b.liu | e958203 | 2025-04-17 19:18:16 +0800 | [diff] [blame^] | 1 | --- a/drivers/misc/Makefile |
| 2 | +++ b/drivers/misc/Makefile |
| 3 | @@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/ |
| 4 | obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o |
| 5 | obj-$(CONFIG_CXL_BASE) += cxl/ |
| 6 | obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o |
| 7 | +obj-$(CONFIG_SOC_MT7620) += linkit.o |
| 8 | obj-$(CONFIG_OCXL) += ocxl/ |
| 9 | obj-y += cardreader/ |
| 10 | obj-$(CONFIG_PVPANIC) += pvpanic.o |
| 11 | --- /dev/null |
| 12 | +++ b/drivers/misc/linkit.c |
| 13 | @@ -0,0 +1,84 @@ |
| 14 | +/* |
| 15 | + * This program is free software; you can redistribute it and/or modify |
| 16 | + * it under the terms of the GNU General Public License version 2 as |
| 17 | + * publishhed by the Free Software Foundation. |
| 18 | + * |
| 19 | + * Copyright (C) 2015 John Crispin <blogic@openwrt.org> |
| 20 | + */ |
| 21 | + |
| 22 | +#include <linux/module.h> |
| 23 | +#include <linux/platform_device.h> |
| 24 | +#include <linux/of.h> |
| 25 | +#include <linux/mtd/mtd.h> |
| 26 | +#include <linux/gpio.h> |
| 27 | + |
| 28 | +#define LINKIT_LATCH_GPIO 11 |
| 29 | + |
| 30 | +struct linkit_hw_data { |
| 31 | + char board[16]; |
| 32 | + char rev[16]; |
| 33 | +}; |
| 34 | + |
| 35 | +static void sanify_string(char *s) |
| 36 | +{ |
| 37 | + int i; |
| 38 | + |
| 39 | + for (i = 0; i < 15; i++) |
| 40 | + if (s[i] <= 0x20) |
| 41 | + s[i] = '\0'; |
| 42 | + s[15] = '\0'; |
| 43 | +} |
| 44 | + |
| 45 | +static int linkit_probe(struct platform_device *pdev) |
| 46 | +{ |
| 47 | + struct linkit_hw_data hw; |
| 48 | + struct mtd_info *mtd; |
| 49 | + size_t retlen; |
| 50 | + int ret; |
| 51 | + |
| 52 | + mtd = get_mtd_device_nm("factory"); |
| 53 | + if (IS_ERR(mtd)) |
| 54 | + return PTR_ERR(mtd); |
| 55 | + |
| 56 | + ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw); |
| 57 | + put_mtd_device(mtd); |
| 58 | + |
| 59 | + sanify_string(hw.board); |
| 60 | + sanify_string(hw.rev); |
| 61 | + |
| 62 | + dev_info(&pdev->dev, "Version : %s\n", hw.board); |
| 63 | + dev_info(&pdev->dev, "Revision : %s\n", hw.rev); |
| 64 | + |
| 65 | + if (!strcmp(hw.board, "LINKITS7688")) { |
| 66 | + dev_info(&pdev->dev, "setting up bootstrap latch\n"); |
| 67 | + |
| 68 | + if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) { |
| 69 | + dev_err(&pdev->dev, "failed to setup bootstrap gpio\n"); |
| 70 | + return -1; |
| 71 | + } |
| 72 | + gpio_direction_output(LINKIT_LATCH_GPIO, 0); |
| 73 | + } |
| 74 | + |
| 75 | + return 0; |
| 76 | +} |
| 77 | + |
| 78 | +static const struct of_device_id linkit_match[] = { |
| 79 | + { .compatible = "mediatek,linkit" }, |
| 80 | + {}, |
| 81 | +}; |
| 82 | +MODULE_DEVICE_TABLE(of, linkit_match); |
| 83 | + |
| 84 | +static struct platform_driver linkit_driver = { |
| 85 | + .probe = linkit_probe, |
| 86 | + .driver = { |
| 87 | + .name = "mtk-linkit", |
| 88 | + .owner = THIS_MODULE, |
| 89 | + .of_match_table = linkit_match, |
| 90 | + }, |
| 91 | +}; |
| 92 | + |
| 93 | +int __init linkit_init(void) |
| 94 | +{ |
| 95 | + return platform_driver_register(&linkit_driver); |
| 96 | +} |
| 97 | +late_initcall_sync(linkit_init); |