| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 |
| 2 | From: Jonas Gorski <jogo@openwrt.org> |
| 3 | Date: Sun, 9 Mar 2014 04:55:52 +0100 |
| 4 | Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support |
| 5 | |
| 6 | --- |
| 7 | arch/mips/bcm63xx/boards/Kconfig | 6 + |
| 8 | arch/mips/bcm63xx/boards/Makefile | 1 + |
| 9 | arch/mips/bcm63xx/boards/board_common.c | 2 +- |
| 10 | arch/mips/bcm63xx/boards/board_common.h | 6 + |
| 11 | arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ |
| 12 | 5 files changed, 229 insertions(+), 1 deletion(-) |
| 13 | create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c |
| 14 | |
| 15 | --- a/arch/mips/bcm63xx/boards/Kconfig |
| 16 | +++ b/arch/mips/bcm63xx/boards/Kconfig |
| 17 | @@ -12,4 +12,10 @@ config BOARD_BCM963XX |
| 18 | select BCMA |
| 19 | default y |
| 20 | |
| 21 | +config BOARD_LIVEBOX |
| 22 | + bool "Inventel Livebox(es) boards" |
| 23 | + select SSB |
| 24 | + help |
| 25 | + Inventel Livebox boards using the RedBoot bootloader. |
| 26 | + |
| 27 | endmenu |
| 28 | --- a/arch/mips/bcm63xx/boards/Makefile |
| 29 | +++ b/arch/mips/bcm63xx/boards/Makefile |
| 30 | @@ -1,3 +1,4 @@ |
| 31 | # SPDX-License-Identifier: GPL-2.0-only |
| 32 | obj-y += board_common.o |
| 33 | obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o |
| 34 | +obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o |
| 35 | --- a/arch/mips/bcm63xx/boards/board_common.c |
| 36 | +++ b/arch/mips/bcm63xx/boards/board_common.c |
| 37 | @@ -54,7 +54,7 @@ void __init board_prom_init(void) |
| 38 | if (fw_arg3 == CFE_EPTSEAL) |
| 39 | board_bcm963xx_init(); |
| 40 | else |
| 41 | - panic("unsupported bootloader detected"); |
| 42 | + board_livebox_init(); |
| 43 | } |
| 44 | |
| 45 | static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); |
| 46 | --- a/arch/mips/bcm63xx/boards/board_common.h |
| 47 | +++ b/arch/mips/bcm63xx/boards/board_common.h |
| 48 | @@ -24,4 +24,10 @@ static inline void board_of_device_prese |
| 49 | } |
| 50 | #endif |
| 51 | |
| 52 | +#if defined(CONFIG_BOARD_LIVEBOX) |
| 53 | +void board_livebox_init(void); |
| 54 | +#else |
| 55 | +static inline void board_livebox_init(void) { } |
| 56 | +#endif |
| 57 | + |
| 58 | #endif /* __BOARD_COMMON_H */ |
| 59 | --- /dev/null |
| 60 | +++ b/arch/mips/bcm63xx/boards/board_livebox.c |
| 61 | @@ -0,0 +1,153 @@ |
| 62 | +/* |
| 63 | + * This file is subject to the terms and conditions of the GNU General Public |
| 64 | + * License. See the file "COPYING" in the main directory of this archive |
| 65 | + * for more details. |
| 66 | + * |
| 67 | + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> |
| 68 | + */ |
| 69 | + |
| 70 | +#include <linux/init.h> |
| 71 | +#include <linux/kernel.h> |
| 72 | +#include <linux/string.h> |
| 73 | +#include <linux/input.h> |
| 74 | +#include <asm/addrspace.h> |
| 75 | +#include <bcm63xx_board.h> |
| 76 | +#include <bcm63xx_cpu.h> |
| 77 | +#include <bcm63xx_regs.h> |
| 78 | +#include <bcm63xx_io.h> |
| 79 | +#include <bcm63xx_dev_flash.h> |
| 80 | +#include <board_bcm963xx.h> |
| 81 | + |
| 82 | +#include "board_common.h" |
| 83 | + |
| 84 | +#define PFX "board_livebox: " |
| 85 | + |
| 86 | +static unsigned int mac_addr_used = 0; |
| 87 | + |
| 88 | +/* |
| 89 | + * known 6348 boards |
| 90 | + */ |
| 91 | +#ifdef CONFIG_BCM63XX_CPU_6348 |
| 92 | +static struct board_info __initdata board_livebox_blue5g = { |
| 93 | + .name = "Livebox-blue-5g", |
| 94 | + .expected_cpu_id = 0x6348, |
| 95 | + |
| 96 | + .has_pccard = 1, |
| 97 | + .has_pci = 1, |
| 98 | + .has_ohci0 = 1, |
| 99 | + .ephy_reset_gpio = 6, |
| 100 | + .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, |
| 101 | + |
| 102 | + .has_enet0 = 1, |
| 103 | + .enet0 = { |
| 104 | + .has_phy = 1, |
| 105 | + .use_internal_phy = 1, |
| 106 | + }, |
| 107 | + |
| 108 | + .has_enet1 = 1, |
| 109 | + .enet1 = { |
| 110 | + .has_phy = 1, |
| 111 | + .phy_id = 31, |
| 112 | + }, |
| 113 | +}; |
| 114 | +#endif |
| 115 | + |
| 116 | +/* |
| 117 | + * all boards |
| 118 | + */ |
| 119 | +static const struct board_info __initdata *bcm963xx_boards[] = { |
| 120 | +#ifdef CONFIG_BCM63XX_CPU_6348 |
| 121 | + &board_livebox_blue5g |
| 122 | +#endif /* CONFIG_BCM63XX_CPU_6348 */ |
| 123 | +}; |
| 124 | + |
| 125 | +static struct of_device_id const livebox_boards_dt[] = { |
| 126 | + { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, |
| 127 | + { } |
| 128 | +}; |
| 129 | + |
| 130 | +/* |
| 131 | + * register & return a new board mac address |
| 132 | + */ |
| 133 | +static int livebox_get_mac_address(u8 *mac) |
| 134 | +{ |
| 135 | + u8 *p; |
| 136 | + int count; |
| 137 | + |
| 138 | + memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); |
| 139 | + |
| 140 | + p = mac + ETH_ALEN - 1; |
| 141 | + count = mac_addr_used; |
| 142 | + |
| 143 | + while (count--) { |
| 144 | + do { |
| 145 | + (*p)++; |
| 146 | + if (*p != 0) |
| 147 | + break; |
| 148 | + p--; |
| 149 | + } while (p != mac); |
| 150 | + } |
| 151 | + |
| 152 | + if (p == mac) { |
| 153 | + printk(KERN_ERR PFX "unable to fetch mac address\n"); |
| 154 | + return -ENODEV; |
| 155 | + } |
| 156 | + mac_addr_used++; |
| 157 | + |
| 158 | + return 0; |
| 159 | +} |
| 160 | + |
| 161 | +/* |
| 162 | + * early init callback |
| 163 | + */ |
| 164 | +#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff |
| 165 | +#define LIVEBOX_BOOT_ADDR 0x1e400000 |
| 166 | + |
| 167 | +#define LIVEBOX_HW_BLUE5G_9 0x90 |
| 168 | + |
| 169 | +void __init board_livebox_init(void) |
| 170 | +{ |
| 171 | + u32 val; |
| 172 | + u8 hw_version; |
| 173 | + const struct board_info *board; |
| 174 | + const struct of_device_id *board_match; |
| 175 | + |
| 176 | + /* find board by compat */ |
| 177 | + board_match = bcm63xx_match_board(livebox_boards_dt); |
| 178 | + if (board_match) { |
| 179 | + board = board_match->data; |
| 180 | + } else { |
| 181 | + /* Get hardware version */ |
| 182 | + val = bcm_gpio_readl(GPIO_CTL_LO_REG); |
| 183 | + val &= ~LIVEBOX_GPIO_DETECT_MASK; |
| 184 | + bcm_gpio_writel(val, GPIO_CTL_LO_REG); |
| 185 | + |
| 186 | + hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); |
| 187 | + hw_version &= LIVEBOX_GPIO_DETECT_MASK; |
| 188 | + |
| 189 | + switch (hw_version) { |
| 190 | + case LIVEBOX_HW_BLUE5G_9: |
| 191 | + printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); |
| 192 | + board = bcm963xx_boards[0]; |
| 193 | + break; |
| 194 | + default: |
| 195 | + printk(KERN_INFO PFX "Unknown livebox version: %02x\n", |
| 196 | + hw_version); |
| 197 | + /* use default livebox configuration */ |
| 198 | + board = bcm963xx_boards[0]; |
| 199 | + break; |
| 200 | + } |
| 201 | + } |
| 202 | + |
| 203 | + /* use default livebox configuration */ |
| 204 | + board_early_setup(board, livebox_get_mac_address); |
| 205 | + |
| 206 | + /* read base address of boot chip select (0) */ |
| 207 | + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); |
| 208 | + val &= MPI_CSBASE_BASE_MASK; |
| 209 | + if (val != LIVEBOX_BOOT_ADDR) { |
| 210 | + printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", |
| 211 | + val, LIVEBOX_BOOT_ADDR); |
| 212 | + bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); |
| 213 | + } |
| 214 | +} |