b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * pps-gpio.c -- PPS client driver using GPIO |
| 4 | * |
| 5 | * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt> |
| 6 | * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca> |
| 7 | */ |
| 8 | |
| 9 | #define PPS_GPIO_NAME "pps-gpio" |
| 10 | #define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt |
| 11 | |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/kernel.h> |
| 14 | #include <linux/interrupt.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/slab.h> |
| 18 | #include <linux/pps_kernel.h> |
| 19 | #include <linux/pps-gpio.h> |
| 20 | #include <linux/gpio/consumer.h> |
| 21 | #include <linux/list.h> |
| 22 | #include <linux/of_device.h> |
| 23 | #include <linux/of_gpio.h> |
| 24 | #include <linux/timer.h> |
| 25 | #include <linux/jiffies.h> |
| 26 | |
| 27 | /* Info for each registered platform device */ |
| 28 | struct pps_gpio_device_data { |
| 29 | int irq; /* IRQ used as PPS source */ |
| 30 | struct pps_device *pps; /* PPS source device */ |
| 31 | struct pps_source_info info; /* PPS source information */ |
| 32 | struct gpio_desc *gpio_pin; /* GPIO port descriptors */ |
| 33 | struct gpio_desc *echo_pin; |
| 34 | struct timer_list echo_timer; /* timer to reset echo active state */ |
| 35 | bool assert_falling_edge; |
| 36 | bool capture_clear; |
| 37 | unsigned int echo_active_ms; /* PPS echo active duration */ |
| 38 | unsigned long echo_timeout; /* timer timeout value in jiffies */ |
| 39 | }; |
| 40 | |
| 41 | /* |
| 42 | * Report the PPS event |
| 43 | */ |
| 44 | |
| 45 | static irqreturn_t pps_gpio_irq_handler(int irq, void *data) |
| 46 | { |
| 47 | const struct pps_gpio_device_data *info; |
| 48 | struct pps_event_time ts; |
| 49 | int rising_edge; |
| 50 | |
| 51 | /* Get the time stamp first */ |
| 52 | pps_get_ts(&ts); |
| 53 | |
| 54 | info = data; |
| 55 | |
| 56 | rising_edge = gpiod_get_value(info->gpio_pin); |
| 57 | if ((rising_edge && !info->assert_falling_edge) || |
| 58 | (!rising_edge && info->assert_falling_edge)) |
| 59 | pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data); |
| 60 | else if (info->capture_clear && |
| 61 | ((rising_edge && info->assert_falling_edge) || |
| 62 | (!rising_edge && !info->assert_falling_edge))) |
| 63 | pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data); |
| 64 | |
| 65 | return IRQ_HANDLED; |
| 66 | } |
| 67 | |
| 68 | /* This function will only be called when an ECHO GPIO is defined */ |
| 69 | static void pps_gpio_echo(struct pps_device *pps, int event, void *data) |
| 70 | { |
| 71 | /* add_timer() needs to write into info->echo_timer */ |
| 72 | struct pps_gpio_device_data *info = data; |
| 73 | |
| 74 | switch (event) { |
| 75 | case PPS_CAPTUREASSERT: |
| 76 | if (pps->params.mode & PPS_ECHOASSERT) |
| 77 | gpiod_set_value(info->echo_pin, 1); |
| 78 | break; |
| 79 | |
| 80 | case PPS_CAPTURECLEAR: |
| 81 | if (pps->params.mode & PPS_ECHOCLEAR) |
| 82 | gpiod_set_value(info->echo_pin, 1); |
| 83 | break; |
| 84 | } |
| 85 | |
| 86 | /* fire the timer */ |
| 87 | if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) { |
| 88 | info->echo_timer.expires = jiffies + info->echo_timeout; |
| 89 | add_timer(&info->echo_timer); |
| 90 | } |
| 91 | } |
| 92 | |
| 93 | /* Timer callback to reset the echo pin to the inactive state */ |
| 94 | static void pps_gpio_echo_timer_callback(struct timer_list *t) |
| 95 | { |
| 96 | const struct pps_gpio_device_data *info; |
| 97 | |
| 98 | info = from_timer(info, t, echo_timer); |
| 99 | |
| 100 | gpiod_set_value(info->echo_pin, 0); |
| 101 | } |
| 102 | |
| 103 | static int pps_gpio_setup(struct platform_device *pdev) |
| 104 | { |
| 105 | struct pps_gpio_device_data *data = platform_get_drvdata(pdev); |
| 106 | struct device_node *np = pdev->dev.of_node; |
| 107 | int ret; |
| 108 | u32 value; |
| 109 | |
| 110 | data->gpio_pin = devm_gpiod_get(&pdev->dev, |
| 111 | NULL, /* request "gpios" */ |
| 112 | GPIOD_IN); |
| 113 | if (IS_ERR(data->gpio_pin)) { |
| 114 | dev_err(&pdev->dev, |
| 115 | "failed to request PPS GPIO\n"); |
| 116 | return PTR_ERR(data->gpio_pin); |
| 117 | } |
| 118 | |
| 119 | data->echo_pin = devm_gpiod_get_optional(&pdev->dev, |
| 120 | "echo", |
| 121 | GPIOD_OUT_LOW); |
| 122 | if (data->echo_pin) { |
| 123 | if (IS_ERR(data->echo_pin)) { |
| 124 | dev_err(&pdev->dev, "failed to request ECHO GPIO\n"); |
| 125 | return PTR_ERR(data->echo_pin); |
| 126 | } |
| 127 | |
| 128 | ret = of_property_read_u32(np, |
| 129 | "echo-active-ms", |
| 130 | &value); |
| 131 | if (ret) { |
| 132 | dev_err(&pdev->dev, |
| 133 | "failed to get echo-active-ms from OF\n"); |
| 134 | return ret; |
| 135 | } |
| 136 | data->echo_active_ms = value; |
| 137 | /* sanity check on echo_active_ms */ |
| 138 | if (!data->echo_active_ms || data->echo_active_ms > 999) { |
| 139 | dev_err(&pdev->dev, |
| 140 | "echo-active-ms: %u - bad value from OF\n", |
| 141 | data->echo_active_ms); |
| 142 | return -EINVAL; |
| 143 | } |
| 144 | } |
| 145 | |
| 146 | if (of_property_read_bool(np, "assert-falling-edge")) |
| 147 | data->assert_falling_edge = true; |
| 148 | return 0; |
| 149 | } |
| 150 | |
| 151 | static unsigned long |
| 152 | get_irqf_trigger_flags(const struct pps_gpio_device_data *data) |
| 153 | { |
| 154 | unsigned long flags = data->assert_falling_edge ? |
| 155 | IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; |
| 156 | |
| 157 | if (data->capture_clear) { |
| 158 | flags |= ((flags & IRQF_TRIGGER_RISING) ? |
| 159 | IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); |
| 160 | } |
| 161 | |
| 162 | return flags; |
| 163 | } |
| 164 | |
| 165 | static int pps_gpio_probe(struct platform_device *pdev) |
| 166 | { |
| 167 | struct pps_gpio_device_data *data; |
| 168 | int ret; |
| 169 | int pps_default_params; |
| 170 | const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data; |
| 171 | |
| 172 | /* allocate space for device info */ |
| 173 | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| 174 | if (!data) |
| 175 | return -ENOMEM; |
| 176 | platform_set_drvdata(pdev, data); |
| 177 | |
| 178 | /* GPIO setup */ |
| 179 | if (pdata) { |
| 180 | data->gpio_pin = pdata->gpio_pin; |
| 181 | data->echo_pin = pdata->echo_pin; |
| 182 | |
| 183 | data->assert_falling_edge = pdata->assert_falling_edge; |
| 184 | data->capture_clear = pdata->capture_clear; |
| 185 | data->echo_active_ms = pdata->echo_active_ms; |
| 186 | } else { |
| 187 | ret = pps_gpio_setup(pdev); |
| 188 | if (ret) |
| 189 | return -EINVAL; |
| 190 | } |
| 191 | |
| 192 | /* IRQ setup */ |
| 193 | ret = gpiod_to_irq(data->gpio_pin); |
| 194 | if (ret < 0) { |
| 195 | dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret); |
| 196 | return -EINVAL; |
| 197 | } |
| 198 | data->irq = ret; |
| 199 | |
| 200 | /* initialize PPS specific parts of the bookkeeping data structure. */ |
| 201 | data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | |
| 202 | PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; |
| 203 | if (data->capture_clear) |
| 204 | data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | |
| 205 | PPS_ECHOCLEAR; |
| 206 | data->info.owner = THIS_MODULE; |
| 207 | snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", |
| 208 | pdev->name, pdev->id); |
| 209 | if (data->echo_pin) { |
| 210 | data->info.echo = pps_gpio_echo; |
| 211 | data->echo_timeout = msecs_to_jiffies(data->echo_active_ms); |
| 212 | timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0); |
| 213 | } |
| 214 | |
| 215 | /* register PPS source */ |
| 216 | pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; |
| 217 | if (data->capture_clear) |
| 218 | pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; |
| 219 | data->pps = pps_register_source(&data->info, pps_default_params); |
| 220 | if (IS_ERR(data->pps)) { |
| 221 | dev_err(&pdev->dev, "failed to register IRQ %d as PPS source\n", |
| 222 | data->irq); |
| 223 | return PTR_ERR(data->pps); |
| 224 | } |
| 225 | |
| 226 | /* register IRQ interrupt handler */ |
| 227 | ret = devm_request_irq(&pdev->dev, data->irq, pps_gpio_irq_handler, |
| 228 | get_irqf_trigger_flags(data), data->info.name, data); |
| 229 | if (ret) { |
| 230 | pps_unregister_source(data->pps); |
| 231 | dev_err(&pdev->dev, "failed to acquire IRQ %d\n", data->irq); |
| 232 | return -EINVAL; |
| 233 | } |
| 234 | |
| 235 | dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", |
| 236 | data->irq); |
| 237 | |
| 238 | return 0; |
| 239 | } |
| 240 | |
| 241 | static int pps_gpio_remove(struct platform_device *pdev) |
| 242 | { |
| 243 | struct pps_gpio_device_data *data = platform_get_drvdata(pdev); |
| 244 | |
| 245 | pps_unregister_source(data->pps); |
| 246 | if (data->echo_pin) { |
| 247 | del_timer_sync(&data->echo_timer); |
| 248 | /* reset echo pin in any case */ |
| 249 | gpiod_set_value(data->echo_pin, 0); |
| 250 | } |
| 251 | dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); |
| 252 | return 0; |
| 253 | } |
| 254 | |
| 255 | static const struct of_device_id pps_gpio_dt_ids[] = { |
| 256 | { .compatible = "pps-gpio", }, |
| 257 | { /* sentinel */ } |
| 258 | }; |
| 259 | MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); |
| 260 | |
| 261 | static struct platform_driver pps_gpio_driver = { |
| 262 | .probe = pps_gpio_probe, |
| 263 | .remove = pps_gpio_remove, |
| 264 | .driver = { |
| 265 | .name = PPS_GPIO_NAME, |
| 266 | .of_match_table = pps_gpio_dt_ids, |
| 267 | }, |
| 268 | }; |
| 269 | |
| 270 | module_platform_driver(pps_gpio_driver); |
| 271 | MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>"); |
| 272 | MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>"); |
| 273 | MODULE_DESCRIPTION("Use GPIO pin as PPS source"); |
| 274 | MODULE_LICENSE("GPL"); |
| 275 | MODULE_VERSION("1.2.0"); |