marvell/obm/Common/Flash/SPI/NZAS/SPINOR.c

/******************************************************************************
 *
 *  (C)Copyright 2013 Marvell Hefei Branch. All Rights Reserved.
 *
 *  THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MARVELL.
 *  The copyright notice above does not evidence any actual or intended
 *  publication of such source code.
 *  This Module contains Proprietary Information of Marvell and should be
 *  treated as Confidential.
 *  The information in this file is provided for the exclusive use of the
 *  licensees of Marvell.
 *  Such users have the right to use, modify, and incorporate this code into
 *  products for purposes authorized by the license agreement provided they
 *  include this notice and the associated copyright notice with any such
 *  product.
 *  The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

#include "spi.h"
#include "SPINOR.h"
#include "GPIO.h"
#include "Typedef.h"
#include "Errors.h"
#include "PlatformConfig.h"
#include "xllp_dmac.h"
#include "timer.h"
#include "SPINOR_extened.h"

extern UINT_T Flash_size;

SPINOR_T G_spinor_info;
P_SPINOR_T pGspinor_info = &G_spinor_info;

UINT_T Spansion_SPINOR_Flash = 0;

P_SPINOR_T getSPINor_Info(void) {
	return pGspinor_info;
}

__attribute__ ((aligned(16))) XLLP_DMAC_DESCRIPTOR_T pRX_data, pTX_cmd;
__attribute__ ((aligned(16)))unsigned char tx_command_spinor[SIZE_4KB];

UINT_T InitializeSPIDevice(UINT8_T FlashNum, UINT8_T* P_DefaultPartitionNum)
{
	UINT_T Retval = NoError;
	UINT_T i, ID, status;
	UINT_T status_value, config_value;
	unsigned char mid, status2;
	unsigned short did;
	P_SPINOR_T spinor_info = getSPINor_Info();

	P_FlashProperties_T pFlashP = GetFlashProperties(BOOT_FLASH);

	memset(spinor_info, 0, sizeof(SPINOR_T));

	ChipSelectSPINOR();
	SPI_ConfigCS();
	SPINOR_Reset();
	SPINOR_ReadId(&mid, &did);
	obm_printf("Manufacturer ID: %x, device ID: %x\n\r", mid, did);

	SetCurrentFlashBootType(BOOT_FLASH);

	//setup Flash Properties info
	pFlashP->BlockSize					= 0x10000;		// 64KB
	pFlashP->PageSize					= 0x100; 		// 256B
	pFlashP->NumBlocks				= 0x100;			// 256
	pFlashP->ResetFlash				= NULL;
	pFlashP->FlashSettings.UseBBM 		= 0;
	pFlashP->FlashSettings.UseSpareArea 	= 0;
	pFlashP->FlashSettings.SASize 		= 0;
	pFlashP->FlashSettings.UseHwEcc 		= 0;
	pFlashP->StreamingFlash 			= FALSE;
	pFlashP->StagedInitRequired 			= FALSE;
	pFlashP->FlashType 				= SPI_FLASH;
	pFlashP->FinalizeFlash 				= NULL;
	pFlashP->TimFlashAddress 			= 0;
	
	*P_DefaultPartitionNum = 0;

	switch (mid)
	{
		case SPANSION_ID:
			obm_printf("Spansion SPI-Nor\n\r");
			switch (did)
			{
				case 0x0219:
					spinor_info->large_capacity				= 0x01;
					spinor_info->enable_4bytes				= 0x00;
					//spinor_info->write_enable_4enable_4bytes	= 0x00;
					//spinor_info->read_4bytes_status_cmd		= 0x00;
					//spinor_info->spi_4bytes_enabled_bit		= 0x00;
					spinor_info->read_4bytes_cmd			= SPINOR_READ_4Bytes_CMD1;
					spinor_info->write_4bytes_cmd			= SPINOR_PROGRAM_4Bytes_CMD1;
					spinor_info->erase_4bytes_cmd			= SPINOR_SECTOR_ERASE_4Bytes_CMD1;
					Spansion_SPINOR_Flash = 1;
				break;

				case 0x0218:
					Spansion_SPINOR_Flash = 1;
				default:
					break;
			}
			break;
			
		case MACRONIX_ID:
			obm_printf("Macronix SPI-Nor\n\r");
			switch (did)
			{
				case 0x2539:
					spinor_info->large_capacity				= 0x01;
					spinor_info->enable_4bytes				= 0x00;
					//spinor_info->write_enable_4enable_4bytes	= 0x00;
					//spinor_info->read_4bytes_status_cmd		= 0x00;
					//spinor_info->spi_4bytes_enabled_bit		= 0x00;
					spinor_info->read_4bytes_cmd			= SPINOR_READ_4Bytes_CMD1;
					spinor_info->write_4bytes_cmd			= SPINOR_PROGRAM_4Bytes_CMD1;
					spinor_info->erase_4bytes_cmd			= SPINOR_SECTOR_ERASE_4Bytes_CMD1;
					break;
				default:
					break;
			}
			break;
		case GIGADEVICE_ID:
			obm_printf("Giga SPI-Nor\n\r");
			switch (did)
			{
				case 0x6019:
					spinor_info->large_capacity				= 0x01; // need to check spec
					spinor_info->enable_4bytes				= 0x01; // need to check spec
					spinor_info->write_enable_4enable_4bytes	= 0x00; // need to check spec
					spinor_info->read_4bytes_status_cmd		= SPINOR_READ_STATUS_CMD0;
					spinor_info->spi_4bytes_enabled_bit		= BIT3; // need to check spec
					spinor_info->read_4bytes_cmd			= SPINOR_READ_4Bytes_CMD0;
					spinor_info->write_4bytes_cmd			= SPINOR_PROGRAM_4Bytes_CMD0;
					spinor_info->erase_4bytes_cmd			= SPINOR_SECTOR_ERASE_4Bytes_CMD0;
					break;
				default:
					break;
			}
			break;
		case MICRON_ID:
			obm_printf("Micron SPI-Nor\n\r");
			switch (did)
			{
				case 0xcb19:
					spinor_info->large_capacity				= 0x01; // need to check spec
					spinor_info->enable_4bytes				= 0x01; // need to check spec
					spinor_info->write_enable_4enable_4bytes	= 0x01; // need to check spec
					spinor_info->read_4bytes_status_cmd		= SPINOR_READ_STATUS_CMD1;
					spinor_info->spi_4bytes_enabled_bit		= BIT0; // need to check spec
					spinor_info->read_4bytes_cmd			= SPINOR_READ_4Bytes_CMD1;
					spinor_info->write_4bytes_cmd			= SPINOR_PROGRAM_4Bytes_CMD0;
					spinor_info->erase_4bytes_cmd			= SPINOR_SECTOR_ERASE_4Bytes_CMD0;
					break;
				default:
					break;
			}
			break;
		case FIDELIX_ID:
			obm_printf("Fidelix SPI-NOR\n\r");
			switch(did)
			{
				case 0x4218:
					spinor_info->large_capacity	= 0x0;
					break;
				default:
					break;
			}
			break;
		default:
			break;
	}
	if (spinor_info->large_capacity == 1) // 1: 32MB, 2:  64MB???
	{
		obm_printf("Large capacity\n\r");
		Flash_size = 0x02000000;

		pFlashP->ReadFromFlash 	= &SPINOR_Extend_Read;
		pFlashP->WriteToFlash	= &SPINOR_Extend_Write;
		pFlashP->EraseFlash		= &SPINOR_Extend_Erase;
		SPINOR_Enable4BytesMode();
	}
	else
	{
		pFlashP->ReadFromFlash	= &SPINOR_Read;
		pFlashP->WriteToFlash	= &SPINOR_Write;
		pFlashP->EraseFlash		= &SPINOR_Erase;
	}

	SPINOR_UnProtectBlocks();

	//fill tx dummy buffer with special pattern
	memset(tx_command_spinor, 0xA5, sizeof(tx_command_spinor));

	return Retval;
}

UINT8_T SPINOR_ReadReg(SPINOR_Register reg)
{
	UINT_T dummy;
	UINT8_T status, command;

	P_SPINOR_T spinor_info = getSPINor_Info();
	switch (reg)
	{
		case SPINOR_4bytes_Status_Register:
			command = spinor_info->read_4bytes_status_cmd;
			break;
		case SPINOR_write_enable_Status_Register:
			command = SPI_CMD_READ_STATUS;
			break;
		default:
			command = SPI_CMD_READ_STATUS;
			break;
	}

	SPI_DisableSSP();
	SPI_ConfigDSS(16);

	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_WriteData(command << 8);
	SPI_WaitSSPComplete();
	dummy = SPI_ReadData();
	status = dummy & 0xFF;	//the status will be in the second byte

	Deassert_CS();

	SPI_DisableSSP();

	//return last known status
	return status;
}

void SPINOR_Enable4BytesMode(void)
{
	UINT8_T status, cmd[1], data[1];
	
	P_SPINOR_T spinor_info = getSPINor_Info();
	if (!spinor_info->enable_4bytes)
		return;

	status = SPINOR_ReadReg(SPINOR_4bytes_Status_Register);
	if ((status & spinor_info->spi_4bytes_enabled_bit) == spinor_info->spi_4bytes_enabled_bit)
	{
		// It's already 4-Bytes Modes!!!
		return;
	}

	if (spinor_info->write_enable_4enable_4bytes)
		SPINOR_WriteEnable();

	cmd[0] = SPINOR_ENABLE_4BYTE_MODE;

	SPI_DisableSSP();
	SPI_ConfigDSS(8);
	Assert_CS();
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	//make sure SSP is disabled
	SPI_DisableSSP();

	status = SPINOR_ReadReg(SPINOR_4bytes_Status_Register);
	if ((status & spinor_info->spi_4bytes_enabled_bit) != spinor_info->spi_4bytes_enabled_bit)
	{
		obm_printf("Enter 4-Bytes Modes failed!!!\n\r");
	}

	return;
}

void SPINOR_Disable4BytesMode(void)
{
	UINT8_T status, cmd[1], data[1];

	P_SPINOR_T spinor_info = getSPINor_Info();
	if (!spinor_info->enable_4bytes)
		return;

	status = SPINOR_ReadReg(SPINOR_4bytes_Status_Register);
	if ((status & spinor_info->spi_4bytes_enabled_bit) == 0x00)
	{
		// It's already 3-Bytes Modes!!!
		return;
	}

	if (spinor_info->write_enable_4enable_4bytes)
		SPINOR_WriteEnable();

	cmd[0] = SPINOR_DISABLE_4BYTE_MODE;

	SPI_DisableSSP();
	Assert_CS();
	SPI_FireUp();
		
	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	//make sure SSP is disabled
	SPI_DisableSSP();

	status = SPINOR_ReadReg(SPINOR_4bytes_Status_Register);
	if ((status & spinor_info->spi_4bytes_enabled_bit) != 0x00)
	{
		obm_printf("Exit 4-Bytes Modes failed!!!\n\r");
	}
 
	return;
}

void SPINOR_Protect_Blocks(void)
{
	UINT_T status_value, status1_value;

#if 0
	// make sure it's ready
	SPINOR_ReadStatus(TRUE);

	// read out status register and configuration register
	status_value = Giga_SPINor_ReadReg(Giga_Status_Register);
	status1_value = Giga_SPINor_ReadReg(Giga_Status_Register1);

	if (((status1_value & GIGA_STATUS_CMP) == 0x0)
		&& ((status_value & (GIGA_STATUS_BP0 |
								GIGA_STATUS_BP1 |
								GIGA_STATUS_BP2|
								GIGA_STATUS_BP3 |
								GIGA_STATUS_BP4))
		== (GIGA_STATUS_BP0 | GIGA_STATUS_BP3)))
	{
		obm_printf("SPI Nor is already protected\n\r");
		return;
	}
	else
	{
		obm_printf("SPI Nor is not protected\n\r");
	}
	
	SPINOR_WriteEnable();

	// clear BP0/BP1/BP2/BP3/BP4
	status_value &= ~(GIGA_STATUS_BP0 |
						GIGA_STATUS_BP1 |
						GIGA_STATUS_BP2|
						GIGA_STATUS_BP3 |
						GIGA_STATUS_BP4);

	// set BP0/BP3
	status_value |= GIGA_STATUS_BP0 | GIGA_STATUS_BP3;

	// clear CMP
	status1_value &= ~GIGA_STATUS_CMP;

	MX_SPINOR_WriteStatus(status_value, status1_value);
	SPINOR_ReadStatus(TRUE);
	
	status_value = Giga_SPINor_ReadReg(Giga_Status_Register);
	status1_value = Giga_SPINor_ReadReg(Giga_Status_Register1);

	obm_printf("SPI Nor protect done\n\r");
#endif
}

void SPINOR_UnProtectBlocks(void)
{
	UINT_T status_value, status1_value;
	
	SPINOR_ReadStatus(TRUE);
	
	status_value = SPINOR_ReadReg(SPINOR_write_enable_Status_Register);

	if (((status_value & (BIT2 | BIT3 | BIT4)) == 0) )
	{
		obm_printf("SPI Nor is already unprotected\n\r");
		return;
	}
	else
	{
		obm_printf("SPI Nor is not unprotected\n\r");
	}
	
	SPINOR_WriteEnable();

	// clear BP0/BP1/BP2, BP3/BP4 doesn't matter
	status_value &= ~(BIT2 | BIT3 | BIT4);
	
	SPINOR_WriteStatus(status_value);	
	
	SPINOR_ReadStatus(TRUE);
	
	obm_printf("SPI Nor unprotect done\n\r");
}

void SPINOR_Reset(void)
{
	UINT8_T status, cmd[1], data[1];

	cmd[0] = SPI_CMD_RELEASE_POWER_DOWN;
	SPI_DisableSSP();
	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	SPI_DisableSSP();
	// reset memory
	SPINOR_ResetEnable();
	SPINOR_ResetMemory();
	SPINOR_ReadStatus(TRUE);
	return;
}

void SPINOR_ResetEnable(void)
{
	UINT8_T status, cmd[1], data[1];

	cmd[0] = 0x66;
	
	SPI_DisableSSP();
	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	SPI_DisableSSP();

	return;
}

void SPINOR_ResetMemory(void)
{
	UINT8_T status, cmd[1], data[1];

	cmd[0] = 0x99;
	
	SPI_DisableSSP();
	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();

	SPI_DisableSSP();

	return;
}

void SPINOR_WriteStatus(unsigned char status)
{
	unsigned int temp;

	temp = 0x01 << 8;
	temp |= status;

	SPI_DisableSSP();

	SPI_ConfigDSS(16);

	Assert_CS();
	//fire it up
	SPI_FireUp();
	
	SPI_WriteData(temp);
	SPI_WaitSSPComplete();
	
	Deassert_CS();
	SPI_DisableSSP();

	return;
}


void SPINOR_ReadStatus(UINT_T Wait)
{
	UINT_T i=0, timeout=0;
	UINT_T read, ready, dummy, status;

	status = NoError;
	read = FALSE;	//this flag gets set when we read first entry from fifo
	//if the caller waits to 'Wait' for the BUSY to be cleared, start READY off as FALSE
	//if the caller doesn't wait to wait, set READY as true, so we don't wait on the bit
	ready = (Wait) ? FALSE : TRUE;

	do{
		SPI_DisableSSP();
		
		SPI_ConfigDSS(16);
		Assert_CS();
		//fire it up
		SPI_FireUp();

		//load the command + 1 dummy byte
		SPI_WriteData(SPI_CMD_READ_STATUS << 8);
		SPI_WaitSSPComplete();
		dummy = SPI_ReadData();
		Deassert_CS();

		//set the READ flag, and read the status
		read = TRUE;
		status = dummy & 0xFF;	//the status will be in the second byte

		//set the READY flag if the status wait bit is cleared
		if((status & 1) == 0)		// operation complete (eg. not busy)?
			ready = TRUE;

		SPI_DisableSSP();

		//we need to wait until we read at least 1 valid status entry
		//if we're waiting for the Write, wait till WIP bits goes to 0
	}while ((!read) || (!ready));


	//return last known status
	return;
}

void SPINOR_WriteEnable(void)
{
	UINT8_T status, cmd[1], data[1];

	cmd[0] = SPI_CMD_WRITE_ENABLE;

	P_SPINOR_T spinor_info = getSPINor_Info();

	SPI_DisableSSP();
	
	Assert_CS();
	SPI_FireUp();
		
	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	//make sure SSP is disabled
	SPI_DisableSSP();

	status = SPINOR_ReadReg(SPINOR_write_enable_Status_Register);
	if (status & BIT1 !=BIT1)
	{
		obm_printf("Write enable failed!!!\n\r");
	}
 
	return;
}

void SPINOR_ReadId(unsigned char *mid, unsigned short *did)
{
	UINT8_T cmd[4], data[4];

	cmd[0] = SPI_CMD_JEDEC_ID;
	cmd[1] = 0;
	cmd[2] = 0;
	cmd[3] = 0;

	SPI_DisableSSP();

	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();	
	SPI_DisableSSP();


	*mid = data[1];
	*did = data[3] | (data[2] << 8);

	return;
}

unsigned int SPINOR_Page_Program_DMA(unsigned int Address, unsigned int Buffer, unsigned int Size)
{
	unsigned int dummy, start_time, Retval = NoError;
	DMA_CMDx_T TX_data;
	UINT8_T cmd[4], data[4];
	INT_T i;
	volatile int timeout = 0xFFFFF;

	cmd[0] = SPI_CMD_PROGRAM;
	cmd[1] = ((Address & 0x00FFFFFF) >> 16) & 0xff;
	cmd[2] = ((Address & 0x00FFFFFF) >> 8) & 0xff;
	cmd[3] = Address & 0xFF;

	TX_data.value = 0;
	TX_data.bits.IncSrcAddr = 1;
	TX_data.bits.FlowTrg = 1;
	TX_data.bits.Width = 1;   //Don't need to convert Endian if transmit by byte
	TX_data.bits.MaxBurstSize = 1;
	TX_data.bits.Length = Size;

	//setup DMA
	//Map Device to Channels
	XllpDmacMapDeviceToChannel(SSP_TX_DMA_DEVICE, SSP_TX_CHANNEL);
	XllpDmacNoDescriptorFetch(SSP_TX_CHANNEL );

	//turn ON user alignment - in case buffer address is 64bit aligned
	alignChannel(SSP_TX_CHANNEL, 1);

	loadNonDescriptor((unsigned int)Buffer, (unsigned int) SSP_DR, &TX_data, SSP_TX_CHANNEL);

	SPI_DisableSSP();

	//setup for DMA: TX and RX DMA request + DMA handles Trailing bytes
	SPI_ConfigDMA(4, 3, 0, 0, 0);

	//setup IER
	SPI_ConfigInt(0);
	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	//fire it up
	SPI_FireUp();
	//Kick off DMA's
	XllpDmacStartTransfer(SSP_TX_CHANNEL);

	//wait until the TX channel gets the stop interrupt
	timeout = 0xFFFFFF;
	while( (readDmaStatusRegister(SSP_TX_CHANNEL) & XLLP_DMAC_DCSR_STOP_INTR) != XLLP_DMAC_DCSR_STOP_INTR )
	{
		ROW_DELAY(DEFAULT_TIMEOUT);

		//if we've waited long enough, fail
		if((timeout--) <= 0)
		{
			obm_printf("TX channel gets the stop interrupt timeout\n\r");
			break;
		}
	}
	
	SPI_WaitSSPComplete();

	Deassert_CS();
	SPI_DisableSSP();

	//clear out DMA settings
	XllpDmacUnMapDeviceToChannel(SSP_TX_DMA_DEVICE, SSP_TX_CHANNEL);

	return Retval;

}

unsigned int SPINOR_Read_DMA(unsigned int Offset, unsigned int Buffer, unsigned int Size)
{
	unsigned int i;
	DMA_CMDx_T RX_data, TX_cmd;
	UINT8_T data[4];
	UINT_T command, dummy, timeout;

	unsigned int * buff = (unsigned int *) Buffer;

	command = SPI_CMD_READ;
	command |= (((Offset >> 16) & 0xFF) << 8);
	command |= (((Offset >> 8) & 0xFF) << 16);
	command |= (((Offset >> 0) & 0xFF) << 24);

	//fill out commands
	RX_data.value = 0;
	RX_data.bits.IncTrgAddr = 1;
	RX_data.bits.FlowSrc = 1;
	RX_data.bits.Width = 3;
	RX_data.bits.MaxBurstSize = 2;

	TX_cmd.value = 0;
	TX_cmd.bits.IncSrcAddr = 1;
	TX_cmd.bits.FlowTrg = 1;
	TX_cmd.bits.Width = 3;
	TX_cmd.bits.MaxBurstSize = 2;

	//Map Device to Channels
	XllpDmacMapDeviceToChannel(SSP_RX_DMA_DEVICE, SSP_RX_CHANNEL);
	XllpDmacMapDeviceToChannel(SSP_TX_DMA_DEVICE, SSP_TX_CHANNEL);

	//turn ON user alignment - in case buffer address is 64bit aligned
	alignChannel(SSP_RX_CHANNEL, 1);

	// * configure RX & TX descriptors * //
	configDescriptor(&pRX_data, NULL, (unsigned int)SSP_DR,	(unsigned int)Buffer, &RX_data, Size, 1);
	configDescriptor(&pTX_cmd,
					 NULL,
					 (unsigned int)&tx_command_spinor[0],
					 (unsigned int)SSP_DR,
					 &TX_cmd,
					 Size,
					 1);

	//Load descriptors
	loadDescriptor (&pRX_data, SSP_RX_CHANNEL);
	loadDescriptor (&pTX_cmd, SSP_TX_CHANNEL);

	SPI_DisableSSP();

	//setup in 32 bit mode
	SPI_ConfigDSS(32);

    //setup for DMA: TX and RX DMA request + DMA handles Trailing bytes + FIFO RX Thresh+1
	//SSP controller does endian convert, enable RX FIFO Auto Full Control
	SPI_ConfigDMA(3, 3, 2, 2, 1);

    //setup IER
	SPI_ConfigInt(0);

	#if ENABLE_MMU
	dcache_clean_range(&pRX_data, sizeof(XLLP_DMAC_DESCRIPTOR_T));
	dcache_clean_range(&pTX_cmd, sizeof(XLLP_DMAC_DESCRIPTOR_T));
	dcache_clean_range(&tx_command_spinor[0], sizeof(tx_command_spinor));
	dcache_invalidate_range(Buffer, Size);
	#endif
	
	Assert_CS();
	//fire it up
	SPI_FireUp();

	SPI_WriteData(command);
	SPI_WaitSSPComplete();
	dummy = SPI_ReadData();
	
	//Kick off DMA's
	XllpDmacStartTransfer(SSP_TX_CHANNEL);
	XllpDmacStartTransfer(SSP_RX_CHANNEL);

	//wait until the RX channel gets the stop interrupt
	timeout = 0xFFFFF;
	while( (readDmaStatusRegister(SSP_RX_CHANNEL) & XLLP_DMAC_DCSR_STOP_INTR) != XLLP_DMAC_DCSR_STOP_INTR )
	{
		ROW_DELAY(DEFAULT_TIMEOUT);

		if((timeout--) <= 0)
		{
			obm_printf("RX channel gets the stop interrupt timeout\n\r");
			break;
		}
	}

	timeout = 0xFFFFF;
	while( (readDmaStatusRegister(SSP_TX_CHANNEL) & XLLP_DMAC_DCSR_STOP_INTR) != XLLP_DMAC_DCSR_STOP_INTR )
	{
		ROW_DELAY(DEFAULT_TIMEOUT);

		if((timeout--) <= 0)
		{
			obm_printf("TX channel gets the stop interrupt timeout\n\r");
			break;
		}
	}

	SPI_WaitSSPComplete();

	Deassert_CS();
	SPI_DisableSSP();

	//clear out DMA settings
	XllpDmacUnMapDeviceToChannel(SSP_RX_DMA_DEVICE, SSP_RX_CHANNEL);
	XllpDmacUnMapDeviceToChannel(SSP_TX_DMA_DEVICE, SSP_TX_CHANNEL);

	return NoError;
}


UINT_T SPINOR_Read(UINT_T FlashOffset, UINT_T Buffer, UINT_T Size)
{
	UINT_T Retval = NoError, i, total_size, read_size, status;

	do {

		read_size = Size > SIZE_4KB ? SIZE_4KB : Size;
	
		Retval = SPINOR_Read_DMA(FlashOffset, Buffer, SIZE_4KB);

		//update counters
		FlashOffset+=read_size;
		Buffer+=read_size;
		Size-=read_size;

	} while( (Size > 0) && (Retval == NoError) );

	return Retval;
}

UINT_T SPINOR_EraseSector(UINT_T secAddr, UINT_T cmdSel)
{
	UINT_T temp, command, CMDSelect;
	
	SPINOR_ReadStatus(TRUE);
	SPINOR_WriteEnable();
	SPINOR_ReadStatus(TRUE);

	switch (cmdSel)
	{
		case 0:
			//obm_printf("4KB erase command 0x20\n\r");
			CMDSelect = 0x20;
			break;

		case 1:
			//obm_printf("32KB erase command 0xd8\n\r");
			CMDSelect = 0xd8;
			break;

		default:
			//obm_printf("64KB erase command 0xd8\n\r");
			CMDSelect = 0xd8;
			break;
	}

	if (Spansion_SPINOR_Flash)
		command = CMDSelect << 24;
	else
		command = SPI_CMD_SECTOR_ERASE << 24;
	
	command |= secAddr & 0xFFFFFF;

	SPI_DisableSSP();
	
	SPI_ConfigDSS(32);

	Assert_CS();
	SPI_FireUp();
	
	SPI_WriteData(command);
	SPI_WaitSSPComplete();

	Deassert_CS();
	//make sure SSP is disabled
	SPI_DisableSSP();

	SPINOR_ReadStatus(TRUE);

	return NoError;
}

UINT_T SPINOR_Wipe(void)
{
	UINT8_T cmd[1], data[1];

	cmd[0] = SPI_CMD_CHIP_ERASE;
	
	//make sure the device is ready for the command
	SPINOR_ReadStatus(TRUE);
	SPINOR_WriteEnable();
	SPINOR_ReadStatus(TRUE);

	SPI_DisableSSP();
	
	Assert_CS();
	SPI_FireUp();

	SPI_Write_Read(cmd, data, sizeof(cmd));

	Deassert_CS();
	//make sure SSP is disabled
	SPI_DisableSSP();

	SPINOR_ReadStatus(TRUE);
	
	return NoError;
}

UINT_T SPINOR_Write(UINT_T Address, UINT_T Buffer, UINT_T Size)
{
	UINT_T Retval, i, total_size, write_size, status;
	UINT_T *buff = (UINT_T *) Buffer;

	if(Size & 0x3)    //make size 4bytes-align
    	Size = (Size+4)&(~3);

	total_size = Size >> 2;

	//postprocessing... endian convert
	if ((Address + Size) > 0x1000000)
		return FlashAddrOutOfRange;

	do {
		//make sure the device is ready to be written to
		SPINOR_ReadStatus(TRUE);
		//get device ready to Program
		SPINOR_WriteEnable();
		
		SPINOR_ReadStatus(TRUE);

		write_size = Size > WRITE_SIZE ? WRITE_SIZE : Size;

		//write a byte
		if (write_size == WRITE_SIZE)
		{
			Retval = SPINOR_Page_Program_DMA(Address, Buffer, WRITE_SIZE);
			
			//update counters
			Address+=WRITE_SIZE;
			Buffer+=WRITE_SIZE;
			Size-=WRITE_SIZE;
		}
		else
		{
			Retval = SPINOR_Page_Program_DMA(Address, Buffer, WRITE_SIZE);
			Size=0;
		}

		SPINOR_ReadStatus(TRUE);

	} while( (Size > 0) && (Retval == NoError) );

	return Retval;
}

UINT_T SPINOR_Erase(UINT_T Address, UINT_T Size)
{
	UINT_T numSectors, i, sector_size, Retval = NoError, zero_address = 0;
	
	P_FlashProperties_T pFlashP = GetFlashProperties(BOOT_FLASH);

	if ((Address + Size) > 0x1000000)
		return FlashAddrOutOfRange;

	if ((Spansion_SPINOR_Flash) && (Address == 0))
		zero_address = 1;

	if (zero_address)
	{
		for (i = 0; i < 8; i++)
		{
			SPINOR_EraseSector(Address, 0);
			Address += 0x1000;
		}

		SPINOR_EraseSector(Address, 1);
		Address += 0x8000;
	}

	sector_size = pFlashP->BlockSize;

	if (Size % pFlashP->BlockSize == 0)
		numSectors = Size / pFlashP->BlockSize;
	else
		numSectors = Size / pFlashP->BlockSize + 1;

	if (zero_address)
		numSectors -= 1;

	for (i = 0; i < numSectors; i++)
	{
		//erase this sector
		Retval = SPINOR_EraseSector(Address, 2);

		Address += sector_size;

		if (Retval != NoError)
			break;
	}

	return Retval;
}