| /* | 
 |  *  Copyright (C) 2002,2003 Intrinsyc Software | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 |  * | 
 |  * History: | 
 |  *   31-Jul-2002 : Initial version [FB] | 
 |  *   29-Jan-2003 : added PXA255 support [FB] | 
 |  *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) | 
 |  * | 
 |  * Note: | 
 |  *   This driver may change the memory bus clock rate, but will not do any | 
 |  *   platform specific access timing changes... for example if you have flash | 
 |  *   memory connected to CS0, you will need to register a platform specific | 
 |  *   notifier which will adjust the memory access strobes to maintain a | 
 |  *   minimum strobe width. | 
 |  * | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/init.h> | 
 | #include <linux/cpufreq.h> | 
 | #include <linux/err.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/io.h> | 
 |  | 
 | #include <mach/pxa2xx-regs.h> | 
 | #include <mach/smemc.h> | 
 |  | 
 | #ifdef DEBUG | 
 | static unsigned int freq_debug; | 
 | module_param(freq_debug, uint, 0); | 
 | MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); | 
 | #else | 
 | #define freq_debug  0 | 
 | #endif | 
 |  | 
 | static struct regulator *vcc_core; | 
 |  | 
 | static unsigned int pxa27x_maxfreq; | 
 | module_param(pxa27x_maxfreq, uint, 0); | 
 | MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" | 
 | 		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); | 
 |  | 
 | struct pxa_cpufreq_data { | 
 | 	struct clk *clk_core; | 
 | }; | 
 | static struct pxa_cpufreq_data  pxa_cpufreq_data; | 
 |  | 
 | struct pxa_freqs { | 
 | 	unsigned int khz; | 
 | 	int vmin; | 
 | 	int vmax; | 
 | }; | 
 |  | 
 | /* | 
 |  * PXA255 definitions | 
 |  */ | 
 | static const struct pxa_freqs pxa255_run_freqs[] = | 
 | { | 
 | 	/* CPU   MEMBUS		   run  turbo PXbus SDRAM */ | 
 | 	{ 99500, -1, -1},	/*  99,   99,   50,   50  */ | 
 | 	{132700, -1, -1},	/* 133,  133,   66,   66  */ | 
 | 	{199100, -1, -1},	/* 199,  199,   99,   99  */ | 
 | 	{265400, -1, -1},	/* 265,  265,  133,   66  */ | 
 | 	{331800, -1, -1},	/* 331,  331,  166,   83  */ | 
 | 	{398100, -1, -1},	/* 398,  398,  196,   99  */ | 
 | }; | 
 |  | 
 | /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ | 
 | static const struct pxa_freqs pxa255_turbo_freqs[] = | 
 | { | 
 | 	/* CPU			   run  turbo PXbus SDRAM */ | 
 | 	{ 99500, -1, -1},	/*  99,   99,   50,   50  */ | 
 | 	{199100, -1, -1},	/*  99,  199,   50,   99  */ | 
 | 	{298500, -1, -1},	/*  99,  287,   50,   99  */ | 
 | 	{298600, -1, -1},	/* 199,  287,   99,   99  */ | 
 | 	{398100, -1, -1},	/* 199,  398,   99,   99  */ | 
 | }; | 
 |  | 
 | #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) | 
 | #define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) | 
 |  | 
 | static struct cpufreq_frequency_table | 
 | 	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; | 
 | static struct cpufreq_frequency_table | 
 | 	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; | 
 |  | 
 | static unsigned int pxa255_turbo_table; | 
 | module_param(pxa255_turbo_table, uint, 0); | 
 | MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); | 
 |  | 
 | static struct pxa_freqs pxa27x_freqs[] = { | 
 | 	{104000,  900000, 1705000 }, | 
 | 	{156000, 1000000, 1705000 }, | 
 | 	{208000, 1180000, 1705000 }, | 
 | 	{312000, 1250000, 1705000 }, | 
 | 	{416000, 1350000, 1705000 }, | 
 | 	{520000, 1450000, 1705000 }, | 
 | 	{624000, 1550000, 1705000 } | 
 | }; | 
 |  | 
 | #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) | 
 | static struct cpufreq_frequency_table | 
 | 	pxa27x_freq_table[NUM_PXA27x_FREQS+1]; | 
 |  | 
 | extern unsigned get_clk_frequency_khz(int info); | 
 |  | 
 | #ifdef CONFIG_REGULATOR | 
 |  | 
 | static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) | 
 | { | 
 | 	int ret = 0; | 
 | 	int vmin, vmax; | 
 |  | 
 | 	if (!cpu_is_pxa27x()) | 
 | 		return 0; | 
 |  | 
 | 	vmin = pxa_freq->vmin; | 
 | 	vmax = pxa_freq->vmax; | 
 | 	if ((vmin == -1) || (vmax == -1)) | 
 | 		return 0; | 
 |  | 
 | 	ret = regulator_set_voltage(vcc_core, vmin, vmax); | 
 | 	if (ret) | 
 | 		pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void pxa_cpufreq_init_voltages(void) | 
 | { | 
 | 	vcc_core = regulator_get(NULL, "vcc_core"); | 
 | 	if (IS_ERR(vcc_core)) { | 
 | 		pr_info("Didn't find vcc_core regulator\n"); | 
 | 		vcc_core = NULL; | 
 | 	} else { | 
 | 		pr_info("Found vcc_core regulator\n"); | 
 | 	} | 
 | } | 
 | #else | 
 | static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pxa_cpufreq_init_voltages(void) { } | 
 | #endif | 
 |  | 
 | static void find_freq_tables(struct cpufreq_frequency_table **freq_table, | 
 | 			     const struct pxa_freqs **pxa_freqs) | 
 | { | 
 | 	if (cpu_is_pxa25x()) { | 
 | 		if (!pxa255_turbo_table) { | 
 | 			*pxa_freqs = pxa255_run_freqs; | 
 | 			*freq_table = pxa255_run_freq_table; | 
 | 		} else { | 
 | 			*pxa_freqs = pxa255_turbo_freqs; | 
 | 			*freq_table = pxa255_turbo_freq_table; | 
 | 		} | 
 | 	} else if (cpu_is_pxa27x()) { | 
 | 		*pxa_freqs = pxa27x_freqs; | 
 | 		*freq_table = pxa27x_freq_table; | 
 | 	} else { | 
 | 		BUG(); | 
 | 	} | 
 | } | 
 |  | 
 | static void pxa27x_guess_max_freq(void) | 
 | { | 
 | 	if (!pxa27x_maxfreq) { | 
 | 		pxa27x_maxfreq = 416000; | 
 | 		pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", | 
 | 			pxa27x_maxfreq); | 
 | 	} else { | 
 | 		pxa27x_maxfreq *= 1000; | 
 | 	} | 
 | } | 
 |  | 
 | static unsigned int pxa_cpufreq_get(unsigned int cpu) | 
 | { | 
 | 	struct pxa_cpufreq_data *data = cpufreq_get_driver_data(); | 
 |  | 
 | 	return (unsigned int) clk_get_rate(data->clk_core) / 1000; | 
 | } | 
 |  | 
 | static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx) | 
 | { | 
 | 	struct cpufreq_frequency_table *pxa_freqs_table; | 
 | 	const struct pxa_freqs *pxa_freq_settings; | 
 | 	struct pxa_cpufreq_data *data = cpufreq_get_driver_data(); | 
 | 	unsigned int new_freq_cpu; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* Get the current policy */ | 
 | 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); | 
 |  | 
 | 	new_freq_cpu = pxa_freq_settings[idx].khz; | 
 |  | 
 | 	if (freq_debug) | 
 | 		pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n", | 
 | 			 policy->cur / 1000,  new_freq_cpu / 1000); | 
 |  | 
 | 	if (vcc_core && new_freq_cpu > policy->cur) { | 
 | 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	clk_set_rate(data->clk_core, new_freq_cpu * 1000); | 
 |  | 
 | 	/* | 
 | 	 * Even if voltage setting fails, we don't report it, as the frequency | 
 | 	 * change succeeded. The voltage reduction is not a critical failure, | 
 | 	 * only power savings will suffer from this. | 
 | 	 * | 
 | 	 * Note: if the voltage change fails, and a return value is returned, a | 
 | 	 * bug is triggered (seems a deadlock). Should anybody find out where, | 
 | 	 * the "return 0" should become a "return ret". | 
 | 	 */ | 
 | 	if (vcc_core && new_freq_cpu < policy->cur) | 
 | 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pxa_cpufreq_init(struct cpufreq_policy *policy) | 
 | { | 
 | 	int i; | 
 | 	unsigned int freq; | 
 | 	struct cpufreq_frequency_table *pxa255_freq_table; | 
 | 	const struct pxa_freqs *pxa255_freqs; | 
 |  | 
 | 	/* try to guess pxa27x cpu */ | 
 | 	if (cpu_is_pxa27x()) | 
 | 		pxa27x_guess_max_freq(); | 
 |  | 
 | 	pxa_cpufreq_init_voltages(); | 
 |  | 
 | 	/* set default policy and cpuinfo */ | 
 | 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ | 
 |  | 
 | 	/* Generate pxa25x the run cpufreq_frequency_table struct */ | 
 | 	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { | 
 | 		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; | 
 | 		pxa255_run_freq_table[i].driver_data = i; | 
 | 	} | 
 | 	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; | 
 |  | 
 | 	/* Generate pxa25x the turbo cpufreq_frequency_table struct */ | 
 | 	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { | 
 | 		pxa255_turbo_freq_table[i].frequency = | 
 | 			pxa255_turbo_freqs[i].khz; | 
 | 		pxa255_turbo_freq_table[i].driver_data = i; | 
 | 	} | 
 | 	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; | 
 |  | 
 | 	pxa255_turbo_table = !!pxa255_turbo_table; | 
 |  | 
 | 	/* Generate the pxa27x cpufreq_frequency_table struct */ | 
 | 	for (i = 0; i < NUM_PXA27x_FREQS; i++) { | 
 | 		freq = pxa27x_freqs[i].khz; | 
 | 		if (freq > pxa27x_maxfreq) | 
 | 			break; | 
 | 		pxa27x_freq_table[i].frequency = freq; | 
 | 		pxa27x_freq_table[i].driver_data = i; | 
 | 	} | 
 | 	pxa27x_freq_table[i].driver_data = i; | 
 | 	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; | 
 |  | 
 | 	/* | 
 | 	 * Set the policy's minimum and maximum frequencies from the tables | 
 | 	 * just constructed.  This sets cpuinfo.mxx_freq, min and max. | 
 | 	 */ | 
 | 	if (cpu_is_pxa25x()) { | 
 | 		find_freq_tables(&pxa255_freq_table, &pxa255_freqs); | 
 | 		pr_info("using %s frequency table\n", | 
 | 			pxa255_turbo_table ? "turbo" : "run"); | 
 |  | 
 | 		policy->freq_table = pxa255_freq_table; | 
 | 	} | 
 | 	else if (cpu_is_pxa27x()) { | 
 | 		policy->freq_table = pxa27x_freq_table; | 
 | 	} | 
 |  | 
 | 	pr_info("frequency change support initialized\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct cpufreq_driver pxa_cpufreq_driver = { | 
 | 	.flags	= CPUFREQ_NEED_INITIAL_FREQ_CHECK, | 
 | 	.verify	= cpufreq_generic_frequency_table_verify, | 
 | 	.target_index = pxa_set_target, | 
 | 	.init	= pxa_cpufreq_init, | 
 | 	.get	= pxa_cpufreq_get, | 
 | 	.name	= "PXA2xx", | 
 | 	.driver_data = &pxa_cpufreq_data, | 
 | }; | 
 |  | 
 | static int __init pxa_cpu_init(void) | 
 | { | 
 | 	int ret = -ENODEV; | 
 |  | 
 | 	pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core"); | 
 | 	if (IS_ERR(pxa_cpufreq_data.clk_core)) | 
 | 		return PTR_ERR(pxa_cpufreq_data.clk_core); | 
 |  | 
 | 	if (cpu_is_pxa25x() || cpu_is_pxa27x()) | 
 | 		ret = cpufreq_register_driver(&pxa_cpufreq_driver); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit pxa_cpu_exit(void) | 
 | { | 
 | 	cpufreq_unregister_driver(&pxa_cpufreq_driver); | 
 | } | 
 |  | 
 |  | 
 | MODULE_AUTHOR("Intrinsyc Software Inc."); | 
 | MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); | 
 | MODULE_LICENSE("GPL"); | 
 | module_init(pxa_cpu_init); | 
 | module_exit(pxa_cpu_exit); |