b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| 2 | /* |
| 3 | * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> |
| 4 | * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> |
| 5 | */ |
| 6 | |
| 7 | #ifndef __AR7_H__ |
| 8 | #define __AR7_H__ |
| 9 | |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/io.h> |
| 12 | #include <linux/errno.h> |
| 13 | |
| 14 | #include <asm/addrspace.h> |
| 15 | |
| 16 | #define AR7_SDRAM_BASE 0x14000000 |
| 17 | |
| 18 | #define AR7_REGS_BASE 0x08610000 |
| 19 | |
| 20 | #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) |
| 21 | #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) |
| 22 | /* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ |
| 23 | #define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) |
| 24 | #define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) |
| 25 | #define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) |
| 26 | #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) |
| 27 | #define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) |
| 28 | #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) |
| 29 | #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) |
| 30 | #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) |
| 31 | #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) |
| 32 | #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) |
| 33 | #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) |
| 34 | #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) |
| 35 | #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) |
| 36 | |
| 37 | #define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) |
| 38 | #define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) |
| 39 | #define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) |
| 40 | |
| 41 | /* Titan registers */ |
| 42 | #define TITAN_REGS_ESWITCH_BASE (0x08640000) |
| 43 | #define TITAN_REGS_MAC0 (TITAN_REGS_ESWITCH_BASE) |
| 44 | #define TITAN_REGS_MAC1 (TITAN_REGS_ESWITCH_BASE + 0x0800) |
| 45 | #define TITAN_REGS_MDIO (TITAN_REGS_ESWITCH_BASE + 0x02000) |
| 46 | #define TITAN_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1c00) |
| 47 | #define TITAN_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1300) |
| 48 | |
| 49 | #define AR7_RESET_PERIPHERAL 0x0 |
| 50 | #define AR7_RESET_SOFTWARE 0x4 |
| 51 | #define AR7_RESET_STATUS 0x8 |
| 52 | |
| 53 | #define AR7_RESET_BIT_CPMAC_LO 17 |
| 54 | #define AR7_RESET_BIT_CPMAC_HI 21 |
| 55 | #define AR7_RESET_BIT_MDIO 22 |
| 56 | #define AR7_RESET_BIT_EPHY 26 |
| 57 | |
| 58 | #define TITAN_RESET_BIT_EPHY1 28 |
| 59 | |
| 60 | /* GPIO control registers */ |
| 61 | #define AR7_GPIO_INPUT 0x0 |
| 62 | #define AR7_GPIO_OUTPUT 0x4 |
| 63 | #define AR7_GPIO_DIR 0x8 |
| 64 | #define AR7_GPIO_ENABLE 0xc |
| 65 | #define TITAN_GPIO_INPUT_0 0x0 |
| 66 | #define TITAN_GPIO_INPUT_1 0x4 |
| 67 | #define TITAN_GPIO_OUTPUT_0 0x8 |
| 68 | #define TITAN_GPIO_OUTPUT_1 0xc |
| 69 | #define TITAN_GPIO_DIR_0 0x10 |
| 70 | #define TITAN_GPIO_DIR_1 0x14 |
| 71 | #define TITAN_GPIO_ENBL_0 0x18 |
| 72 | #define TITAN_GPIO_ENBL_1 0x1c |
| 73 | |
| 74 | #define AR7_CHIP_7100 0x18 |
| 75 | #define AR7_CHIP_7200 0x2b |
| 76 | #define AR7_CHIP_7300 0x05 |
| 77 | #define AR7_CHIP_TITAN 0x07 |
| 78 | #define TITAN_CHIP_1050 0x0f |
| 79 | #define TITAN_CHIP_1055 0x0e |
| 80 | #define TITAN_CHIP_1056 0x0d |
| 81 | #define TITAN_CHIP_1060 0x07 |
| 82 | |
| 83 | /* Interrupts */ |
| 84 | #define AR7_IRQ_UART0 15 |
| 85 | #define AR7_IRQ_UART1 16 |
| 86 | |
| 87 | /* Clocks */ |
| 88 | #define AR7_AFE_CLOCK 35328000 |
| 89 | #define AR7_REF_CLOCK 25000000 |
| 90 | #define AR7_XTAL_CLOCK 24000000 |
| 91 | |
| 92 | /* DCL */ |
| 93 | #define AR7_WDT_HW_ENA 0x10 |
| 94 | |
| 95 | struct plat_cpmac_data { |
| 96 | int reset_bit; |
| 97 | int power_bit; |
| 98 | u32 phy_mask; |
| 99 | char dev_addr[6]; |
| 100 | }; |
| 101 | |
| 102 | struct plat_dsl_data { |
| 103 | int reset_bit_dsl; |
| 104 | int reset_bit_sar; |
| 105 | }; |
| 106 | |
| 107 | extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; |
| 108 | |
| 109 | static inline int ar7_is_titan(void) |
| 110 | { |
| 111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == |
| 112 | AR7_CHIP_TITAN; |
| 113 | } |
| 114 | |
| 115 | static inline u16 ar7_chip_id(void) |
| 116 | { |
| 117 | return ar7_is_titan() ? AR7_CHIP_TITAN : (readl((void *) |
| 118 | KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff); |
| 119 | } |
| 120 | |
| 121 | static inline u16 titan_chip_id(void) |
| 122 | { |
| 123 | unsigned int val = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + |
| 124 | TITAN_GPIO_INPUT_1)); |
| 125 | return ((val >> 12) & 0x0f); |
| 126 | } |
| 127 | |
| 128 | static inline u8 ar7_chip_rev(void) |
| 129 | { |
| 130 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 : |
| 131 | 0x14))) >> 16) & 0xff; |
| 132 | } |
| 133 | |
| 134 | struct clk { |
| 135 | unsigned int rate; |
| 136 | }; |
| 137 | |
| 138 | static inline int ar7_has_high_cpmac(void) |
| 139 | { |
| 140 | u16 chip_id = ar7_chip_id(); |
| 141 | switch (chip_id) { |
| 142 | case AR7_CHIP_7100: |
| 143 | case AR7_CHIP_7200: |
| 144 | return 0; |
| 145 | case AR7_CHIP_7300: |
| 146 | return 1; |
| 147 | default: |
| 148 | return -ENXIO; |
| 149 | } |
| 150 | } |
| 151 | #define ar7_has_high_vlynq ar7_has_high_cpmac |
| 152 | #define ar7_has_second_uart ar7_has_high_cpmac |
| 153 | |
| 154 | static inline void ar7_device_enable(u32 bit) |
| 155 | { |
| 156 | void *reset_reg = |
| 157 | (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); |
| 158 | writel(readl(reset_reg) | (1 << bit), reset_reg); |
| 159 | msleep(20); |
| 160 | } |
| 161 | |
| 162 | static inline void ar7_device_disable(u32 bit) |
| 163 | { |
| 164 | void *reset_reg = |
| 165 | (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); |
| 166 | writel(readl(reset_reg) & ~(1 << bit), reset_reg); |
| 167 | msleep(20); |
| 168 | } |
| 169 | |
| 170 | static inline void ar7_device_reset(u32 bit) |
| 171 | { |
| 172 | ar7_device_disable(bit); |
| 173 | ar7_device_enable(bit); |
| 174 | } |
| 175 | |
| 176 | static inline void ar7_device_on(u32 bit) |
| 177 | { |
| 178 | void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); |
| 179 | writel(readl(power_reg) | (1 << bit), power_reg); |
| 180 | msleep(20); |
| 181 | } |
| 182 | |
| 183 | static inline void ar7_device_off(u32 bit) |
| 184 | { |
| 185 | void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); |
| 186 | writel(readl(power_reg) & ~(1 << bit), power_reg); |
| 187 | msleep(20); |
| 188 | } |
| 189 | |
| 190 | int __init ar7_gpio_init(void); |
| 191 | void __init ar7_init_clocks(void); |
| 192 | |
| 193 | /* Board specific GPIO functions */ |
| 194 | int ar7_gpio_enable(unsigned gpio); |
| 195 | int ar7_gpio_disable(unsigned gpio); |
| 196 | |
| 197 | #endif /* __AR7_H__ */ |