b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * arch/powerpc/platforms/embedded6xx/wii.c |
| 4 | * |
| 5 | * Nintendo Wii board-specific support |
| 6 | * Copyright (C) 2008-2009 The GameCube Linux Team |
| 7 | * Copyright (C) 2008,2009 Albert Herranz |
| 8 | */ |
| 9 | #define DRV_MODULE_NAME "wii" |
| 10 | #define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt |
| 11 | |
| 12 | #include <linux/kernel.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/irq.h> |
| 15 | #include <linux/seq_file.h> |
| 16 | #include <linux/of_platform.h> |
| 17 | #include <linux/memblock.h> |
| 18 | #include <mm/mmu_decl.h> |
| 19 | |
| 20 | #include <asm/io.h> |
| 21 | #include <asm/machdep.h> |
| 22 | #include <asm/prom.h> |
| 23 | #include <asm/time.h> |
| 24 | #include <asm/udbg.h> |
| 25 | |
| 26 | #include "flipper-pic.h" |
| 27 | #include "hlwd-pic.h" |
| 28 | #include "usbgecko_udbg.h" |
| 29 | |
| 30 | /* control block */ |
| 31 | #define HW_CTRL_COMPATIBLE "nintendo,hollywood-control" |
| 32 | |
| 33 | #define HW_CTRL_RESETS 0x94 |
| 34 | #define HW_CTRL_RESETS_SYS (1<<0) |
| 35 | |
| 36 | /* gpio */ |
| 37 | #define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio" |
| 38 | |
| 39 | #define HW_GPIO_BASE(idx) (idx * 0x20) |
| 40 | #define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0) |
| 41 | #define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4) |
| 42 | #define HW_GPIO_OWNER (HW_GPIO_BASE(1) + 0x1c) |
| 43 | |
| 44 | #define HW_GPIO_SHUTDOWN (1<<1) |
| 45 | #define HW_GPIO_SLOT_LED (1<<5) |
| 46 | #define HW_GPIO_SENSOR_BAR (1<<8) |
| 47 | |
| 48 | |
| 49 | static void __iomem *hw_ctrl; |
| 50 | static void __iomem *hw_gpio; |
| 51 | |
| 52 | static int __init page_aligned(unsigned long x) |
| 53 | { |
| 54 | return !(x & (PAGE_SIZE-1)); |
| 55 | } |
| 56 | |
| 57 | void __init wii_memory_fixups(void) |
| 58 | { |
| 59 | struct memblock_region *p = memblock.memory.regions; |
| 60 | |
| 61 | BUG_ON(memblock.memory.cnt != 2); |
| 62 | BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); |
| 63 | } |
| 64 | |
| 65 | static void __noreturn wii_spin(void) |
| 66 | { |
| 67 | local_irq_disable(); |
| 68 | for (;;) |
| 69 | cpu_relax(); |
| 70 | } |
| 71 | |
| 72 | static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) |
| 73 | { |
| 74 | void __iomem *hw_regs = NULL; |
| 75 | struct device_node *np; |
| 76 | struct resource res; |
| 77 | int error = -ENODEV; |
| 78 | |
| 79 | np = of_find_compatible_node(NULL, NULL, compatible); |
| 80 | if (!np) { |
| 81 | pr_err("no compatible node found for %s\n", compatible); |
| 82 | goto out; |
| 83 | } |
| 84 | error = of_address_to_resource(np, 0, &res); |
| 85 | if (error) { |
| 86 | pr_err("no valid reg found for %pOFn\n", np); |
| 87 | goto out_put; |
| 88 | } |
| 89 | |
| 90 | hw_regs = ioremap(res.start, resource_size(&res)); |
| 91 | if (hw_regs) { |
| 92 | pr_info("%s at 0x%pa mapped to 0x%p\n", name, |
| 93 | &res.start, hw_regs); |
| 94 | } |
| 95 | |
| 96 | out_put: |
| 97 | of_node_put(np); |
| 98 | out: |
| 99 | return hw_regs; |
| 100 | } |
| 101 | |
| 102 | static void __init wii_setup_arch(void) |
| 103 | { |
| 104 | hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE); |
| 105 | hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE); |
| 106 | if (hw_gpio) { |
| 107 | /* turn off the front blue led and IR light */ |
| 108 | clrbits32(hw_gpio + HW_GPIO_OUT(0), |
| 109 | HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR); |
| 110 | } |
| 111 | } |
| 112 | |
| 113 | static void __noreturn wii_restart(char *cmd) |
| 114 | { |
| 115 | local_irq_disable(); |
| 116 | |
| 117 | if (hw_ctrl) { |
| 118 | /* clear the system reset pin to cause a reset */ |
| 119 | clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS); |
| 120 | } |
| 121 | wii_spin(); |
| 122 | } |
| 123 | |
| 124 | static void wii_power_off(void) |
| 125 | { |
| 126 | local_irq_disable(); |
| 127 | |
| 128 | if (hw_gpio) { |
| 129 | /* |
| 130 | * set the owner of the shutdown pin to ARM, because it is |
| 131 | * accessed through the registers for the ARM, below |
| 132 | */ |
| 133 | clrbits32(hw_gpio + HW_GPIO_OWNER, HW_GPIO_SHUTDOWN); |
| 134 | |
| 135 | /* make sure that the poweroff GPIO is configured as output */ |
| 136 | setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN); |
| 137 | |
| 138 | /* drive the poweroff GPIO high */ |
| 139 | setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN); |
| 140 | } |
| 141 | wii_spin(); |
| 142 | } |
| 143 | |
| 144 | static void __noreturn wii_halt(void) |
| 145 | { |
| 146 | if (ppc_md.restart) |
| 147 | ppc_md.restart(NULL); |
| 148 | wii_spin(); |
| 149 | } |
| 150 | |
| 151 | static void __init wii_pic_probe(void) |
| 152 | { |
| 153 | flipper_pic_probe(); |
| 154 | hlwd_pic_probe(); |
| 155 | } |
| 156 | |
| 157 | static int __init wii_probe(void) |
| 158 | { |
| 159 | if (!of_machine_is_compatible("nintendo,wii")) |
| 160 | return 0; |
| 161 | |
| 162 | pm_power_off = wii_power_off; |
| 163 | |
| 164 | ug_udbg_init(); |
| 165 | |
| 166 | return 1; |
| 167 | } |
| 168 | |
| 169 | static void wii_shutdown(void) |
| 170 | { |
| 171 | hlwd_quiesce(); |
| 172 | flipper_quiesce(); |
| 173 | } |
| 174 | |
| 175 | define_machine(wii) { |
| 176 | .name = "wii", |
| 177 | .probe = wii_probe, |
| 178 | .setup_arch = wii_setup_arch, |
| 179 | .restart = wii_restart, |
| 180 | .halt = wii_halt, |
| 181 | .init_IRQ = wii_pic_probe, |
| 182 | .get_irq = flipper_pic_get_irq, |
| 183 | .calibrate_decr = generic_calibrate_decr, |
| 184 | .progress = udbg_progress, |
| 185 | .machine_shutdown = wii_shutdown, |
| 186 | }; |
| 187 | |
| 188 | static const struct of_device_id wii_of_bus[] = { |
| 189 | { .compatible = "nintendo,hollywood", }, |
| 190 | { }, |
| 191 | }; |
| 192 | |
| 193 | static int __init wii_device_probe(void) |
| 194 | { |
| 195 | if (!machine_is(wii)) |
| 196 | return 0; |
| 197 | |
| 198 | of_platform_populate(NULL, wii_of_bus, NULL, NULL); |
| 199 | return 0; |
| 200 | } |
| 201 | device_initcall(wii_device_probe); |
| 202 | |