mbtk/include/lynq/lynq_network.h - T108_Public - Gitiles

 #ifndef LYNQ_NETWORK_H
 #define LYNQ_NETWORK_H
 #ifdef __cplusplus
 extern "C" {
 #endif
 #define MODEM_GEN97 1
 #define CELLINFO_MAX_NUM  10
 #define LY_RECOVER_TIMER_INTERVAL 128
 #define MAX_CELLINFO_ITEM_NUMBER 32
 #define MAX_OOS_CFG_ITEM_NUMBER 32
 /*T800 platform support gsm,wcdma lte,nr */
 typedef struct{
     int gw_sig_valid; /*1 valid,1 invalid*/
     int rssi;         /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
     int wcdma_sig_valid;/*1 valid,0 invalid*/
     int wcdma_signalstrength;
     int rscp;        /* The Received Signal Code Power in dBm multipled by -1.
                       * Range : 25 to 120
                       * INT_MAX: 0x7FFFFFFF denotes invalid value.
                       * Reference: 3GPP TS 25.123, section 9.1.1.1 */
     int ecno;        /* Valid values are positive integers.  This value is the actual Ec/Io multiplied
                       * by -10.  Example: If the actual Ec/Io is -12.5 dB, then this response value
                       * will be 125.*/
     int lte_sig_valid;/*1 valid,0 invalid*/
     int lte_signalstrength;
     int rsrp;        /* The current Reference Signal Receive Power in dBm multipled by -1.
                       * Range: 44 to 140 dBm
                       * INT_MAX: 0x7FFFFFFF denotes invalid value.
                       * Reference: 3GPP TS 36.133 9.1.4 */
     int rsrq;        /* The current Reference Signal Receive Quality in dB multiplied by -1.
                       * Range: 20 to 3 dB.
                       * INT_MAX: 0x7FFFFFFF denotes invalid value.
                       * Reference: 3GPP TS 36.133 9.1.7 */
     int rssnr;       /* The current reference signal signal-to-noise ratio in 0.1 dB units.
                       * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
                       * INT_MAX : 0x7FFFFFFF denotes invalid value.
                       * Reference: 3GPP TS 36.101 8.1.1 */
     int nr_sig_valid;/*1 valid,0 invalid*/
     int ssRsrp;      /* SS(Synchronization Signal) reference signal received power, multipled by -1.
                       * Reference: 3GPP TS 38.215.
                       * Range [44, 140], INT_MAX means invalid/unreported.*/
     int ssRsrq;      /* SS reference signal received quality, multipled by -1.
                       * Reference: 3GPP TS 38.215.
                       * Range [3, 20], INT_MAX means invalid/unreported.*/
     int ssSinr;      /* SS signal-to-noise and interference ratio.
                       * Reference: 3GPP TS 38.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
                       * Range [-23, 40], INT_MAX means invalid/unreported.*/
     int csiRsrp;     /* CSI reference signal received power, multipled by -1.
                       * Reference: 3GPP TS 38.215.
                       * Range [44, 140], INT_MAX means invalid/unreported.*/
     int csiRsrq;     /* CSI reference signal received quality, multipled by -1.
                       * Reference: 3GPP TS 38.215.
                       * Range [3, 20], INT_MAX means invalid/unreported.*/
     int csiSinr;     /* CSI signal-to-noise and interference ratio.
                       * Reference: 3GPP TS 138.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
                       * Range [-23, 40], INT_MAX means invalid/unreported.*/
 }signalStrength_t;

 typedef enum {
     NETWORK_RADIO_ON_TYPE_CFUN_0=0,
     NETWORK_RADIO_ON_TYPE_NORMAL_MODE=1,
     NETWORK_RADIO_ON_TYPE_FLIGHT_MODE=4,
 }lynq_network_radio_on_type;

 int lynq_network_init(int utoken);
 int lynq_network_deinit(void);
 int lynq_query_operater(char *OperatorFN,char *OperatorSH,char *MccMnc);
 int lynq_query_network_selection_mode(int *netselMode);
 int lynq_set_network_selection_mode(const char *mode,const char* mccmnc);
 int lynq_query_available_network(char *OperatorFN,char *OperatorSH,char *MccMnc,char * NetStatus);
 int lynq_query_registration_state(const char *type,int* regState,int* imsRegState,char * LAC,char * CID,int *netType,int *radioTechFam,int *netRejected);
 int lynq_query_prefferred_networktype(int *preNetType);
 int lynq_set_prefferred_networktype(const int preffertype);
 int lynq_query_cell_info(uint64_t cellinfo[CELLINFO_MAX_NUM],int tac[CELLINFO_MAX_NUM],int earfcn[CELLINFO_MAX_NUM],int * realNum);
 int lynq_set_unsol_cell_info_listrate(const int rate);
 int lynq_set_band_mode(const int bandmode);
 int lynq_query_available_bandmode(int availBanMode[]);
 int lynq_radio_on(const lynq_network_radio_on_type type);
 int lynq_query_radio_state(int *radio_state);
 int lynq_query_radio_tech(int* radioTech);
 int lynq_solicited_signal_strength(signalStrength_t *solSigStren);
 int lynq_set_ims(const int ims_mode);
 int lynq_wait_signalchanges(int *handle);
 int lynq_get_urc_info(const int handle,signalStrength_t *solSigStren,int *slot_id);

 typedef enum {
   LYNQ_CELL_INFO_TYPE_GSM    = 2,
   LYNQ_CELL_INFO_TYPE_WCDMA  = 3,
   LYNQ_CELL_INFO_TYPE_LTE    = 4,
   LYNQ_CELL_INFO_TYPE_NR    = 5
 } lynq_network_cell_info_type;

 int lynq_query_serve_cell_info(int serve_cell_info[MAX_CELLINFO_ITEM_NUMBER], int * valid_number);

 typedef enum {
     NETWORK_STATE_BUFFER_TYPE_VOICE_REG,
     NETWORK_STATE_BUFFER_TYPE_DATA_REG,
     NETWORK_STATE_BUFFER_TYPE_IMS_REG,
     NETWORK_STATE_BUFFER_TYPE_MAX,
 }lynq_network_state_buffer_type;
 int lynq_set_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type,int valid_period);
 int lynq_get_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type);
 #ifdef MODEM_GEN97
 /**@brief set or get OOS recover timer interval
 * @param mode [IN] <mode>:
 *  0:set
 *  1:get
 * @param interval [IN] <interval>: the recovery timer interval.
 *  field:
 *    T1,T2,...,T23:integer value 0~0xFFFFFFFF
 *    The length of time in seconds.
 *    defualt interval: 20,20,60,60,60,60,90,90,90,90,90,90,180,180,180,180,180,180,360,360,360,360,360
 * @param result [OUT] <result>: the recovery timer interval,when the mode is 1, this parameter is valid.

 * @return
 *  0:success
 *  other:failure
 */
 int lynq_oos_recover_timer_interval(int mode, char interval[LY_RECOVER_TIMER_INTERVAL],char result[LY_RECOVER_TIMER_INTERVAL]);
 /**@brief set deep sleep recover timer interval

 * @param recovery_threshold [IN] <recovery_threshold>: valid range 2-10  //After performing several rounds of normal recovery, deep sleep mode optimization will be applied

 * @param fullband_timer [IN] <fullband_timer>:valid range 90-360 //fullband intervarl length in deep sleep mode

 * @param sniffer_timer [IN] <sniffer_timer>:valid range 10-60 // sniffe intervarl length in deep sleep mode.

 * @param inactive_mode [IN] <inactive_mode>:
 *  0 Exit inactive mode
 *  1 enter inactive mode

 * @return
 *  0:success
 *  other:failure
 */
 int lynq_oos_deep_sleep_recover_timer_interval(int recovery_threshold,int fullband_timer,int sniffer_timer,int inactive_mode);
 #endif
 #if (defined MOBILETEK_TARGET_PLATFORM_T106) || (defined MODEM_GEN97)
 int lynq_set_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int valid_num);
 int lynq_get_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int* valid_num);
 #endif
 void lynq_set_test_mode(const int test_mode);
 #ifdef __cplusplus
 }
 #endif

 #endif
	#ifndef LYNQ_NETWORK_H
	#define LYNQ_NETWORK_H
	#ifdef __cplusplus
	extern "C" {
	#endif
	#define MODEM_GEN97 1
	#define CELLINFO_MAX_NUM 10
	#define LY_RECOVER_TIMER_INTERVAL 128
	#define MAX_CELLINFO_ITEM_NUMBER 32
	#define MAX_OOS_CFG_ITEM_NUMBER 32
	/T800 platform support gsm,wcdma lte,nr /
	typedef struct{
	int gw_sig_valid; /1 valid,1 invalid/
	int rssi; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
	int wcdma_sig_valid;/1 valid,0 invalid/
	int wcdma_signalstrength;
	int rscp; /* The Received Signal Code Power in dBm multipled by -1.
	* Range : 25 to 120
	* INT_MAX: 0x7FFFFFFF denotes invalid value.
	* Reference: 3GPP TS 25.123, section 9.1.1.1 */
	int ecno; /* Valid values are positive integers. This value is the actual Ec/Io multiplied
	* by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value
	* will be 125.*/
	int lte_sig_valid;/1 valid,0 invalid/
	int lte_signalstrength;
	int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1.
	* Range: 44 to 140 dBm
	* INT_MAX: 0x7FFFFFFF denotes invalid value.
	* Reference: 3GPP TS 36.133 9.1.4 */
	int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1.
	* Range: 20 to 3 dB.
	* INT_MAX: 0x7FFFFFFF denotes invalid value.
	* Reference: 3GPP TS 36.133 9.1.7 */
	int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units.
	* Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
	* INT_MAX : 0x7FFFFFFF denotes invalid value.
	* Reference: 3GPP TS 36.101 8.1.1 */
	int nr_sig_valid;/1 valid,0 invalid/
	int ssRsrp; /* SS(Synchronization Signal) reference signal received power, multipled by -1.
	* Reference: 3GPP TS 38.215.
	* Range [44, 140], INT_MAX means invalid/unreported.*/
	int ssRsrq; /* SS reference signal received quality, multipled by -1.
	* Reference: 3GPP TS 38.215.
	* Range [3, 20], INT_MAX means invalid/unreported.*/
	int ssSinr; /* SS signal-to-noise and interference ratio.
	* Reference: 3GPP TS 38.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
	* Range [-23, 40], INT_MAX means invalid/unreported.*/
	int csiRsrp; /* CSI reference signal received power, multipled by -1.
	* Reference: 3GPP TS 38.215.
	* Range [44, 140], INT_MAX means invalid/unreported.*/
	int csiRsrq; /* CSI reference signal received quality, multipled by -1.
	* Reference: 3GPP TS 38.215.
	* Range [3, 20], INT_MAX means invalid/unreported.*/
	int csiSinr; /* CSI signal-to-noise and interference ratio.
	* Reference: 3GPP TS 138.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
	* Range [-23, 40], INT_MAX means invalid/unreported.*/
	}signalStrength_t;

	typedef enum {
	NETWORK_RADIO_ON_TYPE_CFUN_0=0,
	NETWORK_RADIO_ON_TYPE_NORMAL_MODE=1,
	NETWORK_RADIO_ON_TYPE_FLIGHT_MODE=4,
	}lynq_network_radio_on_type;

	int lynq_network_init(int utoken);
	int lynq_network_deinit(void);
	int lynq_query_operater(char OperatorFN,char OperatorSH,char *MccMnc);
	int lynq_query_network_selection_mode(int *netselMode);
	int lynq_set_network_selection_mode(const char mode,const char mccmnc);
	int lynq_query_available_network(char OperatorFN,char OperatorSH,char MccMnc,char NetStatus);
	int lynq_query_registration_state(const char type,int regState,int* imsRegState,char * LAC,char * CID,int netType,int radioTechFam,int *netRejected);
	int lynq_query_prefferred_networktype(int *preNetType);
	int lynq_set_prefferred_networktype(const int preffertype);
	int lynq_query_cell_info(uint64_t cellinfo[CELLINFO_MAX_NUM],int tac[CELLINFO_MAX_NUM],int earfcn[CELLINFO_MAX_NUM],int * realNum);
	int lynq_set_unsol_cell_info_listrate(const int rate);
	int lynq_set_band_mode(const int bandmode);
	int lynq_query_available_bandmode(int availBanMode[]);
	int lynq_radio_on(const lynq_network_radio_on_type type);
	int lynq_query_radio_state(int *radio_state);
	int lynq_query_radio_tech(int* radioTech);
	int lynq_solicited_signal_strength(signalStrength_t *solSigStren);
	int lynq_set_ims(const int ims_mode);
	int lynq_wait_signalchanges(int *handle);
	int lynq_get_urc_info(const int handle,signalStrength_t solSigStren,int slot_id);

	typedef enum {
	LYNQ_CELL_INFO_TYPE_GSM = 2,
	LYNQ_CELL_INFO_TYPE_WCDMA = 3,
	LYNQ_CELL_INFO_TYPE_LTE = 4,
	LYNQ_CELL_INFO_TYPE_NR = 5
	} lynq_network_cell_info_type;

	int lynq_query_serve_cell_info(int serve_cell_info[MAX_CELLINFO_ITEM_NUMBER], int * valid_number);

	typedef enum {
	NETWORK_STATE_BUFFER_TYPE_VOICE_REG,
	NETWORK_STATE_BUFFER_TYPE_DATA_REG,
	NETWORK_STATE_BUFFER_TYPE_IMS_REG,
	NETWORK_STATE_BUFFER_TYPE_MAX,
	}lynq_network_state_buffer_type;
	int lynq_set_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type,int valid_period);
	int lynq_get_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type);
	#ifdef MODEM_GEN97
	/**@brief set or get OOS recover timer interval
	* @param mode [IN] <mode>:
	* 0:set
	* 1:get
	* @param interval [IN] <interval>: the recovery timer interval.
	* field:
	* T1,T2,...,T23:integer value 0~0xFFFFFFFF
	* The length of time in seconds.
	* defualt interval: 20,20,60,60,60,60,90,90,90,90,90,90,180,180,180,180,180,180,360,360,360,360,360
	* @param result [OUT] <result>: the recovery timer interval,when the mode is 1, this parameter is valid.

	* @return
	* 0:success
	* other:failure
	*/
	int lynq_oos_recover_timer_interval(int mode, char interval[LY_RECOVER_TIMER_INTERVAL],char result[LY_RECOVER_TIMER_INTERVAL]);
	/**@brief set deep sleep recover timer interval

	* @param recovery_threshold [IN] <recovery_threshold>: valid range 2-10 //After performing several rounds of normal recovery, deep sleep mode optimization will be applied

	* @param fullband_timer [IN] <fullband_timer>:valid range 90-360 //fullband intervarl length in deep sleep mode

	* @param sniffer_timer [IN] <sniffer_timer>:valid range 10-60 // sniffe intervarl length in deep sleep mode.

	* @param inactive_mode [IN] <inactive_mode>:
	* 0 Exit inactive mode
	* 1 enter inactive mode

	* @return
	* 0:success
	* other:failure
	*/
	int lynq_oos_deep_sleep_recover_timer_interval(int recovery_threshold,int fullband_timer,int sniffer_timer,int inactive_mode);
	#endif
	#if (defined MOBILETEK_TARGET_PLATFORM_T106) \|\| (defined MODEM_GEN97)
	int lynq_set_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int valid_num);
	int lynq_get_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int* valid_num);
	#endif
	void lynq_set_test_mode(const int test_mode);
	#ifdef __cplusplus
	}
	#endif

	#endif