b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * isl6421.h - driver for lnb supply and control ic ISL6421 |
| 4 | * |
| 5 | * Copyright (C) 2006 Andrew de Quincey |
| 6 | * Copyright (C) 2006 Oliver Endriss |
| 7 | * |
| 8 | * the project's page is at https://linuxtv.org |
| 9 | */ |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/errno.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/kernel.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/string.h> |
| 16 | #include <linux/slab.h> |
| 17 | |
| 18 | #include <media/dvb_frontend.h> |
| 19 | #include "isl6421.h" |
| 20 | |
| 21 | struct isl6421 { |
| 22 | u8 config; |
| 23 | u8 override_or; |
| 24 | u8 override_and; |
| 25 | struct i2c_adapter *i2c; |
| 26 | u8 i2c_addr; |
| 27 | bool is_off; |
| 28 | }; |
| 29 | |
| 30 | static int isl6421_set_voltage(struct dvb_frontend *fe, |
| 31 | enum fe_sec_voltage voltage) |
| 32 | { |
| 33 | int ret; |
| 34 | u8 buf; |
| 35 | bool is_off; |
| 36 | struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| 37 | struct i2c_msg msg[2] = { |
| 38 | { |
| 39 | .addr = isl6421->i2c_addr, |
| 40 | .flags = 0, |
| 41 | .buf = &isl6421->config, |
| 42 | .len = 1, |
| 43 | }, { |
| 44 | .addr = isl6421->i2c_addr, |
| 45 | .flags = I2C_M_RD, |
| 46 | .buf = &buf, |
| 47 | .len = 1, |
| 48 | } |
| 49 | |
| 50 | }; |
| 51 | |
| 52 | isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); |
| 53 | |
| 54 | switch(voltage) { |
| 55 | case SEC_VOLTAGE_OFF: |
| 56 | is_off = true; |
| 57 | break; |
| 58 | case SEC_VOLTAGE_13: |
| 59 | is_off = false; |
| 60 | isl6421->config |= ISL6421_EN1; |
| 61 | break; |
| 62 | case SEC_VOLTAGE_18: |
| 63 | is_off = false; |
| 64 | isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); |
| 65 | break; |
| 66 | default: |
| 67 | return -EINVAL; |
| 68 | } |
| 69 | |
| 70 | /* |
| 71 | * If LNBf were not powered on, disable dynamic current limit, as, |
| 72 | * according with datasheet, highly capacitive load on the output may |
| 73 | * cause a difficult start-up. |
| 74 | */ |
| 75 | if (isl6421->is_off && !is_off) |
| 76 | isl6421->config |= ISL6421_DCL; |
| 77 | |
| 78 | isl6421->config |= isl6421->override_or; |
| 79 | isl6421->config &= isl6421->override_and; |
| 80 | |
| 81 | ret = i2c_transfer(isl6421->i2c, msg, 2); |
| 82 | if (ret < 0) |
| 83 | return ret; |
| 84 | if (ret != 2) |
| 85 | return -EIO; |
| 86 | |
| 87 | /* Store off status now in case future commands fail */ |
| 88 | isl6421->is_off = is_off; |
| 89 | |
| 90 | /* On overflow, the device will try again after 900 ms (typically) */ |
| 91 | if (!is_off && (buf & ISL6421_OLF1)) |
| 92 | msleep(1000); |
| 93 | |
| 94 | /* Re-enable dynamic current limit */ |
| 95 | if ((isl6421->config & ISL6421_DCL) && |
| 96 | !(isl6421->override_or & ISL6421_DCL)) { |
| 97 | isl6421->config &= ~ISL6421_DCL; |
| 98 | |
| 99 | ret = i2c_transfer(isl6421->i2c, msg, 2); |
| 100 | if (ret < 0) |
| 101 | return ret; |
| 102 | if (ret != 2) |
| 103 | return -EIO; |
| 104 | } |
| 105 | |
| 106 | /* Check if overload flag is active. If so, disable power */ |
| 107 | if (!is_off && (buf & ISL6421_OLF1)) { |
| 108 | isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); |
| 109 | ret = i2c_transfer(isl6421->i2c, msg, 1); |
| 110 | if (ret < 0) |
| 111 | return ret; |
| 112 | if (ret != 1) |
| 113 | return -EIO; |
| 114 | isl6421->is_off = true; |
| 115 | |
| 116 | dev_warn(&isl6421->i2c->dev, |
| 117 | "Overload current detected. disabling LNBf power\n"); |
| 118 | return -EINVAL; |
| 119 | } |
| 120 | |
| 121 | return 0; |
| 122 | } |
| 123 | |
| 124 | static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) |
| 125 | { |
| 126 | struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| 127 | struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, |
| 128 | .buf = &isl6421->config, |
| 129 | .len = sizeof(isl6421->config) }; |
| 130 | |
| 131 | if (arg) |
| 132 | isl6421->config |= ISL6421_LLC1; |
| 133 | else |
| 134 | isl6421->config &= ~ISL6421_LLC1; |
| 135 | |
| 136 | isl6421->config |= isl6421->override_or; |
| 137 | isl6421->config &= isl6421->override_and; |
| 138 | |
| 139 | return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; |
| 140 | } |
| 141 | |
| 142 | static int isl6421_set_tone(struct dvb_frontend *fe, |
| 143 | enum fe_sec_tone_mode tone) |
| 144 | { |
| 145 | struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| 146 | struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, |
| 147 | .buf = &isl6421->config, |
| 148 | .len = sizeof(isl6421->config) }; |
| 149 | |
| 150 | switch (tone) { |
| 151 | case SEC_TONE_ON: |
| 152 | isl6421->config |= ISL6421_ENT1; |
| 153 | break; |
| 154 | case SEC_TONE_OFF: |
| 155 | isl6421->config &= ~ISL6421_ENT1; |
| 156 | break; |
| 157 | default: |
| 158 | return -EINVAL; |
| 159 | } |
| 160 | |
| 161 | isl6421->config |= isl6421->override_or; |
| 162 | isl6421->config &= isl6421->override_and; |
| 163 | |
| 164 | return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; |
| 165 | } |
| 166 | |
| 167 | static void isl6421_release(struct dvb_frontend *fe) |
| 168 | { |
| 169 | /* power off */ |
| 170 | isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); |
| 171 | |
| 172 | /* free */ |
| 173 | kfree(fe->sec_priv); |
| 174 | fe->sec_priv = NULL; |
| 175 | } |
| 176 | |
| 177 | struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, |
| 178 | u8 override_set, u8 override_clear, bool override_tone) |
| 179 | { |
| 180 | struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); |
| 181 | if (!isl6421) |
| 182 | return NULL; |
| 183 | |
| 184 | /* default configuration */ |
| 185 | isl6421->config = ISL6421_ISEL1; |
| 186 | isl6421->i2c = i2c; |
| 187 | isl6421->i2c_addr = i2c_addr; |
| 188 | fe->sec_priv = isl6421; |
| 189 | |
| 190 | /* bits which should be forced to '1' */ |
| 191 | isl6421->override_or = override_set; |
| 192 | |
| 193 | /* bits which should be forced to '0' */ |
| 194 | isl6421->override_and = ~override_clear; |
| 195 | |
| 196 | /* detect if it is present or not */ |
| 197 | if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { |
| 198 | kfree(isl6421); |
| 199 | fe->sec_priv = NULL; |
| 200 | return NULL; |
| 201 | } |
| 202 | |
| 203 | isl6421->is_off = true; |
| 204 | |
| 205 | /* install release callback */ |
| 206 | fe->ops.release_sec = isl6421_release; |
| 207 | |
| 208 | /* override frontend ops */ |
| 209 | fe->ops.set_voltage = isl6421_set_voltage; |
| 210 | fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; |
| 211 | if (override_tone) |
| 212 | fe->ops.set_tone = isl6421_set_tone; |
| 213 | |
| 214 | return fe; |
| 215 | } |
| 216 | EXPORT_SYMBOL_GPL(isl6421_attach); |
| 217 | |
| 218 | MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); |
| 219 | MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); |
| 220 | MODULE_LICENSE("GPL"); |