b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Copyright (C) 2012 Texas Instruments |
| 4 | * Author: Rob Clark <robdclark@gmail.com> |
| 5 | */ |
| 6 | |
| 7 | #include <linux/delay.h> |
| 8 | #include <linux/dma-mapping.h> |
| 9 | #include <linux/of_graph.h> |
| 10 | #include <linux/pm_runtime.h> |
| 11 | |
| 12 | #include <drm/drm_atomic.h> |
| 13 | #include <drm/drm_atomic_helper.h> |
| 14 | #include <drm/drm_crtc.h> |
| 15 | #include <drm/drm_fb_cma_helper.h> |
| 16 | #include <drm/drm_fourcc.h> |
| 17 | #include <drm/drm_gem_cma_helper.h> |
| 18 | #include <drm/drm_modeset_helper_vtables.h> |
| 19 | #include <drm/drm_print.h> |
| 20 | #include <drm/drm_vblank.h> |
| 21 | |
| 22 | #include "tilcdc_drv.h" |
| 23 | #include "tilcdc_regs.h" |
| 24 | |
| 25 | #define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 |
| 26 | #define TILCDC_PALETTE_SIZE 32 |
| 27 | #define TILCDC_PALETTE_FIRST_ENTRY 0x4000 |
| 28 | |
| 29 | struct tilcdc_crtc { |
| 30 | struct drm_crtc base; |
| 31 | |
| 32 | struct drm_plane primary; |
| 33 | const struct tilcdc_panel_info *info; |
| 34 | struct drm_pending_vblank_event *event; |
| 35 | struct mutex enable_lock; |
| 36 | bool enabled; |
| 37 | bool shutdown; |
| 38 | wait_queue_head_t frame_done_wq; |
| 39 | bool frame_done; |
| 40 | spinlock_t irq_lock; |
| 41 | |
| 42 | unsigned int lcd_fck_rate; |
| 43 | |
| 44 | ktime_t last_vblank; |
| 45 | unsigned int hvtotal_us; |
| 46 | |
| 47 | struct drm_framebuffer *next_fb; |
| 48 | |
| 49 | /* Only set if an external encoder is connected */ |
| 50 | bool simulate_vesa_sync; |
| 51 | |
| 52 | int sync_lost_count; |
| 53 | bool frame_intact; |
| 54 | struct work_struct recover_work; |
| 55 | |
| 56 | dma_addr_t palette_dma_handle; |
| 57 | u16 *palette_base; |
| 58 | struct completion palette_loaded; |
| 59 | }; |
| 60 | #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) |
| 61 | |
| 62 | static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) |
| 63 | { |
| 64 | struct drm_device *dev = crtc->dev; |
| 65 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 66 | struct drm_gem_cma_object *gem; |
| 67 | dma_addr_t start, end; |
| 68 | u64 dma_base_and_ceiling; |
| 69 | |
| 70 | gem = drm_fb_cma_get_gem_obj(fb, 0); |
| 71 | |
| 72 | start = gem->paddr + fb->offsets[0] + |
| 73 | crtc->y * fb->pitches[0] + |
| 74 | crtc->x * fb->format->cpp[0]; |
| 75 | |
| 76 | end = start + (crtc->mode.vdisplay * fb->pitches[0]); |
| 77 | |
| 78 | /* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG |
| 79 | * with a single insruction, if available. This should make it more |
| 80 | * unlikely that LCDC would fetch the DMA addresses in the middle of |
| 81 | * an update. |
| 82 | */ |
| 83 | if (priv->rev == 1) |
| 84 | end -= 1; |
| 85 | |
| 86 | dma_base_and_ceiling = (u64)end << 32 | start; |
| 87 | tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling); |
| 88 | } |
| 89 | |
| 90 | /* |
| 91 | * The driver currently only supports only true color formats. For |
| 92 | * true color the palette block is bypassed, but a 32 byte palette |
| 93 | * should still be loaded. The first 16-bit entry must be 0x4000 while |
| 94 | * all other entries must be zeroed. |
| 95 | */ |
| 96 | static void tilcdc_crtc_load_palette(struct drm_crtc *crtc) |
| 97 | { |
| 98 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 99 | struct drm_device *dev = crtc->dev; |
| 100 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 101 | int ret; |
| 102 | |
| 103 | reinit_completion(&tilcdc_crtc->palette_loaded); |
| 104 | |
| 105 | /* Tell the LCDC where the palette is located. */ |
| 106 | tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, |
| 107 | tilcdc_crtc->palette_dma_handle); |
| 108 | tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, |
| 109 | (u32) tilcdc_crtc->palette_dma_handle + |
| 110 | TILCDC_PALETTE_SIZE - 1); |
| 111 | |
| 112 | /* Set dma load mode for palette loading only. */ |
| 113 | tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG, |
| 114 | LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY), |
| 115 | LCDC_PALETTE_LOAD_MODE_MASK); |
| 116 | |
| 117 | /* Enable DMA Palette Loaded Interrupt */ |
| 118 | if (priv->rev == 1) |
| 119 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA); |
| 120 | else |
| 121 | tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA); |
| 122 | |
| 123 | /* Enable LCDC DMA and wait for palette to be loaded. */ |
| 124 | tilcdc_clear_irqstatus(dev, 0xffffffff); |
| 125 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| 126 | |
| 127 | ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded, |
| 128 | msecs_to_jiffies(50)); |
| 129 | if (ret == 0) |
| 130 | dev_err(dev->dev, "%s: Palette loading timeout", __func__); |
| 131 | |
| 132 | /* Disable LCDC DMA and DMA Palette Loaded Interrupt. */ |
| 133 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| 134 | if (priv->rev == 1) |
| 135 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA); |
| 136 | else |
| 137 | tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA); |
| 138 | } |
| 139 | |
| 140 | static void tilcdc_crtc_enable_irqs(struct drm_device *dev) |
| 141 | { |
| 142 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 143 | |
| 144 | tilcdc_clear_irqstatus(dev, 0xffffffff); |
| 145 | |
| 146 | if (priv->rev == 1) { |
| 147 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, |
| 148 | LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA | |
| 149 | LCDC_V1_UNDERFLOW_INT_ENA); |
| 150 | tilcdc_set(dev, LCDC_DMA_CTRL_REG, |
| 151 | LCDC_V1_END_OF_FRAME_INT_ENA); |
| 152 | } else { |
| 153 | tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, |
| 154 | LCDC_V2_UNDERFLOW_INT_ENA | |
| 155 | LCDC_V2_END_OF_FRAME0_INT_ENA | |
| 156 | LCDC_FRAME_DONE | LCDC_SYNC_LOST); |
| 157 | } |
| 158 | } |
| 159 | |
| 160 | static void tilcdc_crtc_disable_irqs(struct drm_device *dev) |
| 161 | { |
| 162 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 163 | |
| 164 | /* disable irqs that we might have enabled: */ |
| 165 | if (priv->rev == 1) { |
| 166 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, |
| 167 | LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA | |
| 168 | LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA); |
| 169 | tilcdc_clear(dev, LCDC_DMA_CTRL_REG, |
| 170 | LCDC_V1_END_OF_FRAME_INT_ENA); |
| 171 | } else { |
| 172 | tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, |
| 173 | LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | |
| 174 | LCDC_V2_END_OF_FRAME0_INT_ENA | |
| 175 | LCDC_FRAME_DONE | LCDC_SYNC_LOST); |
| 176 | } |
| 177 | } |
| 178 | |
| 179 | static void reset(struct drm_crtc *crtc) |
| 180 | { |
| 181 | struct drm_device *dev = crtc->dev; |
| 182 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 183 | |
| 184 | if (priv->rev != 2) |
| 185 | return; |
| 186 | |
| 187 | tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); |
| 188 | usleep_range(250, 1000); |
| 189 | tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); |
| 190 | } |
| 191 | |
| 192 | /* |
| 193 | * Calculate the percentage difference between the requested pixel clock rate |
| 194 | * and the effective rate resulting from calculating the clock divider value. |
| 195 | */ |
| 196 | static unsigned int tilcdc_pclk_diff(unsigned long rate, |
| 197 | unsigned long real_rate) |
| 198 | { |
| 199 | int r = rate / 100, rr = real_rate / 100; |
| 200 | |
| 201 | return (unsigned int)(abs(((rr - r) * 100) / r)); |
| 202 | } |
| 203 | |
| 204 | static void tilcdc_crtc_set_clk(struct drm_crtc *crtc) |
| 205 | { |
| 206 | struct drm_device *dev = crtc->dev; |
| 207 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 208 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 209 | unsigned long clk_rate, real_rate, req_rate; |
| 210 | unsigned int clkdiv; |
| 211 | int ret; |
| 212 | |
| 213 | clkdiv = 2; /* first try using a standard divider of 2 */ |
| 214 | |
| 215 | /* mode.clock is in KHz, set_rate wants parameter in Hz */ |
| 216 | req_rate = crtc->mode.clock * 1000; |
| 217 | |
| 218 | ret = clk_set_rate(priv->clk, req_rate * clkdiv); |
| 219 | clk_rate = clk_get_rate(priv->clk); |
| 220 | if (ret < 0 || tilcdc_pclk_diff(req_rate, clk_rate) > 5) { |
| 221 | /* |
| 222 | * If we fail to set the clock rate (some architectures don't |
| 223 | * use the common clock framework yet and may not implement |
| 224 | * all the clk API calls for every clock), try the next best |
| 225 | * thing: adjusting the clock divider, unless clk_get_rate() |
| 226 | * failed as well. |
| 227 | */ |
| 228 | if (!clk_rate) { |
| 229 | /* Nothing more we can do. Just bail out. */ |
| 230 | dev_err(dev->dev, |
| 231 | "failed to set the pixel clock - unable to read current lcdc clock rate\n"); |
| 232 | return; |
| 233 | } |
| 234 | |
| 235 | clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate); |
| 236 | |
| 237 | /* |
| 238 | * Emit a warning if the real clock rate resulting from the |
| 239 | * calculated divider differs much from the requested rate. |
| 240 | * |
| 241 | * 5% is an arbitrary value - LCDs are usually quite tolerant |
| 242 | * about pixel clock rates. |
| 243 | */ |
| 244 | real_rate = clkdiv * req_rate; |
| 245 | |
| 246 | if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) { |
| 247 | dev_warn(dev->dev, |
| 248 | "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n", |
| 249 | clk_rate, real_rate); |
| 250 | } |
| 251 | } |
| 252 | |
| 253 | tilcdc_crtc->lcd_fck_rate = clk_rate; |
| 254 | |
| 255 | DBG("lcd_clk=%u, mode clock=%d, div=%u", |
| 256 | tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv); |
| 257 | |
| 258 | /* Configure the LCD clock divisor. */ |
| 259 | tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) | |
| 260 | LCDC_RASTER_MODE); |
| 261 | |
| 262 | if (priv->rev == 2) |
| 263 | tilcdc_set(dev, LCDC_CLK_ENABLE_REG, |
| 264 | LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN | |
| 265 | LCDC_V2_CORE_CLK_EN); |
| 266 | } |
| 267 | |
| 268 | static uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode) |
| 269 | { |
| 270 | return (uint) div_u64(1000llu * mode->htotal * mode->vtotal, |
| 271 | mode->clock); |
| 272 | } |
| 273 | |
| 274 | static void tilcdc_crtc_set_mode(struct drm_crtc *crtc) |
| 275 | { |
| 276 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 277 | struct drm_device *dev = crtc->dev; |
| 278 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 279 | const struct tilcdc_panel_info *info = tilcdc_crtc->info; |
| 280 | uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw; |
| 281 | struct drm_display_mode *mode = &crtc->state->adjusted_mode; |
| 282 | struct drm_framebuffer *fb = crtc->primary->state->fb; |
| 283 | |
| 284 | if (WARN_ON(!info)) |
| 285 | return; |
| 286 | |
| 287 | if (WARN_ON(!fb)) |
| 288 | return; |
| 289 | |
| 290 | /* Configure the Burst Size and fifo threshold of DMA: */ |
| 291 | reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770; |
| 292 | switch (info->dma_burst_sz) { |
| 293 | case 1: |
| 294 | reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1); |
| 295 | break; |
| 296 | case 2: |
| 297 | reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2); |
| 298 | break; |
| 299 | case 4: |
| 300 | reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4); |
| 301 | break; |
| 302 | case 8: |
| 303 | reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8); |
| 304 | break; |
| 305 | case 16: |
| 306 | reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16); |
| 307 | break; |
| 308 | default: |
| 309 | dev_err(dev->dev, "invalid burst size\n"); |
| 310 | return; |
| 311 | } |
| 312 | reg |= (info->fifo_th << 8); |
| 313 | tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg); |
| 314 | |
| 315 | /* Configure timings: */ |
| 316 | hbp = mode->htotal - mode->hsync_end; |
| 317 | hfp = mode->hsync_start - mode->hdisplay; |
| 318 | hsw = mode->hsync_end - mode->hsync_start; |
| 319 | vbp = mode->vtotal - mode->vsync_end; |
| 320 | vfp = mode->vsync_start - mode->vdisplay; |
| 321 | vsw = mode->vsync_end - mode->vsync_start; |
| 322 | |
| 323 | DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u", |
| 324 | mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw); |
| 325 | |
| 326 | /* Set AC Bias Period and Number of Transitions per Interrupt: */ |
| 327 | reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00; |
| 328 | reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) | |
| 329 | LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt); |
| 330 | |
| 331 | /* |
| 332 | * subtract one from hfp, hbp, hsw because the hardware uses |
| 333 | * a value of 0 as 1 |
| 334 | */ |
| 335 | if (priv->rev == 2) { |
| 336 | /* clear bits we're going to set */ |
| 337 | reg &= ~0x78000033; |
| 338 | reg |= ((hfp-1) & 0x300) >> 8; |
| 339 | reg |= ((hbp-1) & 0x300) >> 4; |
| 340 | reg |= ((hsw-1) & 0x3c0) << 21; |
| 341 | } |
| 342 | tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg); |
| 343 | |
| 344 | reg = (((mode->hdisplay >> 4) - 1) << 4) | |
| 345 | (((hbp-1) & 0xff) << 24) | |
| 346 | (((hfp-1) & 0xff) << 16) | |
| 347 | (((hsw-1) & 0x3f) << 10); |
| 348 | if (priv->rev == 2) |
| 349 | reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3; |
| 350 | tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg); |
| 351 | |
| 352 | reg = ((mode->vdisplay - 1) & 0x3ff) | |
| 353 | ((vbp & 0xff) << 24) | |
| 354 | ((vfp & 0xff) << 16) | |
| 355 | (((vsw-1) & 0x3f) << 10); |
| 356 | tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg); |
| 357 | |
| 358 | /* |
| 359 | * be sure to set Bit 10 for the V2 LCDC controller, |
| 360 | * otherwise limited to 1024 pixels width, stopping |
| 361 | * 1920x1080 being supported. |
| 362 | */ |
| 363 | if (priv->rev == 2) { |
| 364 | if ((mode->vdisplay - 1) & 0x400) { |
| 365 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, |
| 366 | LCDC_LPP_B10); |
| 367 | } else { |
| 368 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, |
| 369 | LCDC_LPP_B10); |
| 370 | } |
| 371 | } |
| 372 | |
| 373 | /* Configure display type: */ |
| 374 | reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & |
| 375 | ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE | |
| 376 | LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | |
| 377 | 0x000ff000 /* Palette Loading Delay bits */); |
| 378 | reg |= LCDC_TFT_MODE; /* no monochrome/passive support */ |
| 379 | if (info->tft_alt_mode) |
| 380 | reg |= LCDC_TFT_ALT_ENABLE; |
| 381 | if (priv->rev == 2) { |
| 382 | switch (fb->format->format) { |
| 383 | case DRM_FORMAT_BGR565: |
| 384 | case DRM_FORMAT_RGB565: |
| 385 | break; |
| 386 | case DRM_FORMAT_XBGR8888: |
| 387 | case DRM_FORMAT_XRGB8888: |
| 388 | reg |= LCDC_V2_TFT_24BPP_UNPACK; |
| 389 | /* fallthrough */ |
| 390 | case DRM_FORMAT_BGR888: |
| 391 | case DRM_FORMAT_RGB888: |
| 392 | reg |= LCDC_V2_TFT_24BPP_MODE; |
| 393 | break; |
| 394 | default: |
| 395 | dev_err(dev->dev, "invalid pixel format\n"); |
| 396 | return; |
| 397 | } |
| 398 | } |
| 399 | reg |= info->fdd < 12; |
| 400 | tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg); |
| 401 | |
| 402 | if (info->invert_pxl_clk) |
| 403 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); |
| 404 | else |
| 405 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); |
| 406 | |
| 407 | if (info->sync_ctrl) |
| 408 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); |
| 409 | else |
| 410 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); |
| 411 | |
| 412 | if (info->sync_edge) |
| 413 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); |
| 414 | else |
| 415 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); |
| 416 | |
| 417 | if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| 418 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); |
| 419 | else |
| 420 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); |
| 421 | |
| 422 | if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| 423 | tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); |
| 424 | else |
| 425 | tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); |
| 426 | |
| 427 | if (info->raster_order) |
| 428 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); |
| 429 | else |
| 430 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); |
| 431 | |
| 432 | tilcdc_crtc_set_clk(crtc); |
| 433 | |
| 434 | tilcdc_crtc_load_palette(crtc); |
| 435 | |
| 436 | set_scanout(crtc, fb); |
| 437 | |
| 438 | crtc->hwmode = crtc->state->adjusted_mode; |
| 439 | |
| 440 | tilcdc_crtc->hvtotal_us = |
| 441 | tilcdc_mode_hvtotal(&crtc->hwmode); |
| 442 | } |
| 443 | |
| 444 | static void tilcdc_crtc_enable(struct drm_crtc *crtc) |
| 445 | { |
| 446 | struct drm_device *dev = crtc->dev; |
| 447 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 448 | unsigned long flags; |
| 449 | |
| 450 | mutex_lock(&tilcdc_crtc->enable_lock); |
| 451 | if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) { |
| 452 | mutex_unlock(&tilcdc_crtc->enable_lock); |
| 453 | return; |
| 454 | } |
| 455 | |
| 456 | pm_runtime_get_sync(dev->dev); |
| 457 | |
| 458 | reset(crtc); |
| 459 | |
| 460 | tilcdc_crtc_set_mode(crtc); |
| 461 | |
| 462 | tilcdc_crtc_enable_irqs(dev); |
| 463 | |
| 464 | tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); |
| 465 | tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG, |
| 466 | LCDC_PALETTE_LOAD_MODE(DATA_ONLY), |
| 467 | LCDC_PALETTE_LOAD_MODE_MASK); |
| 468 | |
| 469 | /* There is no real chance for a race here as the time stamp |
| 470 | * is taken before the raster DMA is started. The spin-lock is |
| 471 | * taken to have a memory barrier after taking the time-stamp |
| 472 | * and to avoid a context switch between taking the stamp and |
| 473 | * enabling the raster. |
| 474 | */ |
| 475 | spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); |
| 476 | tilcdc_crtc->last_vblank = ktime_get(); |
| 477 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| 478 | spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); |
| 479 | |
| 480 | drm_crtc_vblank_on(crtc); |
| 481 | |
| 482 | tilcdc_crtc->enabled = true; |
| 483 | mutex_unlock(&tilcdc_crtc->enable_lock); |
| 484 | } |
| 485 | |
| 486 | static void tilcdc_crtc_atomic_enable(struct drm_crtc *crtc, |
| 487 | struct drm_crtc_state *old_state) |
| 488 | { |
| 489 | tilcdc_crtc_enable(crtc); |
| 490 | } |
| 491 | |
| 492 | static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown) |
| 493 | { |
| 494 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 495 | struct drm_device *dev = crtc->dev; |
| 496 | int ret; |
| 497 | |
| 498 | mutex_lock(&tilcdc_crtc->enable_lock); |
| 499 | if (shutdown) |
| 500 | tilcdc_crtc->shutdown = true; |
| 501 | if (!tilcdc_crtc->enabled) { |
| 502 | mutex_unlock(&tilcdc_crtc->enable_lock); |
| 503 | return; |
| 504 | } |
| 505 | tilcdc_crtc->frame_done = false; |
| 506 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| 507 | |
| 508 | /* |
| 509 | * Wait for framedone irq which will still come before putting |
| 510 | * things to sleep.. |
| 511 | */ |
| 512 | ret = wait_event_timeout(tilcdc_crtc->frame_done_wq, |
| 513 | tilcdc_crtc->frame_done, |
| 514 | msecs_to_jiffies(500)); |
| 515 | if (ret == 0) |
| 516 | dev_err(dev->dev, "%s: timeout waiting for framedone\n", |
| 517 | __func__); |
| 518 | |
| 519 | drm_crtc_vblank_off(crtc); |
| 520 | |
| 521 | tilcdc_crtc_disable_irqs(dev); |
| 522 | |
| 523 | pm_runtime_put_sync(dev->dev); |
| 524 | |
| 525 | tilcdc_crtc->enabled = false; |
| 526 | mutex_unlock(&tilcdc_crtc->enable_lock); |
| 527 | } |
| 528 | |
| 529 | static void tilcdc_crtc_disable(struct drm_crtc *crtc) |
| 530 | { |
| 531 | tilcdc_crtc_off(crtc, false); |
| 532 | } |
| 533 | |
| 534 | static void tilcdc_crtc_atomic_disable(struct drm_crtc *crtc, |
| 535 | struct drm_crtc_state *old_state) |
| 536 | { |
| 537 | tilcdc_crtc_disable(crtc); |
| 538 | } |
| 539 | |
| 540 | void tilcdc_crtc_shutdown(struct drm_crtc *crtc) |
| 541 | { |
| 542 | tilcdc_crtc_off(crtc, true); |
| 543 | } |
| 544 | |
| 545 | static bool tilcdc_crtc_is_on(struct drm_crtc *crtc) |
| 546 | { |
| 547 | return crtc->state && crtc->state->enable && crtc->state->active; |
| 548 | } |
| 549 | |
| 550 | static void tilcdc_crtc_recover_work(struct work_struct *work) |
| 551 | { |
| 552 | struct tilcdc_crtc *tilcdc_crtc = |
| 553 | container_of(work, struct tilcdc_crtc, recover_work); |
| 554 | struct drm_crtc *crtc = &tilcdc_crtc->base; |
| 555 | |
| 556 | dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__); |
| 557 | |
| 558 | drm_modeset_lock(&crtc->mutex, NULL); |
| 559 | |
| 560 | if (!tilcdc_crtc_is_on(crtc)) |
| 561 | goto out; |
| 562 | |
| 563 | tilcdc_crtc_disable(crtc); |
| 564 | tilcdc_crtc_enable(crtc); |
| 565 | out: |
| 566 | drm_modeset_unlock(&crtc->mutex); |
| 567 | } |
| 568 | |
| 569 | static void tilcdc_crtc_destroy(struct drm_crtc *crtc) |
| 570 | { |
| 571 | struct tilcdc_drm_private *priv = crtc->dev->dev_private; |
| 572 | |
| 573 | tilcdc_crtc_shutdown(crtc); |
| 574 | |
| 575 | flush_workqueue(priv->wq); |
| 576 | |
| 577 | of_node_put(crtc->port); |
| 578 | drm_crtc_cleanup(crtc); |
| 579 | } |
| 580 | |
| 581 | int tilcdc_crtc_update_fb(struct drm_crtc *crtc, |
| 582 | struct drm_framebuffer *fb, |
| 583 | struct drm_pending_vblank_event *event) |
| 584 | { |
| 585 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 586 | struct drm_device *dev = crtc->dev; |
| 587 | |
| 588 | if (tilcdc_crtc->event) { |
| 589 | dev_err(dev->dev, "already pending page flip!\n"); |
| 590 | return -EBUSY; |
| 591 | } |
| 592 | |
| 593 | tilcdc_crtc->event = event; |
| 594 | |
| 595 | mutex_lock(&tilcdc_crtc->enable_lock); |
| 596 | |
| 597 | if (tilcdc_crtc->enabled) { |
| 598 | unsigned long flags; |
| 599 | ktime_t next_vblank; |
| 600 | s64 tdiff; |
| 601 | |
| 602 | spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); |
| 603 | |
| 604 | next_vblank = ktime_add_us(tilcdc_crtc->last_vblank, |
| 605 | tilcdc_crtc->hvtotal_us); |
| 606 | tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get())); |
| 607 | |
| 608 | if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US) |
| 609 | tilcdc_crtc->next_fb = fb; |
| 610 | else |
| 611 | set_scanout(crtc, fb); |
| 612 | |
| 613 | spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); |
| 614 | } |
| 615 | |
| 616 | mutex_unlock(&tilcdc_crtc->enable_lock); |
| 617 | |
| 618 | return 0; |
| 619 | } |
| 620 | |
| 621 | static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc, |
| 622 | const struct drm_display_mode *mode, |
| 623 | struct drm_display_mode *adjusted_mode) |
| 624 | { |
| 625 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 626 | |
| 627 | if (!tilcdc_crtc->simulate_vesa_sync) |
| 628 | return true; |
| 629 | |
| 630 | /* |
| 631 | * tilcdc does not generate VESA-compliant sync but aligns |
| 632 | * VS on the second edge of HS instead of first edge. |
| 633 | * We use adjusted_mode, to fixup sync by aligning both rising |
| 634 | * edges and add HSKEW offset to fix the sync. |
| 635 | */ |
| 636 | adjusted_mode->hskew = mode->hsync_end - mode->hsync_start; |
| 637 | adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW; |
| 638 | |
| 639 | if (mode->flags & DRM_MODE_FLAG_NHSYNC) { |
| 640 | adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| 641 | adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC; |
| 642 | } else { |
| 643 | adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC; |
| 644 | adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC; |
| 645 | } |
| 646 | |
| 647 | return true; |
| 648 | } |
| 649 | |
| 650 | static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc, |
| 651 | struct drm_crtc_state *state) |
| 652 | { |
| 653 | /* If we are not active we don't care */ |
| 654 | if (!state->active) |
| 655 | return 0; |
| 656 | |
| 657 | if (state->state->planes[0].ptr != crtc->primary || |
| 658 | state->state->planes[0].state == NULL || |
| 659 | state->state->planes[0].state->crtc != crtc) { |
| 660 | dev_dbg(crtc->dev->dev, "CRTC primary plane must be present"); |
| 661 | return -EINVAL; |
| 662 | } |
| 663 | |
| 664 | return 0; |
| 665 | } |
| 666 | |
| 667 | static int tilcdc_crtc_enable_vblank(struct drm_crtc *crtc) |
| 668 | { |
| 669 | return 0; |
| 670 | } |
| 671 | |
| 672 | static void tilcdc_crtc_disable_vblank(struct drm_crtc *crtc) |
| 673 | { |
| 674 | } |
| 675 | |
| 676 | static void tilcdc_crtc_reset(struct drm_crtc *crtc) |
| 677 | { |
| 678 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 679 | struct drm_device *dev = crtc->dev; |
| 680 | int ret; |
| 681 | |
| 682 | drm_atomic_helper_crtc_reset(crtc); |
| 683 | |
| 684 | /* Turn the raster off if it for some reason is on. */ |
| 685 | pm_runtime_get_sync(dev->dev); |
| 686 | if (tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & LCDC_RASTER_ENABLE) { |
| 687 | /* Enable DMA Frame Done Interrupt */ |
| 688 | tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_FRAME_DONE); |
| 689 | tilcdc_clear_irqstatus(dev, 0xffffffff); |
| 690 | |
| 691 | tilcdc_crtc->frame_done = false; |
| 692 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); |
| 693 | |
| 694 | ret = wait_event_timeout(tilcdc_crtc->frame_done_wq, |
| 695 | tilcdc_crtc->frame_done, |
| 696 | msecs_to_jiffies(500)); |
| 697 | if (ret == 0) |
| 698 | dev_err(dev->dev, "%s: timeout waiting for framedone\n", |
| 699 | __func__); |
| 700 | } |
| 701 | pm_runtime_put_sync(dev->dev); |
| 702 | } |
| 703 | |
| 704 | static const struct drm_crtc_funcs tilcdc_crtc_funcs = { |
| 705 | .destroy = tilcdc_crtc_destroy, |
| 706 | .set_config = drm_atomic_helper_set_config, |
| 707 | .page_flip = drm_atomic_helper_page_flip, |
| 708 | .reset = tilcdc_crtc_reset, |
| 709 | .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| 710 | .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| 711 | .enable_vblank = tilcdc_crtc_enable_vblank, |
| 712 | .disable_vblank = tilcdc_crtc_disable_vblank, |
| 713 | }; |
| 714 | |
| 715 | int tilcdc_crtc_max_width(struct drm_crtc *crtc) |
| 716 | { |
| 717 | struct drm_device *dev = crtc->dev; |
| 718 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 719 | int max_width = 0; |
| 720 | |
| 721 | if (priv->rev == 1) |
| 722 | max_width = 1024; |
| 723 | else if (priv->rev == 2) |
| 724 | max_width = 2048; |
| 725 | |
| 726 | return max_width; |
| 727 | } |
| 728 | |
| 729 | static enum drm_mode_status |
| 730 | tilcdc_crtc_mode_valid(struct drm_crtc *crtc, |
| 731 | const struct drm_display_mode *mode) |
| 732 | { |
| 733 | struct tilcdc_drm_private *priv = crtc->dev->dev_private; |
| 734 | unsigned int bandwidth; |
| 735 | uint32_t hbp, hfp, hsw, vbp, vfp, vsw; |
| 736 | |
| 737 | /* |
| 738 | * check to see if the width is within the range that |
| 739 | * the LCD Controller physically supports |
| 740 | */ |
| 741 | if (mode->hdisplay > tilcdc_crtc_max_width(crtc)) |
| 742 | return MODE_VIRTUAL_X; |
| 743 | |
| 744 | /* width must be multiple of 16 */ |
| 745 | if (mode->hdisplay & 0xf) |
| 746 | return MODE_VIRTUAL_X; |
| 747 | |
| 748 | if (mode->vdisplay > 2048) |
| 749 | return MODE_VIRTUAL_Y; |
| 750 | |
| 751 | DBG("Processing mode %dx%d@%d with pixel clock %d", |
| 752 | mode->hdisplay, mode->vdisplay, |
| 753 | drm_mode_vrefresh(mode), mode->clock); |
| 754 | |
| 755 | hbp = mode->htotal - mode->hsync_end; |
| 756 | hfp = mode->hsync_start - mode->hdisplay; |
| 757 | hsw = mode->hsync_end - mode->hsync_start; |
| 758 | vbp = mode->vtotal - mode->vsync_end; |
| 759 | vfp = mode->vsync_start - mode->vdisplay; |
| 760 | vsw = mode->vsync_end - mode->vsync_start; |
| 761 | |
| 762 | if ((hbp-1) & ~0x3ff) { |
| 763 | DBG("Pruning mode: Horizontal Back Porch out of range"); |
| 764 | return MODE_HBLANK_WIDE; |
| 765 | } |
| 766 | |
| 767 | if ((hfp-1) & ~0x3ff) { |
| 768 | DBG("Pruning mode: Horizontal Front Porch out of range"); |
| 769 | return MODE_HBLANK_WIDE; |
| 770 | } |
| 771 | |
| 772 | if ((hsw-1) & ~0x3ff) { |
| 773 | DBG("Pruning mode: Horizontal Sync Width out of range"); |
| 774 | return MODE_HSYNC_WIDE; |
| 775 | } |
| 776 | |
| 777 | if (vbp & ~0xff) { |
| 778 | DBG("Pruning mode: Vertical Back Porch out of range"); |
| 779 | return MODE_VBLANK_WIDE; |
| 780 | } |
| 781 | |
| 782 | if (vfp & ~0xff) { |
| 783 | DBG("Pruning mode: Vertical Front Porch out of range"); |
| 784 | return MODE_VBLANK_WIDE; |
| 785 | } |
| 786 | |
| 787 | if ((vsw-1) & ~0x3f) { |
| 788 | DBG("Pruning mode: Vertical Sync Width out of range"); |
| 789 | return MODE_VSYNC_WIDE; |
| 790 | } |
| 791 | |
| 792 | /* |
| 793 | * some devices have a maximum allowed pixel clock |
| 794 | * configured from the DT |
| 795 | */ |
| 796 | if (mode->clock > priv->max_pixelclock) { |
| 797 | DBG("Pruning mode: pixel clock too high"); |
| 798 | return MODE_CLOCK_HIGH; |
| 799 | } |
| 800 | |
| 801 | /* |
| 802 | * some devices further limit the max horizontal resolution |
| 803 | * configured from the DT |
| 804 | */ |
| 805 | if (mode->hdisplay > priv->max_width) |
| 806 | return MODE_BAD_WIDTH; |
| 807 | |
| 808 | /* filter out modes that would require too much memory bandwidth: */ |
| 809 | bandwidth = mode->hdisplay * mode->vdisplay * |
| 810 | drm_mode_vrefresh(mode); |
| 811 | if (bandwidth > priv->max_bandwidth) { |
| 812 | DBG("Pruning mode: exceeds defined bandwidth limit"); |
| 813 | return MODE_BAD; |
| 814 | } |
| 815 | |
| 816 | return MODE_OK; |
| 817 | } |
| 818 | |
| 819 | static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = { |
| 820 | .mode_valid = tilcdc_crtc_mode_valid, |
| 821 | .mode_fixup = tilcdc_crtc_mode_fixup, |
| 822 | .atomic_check = tilcdc_crtc_atomic_check, |
| 823 | .atomic_enable = tilcdc_crtc_atomic_enable, |
| 824 | .atomic_disable = tilcdc_crtc_atomic_disable, |
| 825 | }; |
| 826 | |
| 827 | void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, |
| 828 | const struct tilcdc_panel_info *info) |
| 829 | { |
| 830 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 831 | tilcdc_crtc->info = info; |
| 832 | } |
| 833 | |
| 834 | void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, |
| 835 | bool simulate_vesa_sync) |
| 836 | { |
| 837 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 838 | |
| 839 | tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync; |
| 840 | } |
| 841 | |
| 842 | void tilcdc_crtc_update_clk(struct drm_crtc *crtc) |
| 843 | { |
| 844 | struct drm_device *dev = crtc->dev; |
| 845 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 846 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 847 | |
| 848 | drm_modeset_lock(&crtc->mutex, NULL); |
| 849 | if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) { |
| 850 | if (tilcdc_crtc_is_on(crtc)) { |
| 851 | pm_runtime_get_sync(dev->dev); |
| 852 | tilcdc_crtc_disable(crtc); |
| 853 | |
| 854 | tilcdc_crtc_set_clk(crtc); |
| 855 | |
| 856 | tilcdc_crtc_enable(crtc); |
| 857 | pm_runtime_put_sync(dev->dev); |
| 858 | } |
| 859 | } |
| 860 | drm_modeset_unlock(&crtc->mutex); |
| 861 | } |
| 862 | |
| 863 | #define SYNC_LOST_COUNT_LIMIT 50 |
| 864 | |
| 865 | irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) |
| 866 | { |
| 867 | struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); |
| 868 | struct drm_device *dev = crtc->dev; |
| 869 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 870 | uint32_t stat, reg; |
| 871 | |
| 872 | stat = tilcdc_read_irqstatus(dev); |
| 873 | tilcdc_clear_irqstatus(dev, stat); |
| 874 | |
| 875 | if (stat & LCDC_END_OF_FRAME0) { |
| 876 | unsigned long flags; |
| 877 | bool skip_event = false; |
| 878 | ktime_t now; |
| 879 | |
| 880 | now = ktime_get(); |
| 881 | |
| 882 | spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); |
| 883 | |
| 884 | tilcdc_crtc->last_vblank = now; |
| 885 | |
| 886 | if (tilcdc_crtc->next_fb) { |
| 887 | set_scanout(crtc, tilcdc_crtc->next_fb); |
| 888 | tilcdc_crtc->next_fb = NULL; |
| 889 | skip_event = true; |
| 890 | } |
| 891 | |
| 892 | spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); |
| 893 | |
| 894 | drm_crtc_handle_vblank(crtc); |
| 895 | |
| 896 | if (!skip_event) { |
| 897 | struct drm_pending_vblank_event *event; |
| 898 | |
| 899 | spin_lock_irqsave(&dev->event_lock, flags); |
| 900 | |
| 901 | event = tilcdc_crtc->event; |
| 902 | tilcdc_crtc->event = NULL; |
| 903 | if (event) |
| 904 | drm_crtc_send_vblank_event(crtc, event); |
| 905 | |
| 906 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 907 | } |
| 908 | |
| 909 | if (tilcdc_crtc->frame_intact) |
| 910 | tilcdc_crtc->sync_lost_count = 0; |
| 911 | else |
| 912 | tilcdc_crtc->frame_intact = true; |
| 913 | } |
| 914 | |
| 915 | if (stat & LCDC_FIFO_UNDERFLOW) |
| 916 | dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow", |
| 917 | __func__, stat); |
| 918 | |
| 919 | if (stat & LCDC_PL_LOAD_DONE) { |
| 920 | complete(&tilcdc_crtc->palette_loaded); |
| 921 | if (priv->rev == 1) |
| 922 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, |
| 923 | LCDC_V1_PL_INT_ENA); |
| 924 | else |
| 925 | tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, |
| 926 | LCDC_V2_PL_INT_ENA); |
| 927 | } |
| 928 | |
| 929 | if (stat & LCDC_SYNC_LOST) { |
| 930 | dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", |
| 931 | __func__, stat); |
| 932 | tilcdc_crtc->frame_intact = false; |
| 933 | if (priv->rev == 1) { |
| 934 | reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG); |
| 935 | if (reg & LCDC_RASTER_ENABLE) { |
| 936 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, |
| 937 | LCDC_RASTER_ENABLE); |
| 938 | tilcdc_set(dev, LCDC_RASTER_CTRL_REG, |
| 939 | LCDC_RASTER_ENABLE); |
| 940 | } |
| 941 | } else { |
| 942 | if (tilcdc_crtc->sync_lost_count++ > |
| 943 | SYNC_LOST_COUNT_LIMIT) { |
| 944 | dev_err(dev->dev, |
| 945 | "%s(0x%08x): Sync lost flood detected, recovering", |
| 946 | __func__, stat); |
| 947 | queue_work(system_wq, |
| 948 | &tilcdc_crtc->recover_work); |
| 949 | tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, |
| 950 | LCDC_SYNC_LOST); |
| 951 | tilcdc_crtc->sync_lost_count = 0; |
| 952 | } |
| 953 | } |
| 954 | } |
| 955 | |
| 956 | if (stat & LCDC_FRAME_DONE) { |
| 957 | tilcdc_crtc->frame_done = true; |
| 958 | wake_up(&tilcdc_crtc->frame_done_wq); |
| 959 | /* rev 1 lcdc appears to hang if irq is not disbaled here */ |
| 960 | if (priv->rev == 1) |
| 961 | tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, |
| 962 | LCDC_V1_FRAME_DONE_INT_ENA); |
| 963 | } |
| 964 | |
| 965 | /* For revision 2 only */ |
| 966 | if (priv->rev == 2) { |
| 967 | /* Indicate to LCDC that the interrupt service routine has |
| 968 | * completed, see 13.3.6.1.6 in AM335x TRM. |
| 969 | */ |
| 970 | tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); |
| 971 | } |
| 972 | |
| 973 | return IRQ_HANDLED; |
| 974 | } |
| 975 | |
| 976 | int tilcdc_crtc_create(struct drm_device *dev) |
| 977 | { |
| 978 | struct tilcdc_drm_private *priv = dev->dev_private; |
| 979 | struct tilcdc_crtc *tilcdc_crtc; |
| 980 | struct drm_crtc *crtc; |
| 981 | int ret; |
| 982 | |
| 983 | tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL); |
| 984 | if (!tilcdc_crtc) |
| 985 | return -ENOMEM; |
| 986 | |
| 987 | init_completion(&tilcdc_crtc->palette_loaded); |
| 988 | tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev, |
| 989 | TILCDC_PALETTE_SIZE, |
| 990 | &tilcdc_crtc->palette_dma_handle, |
| 991 | GFP_KERNEL | __GFP_ZERO); |
| 992 | if (!tilcdc_crtc->palette_base) |
| 993 | return -ENOMEM; |
| 994 | *tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY; |
| 995 | |
| 996 | crtc = &tilcdc_crtc->base; |
| 997 | |
| 998 | ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary); |
| 999 | if (ret < 0) |
| 1000 | goto fail; |
| 1001 | |
| 1002 | mutex_init(&tilcdc_crtc->enable_lock); |
| 1003 | |
| 1004 | init_waitqueue_head(&tilcdc_crtc->frame_done_wq); |
| 1005 | |
| 1006 | spin_lock_init(&tilcdc_crtc->irq_lock); |
| 1007 | INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work); |
| 1008 | |
| 1009 | ret = drm_crtc_init_with_planes(dev, crtc, |
| 1010 | &tilcdc_crtc->primary, |
| 1011 | NULL, |
| 1012 | &tilcdc_crtc_funcs, |
| 1013 | "tilcdc crtc"); |
| 1014 | if (ret < 0) |
| 1015 | goto fail; |
| 1016 | |
| 1017 | drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs); |
| 1018 | |
| 1019 | if (priv->is_componentized) { |
| 1020 | crtc->port = of_graph_get_port_by_id(dev->dev->of_node, 0); |
| 1021 | if (!crtc->port) { /* This should never happen */ |
| 1022 | dev_err(dev->dev, "Port node not found in %pOF\n", |
| 1023 | dev->dev->of_node); |
| 1024 | ret = -EINVAL; |
| 1025 | goto fail; |
| 1026 | } |
| 1027 | } |
| 1028 | |
| 1029 | priv->crtc = crtc; |
| 1030 | return 0; |
| 1031 | |
| 1032 | fail: |
| 1033 | tilcdc_crtc_destroy(crtc); |
| 1034 | return ret; |
| 1035 | } |