b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * EEPROM parser code for mac80211 Prism54 drivers |
| 4 | * |
| 5 | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| 6 | * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> |
| 7 | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| 8 | * |
| 9 | * Based on: |
| 10 | * - the islsm (softmac prism54) driver, which is: |
| 11 | * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| 12 | * - stlc45xx driver |
| 13 | * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). |
| 14 | */ |
| 15 | |
| 16 | #include <linux/firmware.h> |
| 17 | #include <linux/etherdevice.h> |
| 18 | #include <linux/sort.h> |
| 19 | #include <linux/slab.h> |
| 20 | |
| 21 | #include <net/mac80211.h> |
| 22 | #include <linux/crc-ccitt.h> |
| 23 | #include <linux/export.h> |
| 24 | |
| 25 | #include "p54.h" |
| 26 | #include "eeprom.h" |
| 27 | #include "lmac.h" |
| 28 | |
| 29 | static struct ieee80211_rate p54_bgrates[] = { |
| 30 | { .bitrate = 10, .hw_value = 0, }, |
| 31 | { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 32 | { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 33 | { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 34 | { .bitrate = 60, .hw_value = 4, }, |
| 35 | { .bitrate = 90, .hw_value = 5, }, |
| 36 | { .bitrate = 120, .hw_value = 6, }, |
| 37 | { .bitrate = 180, .hw_value = 7, }, |
| 38 | { .bitrate = 240, .hw_value = 8, }, |
| 39 | { .bitrate = 360, .hw_value = 9, }, |
| 40 | { .bitrate = 480, .hw_value = 10, }, |
| 41 | { .bitrate = 540, .hw_value = 11, }, |
| 42 | }; |
| 43 | |
| 44 | static struct ieee80211_rate p54_arates[] = { |
| 45 | { .bitrate = 60, .hw_value = 4, }, |
| 46 | { .bitrate = 90, .hw_value = 5, }, |
| 47 | { .bitrate = 120, .hw_value = 6, }, |
| 48 | { .bitrate = 180, .hw_value = 7, }, |
| 49 | { .bitrate = 240, .hw_value = 8, }, |
| 50 | { .bitrate = 360, .hw_value = 9, }, |
| 51 | { .bitrate = 480, .hw_value = 10, }, |
| 52 | { .bitrate = 540, .hw_value = 11, }, |
| 53 | }; |
| 54 | |
| 55 | static struct p54_rssi_db_entry p54_rssi_default = { |
| 56 | /* |
| 57 | * The defaults are taken from usb-logs of the |
| 58 | * vendor driver. So, they should be safe to |
| 59 | * use in case we can't get a match from the |
| 60 | * rssi <-> dBm conversion database. |
| 61 | */ |
| 62 | .mul = 130, |
| 63 | .add = -398, |
| 64 | }; |
| 65 | |
| 66 | #define CHAN_HAS_CAL BIT(0) |
| 67 | #define CHAN_HAS_LIMIT BIT(1) |
| 68 | #define CHAN_HAS_CURVE BIT(2) |
| 69 | #define CHAN_HAS_ALL (CHAN_HAS_CAL | CHAN_HAS_LIMIT | CHAN_HAS_CURVE) |
| 70 | |
| 71 | struct p54_channel_entry { |
| 72 | u16 freq; |
| 73 | u16 data; |
| 74 | int index; |
| 75 | int max_power; |
| 76 | enum nl80211_band band; |
| 77 | }; |
| 78 | |
| 79 | struct p54_channel_list { |
| 80 | struct p54_channel_entry *channels; |
| 81 | size_t entries; |
| 82 | size_t max_entries; |
| 83 | size_t band_channel_num[NUM_NL80211_BANDS]; |
| 84 | }; |
| 85 | |
| 86 | static int p54_get_band_from_freq(u16 freq) |
| 87 | { |
| 88 | /* FIXME: sync these values with the 802.11 spec */ |
| 89 | |
| 90 | if ((freq >= 2412) && (freq <= 2484)) |
| 91 | return NL80211_BAND_2GHZ; |
| 92 | |
| 93 | if ((freq >= 4920) && (freq <= 5825)) |
| 94 | return NL80211_BAND_5GHZ; |
| 95 | |
| 96 | return -1; |
| 97 | } |
| 98 | |
| 99 | static int same_band(u16 freq, u16 freq2) |
| 100 | { |
| 101 | return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2); |
| 102 | } |
| 103 | |
| 104 | static int p54_compare_channels(const void *_a, |
| 105 | const void *_b) |
| 106 | { |
| 107 | const struct p54_channel_entry *a = _a; |
| 108 | const struct p54_channel_entry *b = _b; |
| 109 | |
| 110 | return a->freq - b->freq; |
| 111 | } |
| 112 | |
| 113 | static int p54_compare_rssichan(const void *_a, |
| 114 | const void *_b) |
| 115 | { |
| 116 | const struct p54_rssi_db_entry *a = _a; |
| 117 | const struct p54_rssi_db_entry *b = _b; |
| 118 | |
| 119 | return a->freq - b->freq; |
| 120 | } |
| 121 | |
| 122 | static int p54_fill_band_bitrates(struct ieee80211_hw *dev, |
| 123 | struct ieee80211_supported_band *band_entry, |
| 124 | enum nl80211_band band) |
| 125 | { |
| 126 | /* TODO: generate rate array dynamically */ |
| 127 | |
| 128 | switch (band) { |
| 129 | case NL80211_BAND_2GHZ: |
| 130 | band_entry->bitrates = p54_bgrates; |
| 131 | band_entry->n_bitrates = ARRAY_SIZE(p54_bgrates); |
| 132 | break; |
| 133 | case NL80211_BAND_5GHZ: |
| 134 | band_entry->bitrates = p54_arates; |
| 135 | band_entry->n_bitrates = ARRAY_SIZE(p54_arates); |
| 136 | break; |
| 137 | default: |
| 138 | return -EINVAL; |
| 139 | } |
| 140 | |
| 141 | return 0; |
| 142 | } |
| 143 | |
| 144 | static int p54_generate_band(struct ieee80211_hw *dev, |
| 145 | struct p54_channel_list *list, |
| 146 | unsigned int *chan_num, |
| 147 | enum nl80211_band band) |
| 148 | { |
| 149 | struct p54_common *priv = dev->priv; |
| 150 | struct ieee80211_supported_band *tmp, *old; |
| 151 | unsigned int i, j; |
| 152 | int ret = -ENOMEM; |
| 153 | |
| 154 | if ((!list->entries) || (!list->band_channel_num[band])) |
| 155 | return -EINVAL; |
| 156 | |
| 157 | tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); |
| 158 | if (!tmp) |
| 159 | goto err_out; |
| 160 | |
| 161 | tmp->channels = kcalloc(list->band_channel_num[band], |
| 162 | sizeof(struct ieee80211_channel), |
| 163 | GFP_KERNEL); |
| 164 | if (!tmp->channels) |
| 165 | goto err_out; |
| 166 | |
| 167 | ret = p54_fill_band_bitrates(dev, tmp, band); |
| 168 | if (ret) |
| 169 | goto err_out; |
| 170 | |
| 171 | for (i = 0, j = 0; (j < list->band_channel_num[band]) && |
| 172 | (i < list->entries); i++) { |
| 173 | struct p54_channel_entry *chan = &list->channels[i]; |
| 174 | struct ieee80211_channel *dest = &tmp->channels[j]; |
| 175 | |
| 176 | if (chan->band != band) |
| 177 | continue; |
| 178 | |
| 179 | if (chan->data != CHAN_HAS_ALL) { |
| 180 | wiphy_err(dev->wiphy, "%s%s%s is/are missing for " |
| 181 | "channel:%d [%d MHz].\n", |
| 182 | (chan->data & CHAN_HAS_CAL ? "" : |
| 183 | " [iqauto calibration data]"), |
| 184 | (chan->data & CHAN_HAS_LIMIT ? "" : |
| 185 | " [output power limits]"), |
| 186 | (chan->data & CHAN_HAS_CURVE ? "" : |
| 187 | " [curve data]"), |
| 188 | chan->index, chan->freq); |
| 189 | continue; |
| 190 | } |
| 191 | |
| 192 | dest->band = chan->band; |
| 193 | dest->center_freq = chan->freq; |
| 194 | dest->max_power = chan->max_power; |
| 195 | priv->survey[*chan_num].channel = &tmp->channels[j]; |
| 196 | priv->survey[*chan_num].filled = SURVEY_INFO_NOISE_DBM | |
| 197 | SURVEY_INFO_TIME | |
| 198 | SURVEY_INFO_TIME_BUSY | |
| 199 | SURVEY_INFO_TIME_TX; |
| 200 | dest->hw_value = (*chan_num); |
| 201 | j++; |
| 202 | (*chan_num)++; |
| 203 | } |
| 204 | |
| 205 | if (j == 0) { |
| 206 | wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n", |
| 207 | (band == NL80211_BAND_2GHZ) ? 2 : 5); |
| 208 | |
| 209 | ret = -ENODATA; |
| 210 | goto err_out; |
| 211 | } |
| 212 | |
| 213 | tmp->n_channels = j; |
| 214 | old = priv->band_table[band]; |
| 215 | priv->band_table[band] = tmp; |
| 216 | if (old) { |
| 217 | kfree(old->channels); |
| 218 | kfree(old); |
| 219 | } |
| 220 | |
| 221 | return 0; |
| 222 | |
| 223 | err_out: |
| 224 | if (tmp) { |
| 225 | kfree(tmp->channels); |
| 226 | kfree(tmp); |
| 227 | } |
| 228 | |
| 229 | return ret; |
| 230 | } |
| 231 | |
| 232 | static struct p54_channel_entry *p54_update_channel_param(struct p54_channel_list *list, |
| 233 | u16 freq, u16 data) |
| 234 | { |
| 235 | int i; |
| 236 | struct p54_channel_entry *entry = NULL; |
| 237 | |
| 238 | /* |
| 239 | * usually all lists in the eeprom are mostly sorted. |
| 240 | * so it's very likely that the entry we are looking for |
| 241 | * is right at the end of the list |
| 242 | */ |
| 243 | for (i = list->entries; i >= 0; i--) { |
| 244 | if (freq == list->channels[i].freq) { |
| 245 | entry = &list->channels[i]; |
| 246 | break; |
| 247 | } |
| 248 | } |
| 249 | |
| 250 | if ((i < 0) && (list->entries < list->max_entries)) { |
| 251 | /* entry does not exist yet. Initialize a new one. */ |
| 252 | int band = p54_get_band_from_freq(freq); |
| 253 | |
| 254 | /* |
| 255 | * filter out frequencies which don't belong into |
| 256 | * any supported band. |
| 257 | */ |
| 258 | if (band >= 0) { |
| 259 | i = list->entries++; |
| 260 | list->band_channel_num[band]++; |
| 261 | |
| 262 | entry = &list->channels[i]; |
| 263 | entry->freq = freq; |
| 264 | entry->band = band; |
| 265 | entry->index = ieee80211_frequency_to_channel(freq); |
| 266 | entry->max_power = 0; |
| 267 | entry->data = 0; |
| 268 | } |
| 269 | } |
| 270 | |
| 271 | if (entry) |
| 272 | entry->data |= data; |
| 273 | |
| 274 | return entry; |
| 275 | } |
| 276 | |
| 277 | static int p54_get_maxpower(struct p54_common *priv, void *data) |
| 278 | { |
| 279 | switch (priv->rxhw & PDR_SYNTH_FRONTEND_MASK) { |
| 280 | case PDR_SYNTH_FRONTEND_LONGBOW: { |
| 281 | struct pda_channel_output_limit_longbow *pda = data; |
| 282 | int j; |
| 283 | u16 rawpower = 0; |
| 284 | pda = data; |
| 285 | for (j = 0; j < ARRAY_SIZE(pda->point); j++) { |
| 286 | struct pda_channel_output_limit_point_longbow *point = |
| 287 | &pda->point[j]; |
| 288 | rawpower = max_t(u16, |
| 289 | rawpower, le16_to_cpu(point->val_qpsk)); |
| 290 | rawpower = max_t(u16, |
| 291 | rawpower, le16_to_cpu(point->val_bpsk)); |
| 292 | rawpower = max_t(u16, |
| 293 | rawpower, le16_to_cpu(point->val_16qam)); |
| 294 | rawpower = max_t(u16, |
| 295 | rawpower, le16_to_cpu(point->val_64qam)); |
| 296 | } |
| 297 | /* longbow seems to use 1/16 dBm units */ |
| 298 | return rawpower / 16; |
| 299 | } |
| 300 | |
| 301 | case PDR_SYNTH_FRONTEND_DUETTE3: |
| 302 | case PDR_SYNTH_FRONTEND_DUETTE2: |
| 303 | case PDR_SYNTH_FRONTEND_FRISBEE: |
| 304 | case PDR_SYNTH_FRONTEND_XBOW: { |
| 305 | struct pda_channel_output_limit *pda = data; |
| 306 | u8 rawpower = 0; |
| 307 | rawpower = max(rawpower, pda->val_qpsk); |
| 308 | rawpower = max(rawpower, pda->val_bpsk); |
| 309 | rawpower = max(rawpower, pda->val_16qam); |
| 310 | rawpower = max(rawpower, pda->val_64qam); |
| 311 | /* raw values are in 1/4 dBm units */ |
| 312 | return rawpower / 4; |
| 313 | } |
| 314 | |
| 315 | default: |
| 316 | return 20; |
| 317 | } |
| 318 | } |
| 319 | |
| 320 | static int p54_generate_channel_lists(struct ieee80211_hw *dev) |
| 321 | { |
| 322 | struct p54_common *priv = dev->priv; |
| 323 | struct p54_channel_list *list; |
| 324 | unsigned int i, j, k, max_channel_num; |
| 325 | int ret = 0; |
| 326 | u16 freq; |
| 327 | |
| 328 | if ((priv->iq_autocal_len != priv->curve_data->entries) || |
| 329 | (priv->iq_autocal_len != priv->output_limit->entries)) |
| 330 | wiphy_err(dev->wiphy, |
| 331 | "Unsupported or damaged EEPROM detected. " |
| 332 | "You may not be able to use all channels.\n"); |
| 333 | |
| 334 | max_channel_num = max_t(unsigned int, priv->output_limit->entries, |
| 335 | priv->iq_autocal_len); |
| 336 | max_channel_num = max_t(unsigned int, max_channel_num, |
| 337 | priv->curve_data->entries); |
| 338 | |
| 339 | list = kzalloc(sizeof(*list), GFP_KERNEL); |
| 340 | if (!list) { |
| 341 | ret = -ENOMEM; |
| 342 | goto free; |
| 343 | } |
| 344 | priv->chan_num = max_channel_num; |
| 345 | priv->survey = kcalloc(max_channel_num, sizeof(struct survey_info), |
| 346 | GFP_KERNEL); |
| 347 | if (!priv->survey) { |
| 348 | ret = -ENOMEM; |
| 349 | goto free; |
| 350 | } |
| 351 | |
| 352 | list->max_entries = max_channel_num; |
| 353 | list->channels = kcalloc(max_channel_num, |
| 354 | sizeof(struct p54_channel_entry), |
| 355 | GFP_KERNEL); |
| 356 | if (!list->channels) { |
| 357 | ret = -ENOMEM; |
| 358 | goto free; |
| 359 | } |
| 360 | |
| 361 | for (i = 0; i < max_channel_num; i++) { |
| 362 | if (i < priv->iq_autocal_len) { |
| 363 | freq = le16_to_cpu(priv->iq_autocal[i].freq); |
| 364 | p54_update_channel_param(list, freq, CHAN_HAS_CAL); |
| 365 | } |
| 366 | |
| 367 | if (i < priv->output_limit->entries) { |
| 368 | struct p54_channel_entry *tmp; |
| 369 | |
| 370 | void *data = (void *) ((unsigned long) i * |
| 371 | priv->output_limit->entry_size + |
| 372 | priv->output_limit->offset + |
| 373 | priv->output_limit->data); |
| 374 | |
| 375 | freq = le16_to_cpup((__le16 *) data); |
| 376 | tmp = p54_update_channel_param(list, freq, |
| 377 | CHAN_HAS_LIMIT); |
| 378 | if (tmp) { |
| 379 | tmp->max_power = p54_get_maxpower(priv, data); |
| 380 | } |
| 381 | } |
| 382 | |
| 383 | if (i < priv->curve_data->entries) { |
| 384 | freq = le16_to_cpup((__le16 *) (i * |
| 385 | priv->curve_data->entry_size + |
| 386 | priv->curve_data->offset + |
| 387 | priv->curve_data->data)); |
| 388 | |
| 389 | p54_update_channel_param(list, freq, CHAN_HAS_CURVE); |
| 390 | } |
| 391 | } |
| 392 | |
| 393 | /* sort the channel list by frequency */ |
| 394 | sort(list->channels, list->entries, sizeof(struct p54_channel_entry), |
| 395 | p54_compare_channels, NULL); |
| 396 | |
| 397 | k = 0; |
| 398 | for (i = 0, j = 0; i < NUM_NL80211_BANDS; i++) { |
| 399 | if (p54_generate_band(dev, list, &k, i) == 0) |
| 400 | j++; |
| 401 | } |
| 402 | if (j == 0) { |
| 403 | /* no useable band available. */ |
| 404 | ret = -EINVAL; |
| 405 | } |
| 406 | |
| 407 | free: |
| 408 | if (list) { |
| 409 | kfree(list->channels); |
| 410 | kfree(list); |
| 411 | } |
| 412 | if (ret) { |
| 413 | kfree(priv->survey); |
| 414 | priv->survey = NULL; |
| 415 | } |
| 416 | |
| 417 | return ret; |
| 418 | } |
| 419 | |
| 420 | static int p54_convert_rev0(struct ieee80211_hw *dev, |
| 421 | struct pda_pa_curve_data *curve_data) |
| 422 | { |
| 423 | struct p54_common *priv = dev->priv; |
| 424 | struct p54_pa_curve_data_sample *dst; |
| 425 | struct pda_pa_curve_data_sample_rev0 *src; |
| 426 | size_t cd_len = sizeof(*curve_data) + |
| 427 | (curve_data->points_per_channel*sizeof(*dst) + 2) * |
| 428 | curve_data->channels; |
| 429 | unsigned int i, j; |
| 430 | void *source, *target; |
| 431 | |
| 432 | priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len, |
| 433 | GFP_KERNEL); |
| 434 | if (!priv->curve_data) |
| 435 | return -ENOMEM; |
| 436 | |
| 437 | priv->curve_data->entries = curve_data->channels; |
| 438 | priv->curve_data->entry_size = sizeof(__le16) + |
| 439 | sizeof(*dst) * curve_data->points_per_channel; |
| 440 | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); |
| 441 | priv->curve_data->len = cd_len; |
| 442 | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); |
| 443 | source = curve_data->data; |
| 444 | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; |
| 445 | for (i = 0; i < curve_data->channels; i++) { |
| 446 | __le16 *freq = source; |
| 447 | source += sizeof(__le16); |
| 448 | *((__le16 *)target) = *freq; |
| 449 | target += sizeof(__le16); |
| 450 | for (j = 0; j < curve_data->points_per_channel; j++) { |
| 451 | dst = target; |
| 452 | src = source; |
| 453 | |
| 454 | dst->rf_power = src->rf_power; |
| 455 | dst->pa_detector = src->pa_detector; |
| 456 | dst->data_64qam = src->pcv; |
| 457 | /* "invent" the points for the other modulations */ |
| 458 | #define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y)) |
| 459 | dst->data_16qam = SUB(src->pcv, 12); |
| 460 | dst->data_qpsk = SUB(dst->data_16qam, 12); |
| 461 | dst->data_bpsk = SUB(dst->data_qpsk, 12); |
| 462 | dst->data_barker = SUB(dst->data_bpsk, 14); |
| 463 | #undef SUB |
| 464 | target += sizeof(*dst); |
| 465 | source += sizeof(*src); |
| 466 | } |
| 467 | } |
| 468 | |
| 469 | return 0; |
| 470 | } |
| 471 | |
| 472 | static int p54_convert_rev1(struct ieee80211_hw *dev, |
| 473 | struct pda_pa_curve_data *curve_data) |
| 474 | { |
| 475 | struct p54_common *priv = dev->priv; |
| 476 | struct p54_pa_curve_data_sample *dst; |
| 477 | struct pda_pa_curve_data_sample_rev1 *src; |
| 478 | size_t cd_len = sizeof(*curve_data) + |
| 479 | (curve_data->points_per_channel*sizeof(*dst) + 2) * |
| 480 | curve_data->channels; |
| 481 | unsigned int i, j; |
| 482 | void *source, *target; |
| 483 | |
| 484 | priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data), |
| 485 | GFP_KERNEL); |
| 486 | if (!priv->curve_data) |
| 487 | return -ENOMEM; |
| 488 | |
| 489 | priv->curve_data->entries = curve_data->channels; |
| 490 | priv->curve_data->entry_size = sizeof(__le16) + |
| 491 | sizeof(*dst) * curve_data->points_per_channel; |
| 492 | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); |
| 493 | priv->curve_data->len = cd_len; |
| 494 | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); |
| 495 | source = curve_data->data; |
| 496 | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; |
| 497 | for (i = 0; i < curve_data->channels; i++) { |
| 498 | __le16 *freq = source; |
| 499 | source += sizeof(__le16); |
| 500 | *((__le16 *)target) = *freq; |
| 501 | target += sizeof(__le16); |
| 502 | for (j = 0; j < curve_data->points_per_channel; j++) { |
| 503 | memcpy(target, source, sizeof(*src)); |
| 504 | |
| 505 | target += sizeof(*dst); |
| 506 | source += sizeof(*src); |
| 507 | } |
| 508 | source++; |
| 509 | } |
| 510 | |
| 511 | return 0; |
| 512 | } |
| 513 | |
| 514 | static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2", |
| 515 | "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" }; |
| 516 | |
| 517 | static int p54_parse_rssical(struct ieee80211_hw *dev, |
| 518 | u8 *data, int len, u16 type) |
| 519 | { |
| 520 | struct p54_common *priv = dev->priv; |
| 521 | struct p54_rssi_db_entry *entry; |
| 522 | size_t db_len, entries; |
| 523 | int offset = 0, i; |
| 524 | |
| 525 | if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { |
| 526 | entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2; |
| 527 | if (len != sizeof(struct pda_rssi_cal_entry) * entries) { |
| 528 | wiphy_err(dev->wiphy, "rssical size mismatch.\n"); |
| 529 | goto err_data; |
| 530 | } |
| 531 | } else { |
| 532 | /* |
| 533 | * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...) |
| 534 | * have an empty two byte header. |
| 535 | */ |
| 536 | if (*((__le16 *)&data[offset]) == cpu_to_le16(0)) |
| 537 | offset += 2; |
| 538 | |
| 539 | entries = (len - offset) / |
| 540 | sizeof(struct pda_rssi_cal_ext_entry); |
| 541 | |
| 542 | if (len < offset || |
| 543 | (len - offset) % sizeof(struct pda_rssi_cal_ext_entry) || |
| 544 | entries == 0) { |
| 545 | wiphy_err(dev->wiphy, "invalid rssi database.\n"); |
| 546 | goto err_data; |
| 547 | } |
| 548 | } |
| 549 | |
| 550 | db_len = sizeof(*entry) * entries; |
| 551 | priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL); |
| 552 | if (!priv->rssi_db) |
| 553 | return -ENOMEM; |
| 554 | |
| 555 | priv->rssi_db->offset = 0; |
| 556 | priv->rssi_db->entries = entries; |
| 557 | priv->rssi_db->entry_size = sizeof(*entry); |
| 558 | priv->rssi_db->len = db_len; |
| 559 | |
| 560 | entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset); |
| 561 | if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { |
| 562 | struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset]; |
| 563 | |
| 564 | for (i = 0; i < entries; i++) { |
| 565 | entry[i].freq = le16_to_cpu(cal[i].freq); |
| 566 | entry[i].mul = (s16) le16_to_cpu(cal[i].mul); |
| 567 | entry[i].add = (s16) le16_to_cpu(cal[i].add); |
| 568 | } |
| 569 | } else { |
| 570 | struct pda_rssi_cal_entry *cal = (void *) &data[offset]; |
| 571 | |
| 572 | for (i = 0; i < entries; i++) { |
| 573 | u16 freq = 0; |
| 574 | switch (i) { |
| 575 | case NL80211_BAND_2GHZ: |
| 576 | freq = 2437; |
| 577 | break; |
| 578 | case NL80211_BAND_5GHZ: |
| 579 | freq = 5240; |
| 580 | break; |
| 581 | } |
| 582 | |
| 583 | entry[i].freq = freq; |
| 584 | entry[i].mul = (s16) le16_to_cpu(cal[i].mul); |
| 585 | entry[i].add = (s16) le16_to_cpu(cal[i].add); |
| 586 | } |
| 587 | } |
| 588 | |
| 589 | /* sort the list by channel frequency */ |
| 590 | sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL); |
| 591 | return 0; |
| 592 | |
| 593 | err_data: |
| 594 | wiphy_err(dev->wiphy, |
| 595 | "rssi calibration data packing type:(%x) len:%d.\n", |
| 596 | type, len); |
| 597 | |
| 598 | print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len); |
| 599 | |
| 600 | wiphy_err(dev->wiphy, "please report this issue.\n"); |
| 601 | return -EINVAL; |
| 602 | } |
| 603 | |
| 604 | struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq) |
| 605 | { |
| 606 | struct p54_rssi_db_entry *entry; |
| 607 | int i, found = -1; |
| 608 | |
| 609 | if (!priv->rssi_db) |
| 610 | return &p54_rssi_default; |
| 611 | |
| 612 | entry = (void *)(priv->rssi_db->data + priv->rssi_db->offset); |
| 613 | for (i = 0; i < priv->rssi_db->entries; i++) { |
| 614 | if (!same_band(freq, entry[i].freq)) |
| 615 | continue; |
| 616 | |
| 617 | if (found == -1) { |
| 618 | found = i; |
| 619 | continue; |
| 620 | } |
| 621 | |
| 622 | /* nearest match */ |
| 623 | if (abs(freq - entry[i].freq) < |
| 624 | abs(freq - entry[found].freq)) { |
| 625 | found = i; |
| 626 | continue; |
| 627 | } else { |
| 628 | break; |
| 629 | } |
| 630 | } |
| 631 | |
| 632 | return found < 0 ? &p54_rssi_default : &entry[found]; |
| 633 | } |
| 634 | |
| 635 | static void p54_parse_default_country(struct ieee80211_hw *dev, |
| 636 | void *data, int len) |
| 637 | { |
| 638 | struct pda_country *country; |
| 639 | |
| 640 | if (len != sizeof(*country)) { |
| 641 | wiphy_err(dev->wiphy, |
| 642 | "found possible invalid default country eeprom entry. (entry size: %d)\n", |
| 643 | len); |
| 644 | |
| 645 | print_hex_dump_bytes("country:", DUMP_PREFIX_NONE, |
| 646 | data, len); |
| 647 | |
| 648 | wiphy_err(dev->wiphy, "please report this issue.\n"); |
| 649 | return; |
| 650 | } |
| 651 | |
| 652 | country = (struct pda_country *) data; |
| 653 | if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO) |
| 654 | regulatory_hint(dev->wiphy, country->alpha2); |
| 655 | else { |
| 656 | /* TODO: |
| 657 | * write a shared/common function that converts |
| 658 | * "Regulatory domain codes" (802.11-2007 14.8.2.2) |
| 659 | * into ISO/IEC 3166-1 alpha2 for regulatory_hint. |
| 660 | */ |
| 661 | } |
| 662 | } |
| 663 | |
| 664 | static int p54_convert_output_limits(struct ieee80211_hw *dev, |
| 665 | u8 *data, size_t len) |
| 666 | { |
| 667 | struct p54_common *priv = dev->priv; |
| 668 | |
| 669 | if (len < 2) |
| 670 | return -EINVAL; |
| 671 | |
| 672 | if (data[0] != 0) { |
| 673 | wiphy_err(dev->wiphy, "unknown output power db revision:%x\n", |
| 674 | data[0]); |
| 675 | return -EINVAL; |
| 676 | } |
| 677 | |
| 678 | if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len) |
| 679 | return -EINVAL; |
| 680 | |
| 681 | priv->output_limit = kmalloc(data[1] * |
| 682 | sizeof(struct pda_channel_output_limit) + |
| 683 | sizeof(*priv->output_limit), GFP_KERNEL); |
| 684 | |
| 685 | if (!priv->output_limit) |
| 686 | return -ENOMEM; |
| 687 | |
| 688 | priv->output_limit->offset = 0; |
| 689 | priv->output_limit->entries = data[1]; |
| 690 | priv->output_limit->entry_size = |
| 691 | sizeof(struct pda_channel_output_limit); |
| 692 | priv->output_limit->len = priv->output_limit->entry_size * |
| 693 | priv->output_limit->entries + |
| 694 | priv->output_limit->offset; |
| 695 | |
| 696 | memcpy(priv->output_limit->data, &data[2], |
| 697 | data[1] * sizeof(struct pda_channel_output_limit)); |
| 698 | |
| 699 | return 0; |
| 700 | } |
| 701 | |
| 702 | static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src, |
| 703 | size_t total_len) |
| 704 | { |
| 705 | struct p54_cal_database *dst; |
| 706 | size_t payload_len, entries, entry_size, offset; |
| 707 | |
| 708 | payload_len = le16_to_cpu(src->len); |
| 709 | entries = le16_to_cpu(src->entries); |
| 710 | entry_size = le16_to_cpu(src->entry_size); |
| 711 | offset = le16_to_cpu(src->offset); |
| 712 | if (((entries * entry_size + offset) != payload_len) || |
| 713 | (payload_len + sizeof(*src) != total_len)) |
| 714 | return NULL; |
| 715 | |
| 716 | dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL); |
| 717 | if (!dst) |
| 718 | return NULL; |
| 719 | |
| 720 | dst->entries = entries; |
| 721 | dst->entry_size = entry_size; |
| 722 | dst->offset = offset; |
| 723 | dst->len = payload_len; |
| 724 | |
| 725 | memcpy(dst->data, src->data, payload_len); |
| 726 | return dst; |
| 727 | } |
| 728 | |
| 729 | int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) |
| 730 | { |
| 731 | struct p54_common *priv = dev->priv; |
| 732 | struct eeprom_pda_wrap *wrap; |
| 733 | struct pda_entry *entry; |
| 734 | unsigned int data_len, entry_len; |
| 735 | void *tmp; |
| 736 | int err; |
| 737 | u8 *end = (u8 *)eeprom + len; |
| 738 | u16 synth = 0; |
| 739 | u16 crc16 = ~0; |
| 740 | |
| 741 | wrap = (struct eeprom_pda_wrap *) eeprom; |
| 742 | entry = (void *)wrap->data + le16_to_cpu(wrap->len); |
| 743 | |
| 744 | /* verify that at least the entry length/code fits */ |
| 745 | while ((u8 *)entry <= end - sizeof(*entry)) { |
| 746 | entry_len = le16_to_cpu(entry->len); |
| 747 | data_len = ((entry_len - 1) << 1); |
| 748 | |
| 749 | /* abort if entry exceeds whole structure */ |
| 750 | if ((u8 *)entry + sizeof(*entry) + data_len > end) |
| 751 | break; |
| 752 | |
| 753 | switch (le16_to_cpu(entry->code)) { |
| 754 | case PDR_MAC_ADDRESS: |
| 755 | if (data_len != ETH_ALEN) |
| 756 | break; |
| 757 | SET_IEEE80211_PERM_ADDR(dev, entry->data); |
| 758 | break; |
| 759 | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: |
| 760 | if (priv->output_limit) |
| 761 | break; |
| 762 | err = p54_convert_output_limits(dev, entry->data, |
| 763 | data_len); |
| 764 | if (err) |
| 765 | goto err; |
| 766 | break; |
| 767 | case PDR_PRISM_PA_CAL_CURVE_DATA: { |
| 768 | struct pda_pa_curve_data *curve_data = |
| 769 | (struct pda_pa_curve_data *)entry->data; |
| 770 | if (data_len < sizeof(*curve_data)) { |
| 771 | err = -EINVAL; |
| 772 | goto err; |
| 773 | } |
| 774 | |
| 775 | switch (curve_data->cal_method_rev) { |
| 776 | case 0: |
| 777 | err = p54_convert_rev0(dev, curve_data); |
| 778 | break; |
| 779 | case 1: |
| 780 | err = p54_convert_rev1(dev, curve_data); |
| 781 | break; |
| 782 | default: |
| 783 | wiphy_err(dev->wiphy, |
| 784 | "unknown curve data revision %d\n", |
| 785 | curve_data->cal_method_rev); |
| 786 | err = -ENODEV; |
| 787 | break; |
| 788 | } |
| 789 | if (err) |
| 790 | goto err; |
| 791 | } |
| 792 | break; |
| 793 | case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: |
| 794 | priv->iq_autocal = kmemdup(entry->data, data_len, |
| 795 | GFP_KERNEL); |
| 796 | if (!priv->iq_autocal) { |
| 797 | err = -ENOMEM; |
| 798 | goto err; |
| 799 | } |
| 800 | |
| 801 | priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); |
| 802 | break; |
| 803 | case PDR_DEFAULT_COUNTRY: |
| 804 | p54_parse_default_country(dev, entry->data, data_len); |
| 805 | break; |
| 806 | case PDR_INTERFACE_LIST: |
| 807 | tmp = entry->data; |
| 808 | while ((u8 *)tmp < entry->data + data_len) { |
| 809 | struct exp_if *exp_if = tmp; |
| 810 | if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000)) |
| 811 | synth = le16_to_cpu(exp_if->variant); |
| 812 | tmp += sizeof(*exp_if); |
| 813 | } |
| 814 | break; |
| 815 | case PDR_HARDWARE_PLATFORM_COMPONENT_ID: |
| 816 | if (data_len < 2) |
| 817 | break; |
| 818 | priv->version = *(u8 *)(entry->data + 1); |
| 819 | break; |
| 820 | case PDR_RSSI_LINEAR_APPROXIMATION: |
| 821 | case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND: |
| 822 | case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED: |
| 823 | err = p54_parse_rssical(dev, entry->data, data_len, |
| 824 | le16_to_cpu(entry->code)); |
| 825 | if (err) |
| 826 | goto err; |
| 827 | break; |
| 828 | case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: { |
| 829 | struct pda_custom_wrapper *pda = (void *) entry->data; |
| 830 | __le16 *src; |
| 831 | u16 *dst; |
| 832 | int i; |
| 833 | |
| 834 | if (priv->rssi_db || data_len < sizeof(*pda)) |
| 835 | break; |
| 836 | |
| 837 | priv->rssi_db = p54_convert_db(pda, data_len); |
| 838 | if (!priv->rssi_db) |
| 839 | break; |
| 840 | |
| 841 | src = (void *) priv->rssi_db->data; |
| 842 | dst = (void *) priv->rssi_db->data; |
| 843 | |
| 844 | for (i = 0; i < priv->rssi_db->entries; i++) |
| 845 | *(dst++) = (s16) le16_to_cpu(*(src++)); |
| 846 | |
| 847 | } |
| 848 | break; |
| 849 | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: { |
| 850 | struct pda_custom_wrapper *pda = (void *) entry->data; |
| 851 | if (priv->output_limit || data_len < sizeof(*pda)) |
| 852 | break; |
| 853 | priv->output_limit = p54_convert_db(pda, data_len); |
| 854 | } |
| 855 | break; |
| 856 | case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: { |
| 857 | struct pda_custom_wrapper *pda = (void *) entry->data; |
| 858 | if (priv->curve_data || data_len < sizeof(*pda)) |
| 859 | break; |
| 860 | priv->curve_data = p54_convert_db(pda, data_len); |
| 861 | } |
| 862 | break; |
| 863 | case PDR_END: |
| 864 | crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry)); |
| 865 | if (crc16 != le16_to_cpup((__le16 *)entry->data)) { |
| 866 | wiphy_err(dev->wiphy, "eeprom failed checksum " |
| 867 | "test!\n"); |
| 868 | err = -ENOMSG; |
| 869 | goto err; |
| 870 | } else { |
| 871 | goto good_eeprom; |
| 872 | } |
| 873 | break; |
| 874 | default: |
| 875 | break; |
| 876 | } |
| 877 | |
| 878 | crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2); |
| 879 | entry = (void *)entry + (entry_len + 1) * 2; |
| 880 | } |
| 881 | |
| 882 | wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n"); |
| 883 | err = -ENODATA; |
| 884 | goto err; |
| 885 | |
| 886 | good_eeprom: |
| 887 | if (!synth || !priv->iq_autocal || !priv->output_limit || |
| 888 | !priv->curve_data) { |
| 889 | wiphy_err(dev->wiphy, |
| 890 | "not all required entries found in eeprom!\n"); |
| 891 | err = -EINVAL; |
| 892 | goto err; |
| 893 | } |
| 894 | |
| 895 | priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK; |
| 896 | |
| 897 | err = p54_generate_channel_lists(dev); |
| 898 | if (err) |
| 899 | goto err; |
| 900 | |
| 901 | if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW) |
| 902 | p54_init_xbow_synth(priv); |
| 903 | if (!(synth & PDR_SYNTH_24_GHZ_DISABLED)) |
| 904 | dev->wiphy->bands[NL80211_BAND_2GHZ] = |
| 905 | priv->band_table[NL80211_BAND_2GHZ]; |
| 906 | if (!(synth & PDR_SYNTH_5_GHZ_DISABLED)) |
| 907 | dev->wiphy->bands[NL80211_BAND_5GHZ] = |
| 908 | priv->band_table[NL80211_BAND_5GHZ]; |
| 909 | if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED) |
| 910 | priv->rx_diversity_mask = 3; |
| 911 | if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED) |
| 912 | priv->tx_diversity_mask = 3; |
| 913 | |
| 914 | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { |
| 915 | u8 perm_addr[ETH_ALEN]; |
| 916 | |
| 917 | wiphy_warn(dev->wiphy, |
| 918 | "Invalid hwaddr! Using randomly generated MAC addr\n"); |
| 919 | eth_random_addr(perm_addr); |
| 920 | SET_IEEE80211_PERM_ADDR(dev, perm_addr); |
| 921 | } |
| 922 | |
| 923 | priv->cur_rssi = &p54_rssi_default; |
| 924 | |
| 925 | wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n", |
| 926 | dev->wiphy->perm_addr, priv->version, |
| 927 | p54_rf_chips[priv->rxhw]); |
| 928 | |
| 929 | return 0; |
| 930 | |
| 931 | err: |
| 932 | kfree(priv->iq_autocal); |
| 933 | kfree(priv->output_limit); |
| 934 | kfree(priv->curve_data); |
| 935 | kfree(priv->rssi_db); |
| 936 | kfree(priv->survey); |
| 937 | priv->iq_autocal = NULL; |
| 938 | priv->output_limit = NULL; |
| 939 | priv->curve_data = NULL; |
| 940 | priv->rssi_db = NULL; |
| 941 | priv->survey = NULL; |
| 942 | |
| 943 | wiphy_err(dev->wiphy, "eeprom parse failed!\n"); |
| 944 | return err; |
| 945 | } |
| 946 | EXPORT_SYMBOL_GPL(p54_parse_eeprom); |
| 947 | |
| 948 | int p54_read_eeprom(struct ieee80211_hw *dev) |
| 949 | { |
| 950 | struct p54_common *priv = dev->priv; |
| 951 | size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize; |
| 952 | int ret = -ENOMEM; |
| 953 | void *eeprom; |
| 954 | |
| 955 | maxblocksize = EEPROM_READBACK_LEN; |
| 956 | if (priv->fw_var >= 0x509) |
| 957 | maxblocksize -= 0xc; |
| 958 | else |
| 959 | maxblocksize -= 0x4; |
| 960 | |
| 961 | eeprom = kzalloc(eeprom_size, GFP_KERNEL); |
| 962 | if (unlikely(!eeprom)) |
| 963 | goto free; |
| 964 | |
| 965 | while (eeprom_size) { |
| 966 | blocksize = min(eeprom_size, maxblocksize); |
| 967 | ret = p54_download_eeprom(priv, eeprom + offset, |
| 968 | offset, blocksize); |
| 969 | if (unlikely(ret)) |
| 970 | goto free; |
| 971 | |
| 972 | offset += blocksize; |
| 973 | eeprom_size -= blocksize; |
| 974 | } |
| 975 | |
| 976 | ret = p54_parse_eeprom(dev, eeprom, offset); |
| 977 | free: |
| 978 | kfree(eeprom); |
| 979 | return ret; |
| 980 | } |
| 981 | EXPORT_SYMBOL_GPL(p54_read_eeprom); |