Add T106 header file.
Change-Id: I139abf126f194dc011d5cdf531722152f90a1e90
diff --git a/mbtk/include/lynq/lynq_network.h b/mbtk/include/lynq/lynq_network.h
new file mode 100755
index 0000000..e878e6b
--- /dev/null
+++ b/mbtk/include/lynq/lynq_network.h
@@ -0,0 +1,147 @@
+#ifndef LYNQ_NETWORK_H
+#define LYNQ_NETWORK_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define MODEM_GEN97 1
+#define CELLINFO_MAX_NUM 10
+#define LY_RECOVER_TIMER_INTERVAL 128
+#define MAX_CELLINFO_ITEM_NUMBER 32
+#define MAX_OOS_CFG_ITEM_NUMBER 32
+/*T800 platform support gsm,wcdma lte,nr */
+typedef struct{
+ int gw_sig_valid; /*1 valid,1 invalid*/
+ int rssi; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
+ int wcdma_sig_valid;/*1 valid,0 invalid*/
+ int wcdma_signalstrength;
+ int rscp; /* The Received Signal Code Power in dBm multipled by -1.
+ * Range : 25 to 120
+ * INT_MAX: 0x7FFFFFFF denotes invalid value.
+ * Reference: 3GPP TS 25.123, section 9.1.1.1 */
+ int ecno; /* Valid values are positive integers. This value is the actual Ec/Io multiplied
+ * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value
+ * will be 125.*/
+ int lte_sig_valid;/*1 valid,0 invalid*/
+ int lte_signalstrength;
+ int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1.
+ * Range: 44 to 140 dBm
+ * INT_MAX: 0x7FFFFFFF denotes invalid value.
+ * Reference: 3GPP TS 36.133 9.1.4 */
+ int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1.
+ * Range: 20 to 3 dB.
+ * INT_MAX: 0x7FFFFFFF denotes invalid value.
+ * Reference: 3GPP TS 36.133 9.1.7 */
+ int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units.
+ * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
+ * INT_MAX : 0x7FFFFFFF denotes invalid value.
+ * Reference: 3GPP TS 36.101 8.1.1 */
+ int nr_sig_valid;/*1 valid,0 invalid*/
+ int ssRsrp; /* SS(Synchronization Signal) reference signal received power, multipled by -1.
+ * Reference: 3GPP TS 38.215.
+ * Range [44, 140], INT_MAX means invalid/unreported.*/
+ int ssRsrq; /* SS reference signal received quality, multipled by -1.
+ * Reference: 3GPP TS 38.215.
+ * Range [3, 20], INT_MAX means invalid/unreported.*/
+ int ssSinr; /* SS signal-to-noise and interference ratio.
+ * Reference: 3GPP TS 38.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
+ * Range [-23, 40], INT_MAX means invalid/unreported.*/
+ int csiRsrp; /* CSI reference signal received power, multipled by -1.
+ * Reference: 3GPP TS 38.215.
+ * Range [44, 140], INT_MAX means invalid/unreported.*/
+ int csiRsrq; /* CSI reference signal received quality, multipled by -1.
+ * Reference: 3GPP TS 38.215.
+ * Range [3, 20], INT_MAX means invalid/unreported.*/
+ int csiSinr; /* CSI signal-to-noise and interference ratio.
+ * Reference: 3GPP TS 138.215 section 5.1.*, 3GPP TS 38.133 section 10.1.16.1.
+ * Range [-23, 40], INT_MAX means invalid/unreported.*/
+}signalStrength_t;
+
+typedef enum {
+ NETWORK_RADIO_ON_TYPE_CFUN_0=0,
+ NETWORK_RADIO_ON_TYPE_NORMAL_MODE=1,
+ NETWORK_RADIO_ON_TYPE_FLIGHT_MODE=4,
+}lynq_network_radio_on_type;
+
+int lynq_network_init(int utoken);
+int lynq_network_deinit(void);
+int lynq_query_operater(char *OperatorFN,char *OperatorSH,char *MccMnc);
+int lynq_query_network_selection_mode(int *netselMode);
+int lynq_set_network_selection_mode(const char *mode,const char* mccmnc);
+int lynq_query_available_network(char *OperatorFN,char *OperatorSH,char *MccMnc,char * NetStatus);
+int lynq_query_registration_state(const char *type,int* regState,int* imsRegState,char * LAC,char * CID,int *netType,int *radioTechFam,int *netRejected);
+int lynq_query_prefferred_networktype(int *preNetType);
+int lynq_set_prefferred_networktype(const int preffertype);
+int lynq_query_cell_info(uint64_t cellinfo[CELLINFO_MAX_NUM],int tac[CELLINFO_MAX_NUM],int earfcn[CELLINFO_MAX_NUM],int * realNum);
+int lynq_set_unsol_cell_info_listrate(const int rate);
+int lynq_set_band_mode(const int bandmode);
+int lynq_query_available_bandmode(int availBanMode[]);
+int lynq_radio_on(const lynq_network_radio_on_type type);
+int lynq_query_radio_state(int *radio_state);
+int lynq_query_radio_tech(int* radioTech);
+int lynq_solicited_signal_strength(signalStrength_t *solSigStren);
+int lynq_set_ims(const int ims_mode);
+int lynq_wait_signalchanges(int *handle);
+int lynq_get_urc_info(const int handle,signalStrength_t *solSigStren,int *slot_id);
+
+typedef enum {
+ LYNQ_CELL_INFO_TYPE_GSM = 2,
+ LYNQ_CELL_INFO_TYPE_WCDMA = 3,
+ LYNQ_CELL_INFO_TYPE_LTE = 4,
+ LYNQ_CELL_INFO_TYPE_NR = 5
+} lynq_network_cell_info_type;
+
+int lynq_query_serve_cell_info(int serve_cell_info[MAX_CELLINFO_ITEM_NUMBER], int * valid_number);
+
+typedef enum {
+ NETWORK_STATE_BUFFER_TYPE_VOICE_REG,
+ NETWORK_STATE_BUFFER_TYPE_DATA_REG,
+ NETWORK_STATE_BUFFER_TYPE_IMS_REG,
+ NETWORK_STATE_BUFFER_TYPE_MAX,
+}lynq_network_state_buffer_type;
+int lynq_set_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type,int valid_period);
+int lynq_get_state_buffer_valid_period_of_network(lynq_network_state_buffer_type type);
+#ifdef MODEM_GEN97
+/**@brief set or get OOS recover timer interval
+* @param mode [IN] <mode>:
+* 0:set
+* 1:get
+* @param interval [IN] <interval>: the recovery timer interval.
+* field:
+* T1,T2,...,T23:integer value 0~0xFFFFFFFF
+* The length of time in seconds.
+* defualt interval: 20,20,60,60,60,60,90,90,90,90,90,90,180,180,180,180,180,180,360,360,360,360,360
+* @param result [OUT] <result>: the recovery timer interval,when the mode is 1, this parameter is valid.
+
+* @return
+* 0:success
+* other:failure
+*/
+int lynq_oos_recover_timer_interval(int mode, char interval[LY_RECOVER_TIMER_INTERVAL],char result[LY_RECOVER_TIMER_INTERVAL]);
+/**@brief set deep sleep recover timer interval
+
+* @param recovery_threshold [IN] <recovery_threshold>: valid range 2-10 //After performing several rounds of normal recovery, deep sleep mode optimization will be applied
+
+* @param fullband_timer [IN] <fullband_timer>:valid range 90-360 //fullband intervarl length in deep sleep mode
+
+* @param sniffer_timer [IN] <sniffer_timer>:valid range 10-60 // sniffe intervarl length in deep sleep mode.
+
+* @param inactive_mode [IN] <inactive_mode>:
+* 0 Exit inactive mode
+* 1 enter inactive mode
+
+* @return
+* 0:success
+* other:failure
+*/
+int lynq_oos_deep_sleep_recover_timer_interval(int recovery_threshold,int fullband_timer,int sniffer_timer,int inactive_mode);
+#endif
+#if (defined MOBILETEK_TARGET_PLATFORM_T106) || (defined MODEM_GEN97)
+int lynq_set_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int valid_num);
+int lynq_get_oos_net_scan_cfg(int config_list[MAX_OOS_CFG_ITEM_NUMBER], int* valid_num);
+#endif
+void lynq_set_test_mode(const int test_mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif