; |
| 271 | } |
| 272 | |
| 273 | data->supply = devm_regulator_get(dev, regulator); |
| 274 | if (IS_ERR(data->supply)) { |
| 275 | ret = PTR_ERR(data->supply); |
| 276 | dev_err(dev, "Failed to request supply: %d\n", ret); |
| 277 | return ret; |
| 278 | } |
| 279 | |
| 280 | ret = tpa6130a2_power(data, true); |
| 281 | if (ret != 0) |
| 282 | return ret; |
| 283 | |
| 284 | |
| 285 | /* Read version */ |
| 286 | regmap_read(data->regmap, TPA6130A2_REG_VERSION, &version); |
| 287 | version &= TPA6130A2_VERSION_MASK; |
| 288 | if ((version != 1) && (version != 2)) |
| 289 | dev_warn(dev, "UNTESTED version detected (%d)\n", version); |
| 290 | |
| 291 | /* Disable the chip */ |
| 292 | ret = tpa6130a2_power(data, false); |
| 293 | if (ret != 0) |
| 294 | return ret; |
| 295 | |
| 296 | return devm_snd_soc_register_component(&client->dev, |
| 297 | &tpa6130a2_component_driver, NULL, 0); |
| 298 | } |
| 299 | |
| 300 | static const struct i2c_device_id tpa6130a2_id[] = { |
| 301 | { "tpa6130a2", TPA6130A2 }, |
| 302 | { "tpa6140a2", TPA6140A2 }, |
| 303 | { } |
| 304 | }; |
| 305 | MODULE_DEVICE_TABLE(i2c, tpa6130a2_id); |
| 306 | |
| 307 | #if IS_ENABLED(CONFIG_OF) |
| 308 | static const struct of_device_id tpa6130a2_of_match[] = { |
| 309 | { .compatible = "ti,tpa6130a2", }, |
| 310 | { .compatible = "ti,tpa6140a2" }, |
| 311 | {}, |
| 312 | }; |
| 313 | MODULE_DEVICE_TABLE(of, tpa6130a2_of_match); |
| 314 | #endif |
| 315 | |
| 316 | static struct i2c_driver tpa6130a2_i2c_driver = { |
| 317 | .driver = { |
| 318 | .name = "tpa6130a2", |
| 319 | .of_match_table = of_match_ptr(tpa6130a2_of_match), |
| 320 | }, |
| 321 | .probe = tpa6130a2_probe, |
| 322 | .id_table = tpa6130a2_id, |
| 323 | }; |
| 324 | |
| 325 | module_i2c_driver(tpa6130a2_i2c_driver); |
| 326 | |
| 327 | MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); |
| 328 | MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver"); |
| 329 | MODULE_LICENSE("GPL"); |