b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> |
| 4 | <http://rt2x00.serialmonkey.com> |
| 5 | |
| 6 | */ |
| 7 | |
| 8 | /* |
| 9 | Module: rt2x00pci |
| 10 | Abstract: rt2x00 generic pci device routines. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/dma-mapping.h> |
| 14 | #include <linux/kernel.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/pci.h> |
| 17 | #include <linux/slab.h> |
| 18 | |
| 19 | #include "rt2x00.h" |
| 20 | #include "rt2x00pci.h" |
| 21 | |
| 22 | /* |
| 23 | * PCI driver handlers. |
| 24 | */ |
| 25 | static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) |
| 26 | { |
| 27 | kfree(rt2x00dev->rf); |
| 28 | rt2x00dev->rf = NULL; |
| 29 | |
| 30 | kfree(rt2x00dev->eeprom); |
| 31 | rt2x00dev->eeprom = NULL; |
| 32 | |
| 33 | if (rt2x00dev->csr.base) { |
| 34 | iounmap(rt2x00dev->csr.base); |
| 35 | rt2x00dev->csr.base = NULL; |
| 36 | } |
| 37 | } |
| 38 | |
| 39 | static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) |
| 40 | { |
| 41 | struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); |
| 42 | |
| 43 | rt2x00dev->csr.base = pci_ioremap_bar(pci_dev, 0); |
| 44 | if (!rt2x00dev->csr.base) |
| 45 | goto exit; |
| 46 | |
| 47 | rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); |
| 48 | if (!rt2x00dev->eeprom) |
| 49 | goto exit; |
| 50 | |
| 51 | rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); |
| 52 | if (!rt2x00dev->rf) |
| 53 | goto exit; |
| 54 | |
| 55 | return 0; |
| 56 | |
| 57 | exit: |
| 58 | rt2x00_probe_err("Failed to allocate registers\n"); |
| 59 | |
| 60 | rt2x00pci_free_reg(rt2x00dev); |
| 61 | |
| 62 | return -ENOMEM; |
| 63 | } |
| 64 | |
| 65 | int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) |
| 66 | { |
| 67 | struct ieee80211_hw *hw; |
| 68 | struct rt2x00_dev *rt2x00dev; |
| 69 | int retval; |
| 70 | u16 chip; |
| 71 | |
| 72 | retval = pci_enable_device(pci_dev); |
| 73 | if (retval) { |
| 74 | rt2x00_probe_err("Enable device failed\n"); |
| 75 | return retval; |
| 76 | } |
| 77 | |
| 78 | retval = pci_request_regions(pci_dev, pci_name(pci_dev)); |
| 79 | if (retval) { |
| 80 | rt2x00_probe_err("PCI request regions failed\n"); |
| 81 | goto exit_disable_device; |
| 82 | } |
| 83 | |
| 84 | pci_set_master(pci_dev); |
| 85 | |
| 86 | if (pci_set_mwi(pci_dev)) |
| 87 | rt2x00_probe_err("MWI not available\n"); |
| 88 | |
| 89 | if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) { |
| 90 | rt2x00_probe_err("PCI DMA not supported\n"); |
| 91 | retval = -EIO; |
| 92 | goto exit_release_regions; |
| 93 | } |
| 94 | |
| 95 | hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); |
| 96 | if (!hw) { |
| 97 | rt2x00_probe_err("Failed to allocate hardware\n"); |
| 98 | retval = -ENOMEM; |
| 99 | goto exit_release_regions; |
| 100 | } |
| 101 | |
| 102 | pci_set_drvdata(pci_dev, hw); |
| 103 | |
| 104 | rt2x00dev = hw->priv; |
| 105 | rt2x00dev->dev = &pci_dev->dev; |
| 106 | rt2x00dev->ops = ops; |
| 107 | rt2x00dev->hw = hw; |
| 108 | rt2x00dev->irq = pci_dev->irq; |
| 109 | rt2x00dev->name = ops->name; |
| 110 | |
| 111 | if (pci_is_pcie(pci_dev)) |
| 112 | rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE); |
| 113 | else |
| 114 | rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); |
| 115 | |
| 116 | retval = rt2x00pci_alloc_reg(rt2x00dev); |
| 117 | if (retval) |
| 118 | goto exit_free_device; |
| 119 | |
| 120 | /* |
| 121 | * Because rt3290 chip use different efuse offset to read efuse data. |
| 122 | * So before read efuse it need to indicate it is the |
| 123 | * rt3290 or not. |
| 124 | */ |
| 125 | pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip); |
| 126 | rt2x00dev->chip.rt = chip; |
| 127 | |
| 128 | retval = rt2x00lib_probe_dev(rt2x00dev); |
| 129 | if (retval) |
| 130 | goto exit_free_reg; |
| 131 | |
| 132 | return 0; |
| 133 | |
| 134 | exit_free_reg: |
| 135 | rt2x00pci_free_reg(rt2x00dev); |
| 136 | |
| 137 | exit_free_device: |
| 138 | ieee80211_free_hw(hw); |
| 139 | |
| 140 | exit_release_regions: |
| 141 | pci_clear_mwi(pci_dev); |
| 142 | pci_release_regions(pci_dev); |
| 143 | |
| 144 | exit_disable_device: |
| 145 | pci_disable_device(pci_dev); |
| 146 | |
| 147 | return retval; |
| 148 | } |
| 149 | EXPORT_SYMBOL_GPL(rt2x00pci_probe); |
| 150 | |
| 151 | void rt2x00pci_remove(struct pci_dev *pci_dev) |
| 152 | { |
| 153 | struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); |
| 154 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 155 | |
| 156 | /* |
| 157 | * Free all allocated data. |
| 158 | */ |
| 159 | rt2x00lib_remove_dev(rt2x00dev); |
| 160 | rt2x00pci_free_reg(rt2x00dev); |
| 161 | ieee80211_free_hw(hw); |
| 162 | |
| 163 | /* |
| 164 | * Free the PCI device data. |
| 165 | */ |
| 166 | pci_clear_mwi(pci_dev); |
| 167 | pci_disable_device(pci_dev); |
| 168 | pci_release_regions(pci_dev); |
| 169 | } |
| 170 | EXPORT_SYMBOL_GPL(rt2x00pci_remove); |
| 171 | |
| 172 | #ifdef CONFIG_PM |
| 173 | int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| 174 | { |
| 175 | struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); |
| 176 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 177 | int retval; |
| 178 | |
| 179 | retval = rt2x00lib_suspend(rt2x00dev, state); |
| 180 | if (retval) |
| 181 | return retval; |
| 182 | |
| 183 | pci_save_state(pci_dev); |
| 184 | pci_disable_device(pci_dev); |
| 185 | return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); |
| 186 | } |
| 187 | EXPORT_SYMBOL_GPL(rt2x00pci_suspend); |
| 188 | |
| 189 | int rt2x00pci_resume(struct pci_dev *pci_dev) |
| 190 | { |
| 191 | struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); |
| 192 | struct rt2x00_dev *rt2x00dev = hw->priv; |
| 193 | |
| 194 | if (pci_set_power_state(pci_dev, PCI_D0) || |
| 195 | pci_enable_device(pci_dev)) { |
| 196 | rt2x00_err(rt2x00dev, "Failed to resume device\n"); |
| 197 | return -EIO; |
| 198 | } |
| 199 | |
| 200 | pci_restore_state(pci_dev); |
| 201 | return rt2x00lib_resume(rt2x00dev); |
| 202 | } |
| 203 | EXPORT_SYMBOL_GPL(rt2x00pci_resume); |
| 204 | #endif /* CONFIG_PM */ |
| 205 | |
| 206 | /* |
| 207 | * rt2x00pci module information. |
| 208 | */ |
| 209 | MODULE_AUTHOR(DRV_PROJECT); |
| 210 | MODULE_VERSION(DRV_VERSION); |
| 211 | MODULE_DESCRIPTION("rt2x00 pci library"); |
| 212 | MODULE_LICENSE("GPL"); |