target/linux/layerscape/patches-5.4/805-display-0016-drm-imx-hdmi-support-arc-function.patch

From a10d0b8516bc3f48f0c1005f8e69efce12cea8f9 Mon Sep 17 00:00:00 2001
From: Sandor Yu <Sandor.yu@nxp.com>
Date: Mon, 23 Sep 2019 09:09:38 +0800
Subject: [PATCH] drm: imx: hdmi: support arc function

Add HDMI ARC configurate function.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
---
 drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c | 59 +++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

--- a/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
+++ b/drivers/gpu/drm/imx/cdn-mhdp-hdmi-phy.c
@@ -192,6 +192,62 @@ static const struct hdmi_pll_tuning imx8
 	{ 7, 5200000, 6000000, 0x7, 0x1, 0x0, 0x04, 0x0D, 680, 0x04F, 0, 0, 0 }
 };
 
+static void hdmi_arc_config(struct cdns_mhdp_device *mhdp)
+{
+	u16 txpu_calib_code;
+	u16 txpd_calib_code;
+	u16 txpu_adj_calib_code;
+	u16 txpd_adj_calib_code;
+	u16 prev_calib_code;
+	u16 new_calib_code;
+	u16 rdata;
+
+	/* Power ARC */
+	cdns_phy_reg_write(mhdp, TXDA_CYA_AUXDA_CYA, 0x0001);
+
+	prev_calib_code = cdns_phy_reg_read(mhdp, TX_DIG_CTRL_REG_2);
+	txpu_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPUCAL_CTRL);
+	txpd_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPDCAL_CTRL);
+	txpu_adj_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPU_ADJ_CTRL);
+	txpd_adj_calib_code = cdns_phy_reg_read(mhdp, CMN_TXPD_ADJ_CTRL);
+
+	new_calib_code = ((txpu_calib_code + txpd_calib_code) / 2)
+		+ txpu_adj_calib_code + txpd_adj_calib_code;
+
+	if (new_calib_code != prev_calib_code) {
+		rdata = cdns_phy_reg_read(mhdp, TX_ANA_CTRL_REG_1);
+		rdata &= 0xDFFF;
+		cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, rdata);
+		cdns_phy_reg_write(mhdp, TX_DIG_CTRL_REG_2, new_calib_code);
+		mdelay(10);
+		rdata |= 0x2000;
+		cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, rdata);
+		udelay(150);
+	}
+
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0100);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x0300);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_3, 0x0000);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2008);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2018);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2098);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030C);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_5, 0x0010);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_4, 0x4001);
+	mdelay(5);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_1, 0x2198);
+	mdelay(5);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030D);
+	udelay(100);
+	cdns_phy_reg_write(mhdp, TX_ANA_CTRL_REG_2, 0x030F);
+}
+
 static void hdmi_phy_set_vswing(struct cdns_mhdp_device *mhdp)
 {
 	const u32 num_lanes = 4;
@@ -604,6 +660,9 @@ static int hdmi_phy_power_up(struct cdns
 		return -1;
 	}
 
+	/* Power up ARC */
+	hdmi_arc_config(mhdp);
+
 	/* Configure PHY in A0 mode (PHY must be in the A0 power
 	 * state in order to transmit data)
 	 */