b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * vimc-scaler.c Virtual Media Controller Driver |
| 4 | * |
| 5 | * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> |
| 6 | */ |
| 7 | |
| 8 | #include <linux/component.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/mod_devicetable.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/vmalloc.h> |
| 13 | #include <linux/v4l2-mediabus.h> |
| 14 | #include <media/v4l2-subdev.h> |
| 15 | |
| 16 | #include "vimc-common.h" |
| 17 | |
| 18 | #define VIMC_SCA_DRV_NAME "vimc-scaler" |
| 19 | |
| 20 | static unsigned int sca_mult = 3; |
| 21 | module_param(sca_mult, uint, 0000); |
| 22 | MODULE_PARM_DESC(sca_mult, " the image size multiplier"); |
| 23 | |
| 24 | #define IS_SINK(pad) (!pad) |
| 25 | #define IS_SRC(pad) (pad) |
| 26 | #define MAX_ZOOM 8 |
| 27 | |
| 28 | struct vimc_sca_device { |
| 29 | struct vimc_ent_device ved; |
| 30 | struct v4l2_subdev sd; |
| 31 | struct device *dev; |
| 32 | /* NOTE: the source fmt is the same as the sink |
| 33 | * with the width and hight multiplied by mult |
| 34 | */ |
| 35 | struct v4l2_mbus_framefmt sink_fmt; |
| 36 | /* Values calculated when the stream starts */ |
| 37 | u8 *src_frame; |
| 38 | unsigned int src_line_size; |
| 39 | unsigned int bpp; |
| 40 | }; |
| 41 | |
| 42 | static const struct v4l2_mbus_framefmt sink_fmt_default = { |
| 43 | .width = 640, |
| 44 | .height = 480, |
| 45 | .code = MEDIA_BUS_FMT_RGB888_1X24, |
| 46 | .field = V4L2_FIELD_NONE, |
| 47 | .colorspace = V4L2_COLORSPACE_DEFAULT, |
| 48 | }; |
| 49 | |
| 50 | static int vimc_sca_init_cfg(struct v4l2_subdev *sd, |
| 51 | struct v4l2_subdev_pad_config *cfg) |
| 52 | { |
| 53 | struct v4l2_mbus_framefmt *mf; |
| 54 | unsigned int i; |
| 55 | |
| 56 | mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| 57 | *mf = sink_fmt_default; |
| 58 | |
| 59 | for (i = 1; i < sd->entity.num_pads; i++) { |
| 60 | mf = v4l2_subdev_get_try_format(sd, cfg, i); |
| 61 | *mf = sink_fmt_default; |
| 62 | mf->width = mf->width * sca_mult; |
| 63 | mf->height = mf->height * sca_mult; |
| 64 | } |
| 65 | |
| 66 | return 0; |
| 67 | } |
| 68 | |
| 69 | static int vimc_sca_enum_mbus_code(struct v4l2_subdev *sd, |
| 70 | struct v4l2_subdev_pad_config *cfg, |
| 71 | struct v4l2_subdev_mbus_code_enum *code) |
| 72 | { |
| 73 | const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index); |
| 74 | |
| 75 | /* We don't support bayer format */ |
| 76 | if (!vpix || vpix->bayer) |
| 77 | return -EINVAL; |
| 78 | |
| 79 | code->code = vpix->code; |
| 80 | |
| 81 | return 0; |
| 82 | } |
| 83 | |
| 84 | static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd, |
| 85 | struct v4l2_subdev_pad_config *cfg, |
| 86 | struct v4l2_subdev_frame_size_enum *fse) |
| 87 | { |
| 88 | const struct vimc_pix_map *vpix; |
| 89 | |
| 90 | if (fse->index) |
| 91 | return -EINVAL; |
| 92 | |
| 93 | /* Only accept code in the pix map table in non bayer format */ |
| 94 | vpix = vimc_pix_map_by_code(fse->code); |
| 95 | if (!vpix || vpix->bayer) |
| 96 | return -EINVAL; |
| 97 | |
| 98 | fse->min_width = VIMC_FRAME_MIN_WIDTH; |
| 99 | fse->min_height = VIMC_FRAME_MIN_HEIGHT; |
| 100 | |
| 101 | if (IS_SINK(fse->pad)) { |
| 102 | fse->max_width = VIMC_FRAME_MAX_WIDTH; |
| 103 | fse->max_height = VIMC_FRAME_MAX_HEIGHT; |
| 104 | } else { |
| 105 | fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM; |
| 106 | fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM; |
| 107 | } |
| 108 | |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static int vimc_sca_get_fmt(struct v4l2_subdev *sd, |
| 113 | struct v4l2_subdev_pad_config *cfg, |
| 114 | struct v4l2_subdev_format *format) |
| 115 | { |
| 116 | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); |
| 117 | |
| 118 | /* Get the current sink format */ |
| 119 | format->format = (format->which == V4L2_SUBDEV_FORMAT_TRY) ? |
| 120 | *v4l2_subdev_get_try_format(sd, cfg, 0) : |
| 121 | vsca->sink_fmt; |
| 122 | |
| 123 | /* Scale the frame size for the source pad */ |
| 124 | if (IS_SRC(format->pad)) { |
| 125 | format->format.width = vsca->sink_fmt.width * sca_mult; |
| 126 | format->format.height = vsca->sink_fmt.height * sca_mult; |
| 127 | } |
| 128 | |
| 129 | return 0; |
| 130 | } |
| 131 | |
| 132 | static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt) |
| 133 | { |
| 134 | const struct vimc_pix_map *vpix; |
| 135 | |
| 136 | /* Only accept code in the pix map table in non bayer format */ |
| 137 | vpix = vimc_pix_map_by_code(fmt->code); |
| 138 | if (!vpix || vpix->bayer) |
| 139 | fmt->code = sink_fmt_default.code; |
| 140 | |
| 141 | fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH, |
| 142 | VIMC_FRAME_MAX_WIDTH) & ~1; |
| 143 | fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT, |
| 144 | VIMC_FRAME_MAX_HEIGHT) & ~1; |
| 145 | |
| 146 | if (fmt->field == V4L2_FIELD_ANY) |
| 147 | fmt->field = sink_fmt_default.field; |
| 148 | |
| 149 | vimc_colorimetry_clamp(fmt); |
| 150 | } |
| 151 | |
| 152 | static int vimc_sca_set_fmt(struct v4l2_subdev *sd, |
| 153 | struct v4l2_subdev_pad_config *cfg, |
| 154 | struct v4l2_subdev_format *fmt) |
| 155 | { |
| 156 | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); |
| 157 | struct v4l2_mbus_framefmt *sink_fmt; |
| 158 | |
| 159 | if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { |
| 160 | /* Do not change the format while stream is on */ |
| 161 | if (vsca->src_frame) |
| 162 | return -EBUSY; |
| 163 | |
| 164 | sink_fmt = &vsca->sink_fmt; |
| 165 | } else { |
| 166 | sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); |
| 167 | } |
| 168 | |
| 169 | /* |
| 170 | * Do not change the format of the source pad, |
| 171 | * it is propagated from the sink |
| 172 | */ |
| 173 | if (IS_SRC(fmt->pad)) { |
| 174 | fmt->format = *sink_fmt; |
| 175 | fmt->format.width = sink_fmt->width * sca_mult; |
| 176 | fmt->format.height = sink_fmt->height * sca_mult; |
| 177 | } else { |
| 178 | /* Set the new format in the sink pad */ |
| 179 | vimc_sca_adjust_sink_fmt(&fmt->format); |
| 180 | |
| 181 | dev_dbg(vsca->dev, "%s: sink format update: " |
| 182 | "old:%dx%d (0x%x, %d, %d, %d, %d) " |
| 183 | "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name, |
| 184 | /* old */ |
| 185 | sink_fmt->width, sink_fmt->height, sink_fmt->code, |
| 186 | sink_fmt->colorspace, sink_fmt->quantization, |
| 187 | sink_fmt->xfer_func, sink_fmt->ycbcr_enc, |
| 188 | /* new */ |
| 189 | fmt->format.width, fmt->format.height, fmt->format.code, |
| 190 | fmt->format.colorspace, fmt->format.quantization, |
| 191 | fmt->format.xfer_func, fmt->format.ycbcr_enc); |
| 192 | |
| 193 | *sink_fmt = fmt->format; |
| 194 | } |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = { |
| 200 | .init_cfg = vimc_sca_init_cfg, |
| 201 | .enum_mbus_code = vimc_sca_enum_mbus_code, |
| 202 | .enum_frame_size = vimc_sca_enum_frame_size, |
| 203 | .get_fmt = vimc_sca_get_fmt, |
| 204 | .set_fmt = vimc_sca_set_fmt, |
| 205 | }; |
| 206 | |
| 207 | static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable) |
| 208 | { |
| 209 | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); |
| 210 | |
| 211 | if (enable) { |
| 212 | const struct vimc_pix_map *vpix; |
| 213 | unsigned int frame_size; |
| 214 | |
| 215 | if (vsca->src_frame) |
| 216 | return 0; |
| 217 | |
| 218 | /* Save the bytes per pixel of the sink */ |
| 219 | vpix = vimc_pix_map_by_code(vsca->sink_fmt.code); |
| 220 | vsca->bpp = vpix->bpp; |
| 221 | |
| 222 | /* Calculate the width in bytes of the src frame */ |
| 223 | vsca->src_line_size = vsca->sink_fmt.width * |
| 224 | sca_mult * vsca->bpp; |
| 225 | |
| 226 | /* Calculate the frame size of the source pad */ |
| 227 | frame_size = vsca->src_line_size * vsca->sink_fmt.height * |
| 228 | sca_mult; |
| 229 | |
| 230 | /* Allocate the frame buffer. Use vmalloc to be able to |
| 231 | * allocate a large amount of memory |
| 232 | */ |
| 233 | vsca->src_frame = vmalloc(frame_size); |
| 234 | if (!vsca->src_frame) |
| 235 | return -ENOMEM; |
| 236 | |
| 237 | } else { |
| 238 | if (!vsca->src_frame) |
| 239 | return 0; |
| 240 | |
| 241 | vfree(vsca->src_frame); |
| 242 | vsca->src_frame = NULL; |
| 243 | } |
| 244 | |
| 245 | return 0; |
| 246 | } |
| 247 | |
| 248 | static const struct v4l2_subdev_video_ops vimc_sca_video_ops = { |
| 249 | .s_stream = vimc_sca_s_stream, |
| 250 | }; |
| 251 | |
| 252 | static const struct v4l2_subdev_ops vimc_sca_ops = { |
| 253 | .pad = &vimc_sca_pad_ops, |
| 254 | .video = &vimc_sca_video_ops, |
| 255 | }; |
| 256 | |
| 257 | static void vimc_sca_fill_pix(u8 *const ptr, |
| 258 | const u8 *const pixel, |
| 259 | const unsigned int bpp) |
| 260 | { |
| 261 | unsigned int i; |
| 262 | |
| 263 | /* copy the pixel to the pointer */ |
| 264 | for (i = 0; i < bpp; i++) |
| 265 | ptr[i] = pixel[i]; |
| 266 | } |
| 267 | |
| 268 | static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca, |
| 269 | const unsigned int lin, const unsigned int col, |
| 270 | const u8 *const sink_frame) |
| 271 | { |
| 272 | unsigned int i, j, index; |
| 273 | const u8 *pixel; |
| 274 | |
| 275 | /* Point to the pixel value in position (lin, col) in the sink frame */ |
| 276 | index = VIMC_FRAME_INDEX(lin, col, |
| 277 | vsca->sink_fmt.width, |
| 278 | vsca->bpp); |
| 279 | pixel = &sink_frame[index]; |
| 280 | |
| 281 | dev_dbg(vsca->dev, |
| 282 | "sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n", |
| 283 | vsca->sd.name, lin, col, index); |
| 284 | |
| 285 | /* point to the place we are going to put the first pixel |
| 286 | * in the scaled src frame |
| 287 | */ |
| 288 | index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult, |
| 289 | vsca->sink_fmt.width * sca_mult, vsca->bpp); |
| 290 | |
| 291 | dev_dbg(vsca->dev, "sca: %s: scale_pix src pos %dx%d, index %d\n", |
| 292 | vsca->sd.name, lin * sca_mult, col * sca_mult, index); |
| 293 | |
| 294 | /* Repeat this pixel mult times */ |
| 295 | for (i = 0; i < sca_mult; i++) { |
| 296 | /* Iterate through each beginning of a |
| 297 | * pixel repetition in a line |
| 298 | */ |
| 299 | for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) { |
| 300 | dev_dbg(vsca->dev, |
| 301 | "sca: %s: sca: scale_pix src pos %d\n", |
| 302 | vsca->sd.name, index + j); |
| 303 | |
| 304 | /* copy the pixel to the position index + j */ |
| 305 | vimc_sca_fill_pix(&vsca->src_frame[index + j], |
| 306 | pixel, vsca->bpp); |
| 307 | } |
| 308 | |
| 309 | /* move the index to the next line */ |
| 310 | index += vsca->src_line_size; |
| 311 | } |
| 312 | } |
| 313 | |
| 314 | static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca, |
| 315 | const u8 *const sink_frame) |
| 316 | { |
| 317 | unsigned int i, j; |
| 318 | |
| 319 | /* Scale each pixel from the original sink frame */ |
| 320 | /* TODO: implement scale down, only scale up is supported for now */ |
| 321 | for (i = 0; i < vsca->sink_fmt.height; i++) |
| 322 | for (j = 0; j < vsca->sink_fmt.width; j++) |
| 323 | vimc_sca_scale_pix(vsca, i, j, sink_frame); |
| 324 | } |
| 325 | |
| 326 | static void *vimc_sca_process_frame(struct vimc_ent_device *ved, |
| 327 | const void *sink_frame) |
| 328 | { |
| 329 | struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device, |
| 330 | ved); |
| 331 | |
| 332 | /* If the stream in this node is not active, just return */ |
| 333 | if (!vsca->src_frame) |
| 334 | return ERR_PTR(-EINVAL); |
| 335 | |
| 336 | vimc_sca_fill_src_frame(vsca, sink_frame); |
| 337 | |
| 338 | return vsca->src_frame; |
| 339 | }; |
| 340 | |
| 341 | static void vimc_sca_release(struct v4l2_subdev *sd) |
| 342 | { |
| 343 | struct vimc_sca_device *vsca = |
| 344 | container_of(sd, struct vimc_sca_device, sd); |
| 345 | |
| 346 | vimc_pads_cleanup(vsca->ved.pads); |
| 347 | kfree(vsca); |
| 348 | } |
| 349 | |
| 350 | static const struct v4l2_subdev_internal_ops vimc_sca_int_ops = { |
| 351 | .release = vimc_sca_release, |
| 352 | }; |
| 353 | |
| 354 | static void vimc_sca_comp_unbind(struct device *comp, struct device *master, |
| 355 | void *master_data) |
| 356 | { |
| 357 | struct vimc_ent_device *ved = dev_get_drvdata(comp); |
| 358 | struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device, |
| 359 | ved); |
| 360 | |
| 361 | vimc_ent_sd_unregister(ved, &vsca->sd); |
| 362 | } |
| 363 | |
| 364 | |
| 365 | static int vimc_sca_comp_bind(struct device *comp, struct device *master, |
| 366 | void *master_data) |
| 367 | { |
| 368 | struct v4l2_device *v4l2_dev = master_data; |
| 369 | struct vimc_platform_data *pdata = comp->platform_data; |
| 370 | struct vimc_sca_device *vsca; |
| 371 | int ret; |
| 372 | |
| 373 | /* Allocate the vsca struct */ |
| 374 | vsca = kzalloc(sizeof(*vsca), GFP_KERNEL); |
| 375 | if (!vsca) |
| 376 | return -ENOMEM; |
| 377 | |
| 378 | /* Initialize ved and sd */ |
| 379 | ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev, |
| 380 | pdata->entity_name, |
| 381 | MEDIA_ENT_F_PROC_VIDEO_SCALER, 2, |
| 382 | (const unsigned long[2]) {MEDIA_PAD_FL_SINK, |
| 383 | MEDIA_PAD_FL_SOURCE}, |
| 384 | &vimc_sca_int_ops, &vimc_sca_ops); |
| 385 | if (ret) { |
| 386 | kfree(vsca); |
| 387 | return ret; |
| 388 | } |
| 389 | |
| 390 | vsca->ved.process_frame = vimc_sca_process_frame; |
| 391 | dev_set_drvdata(comp, &vsca->ved); |
| 392 | vsca->dev = comp; |
| 393 | |
| 394 | /* Initialize the frame format */ |
| 395 | vsca->sink_fmt = sink_fmt_default; |
| 396 | |
| 397 | return 0; |
| 398 | } |
| 399 | |
| 400 | static const struct component_ops vimc_sca_comp_ops = { |
| 401 | .bind = vimc_sca_comp_bind, |
| 402 | .unbind = vimc_sca_comp_unbind, |
| 403 | }; |
| 404 | |
| 405 | static int vimc_sca_probe(struct platform_device *pdev) |
| 406 | { |
| 407 | return component_add(&pdev->dev, &vimc_sca_comp_ops); |
| 408 | } |
| 409 | |
| 410 | static int vimc_sca_remove(struct platform_device *pdev) |
| 411 | { |
| 412 | component_del(&pdev->dev, &vimc_sca_comp_ops); |
| 413 | |
| 414 | return 0; |
| 415 | } |
| 416 | |
| 417 | static const struct platform_device_id vimc_sca_driver_ids[] = { |
| 418 | { |
| 419 | .name = VIMC_SCA_DRV_NAME, |
| 420 | }, |
| 421 | { } |
| 422 | }; |
| 423 | |
| 424 | static struct platform_driver vimc_sca_pdrv = { |
| 425 | .probe = vimc_sca_probe, |
| 426 | .remove = vimc_sca_remove, |
| 427 | .id_table = vimc_sca_driver_ids, |
| 428 | .driver = { |
| 429 | .name = VIMC_SCA_DRV_NAME, |
| 430 | }, |
| 431 | }; |
| 432 | |
| 433 | module_platform_driver(vimc_sca_pdrv); |
| 434 | |
| 435 | MODULE_DEVICE_TABLE(platform, vimc_sca_driver_ids); |
| 436 | |
| 437 | MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Scaler"); |
| 438 | MODULE_AUTHOR("Helen Mae Koike Fornazier <helen.fornazier@gmail.com>"); |
| 439 | MODULE_LICENSE("GPL"); |