b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | Mantis PCI bridge driver |
| 4 | |
| 5 | Copyright (C) Manu Abraham (abraham.manu@gmail.com) |
| 6 | |
| 7 | */ |
| 8 | |
| 9 | #include <asm/io.h> |
| 10 | #include <linux/ioport.h> |
| 11 | #include <linux/pci.h> |
| 12 | #include <linux/i2c.h> |
| 13 | |
| 14 | #include <media/dmxdev.h> |
| 15 | #include <media/dvbdev.h> |
| 16 | #include <media/dvb_demux.h> |
| 17 | #include <media/dvb_frontend.h> |
| 18 | #include <media/dvb_net.h> |
| 19 | |
| 20 | #include "mantis_common.h" |
| 21 | #include "mantis_reg.h" |
| 22 | #include "mantis_i2c.h" |
| 23 | |
| 24 | #define TRIALS 10000 |
| 25 | |
| 26 | static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) |
| 27 | { |
| 28 | u32 rxd, i, stat, trials; |
| 29 | |
| 30 | dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ", |
| 31 | __func__, msg->addr); |
| 32 | |
| 33 | for (i = 0; i < msg->len; i++) { |
| 34 | rxd = (msg->addr << 25) | (1 << 24) |
| 35 | | MANTIS_I2C_RATE_3 |
| 36 | | MANTIS_I2C_STOP |
| 37 | | MANTIS_I2C_PGMODE; |
| 38 | |
| 39 | if (i == (msg->len - 1)) |
| 40 | rxd &= ~MANTIS_I2C_STOP; |
| 41 | |
| 42 | mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); |
| 43 | mmwrite(rxd, MANTIS_I2CDATA_CTL); |
| 44 | |
| 45 | /* wait for xfer completion */ |
| 46 | for (trials = 0; trials < TRIALS; trials++) { |
| 47 | stat = mmread(MANTIS_INT_STAT); |
| 48 | if (stat & MANTIS_INT_I2CDONE) |
| 49 | break; |
| 50 | } |
| 51 | |
| 52 | dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); |
| 53 | |
| 54 | /* wait for xfer completion */ |
| 55 | for (trials = 0; trials < TRIALS; trials++) { |
| 56 | stat = mmread(MANTIS_INT_STAT); |
| 57 | if (stat & MANTIS_INT_I2CRACK) |
| 58 | break; |
| 59 | } |
| 60 | |
| 61 | dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); |
| 62 | |
| 63 | rxd = mmread(MANTIS_I2CDATA_CTL); |
| 64 | msg->buf[i] = (u8)((rxd >> 8) & 0xFF); |
| 65 | dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); |
| 66 | } |
| 67 | dprintk(MANTIS_INFO, 0, "]\n"); |
| 68 | |
| 69 | return 0; |
| 70 | } |
| 71 | |
| 72 | static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) |
| 73 | { |
| 74 | int i; |
| 75 | u32 txd = 0, stat, trials; |
| 76 | |
| 77 | dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ", |
| 78 | __func__, msg->addr); |
| 79 | |
| 80 | for (i = 0; i < msg->len; i++) { |
| 81 | dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); |
| 82 | txd = (msg->addr << 25) | (msg->buf[i] << 8) |
| 83 | | MANTIS_I2C_RATE_3 |
| 84 | | MANTIS_I2C_STOP |
| 85 | | MANTIS_I2C_PGMODE; |
| 86 | |
| 87 | if (i == (msg->len - 1)) |
| 88 | txd &= ~MANTIS_I2C_STOP; |
| 89 | |
| 90 | mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); |
| 91 | mmwrite(txd, MANTIS_I2CDATA_CTL); |
| 92 | |
| 93 | /* wait for xfer completion */ |
| 94 | for (trials = 0; trials < TRIALS; trials++) { |
| 95 | stat = mmread(MANTIS_INT_STAT); |
| 96 | if (stat & MANTIS_INT_I2CDONE) |
| 97 | break; |
| 98 | } |
| 99 | |
| 100 | dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); |
| 101 | |
| 102 | /* wait for xfer completion */ |
| 103 | for (trials = 0; trials < TRIALS; trials++) { |
| 104 | stat = mmread(MANTIS_INT_STAT); |
| 105 | if (stat & MANTIS_INT_I2CRACK) |
| 106 | break; |
| 107 | } |
| 108 | |
| 109 | dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); |
| 110 | } |
| 111 | dprintk(MANTIS_INFO, 0, "]\n"); |
| 112 | |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) |
| 117 | { |
| 118 | int ret = 0, i = 0, trials; |
| 119 | u32 stat, data, txd; |
| 120 | struct mantis_pci *mantis; |
| 121 | struct mantis_hwconfig *config; |
| 122 | |
| 123 | mantis = i2c_get_adapdata(adapter); |
| 124 | BUG_ON(!mantis); |
| 125 | config = mantis->hwconfig; |
| 126 | BUG_ON(!config); |
| 127 | |
| 128 | dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); |
| 129 | mutex_lock(&mantis->i2c_lock); |
| 130 | |
| 131 | while (i < num) { |
| 132 | /* Byte MODE */ |
| 133 | if ((config->i2c_mode & MANTIS_BYTE_MODE) && |
| 134 | ((i + 1) < num) && |
| 135 | (msgs[i].len < 2) && |
| 136 | (msgs[i + 1].len < 2) && |
| 137 | (msgs[i + 1].flags & I2C_M_RD)) { |
| 138 | |
| 139 | dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); |
| 140 | |
| 141 | /* Read operation */ |
| 142 | txd = msgs[i].addr << 25 | (0x1 << 24) |
| 143 | | (msgs[i].buf[0] << 16) |
| 144 | | MANTIS_I2C_RATE_3; |
| 145 | |
| 146 | mmwrite(txd, MANTIS_I2CDATA_CTL); |
| 147 | /* wait for xfer completion */ |
| 148 | for (trials = 0; trials < TRIALS; trials++) { |
| 149 | stat = mmread(MANTIS_INT_STAT); |
| 150 | if (stat & MANTIS_INT_I2CDONE) |
| 151 | break; |
| 152 | } |
| 153 | |
| 154 | /* check for xfer completion */ |
| 155 | if (stat & MANTIS_INT_I2CDONE) { |
| 156 | /* check xfer was acknowledged */ |
| 157 | if (stat & MANTIS_INT_I2CRACK) { |
| 158 | data = mmread(MANTIS_I2CDATA_CTL); |
| 159 | msgs[i + 1].buf[0] = (data >> 8) & 0xff; |
| 160 | dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); |
| 161 | } else { |
| 162 | /* I/O error */ |
| 163 | dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); |
| 164 | ret = -EIO; |
| 165 | break; |
| 166 | } |
| 167 | } else { |
| 168 | /* I/O error */ |
| 169 | dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); |
| 170 | ret = -EIO; |
| 171 | break; |
| 172 | } |
| 173 | i += 2; /* Write/Read operation in one go */ |
| 174 | } |
| 175 | |
| 176 | if (i < num) { |
| 177 | if (msgs[i].flags & I2C_M_RD) |
| 178 | ret = mantis_i2c_read(mantis, &msgs[i]); |
| 179 | else |
| 180 | ret = mantis_i2c_write(mantis, &msgs[i]); |
| 181 | |
| 182 | i++; |
| 183 | if (ret < 0) |
| 184 | goto bail_out; |
| 185 | } |
| 186 | |
| 187 | } |
| 188 | |
| 189 | mutex_unlock(&mantis->i2c_lock); |
| 190 | |
| 191 | return num; |
| 192 | |
| 193 | bail_out: |
| 194 | mutex_unlock(&mantis->i2c_lock); |
| 195 | return ret; |
| 196 | } |
| 197 | |
| 198 | static u32 mantis_i2c_func(struct i2c_adapter *adapter) |
| 199 | { |
| 200 | return I2C_FUNC_SMBUS_EMUL; |
| 201 | } |
| 202 | |
| 203 | static const struct i2c_algorithm mantis_algo = { |
| 204 | .master_xfer = mantis_i2c_xfer, |
| 205 | .functionality = mantis_i2c_func, |
| 206 | }; |
| 207 | |
| 208 | int mantis_i2c_init(struct mantis_pci *mantis) |
| 209 | { |
| 210 | u32 intstat; |
| 211 | struct i2c_adapter *i2c_adapter = &mantis->adapter; |
| 212 | struct pci_dev *pdev = mantis->pdev; |
| 213 | |
| 214 | init_waitqueue_head(&mantis->i2c_wq); |
| 215 | mutex_init(&mantis->i2c_lock); |
| 216 | strscpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name)); |
| 217 | i2c_set_adapdata(i2c_adapter, mantis); |
| 218 | |
| 219 | i2c_adapter->owner = THIS_MODULE; |
| 220 | i2c_adapter->algo = &mantis_algo; |
| 221 | i2c_adapter->algo_data = NULL; |
| 222 | i2c_adapter->timeout = 500; |
| 223 | i2c_adapter->retries = 3; |
| 224 | i2c_adapter->dev.parent = &pdev->dev; |
| 225 | |
| 226 | mantis->i2c_rc = i2c_add_adapter(i2c_adapter); |
| 227 | if (mantis->i2c_rc < 0) |
| 228 | return mantis->i2c_rc; |
| 229 | |
| 230 | dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); |
| 231 | |
| 232 | intstat = mmread(MANTIS_INT_STAT); |
| 233 | mmread(MANTIS_INT_MASK); |
| 234 | mmwrite(intstat, MANTIS_INT_STAT); |
| 235 | dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); |
| 236 | mantis_mask_ints(mantis, MANTIS_INT_I2CDONE); |
| 237 | |
| 238 | return 0; |
| 239 | } |
| 240 | EXPORT_SYMBOL_GPL(mantis_i2c_init); |
| 241 | |
| 242 | int mantis_i2c_exit(struct mantis_pci *mantis) |
| 243 | { |
| 244 | dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); |
| 245 | mantis_mask_ints(mantis, MANTIS_INT_I2CDONE); |
| 246 | |
| 247 | dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); |
| 248 | i2c_del_adapter(&mantis->adapter); |
| 249 | |
| 250 | return 0; |
| 251 | } |
| 252 | EXPORT_SYMBOL_GPL(mantis_i2c_exit); |