| /* | 
 |  *  linux/arch/arm/mach-omap1/clock.h | 
 |  * | 
 |  *  Copyright (C) 2004 - 2005, 2009 Nokia corporation | 
 |  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> | 
 |  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H | 
 | #define __ARCH_ARM_MACH_OMAP1_CLOCK_H | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/list.h> | 
 |  | 
 | #include <linux/clkdev.h> | 
 |  | 
 | struct module; | 
 | struct clk; | 
 |  | 
 | struct omap_clk { | 
 | 	u16				cpu; | 
 | 	struct clk_lookup		lk; | 
 | }; | 
 |  | 
 | #define CLK(dev, con, ck, cp)		\ | 
 | 	{				\ | 
 | 		 .cpu = cp,		\ | 
 | 		.lk = {			\ | 
 | 			.dev_id = dev,	\ | 
 | 			.con_id = con,	\ | 
 | 			.clk = ck,	\ | 
 | 		},			\ | 
 | 	} | 
 |  | 
 | /* Platform flags for the clkdev-OMAP integration code */ | 
 | #define CK_310		(1 << 0) | 
 | #define CK_7XX		(1 << 1)	/* 7xx, 850 */ | 
 | #define CK_1510		(1 << 2) | 
 | #define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */ | 
 | #define CK_1710		(1 << 4)	/* 1710 extra for rate selection */ | 
 |  | 
 |  | 
 | /* Temporary, needed during the common clock framework conversion */ | 
 | #define __clk_get_name(clk)	(clk->name) | 
 | #define __clk_get_parent(clk)	(clk->parent) | 
 | #define __clk_get_rate(clk)	(clk->rate) | 
 |  | 
 | /** | 
 |  * struct clkops - some clock function pointers | 
 |  * @enable: fn ptr that enables the current clock in hardware | 
 |  * @disable: fn ptr that enables the current clock in hardware | 
 |  * @find_idlest: function returning the IDLEST register for the clock's IP blk | 
 |  * @find_companion: function returning the "companion" clk reg for the clock | 
 |  * @allow_idle: fn ptr that enables autoidle for the current clock in hardware | 
 |  * @deny_idle: fn ptr that disables autoidle for the current clock in hardware | 
 |  * | 
 |  * A "companion" clk is an accompanying clock to the one being queried | 
 |  * that must be enabled for the IP module connected to the clock to | 
 |  * become accessible by the hardware.  Neither @find_idlest nor | 
 |  * @find_companion should be needed; that information is IP | 
 |  * block-specific; the hwmod code has been created to handle this, but | 
 |  * until hwmod data is ready and drivers have been converted to use PM | 
 |  * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and | 
 |  * @find_companion must, unfortunately, remain. | 
 |  */ | 
 | struct clkops { | 
 | 	int			(*enable)(struct clk *); | 
 | 	void			(*disable)(struct clk *); | 
 | 	void			(*find_idlest)(struct clk *, void __iomem **, | 
 | 					       u8 *, u8 *); | 
 | 	void			(*find_companion)(struct clk *, void __iomem **, | 
 | 						  u8 *); | 
 | 	void			(*allow_idle)(struct clk *); | 
 | 	void			(*deny_idle)(struct clk *); | 
 | }; | 
 |  | 
 | /* | 
 |  * struct clk.flags possibilities | 
 |  * | 
 |  * XXX document the rest of the clock flags here | 
 |  * | 
 |  * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL | 
 |  *     bits share the same register.  This flag allows the | 
 |  *     omap4_dpllmx*() code to determine which GATE_CTRL bit field | 
 |  *     should be used.  This is a temporary solution - a better approach | 
 |  *     would be to associate clock type-specific data with the clock, | 
 |  *     similar to the struct dpll_data approach. | 
 |  */ | 
 | #define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */ | 
 | #define CLOCK_IDLE_CONTROL	(1 << 1) | 
 | #define CLOCK_NO_IDLE_PARENT	(1 << 2) | 
 | #define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */ | 
 | #define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */ | 
 | #define CLOCK_CLKOUTX2		(1 << 5) | 
 |  | 
 | /** | 
 |  * struct clk - OMAP struct clk | 
 |  * @node: list_head connecting this clock into the full clock list | 
 |  * @ops: struct clkops * for this clock | 
 |  * @name: the name of the clock in the hardware (used in hwmod data and debug) | 
 |  * @parent: pointer to this clock's parent struct clk | 
 |  * @children: list_head connecting to the child clks' @sibling list_heads | 
 |  * @sibling: list_head connecting this clk to its parent clk's @children | 
 |  * @rate: current clock rate | 
 |  * @enable_reg: register to write to enable the clock (see @enable_bit) | 
 |  * @recalc: fn ptr that returns the clock's current rate | 
 |  * @set_rate: fn ptr that can change the clock's current rate | 
 |  * @round_rate: fn ptr that can round the clock's current rate | 
 |  * @init: fn ptr to do clock-specific initialization | 
 |  * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) | 
 |  * @usecount: number of users that have requested this clock to be enabled | 
 |  * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div | 
 |  * @flags: see "struct clk.flags possibilities" above | 
 |  * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) | 
 |  * @src_offset: bitshift for source selection bitfield (OMAP1 only) | 
 |  * | 
 |  * XXX @rate_offset, @src_offset should probably be removed and OMAP1 | 
 |  * clock code converted to use clksel. | 
 |  * | 
 |  * XXX @usecount is poorly named.  It should be "enable_count" or | 
 |  * something similar.  "users" in the description refers to kernel | 
 |  * code (core code or drivers) that have called clk_enable() and not | 
 |  * yet called clk_disable(); the usecount of parent clocks is also | 
 |  * incremented by the clock code when clk_enable() is called on child | 
 |  * clocks and decremented by the clock code when clk_disable() is | 
 |  * called on child clocks. | 
 |  * | 
 |  * XXX @clkdm, @usecount, @children, @sibling should be marked for | 
 |  * internal use only. | 
 |  * | 
 |  * @children and @sibling are used to optimize parent-to-child clock | 
 |  * tree traversals.  (child-to-parent traversals use @parent.) | 
 |  * | 
 |  * XXX The notion of the clock's current rate probably needs to be | 
 |  * separated from the clock's target rate. | 
 |  */ | 
 | struct clk { | 
 | 	struct list_head	node; | 
 | 	const struct clkops	*ops; | 
 | 	const char		*name; | 
 | 	struct clk		*parent; | 
 | 	struct list_head	children; | 
 | 	struct list_head	sibling;	/* node for children */ | 
 | 	unsigned long		rate; | 
 | 	void __iomem		*enable_reg; | 
 | 	unsigned long		(*recalc)(struct clk *); | 
 | 	int			(*set_rate)(struct clk *, unsigned long); | 
 | 	long			(*round_rate)(struct clk *, unsigned long); | 
 | 	void			(*init)(struct clk *); | 
 | 	u8			enable_bit; | 
 | 	s8			usecount; | 
 | 	u8			fixed_div; | 
 | 	u8			flags; | 
 | 	u8			rate_offset; | 
 | 	u8			src_offset; | 
 | #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) | 
 | 	struct dentry		*dent;	/* For visible tree hierarchy */ | 
 | #endif | 
 | }; | 
 |  | 
 | struct clk_functions { | 
 | 	int		(*clk_enable)(struct clk *clk); | 
 | 	void		(*clk_disable)(struct clk *clk); | 
 | 	long		(*clk_round_rate)(struct clk *clk, unsigned long rate); | 
 | 	int		(*clk_set_rate)(struct clk *clk, unsigned long rate); | 
 | 	int		(*clk_set_parent)(struct clk *clk, struct clk *parent); | 
 | 	void		(*clk_allow_idle)(struct clk *clk); | 
 | 	void		(*clk_deny_idle)(struct clk *clk); | 
 | 	void		(*clk_disable_unused)(struct clk *clk); | 
 | }; | 
 |  | 
 | extern int clk_init(struct clk_functions *custom_clocks); | 
 | extern void clk_preinit(struct clk *clk); | 
 | extern int clk_register(struct clk *clk); | 
 | extern void clk_reparent(struct clk *child, struct clk *parent); | 
 | extern void clk_unregister(struct clk *clk); | 
 | extern void propagate_rate(struct clk *clk); | 
 | extern void recalculate_root_clocks(void); | 
 | extern unsigned long followparent_recalc(struct clk *clk); | 
 | extern void clk_enable_init_clocks(void); | 
 | unsigned long omap_fixed_divisor_recalc(struct clk *clk); | 
 | extern struct clk *omap_clk_get_by_name(const char *name); | 
 | extern int omap_clk_enable_autoidle_all(void); | 
 | extern int omap_clk_disable_autoidle_all(void); | 
 |  | 
 | extern const struct clkops clkops_null; | 
 |  | 
 | extern struct clk dummy_ck; | 
 |  | 
 | int omap1_clk_init(void); | 
 | void omap1_clk_late_init(void); | 
 | extern int omap1_clk_enable(struct clk *clk); | 
 | extern void omap1_clk_disable(struct clk *clk); | 
 | extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); | 
 | extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); | 
 | extern unsigned long omap1_ckctl_recalc(struct clk *clk); | 
 | extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); | 
 | extern unsigned long omap1_sossi_recalc(struct clk *clk); | 
 | extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); | 
 | extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); | 
 | extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); | 
 | extern unsigned long omap1_uart_recalc(struct clk *clk); | 
 | extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); | 
 | extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); | 
 | extern void omap1_init_ext_clk(struct clk *clk); | 
 | extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); | 
 | extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); | 
 | extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); | 
 | extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); | 
 | extern unsigned long omap1_watchdog_recalc(struct clk *clk); | 
 |  | 
 | #ifdef CONFIG_OMAP_RESET_CLOCKS | 
 | extern void omap1_clk_disable_unused(struct clk *clk); | 
 | #else | 
 | #define omap1_clk_disable_unused	NULL | 
 | #endif | 
 |  | 
 | struct uart_clk { | 
 | 	struct clk	clk; | 
 | 	unsigned long	sysc_addr; | 
 | }; | 
 |  | 
 | /* Provide a method for preventing idling some ARM IDLECT clocks */ | 
 | struct arm_idlect1_clk { | 
 | 	struct clk	clk; | 
 | 	unsigned long	no_idle_count; | 
 | 	__u8		idlect_shift; | 
 | }; | 
 |  | 
 | /* ARM_CKCTL bit shifts */ | 
 | #define CKCTL_PERDIV_OFFSET	0 | 
 | #define CKCTL_LCDDIV_OFFSET	2 | 
 | #define CKCTL_ARMDIV_OFFSET	4 | 
 | #define CKCTL_DSPDIV_OFFSET	6 | 
 | #define CKCTL_TCDIV_OFFSET	8 | 
 | #define CKCTL_DSPMMUDIV_OFFSET	10 | 
 | /*#define ARM_TIMXO		12*/ | 
 | #define EN_DSPCK		13 | 
 | /*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */ | 
 | /* DSP_CKCTL bit shifts */ | 
 | #define CKCTL_DSPPERDIV_OFFSET	0 | 
 |  | 
 | /* ARM_IDLECT2 bit shifts */ | 
 | #define EN_WDTCK	0 | 
 | #define EN_XORPCK	1 | 
 | #define EN_PERCK	2 | 
 | #define EN_LCDCK	3 | 
 | #define EN_LBCK		4 /* Not on 1610/1710 */ | 
 | /*#define EN_HSABCK	5*/ | 
 | #define EN_APICK	6 | 
 | #define EN_TIMCK	7 | 
 | #define DMACK_REQ	8 | 
 | #define EN_GPIOCK	9 /* Not on 1610/1710 */ | 
 | /*#define EN_LBFREECK	10*/ | 
 | #define EN_CKOUT_ARM	11 | 
 |  | 
 | /* ARM_IDLECT3 bit shifts */ | 
 | #define EN_OCPI_CK	0 | 
 | #define EN_TC1_CK	2 | 
 | #define EN_TC2_CK	4 | 
 |  | 
 | /* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ | 
 | #define EN_DSPTIMCK	5 | 
 |  | 
 | /* Various register defines for clock controls scattered around OMAP chip */ | 
 | #define SDW_MCLK_INV_BIT	2	/* In ULPD_CLKC_CTRL */ | 
 | #define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */ | 
 | #define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */ | 
 | #define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */ | 
 | #define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */ | 
 | #define SWD_CLK_DIV_CTRL_SEL	0xfffe0874 | 
 | #define COM_CLK_DIV_CTRL_SEL	0xfffe0878 | 
 | #define SOFT_REQ_REG		0xfffe0834 | 
 | #define SOFT_REQ_REG2		0xfffe0880 | 
 |  | 
 | extern __u32 arm_idlect1_mask; | 
 | extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; | 
 |  | 
 | extern const struct clkops clkops_dspck; | 
 | extern const struct clkops clkops_dummy; | 
 | extern const struct clkops clkops_uart_16xx; | 
 | extern const struct clkops clkops_generic; | 
 |  | 
 | /* used for passing SoC type to omap1_{select,round_to}_table_rate() */ | 
 | extern u32 cpu_mask; | 
 |  | 
 | #endif |