b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame] | 1 | From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001 |
| 2 | From: Russell King <rmk+kernel@armlinux.org.uk> |
| 3 | Date: Sat, 16 Nov 2019 11:30:18 +0000 |
| 4 | Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and |
| 5 | current settings |
| 6 | |
| 7 | Split link_an_mode between the configured setting and the current |
| 8 | operating setting. This is an important distinction to make when we |
| 9 | need to configure PHY mode for a plugged SFP+ module that does not |
| 10 | use in-band signalling. |
| 11 | |
| 12 | Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
| 13 | --- |
| 14 | drivers/net/phy/phylink.c | 59 ++++++++++++++++++++------------------- |
| 15 | 1 file changed, 31 insertions(+), 28 deletions(-) |
| 16 | |
| 17 | --- a/drivers/net/phy/phylink.c |
| 18 | +++ b/drivers/net/phy/phylink.c |
| 19 | @@ -48,7 +48,8 @@ struct phylink { |
| 20 | unsigned long phylink_disable_state; /* bitmask of disables */ |
| 21 | struct phy_device *phydev; |
| 22 | phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ |
| 23 | - u8 link_an_mode; /* MLO_AN_xxx */ |
| 24 | + u8 cfg_link_an_mode; /* MLO_AN_xxx */ |
| 25 | + u8 cur_link_an_mode; |
| 26 | u8 link_port; /* The current non-phy ethtool port */ |
| 27 | __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); |
| 28 | |
| 29 | @@ -258,12 +259,12 @@ static int phylink_parse_mode(struct phy |
| 30 | |
| 31 | dn = fwnode_get_named_child_node(fwnode, "fixed-link"); |
| 32 | if (dn || fwnode_property_present(fwnode, "fixed-link")) |
| 33 | - pl->link_an_mode = MLO_AN_FIXED; |
| 34 | + pl->cfg_link_an_mode = MLO_AN_FIXED; |
| 35 | fwnode_handle_put(dn); |
| 36 | |
| 37 | if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 && |
| 38 | strcmp(managed, "in-band-status") == 0) { |
| 39 | - if (pl->link_an_mode == MLO_AN_FIXED) { |
| 40 | + if (pl->cfg_link_an_mode == MLO_AN_FIXED) { |
| 41 | phylink_err(pl, |
| 42 | "can't use both fixed-link and in-band-status\n"); |
| 43 | return -EINVAL; |
| 44 | @@ -275,7 +276,7 @@ static int phylink_parse_mode(struct phy |
| 45 | phylink_set(pl->supported, Asym_Pause); |
| 46 | phylink_set(pl->supported, Pause); |
| 47 | pl->link_config.an_enabled = true; |
| 48 | - pl->link_an_mode = MLO_AN_INBAND; |
| 49 | + pl->cfg_link_an_mode = MLO_AN_INBAND; |
| 50 | |
| 51 | switch (pl->link_config.interface) { |
| 52 | case PHY_INTERFACE_MODE_SGMII: |
| 53 | @@ -335,14 +336,14 @@ static void phylink_mac_config(struct ph |
| 54 | { |
| 55 | phylink_dbg(pl, |
| 56 | "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n", |
| 57 | - __func__, phylink_an_mode_str(pl->link_an_mode), |
| 58 | + __func__, phylink_an_mode_str(pl->cur_link_an_mode), |
| 59 | phy_modes(state->interface), |
| 60 | phy_speed_to_str(state->speed), |
| 61 | phy_duplex_to_str(state->duplex), |
| 62 | __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising, |
| 63 | state->pause, state->link, state->an_enabled); |
| 64 | |
| 65 | - pl->ops->mac_config(pl->config, pl->link_an_mode, state); |
| 66 | + pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state); |
| 67 | } |
| 68 | |
| 69 | static void phylink_mac_config_up(struct phylink *pl, |
| 70 | @@ -443,7 +444,7 @@ static void phylink_mac_link_up(struct p |
| 71 | struct net_device *ndev = pl->netdev; |
| 72 | |
| 73 | pl->cur_interface = link_state.interface; |
| 74 | - pl->ops->mac_link_up(pl->config, pl->link_an_mode, |
| 75 | + pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode, |
| 76 | pl->cur_interface, pl->phydev); |
| 77 | |
| 78 | if (ndev) |
| 79 | @@ -462,7 +463,7 @@ static void phylink_mac_link_down(struct |
| 80 | |
| 81 | if (ndev) |
| 82 | netif_carrier_off(ndev); |
| 83 | - pl->ops->mac_link_down(pl->config, pl->link_an_mode, |
| 84 | + pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode, |
| 85 | pl->cur_interface); |
| 86 | phylink_info(pl, "Link is Down\n"); |
| 87 | } |
| 88 | @@ -481,7 +482,7 @@ static void phylink_resolve(struct work_ |
| 89 | } else if (pl->mac_link_dropped) { |
| 90 | link_state.link = false; |
| 91 | } else { |
| 92 | - switch (pl->link_an_mode) { |
| 93 | + switch (pl->cur_link_an_mode) { |
| 94 | case MLO_AN_PHY: |
| 95 | link_state = pl->phy_state; |
| 96 | phylink_resolve_flow(pl, &link_state); |
| 97 | @@ -649,7 +650,7 @@ struct phylink *phylink_create(struct ph |
| 98 | return ERR_PTR(ret); |
| 99 | } |
| 100 | |
| 101 | - if (pl->link_an_mode == MLO_AN_FIXED) { |
| 102 | + if (pl->cfg_link_an_mode == MLO_AN_FIXED) { |
| 103 | ret = phylink_parse_fixedlink(pl, fwnode); |
| 104 | if (ret < 0) { |
| 105 | kfree(pl); |
| 106 | @@ -657,6 +658,8 @@ struct phylink *phylink_create(struct ph |
| 107 | } |
| 108 | } |
| 109 | |
| 110 | + pl->cur_link_an_mode = pl->cfg_link_an_mode; |
| 111 | + |
| 112 | ret = phylink_register_sfp(pl, fwnode); |
| 113 | if (ret < 0) { |
| 114 | kfree(pl); |
| 115 | @@ -770,8 +773,8 @@ static int phylink_bringup_phy(struct ph |
| 116 | static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, |
| 117 | phy_interface_t interface) |
| 118 | { |
| 119 | - if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED || |
| 120 | - (pl->link_an_mode == MLO_AN_INBAND && |
| 121 | + if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || |
| 122 | + (pl->cfg_link_an_mode == MLO_AN_INBAND && |
| 123 | phy_interface_mode_is_8023z(interface)))) |
| 124 | return -EINVAL; |
| 125 | |
| 126 | @@ -838,8 +841,8 @@ int phylink_of_phy_connect(struct phylin |
| 127 | int ret; |
| 128 | |
| 129 | /* Fixed links and 802.3z are handled without needing a PHY */ |
| 130 | - if (pl->link_an_mode == MLO_AN_FIXED || |
| 131 | - (pl->link_an_mode == MLO_AN_INBAND && |
| 132 | + if (pl->cfg_link_an_mode == MLO_AN_FIXED || |
| 133 | + (pl->cfg_link_an_mode == MLO_AN_INBAND && |
| 134 | phy_interface_mode_is_8023z(pl->link_interface))) |
| 135 | return 0; |
| 136 | |
| 137 | @@ -850,7 +853,7 @@ int phylink_of_phy_connect(struct phylin |
| 138 | phy_node = of_parse_phandle(dn, "phy-device", 0); |
| 139 | |
| 140 | if (!phy_node) { |
| 141 | - if (pl->link_an_mode == MLO_AN_PHY) |
| 142 | + if (pl->cfg_link_an_mode == MLO_AN_PHY) |
| 143 | return -ENODEV; |
| 144 | return 0; |
| 145 | } |
| 146 | @@ -913,7 +916,7 @@ int phylink_fixed_state_cb(struct phylin |
| 147 | /* It does not make sense to let the link be overriden unless we use |
| 148 | * MLO_AN_FIXED |
| 149 | */ |
| 150 | - if (pl->link_an_mode != MLO_AN_FIXED) |
| 151 | + if (pl->cfg_link_an_mode != MLO_AN_FIXED) |
| 152 | return -EINVAL; |
| 153 | |
| 154 | mutex_lock(&pl->state_mutex); |
| 155 | @@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl) |
| 156 | ASSERT_RTNL(); |
| 157 | |
| 158 | phylink_info(pl, "configuring for %s/%s link mode\n", |
| 159 | - phylink_an_mode_str(pl->link_an_mode), |
| 160 | + phylink_an_mode_str(pl->cur_link_an_mode), |
| 161 | phy_modes(pl->link_config.interface)); |
| 162 | |
| 163 | /* Always set the carrier off */ |
| 164 | @@ -986,7 +989,7 @@ void phylink_start(struct phylink *pl) |
| 165 | clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); |
| 166 | phylink_run_resolve(pl); |
| 167 | |
| 168 | - if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) { |
| 169 | + if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { |
| 170 | int irq = gpiod_to_irq(pl->link_gpio); |
| 171 | |
| 172 | if (irq > 0) { |
| 173 | @@ -1001,7 +1004,7 @@ void phylink_start(struct phylink *pl) |
| 174 | if (irq <= 0) |
| 175 | mod_timer(&pl->link_poll, jiffies + HZ); |
| 176 | } |
| 177 | - if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) |
| 178 | + if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) |
| 179 | mod_timer(&pl->link_poll, jiffies + HZ); |
| 180 | if (pl->phydev) |
| 181 | phy_start(pl->phydev); |
| 182 | @@ -1128,7 +1131,7 @@ int phylink_ethtool_ksettings_get(struct |
| 183 | |
| 184 | linkmode_copy(kset->link_modes.supported, pl->supported); |
| 185 | |
| 186 | - switch (pl->link_an_mode) { |
| 187 | + switch (pl->cur_link_an_mode) { |
| 188 | case MLO_AN_FIXED: |
| 189 | /* We are using fixed settings. Report these as the |
| 190 | * current link settings - and note that these also |
| 191 | @@ -1200,7 +1203,7 @@ int phylink_ethtool_ksettings_set(struct |
| 192 | /* If we have a fixed link (as specified by firmware), refuse |
| 193 | * to change link parameters. |
| 194 | */ |
| 195 | - if (pl->link_an_mode == MLO_AN_FIXED && |
| 196 | + if (pl->cur_link_an_mode == MLO_AN_FIXED && |
| 197 | (s->speed != pl->link_config.speed || |
| 198 | s->duplex != pl->link_config.duplex)) |
| 199 | return -EINVAL; |
| 200 | @@ -1212,7 +1215,7 @@ int phylink_ethtool_ksettings_set(struct |
| 201 | __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising); |
| 202 | } else { |
| 203 | /* If we have a fixed link, refuse to enable autonegotiation */ |
| 204 | - if (pl->link_an_mode == MLO_AN_FIXED) |
| 205 | + if (pl->cur_link_an_mode == MLO_AN_FIXED) |
| 206 | return -EINVAL; |
| 207 | |
| 208 | config.speed = SPEED_UNKNOWN; |
| 209 | @@ -1254,7 +1257,7 @@ int phylink_ethtool_ksettings_set(struct |
| 210 | * configuration. For a fixed link, this isn't able to change any |
| 211 | * parameters, which just leaves inband mode. |
| 212 | */ |
| 213 | - if (pl->link_an_mode == MLO_AN_INBAND && |
| 214 | + if (pl->cur_link_an_mode == MLO_AN_INBAND && |
| 215 | !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { |
| 216 | phylink_mac_config(pl, &pl->link_config); |
| 217 | phylink_mac_an_restart(pl); |
| 218 | @@ -1344,7 +1347,7 @@ int phylink_ethtool_set_pauseparam(struc |
| 219 | pause->tx_pause); |
| 220 | } else if (!test_bit(PHYLINK_DISABLE_STOPPED, |
| 221 | &pl->phylink_disable_state)) { |
| 222 | - switch (pl->link_an_mode) { |
| 223 | + switch (pl->cur_link_an_mode) { |
| 224 | case MLO_AN_FIXED: |
| 225 | /* Should we allow fixed links to change against the config? */ |
| 226 | phylink_resolve_flow(pl, config); |
| 227 | @@ -1551,7 +1554,7 @@ static int phylink_mii_read(struct phyli |
| 228 | struct phylink_link_state state; |
| 229 | int val = 0xffff; |
| 230 | |
| 231 | - switch (pl->link_an_mode) { |
| 232 | + switch (pl->cur_link_an_mode) { |
| 233 | case MLO_AN_FIXED: |
| 234 | if (phy_id == 0) { |
| 235 | phylink_get_fixed_state(pl, &state); |
| 236 | @@ -1579,7 +1582,7 @@ static int phylink_mii_read(struct phyli |
| 237 | static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, |
| 238 | unsigned int reg, unsigned int val) |
| 239 | { |
| 240 | - switch (pl->link_an_mode) { |
| 241 | + switch (pl->cur_link_an_mode) { |
| 242 | case MLO_AN_FIXED: |
| 243 | break; |
| 244 | |
| 245 | @@ -1753,10 +1756,10 @@ static int phylink_sfp_module_insert(voi |
| 246 | linkmode_copy(pl->link_config.advertising, config.advertising); |
| 247 | } |
| 248 | |
| 249 | - if (pl->link_an_mode != MLO_AN_INBAND || |
| 250 | + if (pl->cur_link_an_mode != MLO_AN_INBAND || |
| 251 | pl->link_config.interface != config.interface) { |
| 252 | pl->link_config.interface = config.interface; |
| 253 | - pl->link_an_mode = MLO_AN_INBAND; |
| 254 | + pl->cur_link_an_mode = MLO_AN_INBAND; |
| 255 | |
| 256 | changed = true; |
| 257 | |