b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Procedures for creating, accessing and interpreting the device tree. |
| 4 | * |
| 5 | * Paul Mackerras August 1996. |
| 6 | * Copyright (C) 1996-2005 Paul Mackerras. |
| 7 | * |
| 8 | * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. |
| 9 | * {engebret|bergner}@us.ibm.com |
| 10 | * |
| 11 | * Adapted for sparc64 by David S. Miller davem@davemloft.net |
| 12 | */ |
| 13 | |
| 14 | #include <linux/memblock.h> |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/string.h> |
| 17 | #include <linux/types.h> |
| 18 | #include <linux/cpu.h> |
| 19 | #include <linux/mm.h> |
| 20 | #include <linux/of.h> |
| 21 | |
| 22 | #include <asm/prom.h> |
| 23 | #include <asm/oplib.h> |
| 24 | #include <asm/irq.h> |
| 25 | #include <asm/asi.h> |
| 26 | #include <asm/upa.h> |
| 27 | #include <asm/smp.h> |
| 28 | |
| 29 | #include "prom.h" |
| 30 | |
| 31 | void * __init prom_early_alloc(unsigned long size) |
| 32 | { |
| 33 | void *ret = memblock_alloc(size, SMP_CACHE_BYTES); |
| 34 | |
| 35 | if (!ret) { |
| 36 | prom_printf("prom_early_alloc(%lu) failed\n", size); |
| 37 | prom_halt(); |
| 38 | } |
| 39 | |
| 40 | prom_early_allocated += size; |
| 41 | |
| 42 | return ret; |
| 43 | } |
| 44 | |
| 45 | /* The following routines deal with the black magic of fully naming a |
| 46 | * node. |
| 47 | * |
| 48 | * Certain well known named nodes are just the simple name string. |
| 49 | * |
| 50 | * Actual devices have an address specifier appended to the base name |
| 51 | * string, like this "foo@addr". The "addr" can be in any number of |
| 52 | * formats, and the platform plus the type of the node determine the |
| 53 | * format and how it is constructed. |
| 54 | * |
| 55 | * For children of the ROOT node, the naming convention is fixed and |
| 56 | * determined by whether this is a sun4u or sun4v system. |
| 57 | * |
| 58 | * For children of other nodes, it is bus type specific. So |
| 59 | * we walk up the tree until we discover a "device_type" property |
| 60 | * we recognize and we go from there. |
| 61 | * |
| 62 | * As an example, the boot device on my workstation has a full path: |
| 63 | * |
| 64 | * /pci@1e,600000/ide@d/disk@0,0:c |
| 65 | */ |
| 66 | static void __init sun4v_path_component(struct device_node *dp, char *tmp_buf) |
| 67 | { |
| 68 | const char *name = of_get_property(dp, "name", NULL); |
| 69 | struct linux_prom64_registers *regs; |
| 70 | struct property *rprop; |
| 71 | u32 high_bits, low_bits, type; |
| 72 | |
| 73 | rprop = of_find_property(dp, "reg", NULL); |
| 74 | if (!rprop) |
| 75 | return; |
| 76 | |
| 77 | regs = rprop->value; |
| 78 | if (!of_node_is_root(dp->parent)) { |
| 79 | sprintf(tmp_buf, "%s@%x,%x", |
| 80 | name, |
| 81 | (unsigned int) (regs->phys_addr >> 32UL), |
| 82 | (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| 83 | return; |
| 84 | } |
| 85 | |
| 86 | type = regs->phys_addr >> 60UL; |
| 87 | high_bits = (regs->phys_addr >> 32UL) & 0x0fffffffUL; |
| 88 | low_bits = (regs->phys_addr & 0xffffffffUL); |
| 89 | |
| 90 | if (type == 0 || type == 8) { |
| 91 | const char *prefix = (type == 0) ? "m" : "i"; |
| 92 | |
| 93 | if (low_bits) |
| 94 | sprintf(tmp_buf, "%s@%s%x,%x", |
| 95 | name, prefix, |
| 96 | high_bits, low_bits); |
| 97 | else |
| 98 | sprintf(tmp_buf, "%s@%s%x", |
| 99 | name, |
| 100 | prefix, |
| 101 | high_bits); |
| 102 | } else if (type == 12) { |
| 103 | sprintf(tmp_buf, "%s@%x", |
| 104 | name, high_bits); |
| 105 | } |
| 106 | } |
| 107 | |
| 108 | static void __init sun4u_path_component(struct device_node *dp, char *tmp_buf) |
| 109 | { |
| 110 | const char *name = of_get_property(dp, "name", NULL); |
| 111 | struct linux_prom64_registers *regs; |
| 112 | struct property *prop; |
| 113 | |
| 114 | prop = of_find_property(dp, "reg", NULL); |
| 115 | if (!prop) |
| 116 | return; |
| 117 | |
| 118 | regs = prop->value; |
| 119 | if (!of_node_is_root(dp->parent)) { |
| 120 | sprintf(tmp_buf, "%s@%x,%x", |
| 121 | name, |
| 122 | (unsigned int) (regs->phys_addr >> 32UL), |
| 123 | (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| 124 | return; |
| 125 | } |
| 126 | |
| 127 | prop = of_find_property(dp, "upa-portid", NULL); |
| 128 | if (!prop) |
| 129 | prop = of_find_property(dp, "portid", NULL); |
| 130 | if (prop) { |
| 131 | unsigned long mask = 0xffffffffUL; |
| 132 | |
| 133 | if (tlb_type >= cheetah) |
| 134 | mask = 0x7fffff; |
| 135 | |
| 136 | sprintf(tmp_buf, "%s@%x,%x", |
| 137 | name, |
| 138 | *(u32 *)prop->value, |
| 139 | (unsigned int) (regs->phys_addr & mask)); |
| 140 | } |
| 141 | } |
| 142 | |
| 143 | /* "name@slot,offset" */ |
| 144 | static void __init sbus_path_component(struct device_node *dp, char *tmp_buf) |
| 145 | { |
| 146 | const char *name = of_get_property(dp, "name", NULL); |
| 147 | struct linux_prom_registers *regs; |
| 148 | struct property *prop; |
| 149 | |
| 150 | prop = of_find_property(dp, "reg", NULL); |
| 151 | if (!prop) |
| 152 | return; |
| 153 | |
| 154 | regs = prop->value; |
| 155 | sprintf(tmp_buf, "%s@%x,%x", |
| 156 | name, |
| 157 | regs->which_io, |
| 158 | regs->phys_addr); |
| 159 | } |
| 160 | |
| 161 | /* "name@devnum[,func]" */ |
| 162 | static void __init pci_path_component(struct device_node *dp, char *tmp_buf) |
| 163 | { |
| 164 | const char *name = of_get_property(dp, "name", NULL); |
| 165 | struct linux_prom_pci_registers *regs; |
| 166 | struct property *prop; |
| 167 | unsigned int devfn; |
| 168 | |
| 169 | prop = of_find_property(dp, "reg", NULL); |
| 170 | if (!prop) |
| 171 | return; |
| 172 | |
| 173 | regs = prop->value; |
| 174 | devfn = (regs->phys_hi >> 8) & 0xff; |
| 175 | if (devfn & 0x07) { |
| 176 | sprintf(tmp_buf, "%s@%x,%x", |
| 177 | name, |
| 178 | devfn >> 3, |
| 179 | devfn & 0x07); |
| 180 | } else { |
| 181 | sprintf(tmp_buf, "%s@%x", |
| 182 | name, |
| 183 | devfn >> 3); |
| 184 | } |
| 185 | } |
| 186 | |
| 187 | /* "name@UPA_PORTID,offset" */ |
| 188 | static void __init upa_path_component(struct device_node *dp, char *tmp_buf) |
| 189 | { |
| 190 | const char *name = of_get_property(dp, "name", NULL); |
| 191 | struct linux_prom64_registers *regs; |
| 192 | struct property *prop; |
| 193 | |
| 194 | prop = of_find_property(dp, "reg", NULL); |
| 195 | if (!prop) |
| 196 | return; |
| 197 | |
| 198 | regs = prop->value; |
| 199 | |
| 200 | prop = of_find_property(dp, "upa-portid", NULL); |
| 201 | if (!prop) |
| 202 | return; |
| 203 | |
| 204 | sprintf(tmp_buf, "%s@%x,%x", |
| 205 | name, |
| 206 | *(u32 *) prop->value, |
| 207 | (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| 208 | } |
| 209 | |
| 210 | /* "name@reg" */ |
| 211 | static void __init vdev_path_component(struct device_node *dp, char *tmp_buf) |
| 212 | { |
| 213 | const char *name = of_get_property(dp, "name", NULL); |
| 214 | struct property *prop; |
| 215 | u32 *regs; |
| 216 | |
| 217 | prop = of_find_property(dp, "reg", NULL); |
| 218 | if (!prop) |
| 219 | return; |
| 220 | |
| 221 | regs = prop->value; |
| 222 | |
| 223 | sprintf(tmp_buf, "%s@%x", name, *regs); |
| 224 | } |
| 225 | |
| 226 | /* "name@addrhi,addrlo" */ |
| 227 | static void __init ebus_path_component(struct device_node *dp, char *tmp_buf) |
| 228 | { |
| 229 | const char *name = of_get_property(dp, "name", NULL); |
| 230 | struct linux_prom64_registers *regs; |
| 231 | struct property *prop; |
| 232 | |
| 233 | prop = of_find_property(dp, "reg", NULL); |
| 234 | if (!prop) |
| 235 | return; |
| 236 | |
| 237 | regs = prop->value; |
| 238 | |
| 239 | sprintf(tmp_buf, "%s@%x,%x", |
| 240 | name, |
| 241 | (unsigned int) (regs->phys_addr >> 32UL), |
| 242 | (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| 243 | } |
| 244 | |
| 245 | /* "name@bus,addr" */ |
| 246 | static void __init i2c_path_component(struct device_node *dp, char *tmp_buf) |
| 247 | { |
| 248 | const char *name = of_get_property(dp, "name", NULL); |
| 249 | struct property *prop; |
| 250 | u32 *regs; |
| 251 | |
| 252 | prop = of_find_property(dp, "reg", NULL); |
| 253 | if (!prop) |
| 254 | return; |
| 255 | |
| 256 | regs = prop->value; |
| 257 | |
| 258 | /* This actually isn't right... should look at the #address-cells |
| 259 | * property of the i2c bus node etc. etc. |
| 260 | */ |
| 261 | sprintf(tmp_buf, "%s@%x,%x", |
| 262 | name, regs[0], regs[1]); |
| 263 | } |
| 264 | |
| 265 | /* "name@reg0[,reg1]" */ |
| 266 | static void __init usb_path_component(struct device_node *dp, char *tmp_buf) |
| 267 | { |
| 268 | const char *name = of_get_property(dp, "name", NULL); |
| 269 | struct property *prop; |
| 270 | u32 *regs; |
| 271 | |
| 272 | prop = of_find_property(dp, "reg", NULL); |
| 273 | if (!prop) |
| 274 | return; |
| 275 | |
| 276 | regs = prop->value; |
| 277 | |
| 278 | if (prop->length == sizeof(u32) || regs[1] == 1) { |
| 279 | sprintf(tmp_buf, "%s@%x", |
| 280 | name, regs[0]); |
| 281 | } else { |
| 282 | sprintf(tmp_buf, "%s@%x,%x", |
| 283 | name, regs[0], regs[1]); |
| 284 | } |
| 285 | } |
| 286 | |
| 287 | /* "name@reg0reg1[,reg2reg3]" */ |
| 288 | static void __init ieee1394_path_component(struct device_node *dp, char *tmp_buf) |
| 289 | { |
| 290 | const char *name = of_get_property(dp, "name", NULL); |
| 291 | struct property *prop; |
| 292 | u32 *regs; |
| 293 | |
| 294 | prop = of_find_property(dp, "reg", NULL); |
| 295 | if (!prop) |
| 296 | return; |
| 297 | |
| 298 | regs = prop->value; |
| 299 | |
| 300 | if (regs[2] || regs[3]) { |
| 301 | sprintf(tmp_buf, "%s@%08x%08x,%04x%08x", |
| 302 | name, regs[0], regs[1], regs[2], regs[3]); |
| 303 | } else { |
| 304 | sprintf(tmp_buf, "%s@%08x%08x", |
| 305 | name, regs[0], regs[1]); |
| 306 | } |
| 307 | } |
| 308 | |
| 309 | static void __init __build_path_component(struct device_node *dp, char *tmp_buf) |
| 310 | { |
| 311 | struct device_node *parent = dp->parent; |
| 312 | |
| 313 | if (parent != NULL) { |
| 314 | if (of_node_is_type(parent, "pci") || |
| 315 | of_node_is_type(parent, "pciex")) { |
| 316 | pci_path_component(dp, tmp_buf); |
| 317 | return; |
| 318 | } |
| 319 | if (of_node_is_type(parent, "sbus")) { |
| 320 | sbus_path_component(dp, tmp_buf); |
| 321 | return; |
| 322 | } |
| 323 | if (of_node_is_type(parent, "upa")) { |
| 324 | upa_path_component(dp, tmp_buf); |
| 325 | return; |
| 326 | } |
| 327 | if (of_node_is_type(parent, "ebus")) { |
| 328 | ebus_path_component(dp, tmp_buf); |
| 329 | return; |
| 330 | } |
| 331 | if (of_node_name_eq(parent, "usb") || |
| 332 | of_node_name_eq(parent, "hub")) { |
| 333 | usb_path_component(dp, tmp_buf); |
| 334 | return; |
| 335 | } |
| 336 | if (of_node_is_type(parent, "i2c")) { |
| 337 | i2c_path_component(dp, tmp_buf); |
| 338 | return; |
| 339 | } |
| 340 | if (of_node_is_type(parent, "firewire")) { |
| 341 | ieee1394_path_component(dp, tmp_buf); |
| 342 | return; |
| 343 | } |
| 344 | if (of_node_is_type(parent, "virtual-devices")) { |
| 345 | vdev_path_component(dp, tmp_buf); |
| 346 | return; |
| 347 | } |
| 348 | /* "isa" is handled with platform naming */ |
| 349 | } |
| 350 | |
| 351 | /* Use platform naming convention. */ |
| 352 | if (tlb_type == hypervisor) { |
| 353 | sun4v_path_component(dp, tmp_buf); |
| 354 | return; |
| 355 | } else { |
| 356 | sun4u_path_component(dp, tmp_buf); |
| 357 | } |
| 358 | } |
| 359 | |
| 360 | char * __init build_path_component(struct device_node *dp) |
| 361 | { |
| 362 | const char *name = of_get_property(dp, "name", NULL); |
| 363 | char tmp_buf[64], *n; |
| 364 | |
| 365 | tmp_buf[0] = '\0'; |
| 366 | __build_path_component(dp, tmp_buf); |
| 367 | if (tmp_buf[0] == '\0') |
| 368 | strcpy(tmp_buf, name); |
| 369 | |
| 370 | n = prom_early_alloc(strlen(tmp_buf) + 1); |
| 371 | strcpy(n, tmp_buf); |
| 372 | |
| 373 | return n; |
| 374 | } |
| 375 | |
| 376 | static const char *get_mid_prop(void) |
| 377 | { |
| 378 | return (tlb_type == spitfire ? "upa-portid" : "portid"); |
| 379 | } |
| 380 | |
| 381 | bool arch_find_n_match_cpu_physical_id(struct device_node *cpun, |
| 382 | int cpu, unsigned int *thread) |
| 383 | { |
| 384 | const char *mid_prop = get_mid_prop(); |
| 385 | int this_cpu_id; |
| 386 | |
| 387 | /* On hypervisor based platforms we interrogate the 'reg' |
| 388 | * property. On everything else we look for a 'upa-portid', |
| 389 | * 'portid', or 'cpuid' property. |
| 390 | */ |
| 391 | |
| 392 | if (tlb_type == hypervisor) { |
| 393 | struct property *prop = of_find_property(cpun, "reg", NULL); |
| 394 | u32 *regs; |
| 395 | |
| 396 | if (!prop) { |
| 397 | pr_warn("CPU node missing reg property\n"); |
| 398 | return false; |
| 399 | } |
| 400 | regs = prop->value; |
| 401 | this_cpu_id = regs[0] & 0x0fffffff; |
| 402 | } else { |
| 403 | this_cpu_id = of_getintprop_default(cpun, mid_prop, -1); |
| 404 | |
| 405 | if (this_cpu_id < 0) { |
| 406 | mid_prop = "cpuid"; |
| 407 | this_cpu_id = of_getintprop_default(cpun, mid_prop, -1); |
| 408 | } |
| 409 | if (this_cpu_id < 0) { |
| 410 | pr_warn("CPU node missing cpu ID property\n"); |
| 411 | return false; |
| 412 | } |
| 413 | } |
| 414 | if (this_cpu_id == cpu) { |
| 415 | if (thread) { |
| 416 | int proc_id = cpu_data(cpu).proc_id; |
| 417 | |
| 418 | /* On sparc64, the cpu thread information is obtained |
| 419 | * either from OBP or the machine description. We've |
| 420 | * actually probed this information already long before |
| 421 | * this interface gets called so instead of interrogating |
| 422 | * both the OF node and the MDESC again, just use what |
| 423 | * we discovered already. |
| 424 | */ |
| 425 | if (proc_id < 0) |
| 426 | proc_id = 0; |
| 427 | *thread = proc_id; |
| 428 | } |
| 429 | return true; |
| 430 | } |
| 431 | return false; |
| 432 | } |
| 433 | |
| 434 | static void *of_iterate_over_cpus(void *(*func)(struct device_node *, int, int), int arg) |
| 435 | { |
| 436 | struct device_node *dp; |
| 437 | const char *mid_prop; |
| 438 | |
| 439 | mid_prop = get_mid_prop(); |
| 440 | for_each_node_by_type(dp, "cpu") { |
| 441 | int cpuid = of_getintprop_default(dp, mid_prop, -1); |
| 442 | const char *this_mid_prop = mid_prop; |
| 443 | void *ret; |
| 444 | |
| 445 | if (cpuid < 0) { |
| 446 | this_mid_prop = "cpuid"; |
| 447 | cpuid = of_getintprop_default(dp, this_mid_prop, -1); |
| 448 | } |
| 449 | if (cpuid < 0) { |
| 450 | prom_printf("OF: Serious problem, cpu lacks " |
| 451 | "%s property", this_mid_prop); |
| 452 | prom_halt(); |
| 453 | } |
| 454 | #ifdef CONFIG_SMP |
| 455 | if (cpuid >= NR_CPUS) { |
| 456 | printk(KERN_WARNING "Ignoring CPU %d which is " |
| 457 | ">= NR_CPUS (%d)\n", |
| 458 | cpuid, NR_CPUS); |
| 459 | continue; |
| 460 | } |
| 461 | #endif |
| 462 | ret = func(dp, cpuid, arg); |
| 463 | if (ret) |
| 464 | return ret; |
| 465 | } |
| 466 | return NULL; |
| 467 | } |
| 468 | |
| 469 | static void *check_cpu_node(struct device_node *dp, int cpuid, int id) |
| 470 | { |
| 471 | if (id == cpuid) |
| 472 | return dp; |
| 473 | return NULL; |
| 474 | } |
| 475 | |
| 476 | struct device_node *of_find_node_by_cpuid(int cpuid) |
| 477 | { |
| 478 | return of_iterate_over_cpus(check_cpu_node, cpuid); |
| 479 | } |
| 480 | |
| 481 | static void *record_one_cpu(struct device_node *dp, int cpuid, int arg) |
| 482 | { |
| 483 | ncpus_probed++; |
| 484 | #ifdef CONFIG_SMP |
| 485 | set_cpu_present(cpuid, true); |
| 486 | |
| 487 | if (num_possible_cpus() < nr_cpu_ids) |
| 488 | set_cpu_possible(cpuid, true); |
| 489 | #endif |
| 490 | return NULL; |
| 491 | } |
| 492 | |
| 493 | void __init of_populate_present_mask(void) |
| 494 | { |
| 495 | if (tlb_type == hypervisor) |
| 496 | return; |
| 497 | |
| 498 | ncpus_probed = 0; |
| 499 | of_iterate_over_cpus(record_one_cpu, 0); |
| 500 | } |
| 501 | |
| 502 | static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg) |
| 503 | { |
| 504 | struct device_node *portid_parent = NULL; |
| 505 | int portid = -1; |
| 506 | |
| 507 | if (of_find_property(dp, "cpuid", NULL)) { |
| 508 | int limit = 2; |
| 509 | |
| 510 | portid_parent = dp; |
| 511 | while (limit--) { |
| 512 | portid_parent = portid_parent->parent; |
| 513 | if (!portid_parent) |
| 514 | break; |
| 515 | portid = of_getintprop_default(portid_parent, |
| 516 | "portid", -1); |
| 517 | if (portid >= 0) |
| 518 | break; |
| 519 | } |
| 520 | } |
| 521 | |
| 522 | #ifndef CONFIG_SMP |
| 523 | /* On uniprocessor we only want the values for the |
| 524 | * real physical cpu the kernel booted onto, however |
| 525 | * cpu_data() only has one entry at index 0. |
| 526 | */ |
| 527 | if (cpuid != real_hard_smp_processor_id()) |
| 528 | return NULL; |
| 529 | cpuid = 0; |
| 530 | #endif |
| 531 | |
| 532 | cpu_data(cpuid).clock_tick = |
| 533 | of_getintprop_default(dp, "clock-frequency", 0); |
| 534 | |
| 535 | if (portid_parent) { |
| 536 | cpu_data(cpuid).dcache_size = |
| 537 | of_getintprop_default(dp, "l1-dcache-size", |
| 538 | 16 * 1024); |
| 539 | cpu_data(cpuid).dcache_line_size = |
| 540 | of_getintprop_default(dp, "l1-dcache-line-size", |
| 541 | 32); |
| 542 | cpu_data(cpuid).icache_size = |
| 543 | of_getintprop_default(dp, "l1-icache-size", |
| 544 | 8 * 1024); |
| 545 | cpu_data(cpuid).icache_line_size = |
| 546 | of_getintprop_default(dp, "l1-icache-line-size", |
| 547 | 32); |
| 548 | cpu_data(cpuid).ecache_size = |
| 549 | of_getintprop_default(dp, "l2-cache-size", 0); |
| 550 | cpu_data(cpuid).ecache_line_size = |
| 551 | of_getintprop_default(dp, "l2-cache-line-size", 0); |
| 552 | if (!cpu_data(cpuid).ecache_size || |
| 553 | !cpu_data(cpuid).ecache_line_size) { |
| 554 | cpu_data(cpuid).ecache_size = |
| 555 | of_getintprop_default(portid_parent, |
| 556 | "l2-cache-size", |
| 557 | (4 * 1024 * 1024)); |
| 558 | cpu_data(cpuid).ecache_line_size = |
| 559 | of_getintprop_default(portid_parent, |
| 560 | "l2-cache-line-size", 64); |
| 561 | } |
| 562 | |
| 563 | cpu_data(cpuid).core_id = portid + 1; |
| 564 | cpu_data(cpuid).proc_id = portid; |
| 565 | } else { |
| 566 | cpu_data(cpuid).dcache_size = |
| 567 | of_getintprop_default(dp, "dcache-size", 16 * 1024); |
| 568 | cpu_data(cpuid).dcache_line_size = |
| 569 | of_getintprop_default(dp, "dcache-line-size", 32); |
| 570 | |
| 571 | cpu_data(cpuid).icache_size = |
| 572 | of_getintprop_default(dp, "icache-size", 16 * 1024); |
| 573 | cpu_data(cpuid).icache_line_size = |
| 574 | of_getintprop_default(dp, "icache-line-size", 32); |
| 575 | |
| 576 | cpu_data(cpuid).ecache_size = |
| 577 | of_getintprop_default(dp, "ecache-size", |
| 578 | (4 * 1024 * 1024)); |
| 579 | cpu_data(cpuid).ecache_line_size = |
| 580 | of_getintprop_default(dp, "ecache-line-size", 64); |
| 581 | |
| 582 | cpu_data(cpuid).core_id = 0; |
| 583 | cpu_data(cpuid).proc_id = -1; |
| 584 | } |
| 585 | |
| 586 | return NULL; |
| 587 | } |
| 588 | |
| 589 | void __init of_fill_in_cpu_data(void) |
| 590 | { |
| 591 | if (tlb_type == hypervisor) |
| 592 | return; |
| 593 | |
| 594 | of_iterate_over_cpus(fill_in_one_cpu, 0); |
| 595 | |
| 596 | smp_fill_in_sib_core_maps(); |
| 597 | } |
| 598 | |
| 599 | void __init of_console_init(void) |
| 600 | { |
| 601 | char *msg = "OF stdout device is: %s\n"; |
| 602 | struct device_node *dp; |
| 603 | phandle node; |
| 604 | |
| 605 | of_console_path = prom_early_alloc(256); |
| 606 | if (prom_ihandle2path(prom_stdout, of_console_path, 256) < 0) { |
| 607 | prom_printf("Cannot obtain path of stdout.\n"); |
| 608 | prom_halt(); |
| 609 | } |
| 610 | of_console_options = strrchr(of_console_path, ':'); |
| 611 | if (of_console_options) { |
| 612 | of_console_options++; |
| 613 | if (*of_console_options == '\0') |
| 614 | of_console_options = NULL; |
| 615 | } |
| 616 | |
| 617 | node = prom_inst2pkg(prom_stdout); |
| 618 | if (!node) { |
| 619 | prom_printf("Cannot resolve stdout node from " |
| 620 | "instance %08x.\n", prom_stdout); |
| 621 | prom_halt(); |
| 622 | } |
| 623 | |
| 624 | dp = of_find_node_by_phandle(node); |
| 625 | |
| 626 | if (!of_node_is_type(dp, "display") && !of_node_is_type(dp, "serial")) { |
| 627 | prom_printf("Console device_type is neither display " |
| 628 | "nor serial.\n"); |
| 629 | prom_halt(); |
| 630 | } |
| 631 | |
| 632 | of_console_device = dp; |
| 633 | |
| 634 | printk(msg, of_console_path); |
| 635 | } |