blob: ee0711d06b3a78b0cdac507fa3b3e52feda0997c [file] [log] [blame]
b.liue9582032025-04-17 19:18:16 +08001/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2/* Copyright 2013-2016 Freescale Semiconductor Inc.
3 * Copyright 2016 NXP
4 */
5#ifndef __FSL_DPNI_H
6#define __FSL_DPNI_H
7
8#include "dpkg.h"
9
10struct fsl_mc_io;
11
12/**
13 * Data Path Network Interface API
14 * Contains initialization APIs and runtime control APIs for DPNI
15 */
16
17/** General DPNI macros */
18
19/**
20 * Maximum number of traffic classes
21 */
22#define DPNI_MAX_TC 8
23/**
24 * Maximum number of buffer pools per DPNI
25 */
26#define DPNI_MAX_DPBP 8
27
28/**
29 * All traffic classes considered; see dpni_set_queue()
30 */
31#define DPNI_ALL_TCS (u8)(-1)
32/**
33 * All flows within traffic class considered; see dpni_set_queue()
34 */
35#define DPNI_ALL_TC_FLOWS (u16)(-1)
36/**
37 * Generate new flow ID; see dpni_set_queue()
38 */
39#define DPNI_NEW_FLOW_ID (u16)(-1)
40
41/**
42 * Tx traffic is always released to a buffer pool on transmit, there are no
43 * resources allocated to have the frames confirmed back to the source after
44 * transmission.
45 */
46#define DPNI_OPT_TX_FRM_RELEASE 0x000001
47/**
48 * Disables support for MAC address filtering for addresses other than primary
49 * MAC address. This affects both unicast and multicast. Promiscuous mode can
50 * still be enabled/disabled for both unicast and multicast. If promiscuous mode
51 * is disabled, only traffic matching the primary MAC address will be accepted.
52 */
53#define DPNI_OPT_NO_MAC_FILTER 0x000002
54/**
55 * Allocate policers for this DPNI. They can be used to rate-limit traffic per
56 * traffic class (TC) basis.
57 */
58#define DPNI_OPT_HAS_POLICING 0x000004
59/**
60 * Congestion can be managed in several ways, allowing the buffer pool to
61 * deplete on ingress, taildrop on each queue or use congestion groups for sets
62 * of queues. If set, it configures a single congestion groups across all TCs.
63 * If reset, a congestion group is allocated for each TC. Only relevant if the
64 * DPNI has multiple traffic classes.
65 */
66#define DPNI_OPT_SHARED_CONGESTION 0x000008
67/**
68 * Enables TCAM for Flow Steering and QoS look-ups. If not specified, all
69 * look-ups are exact match. Note that TCAM is not available on LS1088 and its
70 * variants. Setting this bit on these SoCs will trigger an error.
71 */
72#define DPNI_OPT_HAS_KEY_MASKING 0x000010
73/**
74 * Disables the flow steering table.
75 */
76#define DPNI_OPT_NO_FS 0x000020
77
78int dpni_open(struct fsl_mc_io *mc_io,
79 u32 cmd_flags,
80 int dpni_id,
81 u16 *token);
82
83int dpni_close(struct fsl_mc_io *mc_io,
84 u32 cmd_flags,
85 u16 token);
86
87/**
88 * struct dpni_pools_cfg - Structure representing buffer pools configuration
89 * @num_dpbp: Number of DPBPs
90 * @pools: Array of buffer pools parameters; The number of valid entries
91 * must match 'num_dpbp' value
92 * @pools.dpbp_id: DPBP object ID
93 * @pools.buffer_size: Buffer size
94 * @pools.backup_pool: Backup pool
95 */
96struct dpni_pools_cfg {
97 u8 num_dpbp;
98 struct {
99 int dpbp_id;
100 u16 buffer_size;
101 int backup_pool;
102 } pools[DPNI_MAX_DPBP];
103};
104
105int dpni_set_pools(struct fsl_mc_io *mc_io,
106 u32 cmd_flags,
107 u16 token,
108 const struct dpni_pools_cfg *cfg);
109
110int dpni_enable(struct fsl_mc_io *mc_io,
111 u32 cmd_flags,
112 u16 token);
113
114int dpni_disable(struct fsl_mc_io *mc_io,
115 u32 cmd_flags,
116 u16 token);
117
118int dpni_is_enabled(struct fsl_mc_io *mc_io,
119 u32 cmd_flags,
120 u16 token,
121 int *en);
122
123int dpni_reset(struct fsl_mc_io *mc_io,
124 u32 cmd_flags,
125 u16 token);
126
127/**
128 * DPNI IRQ Index and Events
129 */
130
131/**
132 * IRQ index
133 */
134#define DPNI_IRQ_INDEX 0
135/**
136 * IRQ events:
137 * indicates a change in link state
138 * indicates a change in endpoint
139 */
140#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001
141#define DPNI_IRQ_EVENT_ENDPOINT_CHANGED 0x00000002
142
143int dpni_set_irq_enable(struct fsl_mc_io *mc_io,
144 u32 cmd_flags,
145 u16 token,
146 u8 irq_index,
147 u8 en);
148
149int dpni_get_irq_enable(struct fsl_mc_io *mc_io,
150 u32 cmd_flags,
151 u16 token,
152 u8 irq_index,
153 u8 *en);
154
155int dpni_set_irq_mask(struct fsl_mc_io *mc_io,
156 u32 cmd_flags,
157 u16 token,
158 u8 irq_index,
159 u32 mask);
160
161int dpni_get_irq_mask(struct fsl_mc_io *mc_io,
162 u32 cmd_flags,
163 u16 token,
164 u8 irq_index,
165 u32 *mask);
166
167int dpni_get_irq_status(struct fsl_mc_io *mc_io,
168 u32 cmd_flags,
169 u16 token,
170 u8 irq_index,
171 u32 *status);
172
173int dpni_clear_irq_status(struct fsl_mc_io *mc_io,
174 u32 cmd_flags,
175 u16 token,
176 u8 irq_index,
177 u32 status);
178
179/**
180 * struct dpni_attr - Structure representing DPNI attributes
181 * @options: Any combination of the following options:
182 * DPNI_OPT_TX_FRM_RELEASE
183 * DPNI_OPT_NO_MAC_FILTER
184 * DPNI_OPT_HAS_POLICING
185 * DPNI_OPT_SHARED_CONGESTION
186 * DPNI_OPT_HAS_KEY_MASKING
187 * DPNI_OPT_NO_FS
188 * @num_queues: Number of Tx and Rx queues used for traffic distribution.
189 * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI.
190 * @mac_filter_entries: Number of entries in the MAC address filtering table.
191 * @vlan_filter_entries: Number of entries in the VLAN address filtering table.
192 * @qos_entries: Number of entries in the QoS classification table.
193 * @fs_entries: Number of entries in the flow steering table.
194 * @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger
195 * than this when adding QoS entries will result in an error.
196 * @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a
197 * key larger than this when composing the hash + FS key will
198 * result in an error.
199 * @wriop_version: Version of WRIOP HW block. The 3 version values are stored
200 * on 6, 5, 5 bits respectively.
201 */
202struct dpni_attr {
203 u32 options;
204 u8 num_queues;
205 u8 num_tcs;
206 u8 mac_filter_entries;
207 u8 vlan_filter_entries;
208 u8 qos_entries;
209 u16 fs_entries;
210 u8 qos_key_size;
211 u8 fs_key_size;
212 u16 wriop_version;
213};
214
215int dpni_get_attributes(struct fsl_mc_io *mc_io,
216 u32 cmd_flags,
217 u16 token,
218 struct dpni_attr *attr);
219
220/**
221 * DPNI errors
222 */
223
224/**
225 * Extract out of frame header error
226 */
227#define DPNI_ERROR_EOFHE 0x00020000
228/**
229 * Frame length error
230 */
231#define DPNI_ERROR_FLE 0x00002000
232/**
233 * Frame physical error
234 */
235#define DPNI_ERROR_FPE 0x00001000
236/**
237 * Parsing header error
238 */
239#define DPNI_ERROR_PHE 0x00000020
240/**
241 * Parser L3 checksum error
242 */
243#define DPNI_ERROR_L3CE 0x00000004
244/**
245 * Parser L3 checksum error
246 */
247#define DPNI_ERROR_L4CE 0x00000001
248
249/**
250 * enum dpni_error_action - Defines DPNI behavior for errors
251 * @DPNI_ERROR_ACTION_DISCARD: Discard the frame
252 * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow
253 * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue
254 */
255enum dpni_error_action {
256 DPNI_ERROR_ACTION_DISCARD = 0,
257 DPNI_ERROR_ACTION_CONTINUE = 1,
258 DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2
259};
260
261/**
262 * struct dpni_error_cfg - Structure representing DPNI errors treatment
263 * @errors: Errors mask; use 'DPNI_ERROR__<X>
264 * @error_action: The desired action for the errors mask
265 * @set_frame_annotation: Set to '1' to mark the errors in frame annotation
266 * status (FAS); relevant only for the non-discard action
267 */
268struct dpni_error_cfg {
269 u32 errors;
270 enum dpni_error_action error_action;
271 int set_frame_annotation;
272};
273
274int dpni_set_errors_behavior(struct fsl_mc_io *mc_io,
275 u32 cmd_flags,
276 u16 token,
277 struct dpni_error_cfg *cfg);
278
279/**
280 * DPNI buffer layout modification options
281 */
282
283/**
284 * Select to modify the time-stamp setting
285 */
286#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001
287/**
288 * Select to modify the parser-result setting; not applicable for Tx
289 */
290#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002
291/**
292 * Select to modify the frame-status setting
293 */
294#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004
295/**
296 * Select to modify the private-data-size setting
297 */
298#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008
299/**
300 * Select to modify the data-alignment setting
301 */
302#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010
303/**
304 * Select to modify the data-head-room setting
305 */
306#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020
307/**
308 * Select to modify the data-tail-room setting
309 */
310#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040
311
312/**
313 * struct dpni_buffer_layout - Structure representing DPNI buffer layout
314 * @options: Flags representing the suggested modifications to the buffer
315 * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags
316 * @pass_timestamp: Pass timestamp value
317 * @pass_parser_result: Pass parser results
318 * @pass_frame_status: Pass frame status
319 * @private_data_size: Size kept for private data (in bytes)
320 * @data_align: Data alignment
321 * @data_head_room: Data head room
322 * @data_tail_room: Data tail room
323 */
324struct dpni_buffer_layout {
325 u32 options;
326 int pass_timestamp;
327 int pass_parser_result;
328 int pass_frame_status;
329 u16 private_data_size;
330 u16 data_align;
331 u16 data_head_room;
332 u16 data_tail_room;
333};
334
335/**
336 * enum dpni_queue_type - Identifies a type of queue targeted by the command
337 * @DPNI_QUEUE_RX: Rx queue
338 * @DPNI_QUEUE_TX: Tx queue
339 * @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue
340 * @DPNI_QUEUE_RX_ERR: Rx error queue
341 */enum dpni_queue_type {
342 DPNI_QUEUE_RX,
343 DPNI_QUEUE_TX,
344 DPNI_QUEUE_TX_CONFIRM,
345 DPNI_QUEUE_RX_ERR,
346};
347
348int dpni_get_buffer_layout(struct fsl_mc_io *mc_io,
349 u32 cmd_flags,
350 u16 token,
351 enum dpni_queue_type qtype,
352 struct dpni_buffer_layout *layout);
353
354int dpni_set_buffer_layout(struct fsl_mc_io *mc_io,
355 u32 cmd_flags,
356 u16 token,
357 enum dpni_queue_type qtype,
358 const struct dpni_buffer_layout *layout);
359
360/**
361 * enum dpni_offload - Identifies a type of offload targeted by the command
362 * @DPNI_OFF_RX_L3_CSUM: Rx L3 checksum validation
363 * @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation
364 * @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation
365 * @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation
366 */
367enum dpni_offload {
368 DPNI_OFF_RX_L3_CSUM,
369 DPNI_OFF_RX_L4_CSUM,
370 DPNI_OFF_TX_L3_CSUM,
371 DPNI_OFF_TX_L4_CSUM,
372};
373
374int dpni_set_offload(struct fsl_mc_io *mc_io,
375 u32 cmd_flags,
376 u16 token,
377 enum dpni_offload type,
378 u32 config);
379
380int dpni_get_offload(struct fsl_mc_io *mc_io,
381 u32 cmd_flags,
382 u16 token,
383 enum dpni_offload type,
384 u32 *config);
385
386int dpni_get_qdid(struct fsl_mc_io *mc_io,
387 u32 cmd_flags,
388 u16 token,
389 enum dpni_queue_type qtype,
390 u16 *qdid);
391
392int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io,
393 u32 cmd_flags,
394 u16 token,
395 u16 *data_offset);
396
397#define DPNI_STATISTICS_CNT 7
398
399/**
400 * union dpni_statistics - Union describing the DPNI statistics
401 * @page_0: Page_0 statistics structure
402 * @page_0.ingress_all_frames: Ingress frame count
403 * @page_0.ingress_all_bytes: Ingress byte count
404 * @page_0.ingress_multicast_frames: Ingress multicast frame count
405 * @page_0.ingress_multicast_bytes: Ingress multicast byte count
406 * @page_0.ingress_broadcast_frames: Ingress broadcast frame count
407 * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count
408 * @page_1: Page_1 statistics structure
409 * @page_1.egress_all_frames: Egress frame count
410 * @page_1.egress_all_bytes: Egress byte count
411 * @page_1.egress_multicast_frames: Egress multicast frame count
412 * @page_1.egress_multicast_bytes: Egress multicast byte count
413 * @page_1.egress_broadcast_frames: Egress broadcast frame count
414 * @page_1.egress_broadcast_bytes: Egress broadcast byte count
415 * @page_2: Page_2 statistics structure
416 * @page_2.ingress_filtered_frames: Ingress filtered frame count
417 * @page_2.ingress_discarded_frames: Ingress discarded frame count
418 * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to
419 * lack of buffers
420 * @page_2.egress_discarded_frames: Egress discarded frame count
421 * @page_2.egress_confirmed_frames: Egress confirmed frame count
422 * @page3: Page_3 statistics structure
423 * @page_3.egress_dequeue_bytes: Cumulative count of the number of bytes
424 * dequeued from egress FQs
425 * @page_3.egress_dequeue_frames: Cumulative count of the number of frames
426 * dequeued from egress FQs
427 * @page_3.egress_reject_bytes: Cumulative count of the number of bytes in
428 * egress frames whose enqueue was rejected
429 * @page_3.egress_reject_frames: Cumulative count of the number of egress
430 * frames whose enqueue was rejected
431 * @page_4: Page_4 statistics structure: congestion points
432 * @page_4.cgr_reject_frames: number of rejected frames due to congestion point
433 * @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point
434 * @page_5: Page_5 statistics structure: policer
435 * @page_5.policer_cnt_red: NUmber of red colored frames
436 * @page_5.policer_cnt_yellow: number of yellow colored frames
437 * @page_5.policer_cnt_green: number of green colored frames
438 * @page_5.policer_cnt_re_red: number of recolored red frames
439 * @page_5.policer_cnt_re_yellow: number of recolored yellow frames
440 * @page_6: Page_6 statistics structure
441 * @page_6.tx_pending_frames: total number of frames pending in egress FQs
442 * @raw: raw statistics structure, used to index counters
443 */
444union dpni_statistics {
445 struct {
446 u64 ingress_all_frames;
447 u64 ingress_all_bytes;
448 u64 ingress_multicast_frames;
449 u64 ingress_multicast_bytes;
450 u64 ingress_broadcast_frames;
451 u64 ingress_broadcast_bytes;
452 } page_0;
453 struct {
454 u64 egress_all_frames;
455 u64 egress_all_bytes;
456 u64 egress_multicast_frames;
457 u64 egress_multicast_bytes;
458 u64 egress_broadcast_frames;
459 u64 egress_broadcast_bytes;
460 } page_1;
461 struct {
462 u64 ingress_filtered_frames;
463 u64 ingress_discarded_frames;
464 u64 ingress_nobuffer_discards;
465 u64 egress_discarded_frames;
466 u64 egress_confirmed_frames;
467 } page_2;
468 struct {
469 u64 egress_dequeue_bytes;
470 u64 egress_dequeue_frames;
471 u64 egress_reject_bytes;
472 u64 egress_reject_frames;
473 } page_3;
474 struct {
475 u64 cgr_reject_frames;
476 u64 cgr_reject_bytes;
477 } page_4;
478 struct {
479 u64 policer_cnt_red;
480 u64 policer_cnt_yellow;
481 u64 policer_cnt_green;
482 u64 policer_cnt_re_red;
483 u64 policer_cnt_re_yellow;
484 } page_5;
485 struct {
486 u64 tx_pending_frames;
487 } page_6;
488 struct {
489 u64 counter[DPNI_STATISTICS_CNT];
490 } raw;
491};
492
493int dpni_get_statistics(struct fsl_mc_io *mc_io,
494 u32 cmd_flags,
495 u16 token,
496 u8 page,
497 union dpni_statistics *stat);
498
499/**
500 * Enable auto-negotiation
501 */
502#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL
503/**
504 * Enable half-duplex mode
505 */
506#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL
507/**
508 * Enable pause frames
509 */
510#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL
511/**
512 * Enable a-symmetric pause frames
513 */
514#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL
515
516/**
517 * struct - Structure representing DPNI link configuration
518 * @rate: Rate
519 * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
520 */
521struct dpni_link_cfg {
522 u32 rate;
523 u64 options;
524};
525
526int dpni_set_link_cfg(struct fsl_mc_io *mc_io,
527 u32 cmd_flags,
528 u16 token,
529 const struct dpni_link_cfg *cfg);
530
531int dpni_get_link_cfg(struct fsl_mc_io *mc_io,
532 u32 cmd_flags,
533 u16 token,
534 struct dpni_link_cfg *cfg);
535
536/**
537 * struct dpni_link_state - Structure representing DPNI link state
538 * @rate: Rate
539 * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values
540 * @up: Link state; '0' for down, '1' for up
541 */
542struct dpni_link_state {
543 u32 rate;
544 u64 options;
545 int up;
546};
547
548int dpni_get_link_state(struct fsl_mc_io *mc_io,
549 u32 cmd_flags,
550 u16 token,
551 struct dpni_link_state *state);
552
553int dpni_set_max_frame_length(struct fsl_mc_io *mc_io,
554 u32 cmd_flags,
555 u16 token,
556 u16 max_frame_length);
557
558int dpni_get_max_frame_length(struct fsl_mc_io *mc_io,
559 u32 cmd_flags,
560 u16 token,
561 u16 *max_frame_length);
562
563int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io,
564 u32 cmd_flags,
565 u16 token,
566 int en);
567
568int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io,
569 u32 cmd_flags,
570 u16 token,
571 int *en);
572
573int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io,
574 u32 cmd_flags,
575 u16 token,
576 int en);
577
578int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io,
579 u32 cmd_flags,
580 u16 token,
581 int *en);
582
583int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io,
584 u32 cmd_flags,
585 u16 token,
586 const u8 mac_addr[6]);
587
588int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io,
589 u32 cmd_flags,
590 u16 token,
591 u8 mac_addr[6]);
592
593int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io,
594 u32 cm_flags,
595 u16 token,
596 u8 mac_addr[6]);
597
598int dpni_add_mac_addr(struct fsl_mc_io *mc_io,
599 u32 cmd_flags,
600 u16 token,
601 const u8 mac_addr[6]);
602
603int dpni_remove_mac_addr(struct fsl_mc_io *mc_io,
604 u32 cmd_flags,
605 u16 token,
606 const u8 mac_addr[6]);
607
608int dpni_clear_mac_filters(struct fsl_mc_io *mc_io,
609 u32 cmd_flags,
610 u16 token,
611 int unicast,
612 int multicast);
613
614/**
615 * enum dpni_dist_mode - DPNI distribution mode
616 * @DPNI_DIST_MODE_NONE: No distribution
617 * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if
618 * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation
619 * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if
620 * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation
621 */
622enum dpni_dist_mode {
623 DPNI_DIST_MODE_NONE = 0,
624 DPNI_DIST_MODE_HASH = 1,
625 DPNI_DIST_MODE_FS = 2
626};
627
628/**
629 * enum dpni_fs_miss_action - DPNI Flow Steering miss action
630 * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame
631 * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id
632 * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash
633 */
634enum dpni_fs_miss_action {
635 DPNI_FS_MISS_DROP = 0,
636 DPNI_FS_MISS_EXPLICIT_FLOWID = 1,
637 DPNI_FS_MISS_HASH = 2
638};
639
640/**
641 * struct dpni_fs_tbl_cfg - Flow Steering table configuration
642 * @miss_action: Miss action selection
643 * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID'
644 */
645struct dpni_fs_tbl_cfg {
646 enum dpni_fs_miss_action miss_action;
647 u16 default_flow_id;
648};
649
650int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg,
651 u8 *key_cfg_buf);
652
653/**
654 * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration
655 * @dist_size: Set the distribution size;
656 * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96,
657 * 112,128,192,224,256,384,448,512,768,896,1024
658 * @dist_mode: Distribution mode
659 * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
660 * the extractions to be used for the distribution key by calling
661 * dpni_prepare_key_cfg() relevant only when
662 * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0'
663 * @fs_cfg: Flow Steering table configuration; only relevant if
664 * 'dist_mode = DPNI_DIST_MODE_FS'
665 */
666struct dpni_rx_tc_dist_cfg {
667 u16 dist_size;
668 enum dpni_dist_mode dist_mode;
669 u64 key_cfg_iova;
670 struct dpni_fs_tbl_cfg fs_cfg;
671};
672
673int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io,
674 u32 cmd_flags,
675 u16 token,
676 u8 tc_id,
677 const struct dpni_rx_tc_dist_cfg *cfg);
678
679/**
680 * When used for fs_miss_flow_id in function dpni_set_rx_dist,
681 * will signal to dpni to drop all unclassified frames
682 */
683#define DPNI_FS_MISS_DROP ((uint16_t)-1)
684
685/**
686 * struct dpni_rx_dist_cfg - Rx distribution configuration
687 * @dist_size: distribution size
688 * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with
689 * the extractions to be used for the distribution key by calling
690 * dpni_prepare_key_cfg(); relevant only when enable!=0 otherwise
691 * it can be '0'
692 * @enable: enable/disable the distribution.
693 * @tc: TC id for which distribution is set
694 * @fs_miss_flow_id: when packet misses all rules from flow steering table and
695 * hash is disabled it will be put into this queue id; use
696 * DPNI_FS_MISS_DROP to drop frames. The value of this field is
697 * used only when flow steering distribution is enabled and hash
698 * distribution is disabled
699 */
700struct dpni_rx_dist_cfg {
701 u16 dist_size;
702 u64 key_cfg_iova;
703 u8 enable;
704 u8 tc;
705 u16 fs_miss_flow_id;
706};
707
708int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io,
709 u32 cmd_flags,
710 u16 token,
711 const struct dpni_rx_dist_cfg *cfg);
712
713int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io,
714 u32 cmd_flags,
715 u16 token,
716 const struct dpni_rx_dist_cfg *cfg);
717
718/**
719 * enum dpni_dest - DPNI destination types
720 * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and
721 * does not generate FQDAN notifications; user is expected to
722 * dequeue from the queue based on polling or other user-defined
723 * method
724 * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
725 * notifications to the specified DPIO; user is expected to dequeue
726 * from the queue only after notification is received
727 * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate
728 * FQDAN notifications, but is connected to the specified DPCON
729 * object; user is expected to dequeue from the DPCON channel
730 */
731enum dpni_dest {
732 DPNI_DEST_NONE = 0,
733 DPNI_DEST_DPIO = 1,
734 DPNI_DEST_DPCON = 2
735};
736
737/**
738 * struct dpni_queue - Queue structure
739 * @destination - Destination structure
740 * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0.
741 * Identifies either a DPIO or a DPCON object.
742 * Not relevant for Tx queues.
743 * @destination.type: May be one of the following:
744 * 0 - No destination, queue can be manually
745 * queried, but will not push traffic or
746 * notifications to a DPIO;
747 * 1 - The destination is a DPIO. When traffic
748 * becomes available in the queue a FQDAN
749 * (FQ data available notification) will be
750 * generated to selected DPIO;
751 * 2 - The destination is a DPCON. The queue is
752 * associated with a DPCON object for the
753 * purpose of scheduling between multiple
754 * queues. The DPCON may be independently
755 * configured to generate notifications.
756 * Not relevant for Tx queues.
757 * @destination.hold_active: Hold active, maintains a queue scheduled for longer
758 * in a DPIO during dequeue to reduce spread of traffic.
759 * Only relevant if queues are
760 * not affined to a single DPIO.
761 * @user_context: User data, presented to the user along with any frames
762 * from this queue. Not relevant for Tx queues.
763 * @flc: FD FLow Context structure
764 * @flc.value: Default FLC value for traffic dequeued from
765 * this queue. Please check description of FD
766 * structure for more information.
767 * Note that FLC values set using dpni_add_fs_entry,
768 * if any, take precedence over values per queue.
769 * @flc.stash_control: Boolean, indicates whether the 6 lowest
770 * - significant bits are used for stash control.
771 * significant bits are used for stash control. If set, the 6
772 * least significant bits in value are interpreted as follows:
773 * - bits 0-1: indicates the number of 64 byte units of context
774 * that are stashed. FLC value is interpreted as a memory address
775 * in this case, excluding the 6 LS bits.
776 * - bits 2-3: indicates the number of 64 byte units of frame
777 * annotation to be stashed. Annotation is placed at FD[ADDR].
778 * - bits 4-5: indicates the number of 64 byte units of frame
779 * data to be stashed. Frame data is placed at FD[ADDR] +
780 * FD[OFFSET].
781 * For more details check the Frame Descriptor section in the
782 * hardware documentation.
783 */
784struct dpni_queue {
785 struct {
786 u16 id;
787 enum dpni_dest type;
788 char hold_active;
789 u8 priority;
790 } destination;
791 u64 user_context;
792 struct {
793 u64 value;
794 char stash_control;
795 } flc;
796};
797
798/**
799 * struct dpni_queue_id - Queue identification, used for enqueue commands
800 * or queue control
801 * @fqid: FQID used for enqueueing to and/or configuration of this specific FQ
802 * @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI. Only relevant
803 * for Tx queues.
804 */
805struct dpni_queue_id {
806 u32 fqid;
807 u16 qdbin;
808};
809
810/**
811 * Set User Context
812 */
813#define DPNI_QUEUE_OPT_USER_CTX 0x00000001
814#define DPNI_QUEUE_OPT_DEST 0x00000002
815#define DPNI_QUEUE_OPT_FLC 0x00000004
816#define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008
817
818int dpni_set_queue(struct fsl_mc_io *mc_io,
819 u32 cmd_flags,
820 u16 token,
821 enum dpni_queue_type qtype,
822 u8 tc,
823 u8 index,
824 u8 options,
825 const struct dpni_queue *queue);
826
827int dpni_get_queue(struct fsl_mc_io *mc_io,
828 u32 cmd_flags,
829 u16 token,
830 enum dpni_queue_type qtype,
831 u8 tc,
832 u8 index,
833 struct dpni_queue *queue,
834 struct dpni_queue_id *qid);
835
836/**
837 * enum dpni_congestion_unit - DPNI congestion units
838 * @DPNI_CONGESTION_UNIT_BYTES: bytes units
839 * @DPNI_CONGESTION_UNIT_FRAMES: frames units
840 */
841enum dpni_congestion_unit {
842 DPNI_CONGESTION_UNIT_BYTES = 0,
843 DPNI_CONGESTION_UNIT_FRAMES
844};
845
846/**
847 * enum dpni_congestion_point - Structure representing congestion point
848 * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and
849 * QUEUE_INDEX
850 * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used to
851 * define the DPNI this can be either per TC (default) or per
852 * interface (DPNI_OPT_SHARED_CONGESTION set at DPNI create).
853 * QUEUE_INDEX is ignored if this type is used.
854 */
855enum dpni_congestion_point {
856 DPNI_CP_QUEUE,
857 DPNI_CP_GROUP,
858};
859
860/**
861 * struct dpni_taildrop - Structure representing the taildrop
862 * @enable: Indicates whether the taildrop is active or not.
863 * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports
864 * byte units, this field is ignored and assumed = 0 if
865 * CONGESTION_POINT is 0.
866 * @threshold: Threshold value, in units identified by UNITS field. Value 0
867 * cannot be used as a valid taildrop threshold, THRESHOLD must
868 * be > 0 if the taildrop is enabled.
869 */
870struct dpni_taildrop {
871 char enable;
872 enum dpni_congestion_unit units;
873 u32 threshold;
874};
875
876int dpni_set_taildrop(struct fsl_mc_io *mc_io,
877 u32 cmd_flags,
878 u16 token,
879 enum dpni_congestion_point cg_point,
880 enum dpni_queue_type q_type,
881 u8 tc,
882 u8 q_index,
883 struct dpni_taildrop *taildrop);
884
885int dpni_get_taildrop(struct fsl_mc_io *mc_io,
886 u32 cmd_flags,
887 u16 token,
888 enum dpni_congestion_point cg_point,
889 enum dpni_queue_type q_type,
890 u8 tc,
891 u8 q_index,
892 struct dpni_taildrop *taildrop);
893
894/**
895 * struct dpni_rule_cfg - Rule configuration for table lookup
896 * @key_iova: I/O virtual address of the key (must be in DMA-able memory)
897 * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory)
898 * @key_size: key and mask size (in bytes)
899 */
900struct dpni_rule_cfg {
901 u64 key_iova;
902 u64 mask_iova;
903 u8 key_size;
904};
905
906/**
907 * Discard matching traffic. If set, this takes precedence over any other
908 * configuration and matching traffic is always discarded.
909 */
910 #define DPNI_FS_OPT_DISCARD 0x1
911
912/**
913 * Set FLC value. If set, flc member of struct dpni_fs_action_cfg is used to
914 * override the FLC value set per queue.
915 * For more details check the Frame Descriptor section in the hardware
916 * documentation.
917 */
918#define DPNI_FS_OPT_SET_FLC 0x2
919
920/**
921 * Indicates whether the 6 lowest significant bits of FLC are used for stash
922 * control. If set, the 6 least significant bits in value are interpreted as
923 * follows:
924 * - bits 0-1: indicates the number of 64 byte units of context that are
925 * stashed. FLC value is interpreted as a memory address in this case,
926 * excluding the 6 LS bits.
927 * - bits 2-3: indicates the number of 64 byte units of frame annotation
928 * to be stashed. Annotation is placed at FD[ADDR].
929 * - bits 4-5: indicates the number of 64 byte units of frame data to be
930 * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET].
931 * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified.
932 */
933#define DPNI_FS_OPT_SET_STASH_CONTROL 0x4
934
935/**
936 * struct dpni_fs_action_cfg - Action configuration for table look-up
937 * @flc: FLC value for traffic matching this rule. Please check the
938 * Frame Descriptor section in the hardware documentation for
939 * more information.
940 * @flow_id: Identifies the Rx queue used for matching traffic. Supported
941 * values are in range 0 to num_queue-1.
942 * @options: Any combination of DPNI_FS_OPT_ values.
943 */
944struct dpni_fs_action_cfg {
945 u64 flc;
946 u16 flow_id;
947 u16 options;
948};
949
950int dpni_add_fs_entry(struct fsl_mc_io *mc_io,
951 u32 cmd_flags,
952 u16 token,
953 u8 tc_id,
954 u16 index,
955 const struct dpni_rule_cfg *cfg,
956 const struct dpni_fs_action_cfg *action);
957
958int dpni_remove_fs_entry(struct fsl_mc_io *mc_io,
959 u32 cmd_flags,
960 u16 token,
961 u8 tc_id,
962 const struct dpni_rule_cfg *cfg);
963
964int dpni_get_api_version(struct fsl_mc_io *mc_io,
965 u32 cmd_flags,
966 u16 *major_ver,
967 u16 *minor_ver);
968
969#endif /* __FSL_DPNI_H */