| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | ZTE zx2967 I2C controller |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: must be "zte,zx296718-i2c" |
| 5 | - reg: physical address and length of the device registers |
| 6 | - interrupts: a single interrupt specifier |
| 7 | - clocks: clock for the device |
| 8 | - #address-cells: should be <1> |
| 9 | - #size-cells: should be <0> |
| 10 | - clock-frequency: the desired I2C bus clock frequency. |
| 11 | |
| 12 | Examples: |
| 13 | |
| 14 | i2c@112000 { |
| 15 | compatible = "zte,zx296718-i2c"; |
| 16 | reg = <0x00112000 0x1000>; |
| 17 | interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| 18 | clocks = <&osc24m>; |
| 19 | #address-cells = <1> |
| 20 | #size-cells = <0>; |
| 21 | clock-frequency = <1600000>; |
| 22 | }; |