mbtk/libmbtk_factory/mbtk_gpio.c

/**
 *   \file gpio-test.c
 *   \brief A Documented file.
 *
 *  Detailed description
 *   \Author:  Sniper <js.wang@mobiletek.cn>
 *   \Version: 1.0.0
 *   \Date: 2022-04-26
 */
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <errno.h>
#include <limits.h>
#include <sys/wait.h>
#include <unistd.h>
#include <sys/mount.h>
#include "mbtk_log.h"
#include <sys/mman.h>
#include <ctype.h>
#include <cutils/properties.h>
#include "mbtk_gpio_def.h"
#include "gpio-define.h"

#define gpio_log(...)     if(gpio_debug)printf(__VA_ARGS__)
#define HWMAP_DEVICE "/dev/hwmap"
#define PAGE_OFFS_BITS(pgsz) ((unsigned int)(pgsz)-1)
#define PAGE_MASK_BITS(pgsz) (~PAGE_OFFS_BITS(pgsz))
#define STR_MAX_LEN 220
typedef enum {
    MBTK_ADC0 = 0,  /* ADC 0 */
    MBTK_ADC1       /* ADC 1 */
} mbtk_adc_enum;

static int gpio_debug = 0;

/**/
#define GPIO_MAX_CURRENT     (7<<10)  //设置GPIO最大输出电流
#define GPIO_STRONG_PULLUP   (1<<3)   //设置GPIO强上拉
#define GPIO_PULLUP_ENABLE   ((1<<15)|(1<<14)) //GPIO上拉
#define GPIO_PULLDOWN_ENABLE ((1<<15)|1<<13) //GPIO下拉

#define MBTK_GPIO_OUTPUT 1
#define MBTK_GPIO_INPUT  0

#if (defined(MBTK_PROJECT_L508_X6) || defined(MBTK_PROJECT_T108))
struct gpio_register_function gpio_func_register[128] = {
    {GPIO_FUNC_GPIO_00, 0},
    {GPIO_FUNC_GPIO_01, 0},
    {GPIO_FUNC_GPIO_02, 0},
    {GPIO_FUNC_GPIO_03, 0},
    {GPIO_FUNC_GPIO_04, 0},
    {GPIO_FUNC_GPIO_05, 0},
    {GPIO_FUNC_GPIO_06, 0},
    {GPIO_FUNC_GPIO_07, 0},
    {GPIO_FUNC_GPIO_08, 0},
    {GPIO_FUNC_GPIO_09, 0},
    {GPIO_FUNC_GPIO_10, 0},
    {GPIO_FUNC_GPIO_11, 0},
    {GPIO_FUNC_GPIO_12, 0},
    {GPIO_FUNC_GPIO_13, 0},
    {GPIO_FUNC_GPIO_14, 0},
    {GPIO_FUNC_GPIO_15, 0},
    {GPIO_FUNC_GPIO_16, 0},
    {GPIO_FUNC_GPIO_17, 0},
    {GPIO_FUNC_GPIO_18, 0},
    {GPIO_FUNC_GPIO_19, 0},
    {GPIO_FUNC_GPIO_20, 0},
    {GPIO_FUNC_GPIO_21, 0},
    {GPIO_FUNC_GPIO_22, 0},
    {GPIO_FUNC_GPIO_23, 0},
    {GPIO_FUNC_GPIO_24, 0},
    {GPIO_FUNC_GPIO_25, 0},
    {GPIO_FUNC_GPIO_26, 0},
    {GPIO_FUNC_GPIO_27, 0},
    {GPIO_FUNC_GPIO_28, 0},
    {GPIO_FUNC_GPIO_29, 0},
    {GPIO_FUNC_GPIO_30, 0},
    {GPIO_FUNC_GPIO_31, 0},
    {GPIO_FUNC_GPIO_32, 0},
    {GPIO_FUNC_GPIO_33, 0},
    {GPIO_FUNC_GPIO_34, 0},
    {GPIO_FUNC_GPIO_35, 0},
    {GPIO_FUNC_GPIO_36, 0},
	{GPIO_FUNC_GPIO_37, 0}, // GPIO_37
    {GPIO_FUNC_GPIO_38, 0}, // GPIO_38
    {GPIO_FUNC_GPIO_39, 0}, // GPIO_39
    {GPIO_FUNC_GPIO_40, 0}, // GPIO_40
    {GPIO_FUNC_GPIO_41, 0},  //GPIO_41
    {GPIO_FUNC_GPIO_42, 0},  //GPIO_42
    {GPIO_FUNC_GPIO_43, 0},  //GPIO_43
    {GPIO_FUNC_GPIO_44,0},	//GPIO_44
	{GPIO_FUNC_GPIO_45,0},	//GPIO_45
	{GPIO_FUNC_GPIO_46,0},		//GPIO_46
	{GPIO_FUNC_GPIO_47,0},		//GPIO_47
    {GPIO_FUNC_SDIO_DAT3, 1}, //GPIO_48
    {GPIO_FUNC_GPIO_49, 0},
    {GPIO_FUNC_GPIO_50, 0},
    {GPIO_FUNC_GPIO_51, 0},
    {GPIO_FUNC_GPIO_52, 0},
    {GPIO_FUNC_GPIO_53, 0},
    {GPIO_FUNC_GPIO_54, 0},
    {GPIO_FUNC_SDIO_DAT2, 1}, //GPIO_55
    {GPIO_FUNC_SDIO_DAT1, 1}, //GPIO_56
    {GPIO_FUNC_SDIO_DAT0, 1}, //GPIO_57
    {GPIO_FUNC_SDIO_CMD, 1},  //GPIO_58
    {GPIO_FUNC_SDIO_CLK, 1},  //GPIO_59
    {GPIO_FUNC_GPIO_60, 0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},
    {GPIO_FUNC_DVL_0, 1},//GPIO_67
    {GPIO_FUNC_DVL_1, 1},//GPIO_68
    {GPIO_FUNC_GPIO_69, 0},
    {GPIO_FUNC_GPIO_70, 0},
    {GPIO_FUNC_QSPI_DAT3, 1}, //GPIO_71
    {GPIO_FUNC_QSPI_DAT2, 1}, //GPIO_72
    {GPIO_FUNC_QSPI_DAT1, 1}, //GPIO_73
    {GPIO_FUNC_QSPI_DAT0, 1}, //GPIO_74
    {GPIO_FUNC_QSPI_CLK, 1},  //GPIO_75
    {GPIO_FUNC_QSPI_CS1, 1},  //GPIO_76
    {GPIO_FUNC_GPIO_77, 0},
    {GPIO_FUNC_GPIO_78, 0},
    {GPIO_FUNC_GPIO_79, 0},
    {GPIO_FUNC_GPIO_80, 0},
    {GPIO_FUNC_USIM_UCLK, 1},//GPIO_81
    {GPIO_FUNC_USIM_UIO, 1},//GPIO_82
    {GPIO_FUNC_USIM_URSTn, 1},//GPIO_83
	
    {GPIO_FUNC_MMC1_DAT3,5},			//GPIO_84
	{GPIO_FUNC_MMC1_DAT2,5},			//GPIO_85
	{GPIO_FUNC_MMC1_DAT1,5},			//GPIO_86
	{GPIO_FUNC_MMC1_DAT0,5},			//GPIO_87
    {GPIO_FUNC_MMC1_CMD,5},			//GPIO_88
	{GPIO_FUNC_MMC1_CLK,5},			//GPIO_89
	{GPIO_FUNC_MMC1_CD,1},						//GPIO_90
	{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},
    {GPIO_FUNC_USB_ID, 1},//GPIO_99
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},
    {GPIO_FUNC_PRI_TDI, 1},         //GPIO_117
    {GPIO_FUNC_PRI_TMS, 1},         //GPIO_118
    {GPIO_FUNC_PRI_TCK, 1},         //GPIO_119
    {GPIO_FUNC_PRI_TDO, 1},         //GPIO_120
    {GPIO_FUNC_QSPI_VMODE_GPIO, 1}, //GPIO_121
    {GPIO_FUNC_VBUS_DRV, 1},        //GPIO_122
    {GPIO_FUNC_CLK_REQ, 1},         //GPIO_123
    {0,0},
    {GPIO_FUNC_VCXO_REQ, 1},        //GPIO_125
	{0,0},							//GPIO_126
    {GPIO_FUNC_VCXO_OUT, 1},        //GPIO_127
    {0,0},
};

#else
struct gpio_register_function gpio_func_register[128] = {
    {GPIO_FUNC_GPIO_00, 0},
    {GPIO_FUNC_GPIO_01, 0},
    {GPIO_FUNC_GPIO_02, 0},
    {GPIO_FUNC_GPIO_03, 0},
    {GPIO_FUNC_GPIO_04, 0},
    {GPIO_FUNC_GPIO_05, 0},
    {GPIO_FUNC_GPIO_06, 0},
    {GPIO_FUNC_GPIO_07, 0},
    {GPIO_FUNC_GPIO_08, 0},
    {GPIO_FUNC_GPIO_09, 0},
    {GPIO_FUNC_GPIO_10, 0},
    {GPIO_FUNC_GPIO_11, 0},
    {GPIO_FUNC_GPIO_12, 0},
    {GPIO_FUNC_GPIO_13, 0},
    {GPIO_FUNC_GPIO_14, 0},
    {GPIO_FUNC_GPIO_15, 0},
    {GPIO_FUNC_GPIO_16, 0},
    {GPIO_FUNC_GPIO_17, 0},
    {GPIO_FUNC_GPIO_18, 0},
    {GPIO_FUNC_GPIO_19, 0},
    {GPIO_FUNC_GPIO_20, 0},
    {GPIO_FUNC_GPIO_21, 0},
    {GPIO_FUNC_GPIO_22, 0},
    {GPIO_FUNC_GPIO_23, 0},
    {GPIO_FUNC_GPIO_24, 0},
    {GPIO_FUNC_GPIO_25, 0},
    {GPIO_FUNC_GPIO_26, 0},
    {GPIO_FUNC_GPIO_27, 0},
    {GPIO_FUNC_GPIO_28, 0},
    {GPIO_FUNC_GPIO_29, 0},
    {GPIO_FUNC_GPIO_30, 0},
    {GPIO_FUNC_GPIO_31, 0},
    {GPIO_FUNC_GPIO_32, 0},
    {GPIO_FUNC_GPIO_33, 0},
    {GPIO_FUNC_GPIO_34, 0},
    {GPIO_FUNC_GPIO_35, 0},
    {GPIO_FUNC_GPIO_36,   0},
    {GPIO_FUNC_MMC1_DAT3, 5}, // GPIO_37
    {GPIO_FUNC_MMC1_DAT2, 5}, // GPIO_38
    {GPIO_FUNC_MMC1_DAT1, 5}, // GPIO_39
    {GPIO_FUNC_MMC1_DAT0, 5}, // GPIO_40
    {GPIO_FUNC_MMC1_CMD, 5},  //GPIO_41
    {GPIO_FUNC_MMC1_CLK, 5},  //GPIO_42
    {GPIO_FUNC_MMC1_CD , 1},  //GPIO_43
    {0,0},{0,0},{0,0},{0,0},
    {GPIO_FUNC_SDIO_DAT3, 1}, //GPIO_48
    {GPIO_FUNC_GPIO_49, 0},
    {GPIO_FUNC_GPIO_50, 0},
    {GPIO_FUNC_GPIO_51, 0},
    {GPIO_FUNC_GPIO_52, 0},
    {GPIO_FUNC_GPIO_53, 0},
    {GPIO_FUNC_GPIO_54, 0},
    {GPIO_FUNC_SDIO_DAT2, 1}, //GPIO_55
    {GPIO_FUNC_SDIO_DAT1, 1}, //GPIO_56
    {GPIO_FUNC_SDIO_DAT0, 1}, //GPIO_57
    {GPIO_FUNC_SDIO_CMD, 1},  //GPIO_58
    {GPIO_FUNC_SDIO_CLK, 1},  //GPIO_59
    {GPIO_FUNC_GPIO_60, 0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},
    {GPIO_FUNC_DVL_0, 1},//GPIO_67
    {GPIO_FUNC_DVL_1, 1},//GPIO_68
    {GPIO_FUNC_GPIO_69, 0},
    {GPIO_FUNC_GPIO_70, 0},
    {GPIO_FUNC_QSPI_DAT3, 1}, //GPIO_71
    {GPIO_FUNC_QSPI_DAT2, 1}, //GPIO_72
    {GPIO_FUNC_QSPI_DAT1, 1}, //GPIO_73
    {GPIO_FUNC_QSPI_DAT0, 1}, //GPIO_74
    {GPIO_FUNC_QSPI_CLK, 1},  //GPIO_75
    {GPIO_FUNC_QSPI_CS1, 1},  //GPIO_76
    {GPIO_FUNC_GPIO_77, 0},
    {GPIO_FUNC_GPIO_78, 0},
    {GPIO_FUNC_GPIO_79, 0},
    {GPIO_FUNC_GPIO_80, 0},
    {GPIO_FUNC_USIM_UCLK, 1},//GPIO_81
    {GPIO_FUNC_USIM_UIO, 1},//GPIO_82
    {GPIO_FUNC_USIM_URSTn, 1},//GPIO_83
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},
    {GPIO_FUNC_USB_ID, 1},//GPIO_99
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},{0,0},{0,0},{0,0},
    {0,0},
    {GPIO_FUNC_PRI_TDI, 1},         //GPIO_117
    {GPIO_FUNC_PRI_TMS, 1},         //GPIO_118
    {GPIO_FUNC_PRI_TCK, 1},         //GPIO_119
    {GPIO_FUNC_PRI_TDO, 1},         //GPIO_120
    {GPIO_FUNC_QSPI_VMODE_GPIO, 1}, //GPIO_121
    {GPIO_FUNC_VBUS_DRV, 1},        //GPIO_122
    {GPIO_FUNC_CLK_REQ, 1},         //GPIO_123
    {0,0},
    {GPIO_FUNC_VCXO_REQ, 1},        //GPIO_125
    {GPIO_FUNC_VCXO_OUT, 1},        //GPIO_126
    {0,0},
};

#endif

static int mbtk_gpio_adc(channel)
{
    int ret = 0;

    ret =  mbtk_adc_get(channel);
    //printf("ADC_%d_value =%d\n", channel, ret);
    if(ret >= 500 ){
        ret = 1;
    }
    else if (ret>=0 && ret<=480){
        ret = 0;
    }
    else{
        ret = -1;
    }
    return ret;
}


static int hwacc_register(int rw, unsigned int addr, unsigned int *data)
{
	int fid;
	unsigned int pagesize, len, len_aligned;
	unsigned int addr_aligned;
	volatile unsigned int *pa;
	void *vpa;

	len = pagesize = sysconf(_SC_PAGESIZE);
	if((fid = open(HWMAP_DEVICE, O_RDWR)) < 0)
	{
		printf("Failed to open %s\n", HWMAP_DEVICE);
		exit(-1);
	}

	// Align the length so the mapped area is page-aligned and contains the requested area
	addr_aligned = addr & PAGE_MASK_BITS(pagesize);
	len_aligned =((addr + len - addr_aligned) + pagesize - 1) & PAGE_MASK_BITS(pagesize);

	/* Notes on flags: MAP_PRIVATE results in copy on write; MAP_SHARED allows normal write */
	/*   MAP_SHARED required O_RDWR in open above, otherwise mmap fails with errno=EACCES   */
	/* Notes on prot:  PROT_WRITE allows read and write; PROT_READ allows read only         */
	/* Notes on off: an unsigned 32-bit value, should be aligned to page size according to mmap manpage */
	if((vpa = mmap(0, len_aligned, PROT_READ|PROT_WRITE, MAP_SHARED, fid, addr_aligned)) == MAP_FAILED)
	{
		printf("mmap failed (%d)\n", errno);
	}
	else
	{
		pa = (volatile unsigned int *)((unsigned char *)vpa + (addr & PAGE_OFFS_BITS(pagesize)));
		if(rw == 0)
		{
			*data = *pa;
			gpio_log("Value read from 0x%.8x via MVA=0x%p is 0x%.8x\n", addr, pa, *data);
		}
		else if(rw == 1)
		{
			*pa = *data;
			gpio_log("Value %.8x written to 0x%.8x via MVA=0x%p\n", *data, addr, pa);
#if defined(HWACC_DEBUG)
			{
				unsigned int val;
				val = *pa;
				printf("Value read from 0x%.8x via MVA=0x%p is 0x%.8x\n", addr, pa, val);
			}
#endif
		}
		munmap(vpa, len);
	}

	close(fid);
	return 0;
}
/*
设置GPIO 模式：第一步读GPIO22默认function
root@OpenWrt:/# hwacc r 0xd401e134
Option = r Addr = d401e134
Value read from 0xd401e134 via MVA=0x0xb6fc3134 is 0x0000d040   //默认GPIO功能
Bit0~bit2值对应上面表格各function，0代表GPIO功能
 */
static int gpio_register_read(int reg)
{
    int ret = -1;
#if 0
    FILE * fp;
    // "/bin/hwacc r 0xd401e134";
    char command[36] = {0};
    char buffer[1024];
    int i = 0;

    sprintf(command, "/bin/hwacc r 0x%x", reg);
    fp = popen(command, "r");
    while(1)
    {
        if( fgets (buffer, sizeof(buffer), fp)!=NULL ) {
            buffer[strlen(buffer) - 1] = 0;
            // gpio_log("out [%d]: %s\n", strlen(buffer), buffer);
        }else{
            break;
        }
        i = strstr_n(buffer, "is");
        if(i)
        {
            ret = str_to_hex(&buffer[i + 2]);
            gpio_log("read 0x%x value:%s, %x\n", reg, &buffer[i + 2], ret);
        }
    }
    pclose(fp);
#else
#ifndef MBTK_PROJECT_PN1803
    usleep(50);
#endif
    hwacc_register(0, reg, &ret);
#ifndef MBTK_PROJECT_PN1803
    usleep(50);
#endif	
#endif
    return ret;
}
/*
设置输入输出状态，设置PDR寄存器GPIO22为output
root@OpenWrt:/# hwacc w 0xD401900c 0x00c03800
Option = w Addr = d401900c Data=00c03800
Value 00c03800 written to 0xd401900c via MVA=0x0xb6f9f00c
 */
static void gpio_register_write(int reg, int value)
{
#if 0
    FILE * fp;
    //  "/bin/hwacc w 0xD401900c 0x00c03800"
    char command[36] = {0};
    char buffer[1024];

    sprintf(command, "/bin/hwacc w 0x%x 0x%x", reg, value);
    gpio_log("command: %s\n", command);
    fp = popen(command, "r");
    while(1)
    {
        if( fgets (buffer, sizeof(buffer), fp)!=NULL ) {
            gpio_log("%s\n", buffer);
        }else{
            break;
        }
    }
    pclose(fp);

#else
#ifndef MBTK_PROJECT_PN1803
    usleep(50);
#endif
    hwacc_register(1, reg, &value);
#ifndef MBTK_PROJECT_PN1803
    usleep(50);
#endif
#endif
}
/*
AF SEL<p>This field is used for alternate function selection for a pin.
It selects between the eight possible alternate functions for the pin.
Alternate function 0 is always the reset case.

<p>0x0 = Alternate function 0 (primary function at reset)
<p>0x1 = Alternate function 1
<p>0x2 = Alternate function 2
<p>0x3 = Alternate function 3
<p>0x4 = Alternate function 4
<p>0x5 = Alternate function 5
<p>0x6 = Alternate function 6
<p>0x7 = Alternate function 7
 */
static int gpio_register_set_func_0(int port)
{
    int ret;
    struct gpio_register_function *reg = NULL;
    if(port > 128)
        return -1;
    reg = &gpio_func_register[port];
    if(0 == reg->reg)
        return -1;
    ret = gpio_register_read(reg->reg);
    if((ret & 0x7) != reg->func_gpio)
    {
        //printf("Gpio set func [%d] [0x%x]!\n", reg->func_gpio, (ret & 0xfffffff8) | reg->func_gpio);
        gpio_register_write(reg->reg, (ret & 0xfffffff8) | reg->func_gpio);
    }
    return 0;
}
/*
设置GPIO  方向
读取输入输出状态，读PDR寄存器：0x0c
root@OpenWrt:/# hwacc r 0xD401900c
Option = r Addr = d401900c
Value read from 0xd401900c via MVA=0x0xb6f3900c is 0x00803800  //bit22为0，代表Input
 */
static void gpio_register_set_direction(int port, int dir)
{
    int ret;
    int reg = 0xD4019000;

    if(port > (32 - 1))
        reg = 0xD4019004;
    if(port > (32 * 2 - 1))
        reg = 0xD4019008;
    if(port > (32 * 3 - 1))
        reg = 0xD4019100;

    reg += 0x0c;
    port = port % 0x20;
    ret = gpio_register_read(reg);
    //printf("[Direction] reg_value=%x\n", ret);
    // 设置 输出 0 && 1
    if(!(ret & (0x1 << port)) && dir)
    {
        gpio_register_write(reg, ret | (0x1 << port));  //set the gpio bit
        //printf("[Direction out] reg_value=%x\n",  gpio_register_read(reg));
    }
    // 设置 输入 1 && 0
    if((ret & (0x1 << port)) && !dir)
    {
#if 1		
        gpio_register_write(reg, ret & (~(0x1 << port)));  //clear the gpio bit,mbtk_tanggaoyou
#else    
	     gpio_register_write(reg, ret | !(0x1 << port)); //这是错误配置，实际没有任何作用，还是原来的值
#endif	
        //printf("[Direction in] reg_value=%x\n",  gpio_register_read(reg));
    }
}
/*
设置GPIO 输出电平

读取电平状态，先读PLR寄存器：0x00
root@OpenWrt:/# hwacc r 0xD4019000
Option = r Addr = d4019000
Value read from 0xd4019000 via MVA=0x0xb6f1c000 is 0x81e82a30
对应下面具体BIT
1000 0001 1110 1000 0010 1010 0011 0000   BIT22默认电平高

设置输出高：设置PSR寄存器：0x18（只写寄存器）
root@OpenWrt:/# hwacc w 0xD4019018 0x400000
Option = w Addr = d4019018 Data=00400000
Value 00400000 written to 0xd4019018 via MVA=0x0xb6f56018 //bit22写1，输出高

设置输出低：设置PCR寄存器：0x24
root@OpenWrt:/# hwacc w 0xD4019024 0x400000
Option = w Addr = d4019024 Data=00400000
Value 00400000 written to 0xd4019024 via MVA=0x0xb6faa024   //Bit22写1，GPIO22输出低

 */
static void gpio_register_set_value(int port, int value)
{
    int ret;
    int reg = 0xD4019000;

    if(port > (32 - 1))
        reg = 0xD4019004;
    if(port > (32 * 2 - 1))
        reg = 0xD4019008;
    if(port > (32 * 3 - 1))
        reg = 0xD4019100;

    if(value)
    {
        reg += 0x18;
    }
    else
        reg += 0x24;

    port = port % 0x20;
    ret = gpio_register_read(reg);
    //printf("[Value] reg_value=%x\n", gpio_register_read(0xD4019004));
    // 设置 高电平 0 && 1
    if(value)
    {
        gpio_register_write(reg, ret | (0x1 << port));
        //printf("[Value high] reg_value=%x\n", gpio_register_read(0xD4019004));
        return;
    }
    // 设置 低电平 1 && 0
    if(!(ret & (0x1 << port)) && !value)
    {
        gpio_register_write(reg, ret | (0x1 << port));
        //printf("[Value low] reg_value=%x\n", gpio_register_read(0xD4019004));
    }
}
/*
读取电平状态，先读PLR寄存器：0x00
root@OpenWrt:/# hwacc r 0xD4019000
Option = r Addr = d4019000
Value read from 0xd4019000 via MVA=0x0xb6f1c000 is 0x81e82a30
对应下面具体BIT
1000 0001 1110 1000 0010 1010 0011 0000   BIT22默认电平高
 */
static int gpio_register_get_value(int port)
{
    int ret = -1;
    int reg = 0xD4019000;

    if(port > (32 - 1))
        reg = 0xD4019004;
    if(port > (32 * 2 - 1))
        reg = 0xD4019008;
    if(port > (32 * 3 - 1))
        reg = 0xD4019100;
    port = port % 0x20;
    ret = gpio_register_read(reg);
    if(ret & (0x1 << port))
    {
        return 1;
    }
    return 0;
}

void gpio_debug_set(int enable)
{
    gpio_debug = enable;
}



#if defined(MBTK_PROJECT_PN1803)
int gpio_register_test_out(int port, int value)
{
    int ret;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    //printf("Gpio port [%d] test start!\n", port);
    ret = gpio_register_set_func_0(port);           //设功能为GPIO
    if(ret){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port, 1);           //设方向为输出
    ret = gpio_register_get_value(port);
    //printf("gpio default value is : %d.\n", ret);
    
    
    //[High]
    for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 1);
        usleep(50);
        valueh = gpio_register_get_value(port);
        //printf("set high? %d\n",valueh);
        if(1 == valueh){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(0);  
        usleep(3000);
        if(1 == ret){
            break;
        }
    }
    if(1 != ret){
        ret=-1;
        goto exit;
    }
    printf("******gpio should is high: %d.******\n", ret);


    //[Low]
     usleep(200);
     for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 0);               //输出低
        usleep(50);
        valuel = gpio_register_get_value(port);
        //printf("set low? %d\n",valuel);
        if(0 == valuel){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(0);  
        usleep(3000);
        if(0 == ret){
            break;
        }
    }
    printf("******gpio should is low: %d.******\n", ret);
    if(0 != ret){
        ret=-1;
        goto exit;
    }

exit:
    //gpio_register_set_direction(port, 0);  //设方向为输入
    return ret;
}

int mbtk_at_gpio(void* arg)
{
    int test_gpio[] = {
     56, 55, 58, 57, 48, 59, 12, 20, 5, 43, 21,
     49, 50, 27, 28, 26, 25, 16, 17, 15, 126, 125,
      4,  0, 3, 18, 7, 6, 1, 2, /*54,*/ 19, 13,
     32, 31, 23, 24, 22, /*122,*/ 33, 35, 36, 34, 14,
     99,/* 53,*/ 37, 38, 39, 40, 41, 42};

    int i, j, ret, total, n = 0;
    int *fail_io = (int *)arg;
    total = (sizeof(test_gpio)/sizeof(int));
    //printf("Start test gpio total: %d\n", total);
    
    /* [1 all gpio set to low] */
    for(j = 0; j < 6 ; j++){
        for(i = 0; i < total; i++){
            gpio_register_set_func_0(test_gpio[i]);
            gpio_register_set_direction(test_gpio[i], 1);
            gpio_register_set_value(test_gpio[i], 0);
        }
      //usleep(10000);
      for(i = 0; i <= 35; i++){
          ret = mbtk_gpio_adc(0);
          usleep(3000);
          if(0 == ret){
              break;
          }
      }
      printf("pre set ADC: %d, times: %d\n",ret, j);
      if(0 == ret){
          break;
      }
    }
	if(0 != ret){
		printf("Fail, please retest");
		return -1;
	}


    /* [2 GPIOTEST] */
    for(i = 0; i < total; i++){
        ret = gpio_register_test_out(test_gpio[i], 0);
        if(-1 == ret){
            printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio[i]);
            fail_io[n] = test_gpio[i];
            n++;
        }else{
            //printf("############gpio [%d] test success############\n", test_gpio[i]);
        }
    }
    mbtk_adc_close();
    return n;
}

#elif defined(MBTK_PROJECT_L508)

int test_gpio[] = 
{ 
	0,2,1,6,16,15,17,99,
	34,36,35,33,14,49,50,12,118,120,
	43,19,7,3,
	20,59,126,117,125,18,56,55,58,48,57,5,4,21,
	23,24,13,27,28,26,25,
	32,31,
	54,
	53,123,122
};
int total;
total = (sizeof(test_gpio)/sizeof(int));
	

int gpio_test_init(void)
{
	int i,j,ret;
	//int *fail_io = (int *)arg;
	printf("[init] L508 XX GPIOTEST v1.2 \n");
	system("i2cset -y -f 2 0x31 0x12 0x46");
	system("echo 53 > /sys/class/gpio/export");  //gnss uart rx
	system("echo out > /sys/class/gpio/gpio53/direction");
	system("echo 54 > /sys/class/gpio/export");//gnss uart tx
	system("echo out > /sys/class/gpio/gpio54/direction");
	system("echo 22 > /sys/class/gpio/export");//check pin

	gpio_register_set_func_0(22);
	gpio_register_set_direction(22, 1);	//输出

	usleep(500);		 
	/*
	GPIO22默认是上拉，如果改成GPIO输入模式，其PIN脚电压是高电平，必须改成下拉后GPIO22才处于低电平状态，否则测试PIN拉低失败
	*/	
	gpio_register_set_direction(22, MBTK_GPIO_INPUT);	//设置输入模式
	gpio_register_write(GPIO_FUNC_GPIO_22,0xb040);  //PULL DOWN


	/* [1 all gpio set to low] */
	for(j = 0; j < 6 ; j++){
		for(i = 0; i < total; i++){
			gpio_register_set_func_0(test_gpio[i]);
			gpio_register_set_direction(test_gpio[i], 1);
			gpio_register_set_value(test_gpio[i], 0);
		}

		for(i = 0; i <= 5; i++){
			ret = gpio_register_get_value(22);
			
			if(0 == ret){
				break;
			}
		
			usleep(3000);
		
		}
		
		printf("pre set ADC: %d, times: %d\n",ret, j);
		
		if(0 == ret){
			break;
		}
	}

	if(0 != ret){
		printf("set all low Fail, please retest\n");
		return -1;
	}
	
	printf("pre set SUCCESS\n");
	
	return 0;
}

int gpio_test(void* arg)
{
	int ret,i,j;
	int *fail_io = (int *)arg;
	int n = 0;
	int gpio_num = 0;
	for(i = 0; i < total; i++){	
	
		gpio_num = test_gpio[i];
		
		//ret = gpio_register_get_value(test_gpio[i]);
		//printf("GPIO%d default value? %d\n", test_gpio[i], ret);
		
		//set high
		gpio_register_set_value(gpio_num, 1);
		
		ret = gpio_register_get_value(gpio_num);
		
		printf("GPIO%d set high= %d\n", gpio_num, ret);
		
		//get 
		ret = gpio_register_get_value(22);
		
		if(1 != ret){
			printf("gpio [%d] test high failed\n", gpio_num);
			
			fail_io[n] = gpio_num;
			
			n++;
		}else{
			printf("gpio[%d] test high success\n", gpio_num);
		}

		//set low
		gpio_register_set_value(gpio_num, 0);
		
		//ret = gpio_register_get_value(test_gpio[i]);
		//printf("GPIO%d set low? %d\n", test_gpio[i], ret);
		
		//get 
		ret = gpio_register_get_value(22);
	
		if(0 != ret){
			printf("gpio [%d] test low failed\n", gpio_num);
			
			fail_io[n] = test_gpio[i];
			
			n++;
		}else{
			printf("gpio [%d] test low success\n", gpio_num);
		}
	}
	return n;
}
		
	


int mbtk_at_gpio(void* arg)
{
	int i, j, ret, total, n = 0;
	//int *fail_io = (int *)arg;

	n = gpio_test_init();
	
	if(-1 == n)
	{
	//return -1;
	}
	
	n = gpio_test(arg);

	system("echo 53 > /sys/class/gpio/unexport"); //unexport gnss uart rx
	system("echo 54 > /sys/class/gpio/unexport");//unexportgnss uart tx
	system("echo 22 > /sys/class/gpio/unexport");//unexportcheck pin

	printf("\n[GPIOTEST] Finished !!\n\n");
	
	return n;
}



#elif defined(MBTK_PROJECT_L509)
#define DEBUG_GPIO_TEST 0
mbtk_gpio_paired_info_struct  test_pin_array[] ={  //是GPIO_array
//output_pin, output_gpio,input_gpio,input_pin,test_result
//120 5 33 这几个输入脚没法正常设置为输入
    //{?,52,51,?,0},  //拉不低    没有这一组
    //{?,54,53,?,0},
    //Opin,Ogpio,Igpio,Ipin,res
    {122, 16,  17, 121, 0}, //output_pin, output_gpio,input_gpio,input_pin,test_result
    {1,   117, 120, 2, 0},  
    //{?,118,19,13,?,0},		//usim
    {5,   123,  126,  6,  0},
    {23,  43,   23,   62, 0},
    {24,  28,   27,   25, 0},
    {26,  26,   25,   27, 0},
    {37,  34,   33,   40, 0},    
    {38,  36,   35,   39, 0},
    {41,  49,   50,   42, 0},
    {64,  32,   31,   65, 0},
    {78,  7,    2,    73, 0},
    {77,  6,    1,    76, 0},      
    {81,  15,   3,    75, 0},      
    {74,  0,    18,   120,0},      
    {79,  4,    5,    82, 0},        
    {80,  13,   14,   84, 0},
    {129, 48,   55,   130,0},
    {131, 56,   57,   132,0},
    {133, 59,   58,   134,0},
    {135, 21,   99,   139,0},    
    //{?,20,22,?,0},  //拉不低
    //{?,12,122,?,0},  //拉不低    122好像不该用
};
//测低
uint16 mbtk_gpio_test_all_low(mbtk_gpio_paired_info_struct *pin_array, uint16 MAX_pin_num)
{
    uint16 index =0;
    uint16 OUT_pin, Read_pin;
    uint32 read_high_value;
    uint32 read_low_value;
    uint16 fail_num=0;
    int res;

    printf("[GPIOTEST][run test all pin low]\n");

   
    for(index = 0; index < MAX_pin_num; index++){
       OUT_pin = pin_array[index].output_gpio;
       Read_pin = pin_array[index].input_gpio;
    
       //输出低
       gpio_register_set_direction(OUT_pin,1);
       gpio_register_set_value(OUT_pin, 0);

       //输入脚设为输入
       gpio_register_set_direction(Read_pin,0);
   }
    
    for(index = 0; index < MAX_pin_num; index++){
        OUT_pin = pin_array[index].output_gpio;
        Read_pin = pin_array[index].input_gpio;
        read_low_value = gpio_register_get_value(Read_pin);
        //结果检测
        if(read_low_value != 0){
           printf("[GPIOTEST][!Low Failed!]: GPIO%d PIN%d\n", Read_pin,pin_array[index].input_pin);
           pin_array[index].mbtk_gpio_test_result = 1;
           fail_num ++;
        }
        else{
#if DEBUG_GPIO_TEST
            printf("[GPIOTEST][-Low Success-]: GPIO%d \n", Read_pin);
#endif
        }
    }
    return fail_num;

}



//测高
uint16 mbtk_gpio_test_pin_high(mbtk_gpio_paired_info_struct *pin_array,uint16 MAX_pin_num)
{
    uint16 index =0;
    uint16 OUT_pin, Read_pin;
    uint32 read_high_value;
    uint32 read_low_value;
    uint16 fail_num=0;
    int i = 0;

    printf("[GPIOTEST][run test pin high]\n");

    for(index = 0;index<MAX_pin_num;index++)
    {
        OUT_pin = pin_array[index].output_gpio;
        Read_pin = pin_array[index].input_gpio;

        //设高
        gpio_register_set_direction(OUT_pin,1);
        gpio_register_set_direction(Read_pin,0);
        gpio_register_set_value(OUT_pin, 1);
        usleep(20000);
        read_high_value = gpio_register_get_value(Read_pin);
#if DEBUG_GPIO_TEST
        printf("[GPIOTEST][test_high]: PIN%d: get value =%d \n", pin_array[index].input_pin, read_high_value);
#endif

        //设高后重新设低
        usleep(20000);
        gpio_register_set_value(OUT_pin, 0);
        usleep(80000);
        //read_low_value = gpio_register_get_value(Read_pin);
        //read_low_value = gpio_register_get_value(Read_pin);
        for(i = 0;i < 10; i++){
            read_low_value = gpio_register_get_value(Read_pin);
            if(0 == read_low_value){
                break;
            }
            usleep(20000);
        }
#if DEBUG_GPIO_TEST        
       printf("[GPIOTEST][test_low]: PIN%d: get value =%d  \n", pin_array[index].input_pin, read_low_value);
#endif
       if(read_high_value != 1||read_low_value !=0)
        {
               printf("[GPIOTEST][!High Failed!]: Gpio%d PIN%d\n",Read_pin,pin_array[index].input_pin);
               pin_array[index].mbtk_gpio_test_result = 2;
               fail_num ++;
        }
        else{
#if DEBUG_GPIO_TEST
            printf("[GPIOTEST][-High Success-]: Gpio%d \n", Read_pin);
#endif
        }
    }
 return fail_num;

}
void gpio_test_init_test_gpio_mode(mbtk_gpio_paired_info_struct pin_array[],int MAX_pin_num)
{
       int  index =0;
       int OUT_pin, Read_pin;

	printf("[GPIOTEST] L509 GPIOTEST v2.1 --init\n");

       for(index = 0;index<MAX_pin_num;index++)
        {
            OUT_pin = pin_array[index].output_gpio;
            Read_pin = pin_array[index].input_gpio;
            pin_array[index].mbtk_gpio_test_result = 0; //init as passed
            gpio_register_set_func_0(OUT_pin);
            gpio_register_set_func_0(Read_pin);
        }
        
	//gpio_register_set_func_0();
	system("i2cset -y -f 2 0x31 0x12 0x46");
	system("echo 33 > /sys/class/gpio/export");
	system("echo 120 > /sys/class/gpio/export");
	system("echo 126 > /sys/class/gpio/export");
	system("echo in > /sys/class/gpio/gpio126/direction");
	system("echo in > /sys/class/gpio/gpio120/direction");
	system("echo in > /sys/class/gpio/gpio5/direction");
	system("echo in > /sys/class/gpio/gpio33/direction");
#if DEBUG_GPIO_TEST
	printf("[GPIOTEST]gpio_test_init_test_gpio_mode FINISH\n");
#endif

}


int mbtk_at_gpio(void* arg)
{
	int i, num;
	int *fail_io = (int *)arg;
	/*OPEN SWITCH */
	uint16 test_fail_count = 0;
	uint16 test_MAX_pin_num = 0;
	char buf[STR_MAX_LEN];
	uint16 str_len=0;
	uint16 temp_len =0;
	uint16 Out_pin;
	uint16 in_pin;
	uint16 fail_print_num = 0;

	gpio_register_set_func_0(125);
	gpio_register_set_direction(125, 1);
	gpio_register_set_value(125, 1);			//开关使能脚


	/* [3]初始化待测GPIO */
	test_MAX_pin_num = sizeof(test_pin_array)/sizeof(test_pin_array[0]);

	gpio_test_init_test_gpio_mode(test_pin_array,test_MAX_pin_num);



	/* [4]测试过程 */
	test_fail_count = mbtk_gpio_test_all_low(test_pin_array,test_MAX_pin_num);

	if(!test_fail_count) //set all pin low passed
	{
		printf("[GPIOTEST]set all pin low: passed\n");
		test_fail_count = mbtk_gpio_test_pin_high(&test_pin_array,test_MAX_pin_num);
	}
	else
	{
		printf("[GPIOTEST]set all pin low: failed num=%d!!!\n",test_fail_count);
	}
	

	//memset(buf,0,STR_MAX_LEN);

	/* [5]测试结果检测 */
	if(test_fail_count )
	{
		//printf( "GPIOTEST Fail %02d PINs:\n", test_fail_count*2);
		sprintf(buf, "GPIOTEST Fail %02d PINs:", test_fail_count*2);
		temp_len = strlen(buf);

		num = 0;
		for(i = 0; i< test_MAX_pin_num; i++)
		{

			if(test_pin_array[i].mbtk_gpio_test_result)
			{

				Out_pin = test_pin_array[i].output_pin;
				in_pin = test_pin_array[i].input_pin;
				fail_io[num++] = Out_pin;
				fail_io[num++] = in_pin;

			}
		}
	}

	else
	{
		printf(buf,"ALL GPIO TEST PASS\r\n");
	}
	system("echo 33 > /sys/class/gpio/unexport");
	system("echo 120 > /sys/class/gpio/unexport");
	system("echo 126 > /sys/class/gpio/unexport");
        printf("\n[GPIOTEST] Finished !!\n\n");
	return  test_fail_count * 2;
}

#elif defined(MBTK_PROJECT_L508_X6)
int gpio_register_test_out_0(int port, int value)
{
    int ret;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    printf("Gpio port [%d] test start!\n", port);
    ret = gpio_register_set_func_0(port);           //设功能为GPIO
    if(ret){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port, 1);           //设方向为输出
    ret = gpio_register_get_value(port);
    //printf("gpio default value is : %d.\n", ret);
    
    
    //[High]
    for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 1);
        usleep(50);
        valueh = gpio_register_get_value(port);
        //printf("set high? %d\n",valueh);
        if(1 == valueh){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(0);  
        usleep(3000);
        if(1 == ret){
            break;
        }
    }
	//printf("******gpio should is high: %d.******\n", ret);
    if(1 != ret){
        ret=-1;
        goto exit;
    }



    //[Low]
     usleep(200);
     for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 0);               //输出低
        usleep(50);
        valuel = gpio_register_get_value(port);
        //printf("set low? %d\n",valuel);
        if(0 == valuel){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(0);  
        usleep(3000);
        if(0 == ret){
            break;
        }
    }
    //printf("******gpio should is low: %d.******\n", ret);
    if(0 != ret){
        ret=-1;
        goto exit;
    }

exit:
	gpio_register_set_value(port, 0);
    gpio_register_set_direction(port, 0);  //设方向为输入
    return ret;
}

int gpio_register_test_out_1(int port, int value)
{
    int ret;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    printf("Gpio port [%d] test start!\n", port);
    ret = gpio_register_set_func_0(port);           //设功能为GPIO
    if(ret){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port, 1);           //设方向为输出
    ret = gpio_register_get_value(port);
    printf("gpio default value is : %d.\n", ret);
    
    
    //[High]
    for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 1);
        usleep(50);
        valueh = gpio_register_get_value(port);
        //printf("set high? %d\n",valueh);
        if(1 == valueh){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(1);  
        usleep(3000);
        if(1 == ret){
            break;
        }
    }
    if(1 != ret){
        ret=-1;
        goto exit;
    }
    //printf("******gpio should is high: %d.******\n", ret);


    //[Low]
     usleep(200);
     for(i = 0; i <= 10; i++){
        gpio_register_set_value(port, 0);               //输出低
        usleep(50);
        valuel = gpio_register_get_value(port);
        //printf("set low? %d\n",valuel);
        if(0 == valuel){
            break;
        }
    }
    //usleep(10000);
    for(i = 0; i <= 35; i++){
        ret = mbtk_gpio_adc(1);  
        usleep(3000);
        if(0 == ret){
            break;
        }
    }
    //printf("******gpio should is low: %d.******\n", ret);
    if(0 != ret){
        ret=-1;
        goto exit;
    }

exit:
    gpio_register_set_value(port, 0);
    gpio_register_set_direction(port, 0);  //设方向为输入
    return ret;
}


int gpio_register_test_out_2(int port_in, int port_out, int value)
{
    int ret_in;
	int ret_out;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    printf("Gpio port [%d] test start!\n", port_out);
    ret_in = gpio_register_set_func_0(port_in);           //设功能为GPIO
	ret_out = gpio_register_set_func_0(port_out);
    if((ret_in+ret_out)){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port_out, 1);           //设方向为输出
	gpio_register_set_direction(port_in, 0);           //设方向为输入
    ret_in = gpio_register_get_value(port_in);
    printf("gpio default value is : %d.\n", ret_in);
    
    
    //[High]
    for(i = 0; i <= 10; i++){
        gpio_register_set_value(port_out, 1);
        usleep(50);
        valueh = gpio_register_get_value(port_out);
        printf("set high? %d\n",valueh);
        if(1 == valueh){
            break;
        }
    }


    for(i = 0; i <= 35; i++){
       ret_in = gpio_register_get_value(port_in); 
        usleep(3000);
        if(1 == ret_in){
            break;
        }
    }
    if(1 != ret_in){
        ret_in=-1;
		printf("get high failed! \n");
        goto exit;
    }
    printf("******gpio should is high: %d.******\n", ret_in);


    //[Low]
     usleep(200);
     for(i = 0; i <= 10; i++){
        gpio_register_set_value(port_out, 0);               //输出低
        usleep(50);
        valuel = gpio_register_get_value(port_out);
        printf("set low? %d\n",valuel);
        if(0 == valuel){
            break;
        }
    }
	
    for(i = 0; i <= 35; i++){
        ret_in = gpio_register_get_value(port_in);  
        usleep(3000);
        if(0 == ret_in){
            break;
        }
    }
    printf("******gpio should is low: %d.******\n", ret_in);
    if(0 != ret_in){
        ret_in=-1;
		printf("get low failed! \n");
        goto exit;
    }

exit:
    gpio_register_set_value(port_out, 0);
    gpio_register_set_direction(port_out, 0);  //设方向为输入
    return ret_in;
}


void gpio_test_init_test_gpio_mode(void )
{

	   
    int test_gpio_1[] = {
		40, 33, 34, 39, 99, 
		56, 58, 55, 57, 48, 59, 123, 122, 20, 53,
		19, 49, 50, 32 ,31, 6, 11, 10,
	    88, 87, 86, 85, 84, 89, 
		90, 46, 127, 117, 119, 
	};
	
	int test_gpio_0[] = {
		7,  8, 27, 28, 26, 25, 15, 1, 3, 0, 
		37, 38,35, 36, 42, 41, 21, 22, 24, 23,
		54, 125, 18, 13, 14, 17, 16, 5, 4, 2, 12,
		44, 45, 47
	};
    int i, j, ret_0, ret_1, total_1, total_0, n = 0;
    total_0 = (sizeof(test_gpio_0)/sizeof(int));
    total_1 = (sizeof(test_gpio_1)/sizeof(int));
	
	//system("at at+gpsinit=0");
	system("i2cset -y -f 2 0x32 0x0d 0x00"); 
	system("i2cset -y -f 2 0x31 0x18 0x8f"); 
	usleep(10000);		
	
       //printf("[init]gpio_test_init_test_gpio_mode FINISH\n");
		/* [1 all gpio set to low] */
    for(j = 0; j < 6 ; j++){
        for(i = 0; i < total_1; i++){
            gpio_register_set_func_0(test_gpio_1[i]);
            gpio_register_set_direction(test_gpio_1[i], 1);
            gpio_register_set_value(test_gpio_1[i], 0);
        }
		for(i = 0; i < total_0; i++){
            gpio_register_set_func_0(test_gpio_0[i]);
            gpio_register_set_direction(test_gpio_0[i], 1);
            gpio_register_set_value(test_gpio_0[i], 0);
        }
      //usleep(10000);
	  
      for(i = 0; i <= 35; i++){
          ret_0 = mbtk_gpio_adc(0);
		  usleep(3000);
		  ret_1 = mbtk_gpio_adc(1);
          
          if(0 == (ret_0 + ret_1)){
              break;
          }
      }
      printf("pre set ADC: %d, times: %d\n",(ret_0 + ret_1), j);
      if(0 == (ret_0 + ret_1)){
          break;
      }
    }
	if(0 != (ret_0 + ret_1)){
		
		printf("Fail, please retest");
		return -1;
	}
	gpio_register_set_value(119, 1);
	gpio_register_set_value(117, 1);

}

int mbtk_at_gpio(void* arg)
{

    printf("Start test gpio V1.0\n");
    int test_gpio_1[] = {
		40, 33, 34, 39, 99, 
		56, 58, 55, 57, 48, 59, 20, 53,
		19, 49, 50, 32 ,31, 6, 11, 10,7,
		90, 46, 127,	
		88, 87, 86, 85, 84, 89,   
	};
	
	int test_gpio_0[] = {
		35, 36, 42, 41, 21, 22, 24, 23,
		54, 125, 18, 13, 14, 17, 16, 5, 4, 2, 12,0,
		27, 28, 26, 25, 15, 1, 3,  
		37, 38,8
	};
	int test_gpio_2[] = {		//GPS组
		43,47,
		//45,44
	};

    int i, j, ret_0, ret_1, ret_2, total_1, total_0, total_2, n = 0;
    int *fail_io = (int *)arg;
    total_0 = (sizeof(test_gpio_0)/sizeof(int));
    total_1 = (sizeof(test_gpio_1)/sizeof(int));
	total_2 = (sizeof(test_gpio_2)/sizeof(int));

    /* [1 all gpio Init] */
    gpio_test_init_test_gpio_mode();


    /* [2 GPIOTEST] */
	//Test 0
	for(i = 0; i < total_0; i++){
        ret_0 = gpio_register_test_out_0(test_gpio_0[i], 0);
        if(-1 == ret_0){
            printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio_0[i]);
            fail_io[n] = test_gpio_0[i];
            n++;
        }else{
            //printf("############gpio [%d] test success############\n", test_gpio_0[i]);
        }
    }
	
	//Test 1	
    for(i = 0; i < total_1; i++){
        ret_1 = gpio_register_test_out_1(test_gpio_1[i], 0);
        if(-1 == ret_1){
            printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio_1[i]);
            fail_io[n] = test_gpio_1[i];
            n++;
        }else{
            //printf("############gpio [%d] test success############\n", test_gpio_1[i]);
        }
    }

	//Test 2	
    for(i = 0; i < total_2; i=i+2){
        ret_2 = gpio_register_test_out_2(test_gpio_2[i], test_gpio_2[i+1], 0);
        if(-1 == ret_2){
            //printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio_2[i+1]);
            fail_io[n] = test_gpio_2[i];
            n++;
        }else{
            printf("############gpio [%d] test success############\n", test_gpio_2[i+1]);
        }
    }

    mbtk_adc_close();
    return n;
}

#elif 0//(MBTK_PROJECT_T108)
int gpio_register_test_out(int port, int value)
{
    int ret;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    //printf("Gpio port [%d] test start!\n", port);
    ret = gpio_register_set_func_0(port);           //设功能为GPIO
    if(ret){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port, 1);           //设方向为输出
    //ret = gpio_register_get_value(port);
    //printf("gpio default value is: %d\n", ret);
    
    
    //[High]
    for(i = 0; i <= 9; i++){
        gpio_register_set_value(port, 1);
        usleep(50);
        //valueh = gpio_register_get_value(port);
        //printf("set high? %d\n", valueh);
        if(1 == valueh){
            break;
        }
    }

    for(i = 0; i <= 35; i++){
        ret = gpio_register_get_value(118);  
        if(1 == ret){
            break;
        }
		usleep(3000);
    }
	printf("******gpio should is high: %d.******\n", ret);
    if(1 != ret){
        ret=-1;
        goto exit;
    }

    //[Low]
	usleep(200);
	for(i = 0; i <= 9; i++){
		gpio_register_set_value(port, 0);               //输出低
		usleep(50);
		//valuel = gpio_register_get_value(port);
		//printf("set low? %d\n", valuel);
		if(0 == valuel){
			break;
		}
	}

    for(i = 0; i <= 35; i++){
        ret = gpio_register_get_value(118);  
        if(0 == ret){
            break;
        }
        usleep(3000);
    }
    //printf("******gpio should is low: %d.******\n", ret);
    if(0 != ret){
        ret=-1;
        goto exit;
    }

exit:
	gpio_register_set_value(port, 0);
    gpio_register_set_direction(port, 0);  //设方向为输入
    return ret;
}

int gpio_test_init_test_gpio_mode(void)
{
    const int test_gpio[] = {
		99,
		117,
		21,22,23,24,44,41,120,
		8,127,46,59,58,57,56,55,48,19,34,33,35,36,49,
		50,25,28,26,122,20,10,11,
		39,40,37,38,
		51,52,31,32,
	};
	
    int i, j, ret, total, n = 0;
    total = (sizeof(test_gpio)/sizeof(int));
    printf("[init]gpio_test_init_test_gpio_mode BEGIN\n");
	
	/* [1 all gpio set to low] */
	gpio_register_set_func_0(118);
	gpio_register_set_direction(118, 0);
	system("echo in  > /sys/class/gpio/gpio118/direction");
	
    for(j = 0; j < 6 ; j++){
        for(i = 0; i < total; i++){
            gpio_register_set_func_0(test_gpio[i]);
            gpio_register_set_direction(test_gpio[i], 1);
            gpio_register_set_value(test_gpio[i], 0);
			//ret = gpio_register_get_value(test_gpio[i]);
			//printf("[init]get gpio%d=%d\n", test_gpio[i], ret);
        }

		for(i = 0; i <= 35; i++){
		  ret = gpio_register_get_value(118);
		  printf("[init]get gpi118=%d\n", ret);
		  usleep(3000);          
		  if(0 == (ret)){
			  break;
		  }
		}
		
		printf("pre set ADC: %d, times: %d\n",(ret), j);
		if(0 == (ret)){
		  break;
		}
    }
	if(0 != (ret)){
		printf("!!!Set all low FAIL, please retest\n");
		return -1;
	}
	return 0;
}

int mbtk_at_gpio(void* arg)
{

    const int test_gpio[] = {
	  //GPIO	PIN		GPIO	PIN		GPIO	PIN		GPIO	PIN
		99,		170,	117,	59,		21,		61,		22,		62,
		23,		144,	24,		147,	44,		5,		41,		159,
		120,	143,	8,		171,	127,	160,	46,		149,
		59,		19,		58,		18,		57,		20,		56,		21,
		55,		22,		48,		23,		19,		3,		34,		79,
		33,		80,		35,		78,		36,		77,		49,		43,
		50,		42,		25,		67,		28,		66,		26,		65,
		122,	169,	20,		152,	10,		74,		11,		73,
		39,		166,	40,		164,	37,		165,	38,		163,
		51,		58,		52,		60,		31,		57,		32,		56,
	};

    int i, n = 0, ret, total;
    int *fail_io = (int *)arg;
	int try_count = 0;
    total = (sizeof(test_gpio)/sizeof(int));
	printf("T108 Start test gpio V1.0, total gpio=%d\n", (total/2));
	
	for(try_count; try_count < 4; try_count++){
	    n = 0;
	    /* [1 all gpio Init] */
	    gpio_test_init_test_gpio_mode();

	    /* [2 GPIOTEST] */
		for(i = 0; i < total; i = i + 2){
	        ret = gpio_register_test_out(test_gpio[i], 0);
	        if(-1 == ret){
				n++;
	            printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio[i]);
				if(try_count != 3){
					printf(" ---TEST FAILED! RETRY!--- \n");
        			usleep(5000);
					break;
				}
	            fail_io[n - 1] = test_gpio[i+1];
	        }else{
	            //printf("############gpio [%d] test success############\n", test_gpio[i]);
	        }
	    }
	    if(0 == n){
	    	break;
		}
    }
    return n;
}


#elif (MBTK_PROJECT_T108)
static int gpio_test(int port)
{
    int ret;
    int i;
    int valueh = 0;
    int valuel = 1;
    
    //printf("Gpio port [%d] test start!\n", port);
    ret = gpio_register_set_func_0(port);           
    if(ret){
        printf("gpio_port can't support!\n");
        return -1;
    }
    gpio_register_set_direction(port, 1);           
    //ret = gpio_register_get_value(port);
    //printf("gpio default value is: %d\n", ret);
    
    
    //[High]
    for(i = 0; i <= 5; i++){
        gpio_register_set_value(port, 1);
        usleep(50);
        //valueh = gpio_register_get_value(port);
        //printf("set high? %d\n", valueh);
        if(1 == valueh){
            break;
        }
    }

    for(i = 0; i <= 5; i++){
        ret = gpio_register_get_value(118);  
        if(1 == ret){

            break;
        }
		usleep(3000);
    }
    //printf("count=%d \n", i);
  	//printf("******gpio should is high: %d.******\n", ret);
    if(1 != ret){
        ret=-1;
        goto exit;
    }

    //[Low]
	usleep(200);
	for(i = 0; i <= 9; i++){
		gpio_register_set_value(port, 0);              
		usleep(50);
		//valuel = gpio_register_get_value(port);
		//printf("set low? %d\n", valuel);
		if(0 == valuel){
			break;
		}
	}

    for(i = 0; i <= 5; i++){
        ret = gpio_register_get_value(118);  
        if(0 == ret){
        
            break;
        }
        usleep(3000);
    }
    //printf("count=%d \n", i);
    //printf("******gpio should is low: %d.******\n", ret);
    if(0 != ret){
        ret=-1;
        goto exit;
    }

exit:
    gpio_register_set_value(port, 0);
    gpio_register_set_direction(port, 0);  
    return ret;
    
}

static int gpio_test_init_test_gpio_mode(void)
{
	const int test_gpio[] = {
      99,8,117,21,22,23,24,41,120,19,123,
      58,59,57,56,55,48,125,127,36,35,34,
      33,54,47,53,46,50,49,11,10,26,28,25,
      27,32,31,51,52,39,40,37,38,
      44,45
	};
	
    int i, j, ret, total, n = 0;
    total = (sizeof(test_gpio)/sizeof(int));
    //printf("[init]gpio_test_init_test_gpio_mode BEGIN\n");
	
	/* [1 all gpio set to low] */
	gpio_register_set_func_0(118);
	gpio_register_set_direction(118, 0);
	
    for(j = 0; j < 5 ; j++){
        for(i = 0; i < total; i++){
            gpio_register_set_func_0(test_gpio[i]);
            gpio_register_set_direction(test_gpio[i], 1);
            gpio_register_set_value(test_gpio[i], 0);
			//ret = gpio_register_get_value(test_gpio[i]);
			//printf("[init]get gpio%d=%d\n", test_gpio[i], ret);
        }


		for(i = 0; i <= 10; i++){
		  ret = gpio_register_get_value(118);
		  //printf("[init]get gpi118=%d\n", ret);
		  usleep(3000);          
		  if(0 == (ret)){
			  break;
		  }
		}
		
		//printf("pre set 118: %d, times: %d\n",(ret), j);
		if(0 == (ret)){
		  break;
		}
    }
	if(0 != (ret)){
		printf("!!!Set all low FAIL, please retest\n");
		return -1;
	}
	return 0;
}

int mbtk_at_gpio(void* arg)
{
    const int test_gpio[] = { 
	//GPIO	PIN		GPIO	PIN		GPIO	PIN		GPIO	PIN
	99,		170,	8,		171,	117,	59,		21,		61,
	22,		62,		23,		144,	24,		147,	41,		159,
	120,	143,	19,		3,		123,	5,		58,		18,
	59,		19,		57,		20,		56,		21,		55,		22,
	48,		23,		125,	149,	127,	160,	36,		77,
	35,		78,		34,		79,		33,		80,		54,		163,
	#if 0	//Hard Ware ERROR!
	47,		164,
	46,		166,
	#endif 
	53,		165,	50,		42,		49,		43,		11,		73,
	10,		74,		26,		65,		28,		66,		25,		67,
	27,		68,		32,		56,		31,		57,		51,		58,
	52,		60,		39,		192,	40,		193,	37,		194,
	38,		195,
	#if 0	//undefine GNSS
	44,		161,
	45,		151,
	#endif
	};

    int i, n = 0, ret, total;
    int *fail_io = (int *)arg;
    int try_count;
    total = (sizeof(test_gpio)/sizeof(int));
	printf("T108 V2 Start test gpio V0.8, total gpio=%d\n", (total/2));
	
    for(try_count = 0; try_count < 4; try_count++){
        n = 0;
        /* [1 all gpio Init] */
        gpio_test_init_test_gpio_mode();
        
        /* [2 GPIOTEST] */
    	for(i = 0; i < total; i = i + 2){
            ret = gpio_test(test_gpio[i]);
            if(-1 == ret){
				n++;
				printf("!!!!!!!!!!!!gpio [%d] test failed!!!!!!!!!!!!\n", test_gpio[i]);
				if(try_count != 3){
					printf(" ---TEST FAILED! RETRY!--- \n");
        			usleep(5000);
					break;
				}
                fail_io[n - 1] = test_gpio[i + 1];
            }else{
                //printf("############gpio [%d] test success############\n", test_gpio[i]);
            }
        }
        if(0 == n){
			printf(" ---ALL PASS---\n");
            break;
        }
    }
    return n;
}


#else
int mbtk_at_gpio(void* arg)
{
    return -1;
}

#endif