| b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | PART_NAME=firmware |
| 2 | REQUIRE_IMAGE_METADATA=1 |
| 3 | |
| 4 | RAMFS_COPY_BIN='fw_printenv fw_setenv' |
| 5 | RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' |
| 6 | |
| 7 | platform_check_image() { |
| 8 | case "$(board_name)" in |
| 9 | asus,rt-ac58u) |
| 10 | CI_UBIPART="UBI_DEV" |
| 11 | local ubidev=$(nand_find_ubi $CI_UBIPART) |
| 12 | local asus_root=$(nand_find_volume $ubidev jffs2) |
| 13 | |
| 14 | [ -n "$asus_root" ] || return 0 |
| 15 | |
| 16 | cat << EOF |
| 17 | jffs2 partition is still present. |
| 18 | There's probably no space left |
| 19 | to install the filesystem. |
| 20 | |
| 21 | You need to delete the jffs2 partition first: |
| 22 | # ubirmvol /dev/ubi0 --name=jffs2 |
| 23 | |
| 24 | Once this is done. Retry. |
| 25 | EOF |
| 26 | return 1 |
| 27 | ;; |
| 28 | esac |
| 29 | return 0; |
| 30 | } |
| 31 | |
| 32 | askey_do_upgrade() { |
| 33 | local tar_file="$1" |
| 34 | |
| 35 | local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') |
| 36 | board_dir=${board_dir%/} |
| 37 | |
| 38 | tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs |
| 39 | |
| 40 | nand_do_upgrade "$1" |
| 41 | } |
| 42 | |
| 43 | zyxel_do_upgrade() { |
| 44 | local tar_file="$1" |
| 45 | |
| 46 | local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') |
| 47 | board_dir=${board_dir%/} |
| 48 | |
| 49 | tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel |
| 50 | |
| 51 | if [ -n "$UPGRADE_BACKUP" ]; then |
| 52 | tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs |
| 53 | else |
| 54 | tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs |
| 55 | fi |
| 56 | } |
| 57 | |
| 58 | platform_do_upgrade() { |
| 59 | case "$(board_name)" in |
| 60 | 8dev,jalapeno |\ |
| 61 | aruba,ap-303 |\ |
| 62 | aruba,ap-303h |\ |
| 63 | aruba,ap-365 |\ |
| 64 | avm,fritzbox-7530 |\ |
| 65 | avm,fritzrepeater-1200 |\ |
| 66 | avm,fritzrepeater-3000 |\ |
| 67 | buffalo,wtr-m2133hp |\ |
| 68 | cilab,meshpoint-one |\ |
| 69 | edgecore,ecw5211 |\ |
| 70 | edgecore,oap100 |\ |
| 71 | engenius,eap2200 |\ |
| 72 | glinet,gl-ap1300 |\ |
| 73 | luma,wrtq-329acn |\ |
| 74 | mobipromo,cm520-79f |\ |
| 75 | qxwlan,e2600ac-c2) |
| 76 | nand_do_upgrade "$1" |
| 77 | ;; |
| 78 | alfa-network,ap120c-ac) |
| 79 | part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')" |
| 80 | if [ "$part" = "rootfs1" ]; then |
| 81 | fw_setenv active 2 || exit 1 |
| 82 | CI_UBIPART="rootfs2" |
| 83 | else |
| 84 | fw_setenv active 1 || exit 1 |
| 85 | CI_UBIPART="rootfs1" |
| 86 | fi |
| 87 | nand_do_upgrade "$1" |
| 88 | ;; |
| 89 | asus,map-ac2200) |
| 90 | CI_KERNPART="linux" |
| 91 | nand_do_upgrade "$1" |
| 92 | ;; |
| 93 | asus,rt-ac58u) |
| 94 | CI_UBIPART="UBI_DEV" |
| 95 | CI_KERNPART="linux" |
| 96 | nand_do_upgrade "$1" |
| 97 | ;; |
| 98 | cellc,rtl30vw) |
| 99 | CI_UBIPART="ubifs" |
| 100 | askey_do_upgrade "$1" |
| 101 | ;; |
| 102 | compex,wpj419) |
| 103 | nand_do_upgrade "$1" |
| 104 | ;; |
| 105 | linksys,ea6350v3 |\ |
| 106 | linksys,ea8300 |\ |
| 107 | linksys,mr8300) |
| 108 | platform_do_upgrade_linksys "$1" |
| 109 | ;; |
| 110 | meraki,mr33) |
| 111 | CI_KERNPART="part.safe" |
| 112 | nand_do_upgrade "$1" |
| 113 | ;; |
| 114 | mikrotik,hap-ac2|\ |
| 115 | mikrotik,sxtsq-5-ac) |
| 116 | [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware |
| 117 | default_do_upgrade "$1" |
| 118 | ;; |
| 119 | openmesh,a42 |\ |
| 120 | openmesh,a62 |\ |
| 121 | plasmacloud,pa1200 |\ |
| 122 | plasmacloud,pa2200) |
| 123 | PART_NAME="inactive" |
| 124 | platform_do_upgrade_dualboot_datachk "$1" |
| 125 | ;; |
| 126 | zyxel,nbg6617) |
| 127 | zyxel_do_upgrade "$1" |
| 128 | ;; |
| 129 | *) |
| 130 | default_do_upgrade "$1" |
| 131 | ;; |
| 132 | esac |
| 133 | } |