|  | /* | 
|  | * Copyright 2012 by Oracle Inc | 
|  | * Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 
|  | * | 
|  | * This code borrows ideas from https://lkml.org/lkml/2011/11/30/249 | 
|  | * so many thanks go to Kevin Tian <kevin.tian@intel.com> | 
|  | * and Yu Ke <ke.yu@intel.com>. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms and conditions of the GNU General Public License, | 
|  | * version 2, as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/cpumask.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/syscore_ops.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <acpi/processor.h> | 
|  | #include <xen/xen.h> | 
|  | #include <xen/interface/platform.h> | 
|  | #include <asm/xen/hypercall.h> | 
|  |  | 
|  | static int no_hypercall; | 
|  | MODULE_PARM_DESC(off, "Inhibit the hypercall."); | 
|  | module_param_named(off, no_hypercall, int, 0400); | 
|  |  | 
|  | /* | 
|  | * Note: Do not convert the acpi_id* below to cpumask_var_t or use cpumask_bit | 
|  | * - as those shrink to nr_cpu_bits (which is dependent on possible_cpu), which | 
|  | * can be less than what we want to put in. Instead use the 'nr_acpi_bits' | 
|  | * which is dynamically computed based on the MADT or x2APIC table. | 
|  | */ | 
|  | static unsigned int nr_acpi_bits; | 
|  | /* Mutex to protect the acpi_ids_done - for CPU hotplug use. */ | 
|  | static DEFINE_MUTEX(acpi_ids_mutex); | 
|  | /* Which ACPI ID we have processed from 'struct acpi_processor'. */ | 
|  | static unsigned long *acpi_ids_done; | 
|  | /* Which ACPI ID exist in the SSDT/DSDT processor definitions. */ | 
|  | static unsigned long *acpi_id_present; | 
|  | /* And if there is an _CST definition (or a PBLK) for the ACPI IDs */ | 
|  | static unsigned long *acpi_id_cst_present; | 
|  | /* Which ACPI P-State dependencies for a enumerated processor */ | 
|  | static struct acpi_psd_package *acpi_psd; | 
|  |  | 
|  | static int push_cxx_to_hypervisor(struct acpi_processor *_pr) | 
|  | { | 
|  | struct xen_platform_op op = { | 
|  | .cmd			= XENPF_set_processor_pminfo, | 
|  | .interface_version	= XENPF_INTERFACE_VERSION, | 
|  | .u.set_pminfo.id	= _pr->acpi_id, | 
|  | .u.set_pminfo.type	= XEN_PM_CX, | 
|  | }; | 
|  | struct xen_processor_cx *dst_cx, *dst_cx_states = NULL; | 
|  | struct acpi_processor_cx *cx; | 
|  | unsigned int i, ok; | 
|  | int ret = 0; | 
|  |  | 
|  | dst_cx_states = kcalloc(_pr->power.count, | 
|  | sizeof(struct xen_processor_cx), GFP_KERNEL); | 
|  | if (!dst_cx_states) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (ok = 0, i = 1; i <= _pr->power.count; i++) { | 
|  | cx = &_pr->power.states[i]; | 
|  | if (!cx->valid) | 
|  | continue; | 
|  |  | 
|  | dst_cx = &(dst_cx_states[ok++]); | 
|  |  | 
|  | dst_cx->reg.space_id = ACPI_ADR_SPACE_SYSTEM_IO; | 
|  | if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { | 
|  | dst_cx->reg.bit_width = 8; | 
|  | dst_cx->reg.bit_offset = 0; | 
|  | dst_cx->reg.access_size = 1; | 
|  | } else { | 
|  | dst_cx->reg.space_id = ACPI_ADR_SPACE_FIXED_HARDWARE; | 
|  | if (cx->entry_method == ACPI_CSTATE_FFH) { | 
|  | /* NATIVE_CSTATE_BEYOND_HALT */ | 
|  | dst_cx->reg.bit_offset = 2; | 
|  | dst_cx->reg.bit_width = 1; /* VENDOR_INTEL */ | 
|  | } | 
|  | dst_cx->reg.access_size = 0; | 
|  | } | 
|  | dst_cx->reg.address = cx->address; | 
|  |  | 
|  | dst_cx->type = cx->type; | 
|  | dst_cx->latency = cx->latency; | 
|  |  | 
|  | dst_cx->dpcnt = 0; | 
|  | set_xen_guest_handle(dst_cx->dp, NULL); | 
|  | } | 
|  | if (!ok) { | 
|  | pr_debug("No _Cx for ACPI CPU %u\n", _pr->acpi_id); | 
|  | kfree(dst_cx_states); | 
|  | return -EINVAL; | 
|  | } | 
|  | op.u.set_pminfo.power.count = ok; | 
|  | op.u.set_pminfo.power.flags.bm_control = _pr->flags.bm_control; | 
|  | op.u.set_pminfo.power.flags.bm_check = _pr->flags.bm_check; | 
|  | op.u.set_pminfo.power.flags.has_cst = _pr->flags.has_cst; | 
|  | op.u.set_pminfo.power.flags.power_setup_done = | 
|  | _pr->flags.power_setup_done; | 
|  |  | 
|  | set_xen_guest_handle(op.u.set_pminfo.power.states, dst_cx_states); | 
|  |  | 
|  | if (!no_hypercall) | 
|  | ret = HYPERVISOR_platform_op(&op); | 
|  |  | 
|  | if (!ret) { | 
|  | pr_debug("ACPI CPU%u - C-states uploaded.\n", _pr->acpi_id); | 
|  | for (i = 1; i <= _pr->power.count; i++) { | 
|  | cx = &_pr->power.states[i]; | 
|  | if (!cx->valid) | 
|  | continue; | 
|  | pr_debug("     C%d: %s %d uS\n", | 
|  | cx->type, cx->desc, (u32)cx->latency); | 
|  | } | 
|  | } else if ((ret != -EINVAL) && (ret != -ENOSYS)) | 
|  | /* EINVAL means the ACPI ID is incorrect - meaning the ACPI | 
|  | * table is referencing a non-existing CPU - which can happen | 
|  | * with broken ACPI tables. */ | 
|  | pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n", | 
|  | ret, _pr->acpi_id); | 
|  |  | 
|  | kfree(dst_cx_states); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | static struct xen_processor_px * | 
|  | xen_copy_pss_data(struct acpi_processor *_pr, | 
|  | struct xen_processor_performance *dst_perf) | 
|  | { | 
|  | struct xen_processor_px *dst_states = NULL; | 
|  | unsigned int i; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct xen_processor_px) != | 
|  | sizeof(struct acpi_processor_px)); | 
|  |  | 
|  | dst_states = kcalloc(_pr->performance->state_count, | 
|  | sizeof(struct xen_processor_px), GFP_KERNEL); | 
|  | if (!dst_states) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | dst_perf->state_count = _pr->performance->state_count; | 
|  | for (i = 0; i < _pr->performance->state_count; i++) { | 
|  | /* Fortunatly for us, they are both the same size */ | 
|  | memcpy(&(dst_states[i]), &(_pr->performance->states[i]), | 
|  | sizeof(struct acpi_processor_px)); | 
|  | } | 
|  | return dst_states; | 
|  | } | 
|  | static int xen_copy_psd_data(struct acpi_processor *_pr, | 
|  | struct xen_processor_performance *dst) | 
|  | { | 
|  | struct acpi_psd_package *pdomain; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct xen_psd_package) != | 
|  | sizeof(struct acpi_psd_package)); | 
|  |  | 
|  | /* This information is enumerated only if acpi_processor_preregister_performance | 
|  | * has been called. | 
|  | */ | 
|  | dst->shared_type = _pr->performance->shared_type; | 
|  |  | 
|  | pdomain = &(_pr->performance->domain_info); | 
|  |  | 
|  | /* 'acpi_processor_preregister_performance' does not parse if the | 
|  | * num_processors <= 1, but Xen still requires it. Do it manually here. | 
|  | */ | 
|  | if (pdomain->num_processors <= 1) { | 
|  | if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) | 
|  | dst->shared_type = CPUFREQ_SHARED_TYPE_ALL; | 
|  | else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) | 
|  | dst->shared_type = CPUFREQ_SHARED_TYPE_HW; | 
|  | else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY) | 
|  | dst->shared_type = CPUFREQ_SHARED_TYPE_ANY; | 
|  |  | 
|  | } | 
|  | memcpy(&(dst->domain_info), pdomain, sizeof(struct acpi_psd_package)); | 
|  | return 0; | 
|  | } | 
|  | static int xen_copy_pct_data(struct acpi_pct_register *pct, | 
|  | struct xen_pct_register *dst_pct) | 
|  | { | 
|  | /* It would be nice if you could just do 'memcpy(pct, dst_pct') but | 
|  | * sadly the Xen structure did not have the proper padding so the | 
|  | * descriptor field takes two (dst_pct) bytes instead of one (pct). | 
|  | */ | 
|  | dst_pct->descriptor = pct->descriptor; | 
|  | dst_pct->length = pct->length; | 
|  | dst_pct->space_id = pct->space_id; | 
|  | dst_pct->bit_width = pct->bit_width; | 
|  | dst_pct->bit_offset = pct->bit_offset; | 
|  | dst_pct->reserved = pct->reserved; | 
|  | dst_pct->address = pct->address; | 
|  | return 0; | 
|  | } | 
|  | static int push_pxx_to_hypervisor(struct acpi_processor *_pr) | 
|  | { | 
|  | int ret = 0; | 
|  | struct xen_platform_op op = { | 
|  | .cmd			= XENPF_set_processor_pminfo, | 
|  | .interface_version	= XENPF_INTERFACE_VERSION, | 
|  | .u.set_pminfo.id	= _pr->acpi_id, | 
|  | .u.set_pminfo.type	= XEN_PM_PX, | 
|  | }; | 
|  | struct xen_processor_performance *dst_perf; | 
|  | struct xen_processor_px *dst_states = NULL; | 
|  |  | 
|  | dst_perf = &op.u.set_pminfo.perf; | 
|  |  | 
|  | dst_perf->platform_limit = _pr->performance_platform_limit; | 
|  | dst_perf->flags |= XEN_PX_PPC; | 
|  | xen_copy_pct_data(&(_pr->performance->control_register), | 
|  | &dst_perf->control_register); | 
|  | xen_copy_pct_data(&(_pr->performance->status_register), | 
|  | &dst_perf->status_register); | 
|  | dst_perf->flags |= XEN_PX_PCT; | 
|  | dst_states = xen_copy_pss_data(_pr, dst_perf); | 
|  | if (!IS_ERR_OR_NULL(dst_states)) { | 
|  | set_xen_guest_handle(dst_perf->states, dst_states); | 
|  | dst_perf->flags |= XEN_PX_PSS; | 
|  | } | 
|  | if (!xen_copy_psd_data(_pr, dst_perf)) | 
|  | dst_perf->flags |= XEN_PX_PSD; | 
|  |  | 
|  | if (dst_perf->flags != (XEN_PX_PSD | XEN_PX_PSS | XEN_PX_PCT | XEN_PX_PPC)) { | 
|  | pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n", | 
|  | _pr->acpi_id, dst_perf->flags); | 
|  | ret = -ENODEV; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (!no_hypercall) | 
|  | ret = HYPERVISOR_platform_op(&op); | 
|  |  | 
|  | if (!ret) { | 
|  | struct acpi_processor_performance *perf; | 
|  | unsigned int i; | 
|  |  | 
|  | perf = _pr->performance; | 
|  | pr_debug("ACPI CPU%u - P-states uploaded.\n", _pr->acpi_id); | 
|  | for (i = 0; i < perf->state_count; i++) { | 
|  | pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n", | 
|  | (i == perf->state ? '*' : ' '), i, | 
|  | (u32) perf->states[i].core_frequency, | 
|  | (u32) perf->states[i].power, | 
|  | (u32) perf->states[i].transition_latency); | 
|  | } | 
|  | } else if ((ret != -EINVAL) && (ret != -ENOSYS)) | 
|  | /* EINVAL means the ACPI ID is incorrect - meaning the ACPI | 
|  | * table is referencing a non-existing CPU - which can happen | 
|  | * with broken ACPI tables. */ | 
|  | pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n", | 
|  | ret, _pr->acpi_id); | 
|  | err_free: | 
|  | if (!IS_ERR_OR_NULL(dst_states)) | 
|  | kfree(dst_states); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | static int upload_pm_data(struct acpi_processor *_pr) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | mutex_lock(&acpi_ids_mutex); | 
|  | if (__test_and_set_bit(_pr->acpi_id, acpi_ids_done)) { | 
|  | mutex_unlock(&acpi_ids_mutex); | 
|  | return -EBUSY; | 
|  | } | 
|  | if (_pr->flags.power) | 
|  | err = push_cxx_to_hypervisor(_pr); | 
|  |  | 
|  | if (_pr->performance && _pr->performance->states) | 
|  | err |= push_pxx_to_hypervisor(_pr); | 
|  |  | 
|  | mutex_unlock(&acpi_ids_mutex); | 
|  | return err; | 
|  | } | 
|  | static unsigned int __init get_max_acpi_id(void) | 
|  | { | 
|  | struct xenpf_pcpuinfo *info; | 
|  | struct xen_platform_op op = { | 
|  | .cmd = XENPF_get_cpuinfo, | 
|  | .interface_version = XENPF_INTERFACE_VERSION, | 
|  | }; | 
|  | int ret = 0; | 
|  | unsigned int i, last_cpu, max_acpi_id = 0; | 
|  |  | 
|  | info = &op.u.pcpu_info; | 
|  | info->xen_cpuid = 0; | 
|  |  | 
|  | ret = HYPERVISOR_platform_op(&op); | 
|  | if (ret) | 
|  | return NR_CPUS; | 
|  |  | 
|  | /* The max_present is the same irregardless of the xen_cpuid */ | 
|  | last_cpu = op.u.pcpu_info.max_present; | 
|  | for (i = 0; i <= last_cpu; i++) { | 
|  | info->xen_cpuid = i; | 
|  | ret = HYPERVISOR_platform_op(&op); | 
|  | if (ret) | 
|  | continue; | 
|  | max_acpi_id = max(info->acpi_id, max_acpi_id); | 
|  | } | 
|  | max_acpi_id *= 2; /* Slack for CPU hotplug support. */ | 
|  | pr_debug("Max ACPI ID: %u\n", max_acpi_id); | 
|  | return max_acpi_id; | 
|  | } | 
|  | /* | 
|  | * The read_acpi_id and check_acpi_ids are there to support the Xen | 
|  | * oddity of virtual CPUs != physical CPUs in the initial domain. | 
|  | * The user can supply 'xen_max_vcpus=X' on the Xen hypervisor line | 
|  | * which will band the amount of CPUs the initial domain can see. | 
|  | * In general that is OK, except it plays havoc with any of the | 
|  | * for_each_[present|online]_cpu macros which are banded to the virtual | 
|  | * CPU amount. | 
|  | */ | 
|  | static acpi_status | 
|  | read_acpi_id(acpi_handle handle, u32 lvl, void *context, void **rv) | 
|  | { | 
|  | u32 acpi_id; | 
|  | acpi_status status; | 
|  | acpi_object_type acpi_type; | 
|  | unsigned long long tmp; | 
|  | union acpi_object object = { 0 }; | 
|  | struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; | 
|  | acpi_io_address pblk = 0; | 
|  |  | 
|  | status = acpi_get_type(handle, &acpi_type); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return AE_OK; | 
|  |  | 
|  | switch (acpi_type) { | 
|  | case ACPI_TYPE_PROCESSOR: | 
|  | status = acpi_evaluate_object(handle, NULL, NULL, &buffer); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return AE_OK; | 
|  | acpi_id = object.processor.proc_id; | 
|  | pblk = object.processor.pblk_address; | 
|  | break; | 
|  | case ACPI_TYPE_DEVICE: | 
|  | status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return AE_OK; | 
|  | acpi_id = tmp; | 
|  | break; | 
|  | default: | 
|  | return AE_OK; | 
|  | } | 
|  | if (invalid_phys_cpuid(acpi_get_phys_id(handle, | 
|  | acpi_type == ACPI_TYPE_DEVICE, | 
|  | acpi_id))) { | 
|  | pr_debug("CPU with ACPI ID %u is unavailable\n", acpi_id); | 
|  | return AE_OK; | 
|  | } | 
|  | /* There are more ACPI Processor objects than in x2APIC or MADT. | 
|  | * This can happen with incorrect ACPI SSDT declerations. */ | 
|  | if (acpi_id >= nr_acpi_bits) { | 
|  | pr_debug("max acpi id %u, trying to set %u\n", | 
|  | nr_acpi_bits - 1, acpi_id); | 
|  | return AE_OK; | 
|  | } | 
|  | /* OK, There is a ACPI Processor object */ | 
|  | __set_bit(acpi_id, acpi_id_present); | 
|  |  | 
|  | pr_debug("ACPI CPU%u w/ PBLK:0x%lx\n", acpi_id, (unsigned long)pblk); | 
|  |  | 
|  | /* It has P-state dependencies */ | 
|  | if (!acpi_processor_get_psd(handle, &acpi_psd[acpi_id])) { | 
|  | pr_debug("ACPI CPU%u w/ PST:coord_type = %llu domain = %llu\n", | 
|  | acpi_id, acpi_psd[acpi_id].coord_type, | 
|  | acpi_psd[acpi_id].domain); | 
|  | } | 
|  |  | 
|  | status = acpi_evaluate_object(handle, "_CST", NULL, &buffer); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | if (!pblk) | 
|  | return AE_OK; | 
|  | } | 
|  | /* .. and it has a C-state */ | 
|  | __set_bit(acpi_id, acpi_id_cst_present); | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  | static int check_acpi_ids(struct acpi_processor *pr_backup) | 
|  | { | 
|  |  | 
|  | if (!pr_backup) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (acpi_id_present && acpi_id_cst_present) | 
|  | /* OK, done this once .. skip to uploading */ | 
|  | goto upload; | 
|  |  | 
|  | /* All online CPUs have been processed at this stage. Now verify | 
|  | * whether in fact "online CPUs" == physical CPUs. | 
|  | */ | 
|  | acpi_id_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL); | 
|  | if (!acpi_id_present) | 
|  | return -ENOMEM; | 
|  |  | 
|  | acpi_id_cst_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL); | 
|  | if (!acpi_id_cst_present) { | 
|  | kfree(acpi_id_present); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | acpi_psd = kcalloc(nr_acpi_bits, sizeof(struct acpi_psd_package), | 
|  | GFP_KERNEL); | 
|  | if (!acpi_psd) { | 
|  | kfree(acpi_id_present); | 
|  | kfree(acpi_id_cst_present); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, | 
|  | ACPI_UINT32_MAX, | 
|  | read_acpi_id, NULL, NULL, NULL); | 
|  | acpi_get_devices(ACPI_PROCESSOR_DEVICE_HID, read_acpi_id, NULL, NULL); | 
|  |  | 
|  | upload: | 
|  | if (!bitmap_equal(acpi_id_present, acpi_ids_done, nr_acpi_bits)) { | 
|  | unsigned int i; | 
|  | for_each_set_bit(i, acpi_id_present, nr_acpi_bits) { | 
|  | pr_backup->acpi_id = i; | 
|  | /* Mask out C-states if there are no _CST or PBLK */ | 
|  | pr_backup->flags.power = test_bit(i, acpi_id_cst_present); | 
|  | /* num_entries is non-zero if we evaluated _PSD */ | 
|  | if (acpi_psd[i].num_entries) { | 
|  | memcpy(&pr_backup->performance->domain_info, | 
|  | &acpi_psd[i], | 
|  | sizeof(struct acpi_psd_package)); | 
|  | } | 
|  | (void)upload_pm_data(pr_backup); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* acpi_perf_data is a pointer to percpu data. */ | 
|  | static struct acpi_processor_performance __percpu *acpi_perf_data; | 
|  |  | 
|  | static void free_acpi_perf_data(void) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ | 
|  | for_each_possible_cpu(i) | 
|  | free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) | 
|  | ->shared_cpu_map); | 
|  | free_percpu(acpi_perf_data); | 
|  | } | 
|  |  | 
|  | static int xen_upload_processor_pm_data(void) | 
|  | { | 
|  | struct acpi_processor *pr_backup = NULL; | 
|  | unsigned int i; | 
|  | int rc = 0; | 
|  |  | 
|  | pr_info("Uploading Xen processor PM info\n"); | 
|  |  | 
|  | for_each_possible_cpu(i) { | 
|  | struct acpi_processor *_pr; | 
|  | _pr = per_cpu(processors, i /* APIC ID */); | 
|  | if (!_pr) | 
|  | continue; | 
|  |  | 
|  | if (!pr_backup) { | 
|  | pr_backup = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); | 
|  | if (pr_backup) | 
|  | memcpy(pr_backup, _pr, sizeof(struct acpi_processor)); | 
|  | } | 
|  | (void)upload_pm_data(_pr); | 
|  | } | 
|  |  | 
|  | rc = check_acpi_ids(pr_backup); | 
|  | kfree(pr_backup); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void xen_acpi_processor_resume_worker(struct work_struct *dummy) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | bitmap_zero(acpi_ids_done, nr_acpi_bits); | 
|  |  | 
|  | rc = xen_upload_processor_pm_data(); | 
|  | if (rc != 0) | 
|  | pr_info("ACPI data upload failed, error = %d\n", rc); | 
|  | } | 
|  |  | 
|  | static void xen_acpi_processor_resume(void) | 
|  | { | 
|  | static DECLARE_WORK(wq, xen_acpi_processor_resume_worker); | 
|  |  | 
|  | /* | 
|  | * xen_upload_processor_pm_data() calls non-atomic code. | 
|  | * However, the context for xen_acpi_processor_resume is syscore | 
|  | * with only the boot CPU online and in an atomic context. | 
|  | * | 
|  | * So defer the upload for some point safer. | 
|  | */ | 
|  | schedule_work(&wq); | 
|  | } | 
|  |  | 
|  | static struct syscore_ops xap_syscore_ops = { | 
|  | .resume	= xen_acpi_processor_resume, | 
|  | }; | 
|  |  | 
|  | static int __init xen_acpi_processor_init(void) | 
|  | { | 
|  | unsigned int i; | 
|  | int rc; | 
|  |  | 
|  | if (!xen_initial_domain()) | 
|  | return -ENODEV; | 
|  |  | 
|  | nr_acpi_bits = get_max_acpi_id() + 1; | 
|  | acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL); | 
|  | if (!acpi_ids_done) | 
|  | return -ENOMEM; | 
|  |  | 
|  | acpi_perf_data = alloc_percpu(struct acpi_processor_performance); | 
|  | if (!acpi_perf_data) { | 
|  | pr_debug("Memory allocation error for acpi_perf_data\n"); | 
|  | kfree(acpi_ids_done); | 
|  | return -ENOMEM; | 
|  | } | 
|  | for_each_possible_cpu(i) { | 
|  | if (!zalloc_cpumask_var_node( | 
|  | &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, | 
|  | GFP_KERNEL, cpu_to_node(i))) { | 
|  | rc = -ENOMEM; | 
|  | goto err_out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do initialization in ACPI core. It is OK to fail here. */ | 
|  | (void)acpi_processor_preregister_performance(acpi_perf_data); | 
|  |  | 
|  | for_each_possible_cpu(i) { | 
|  | struct acpi_processor *pr; | 
|  | struct acpi_processor_performance *perf; | 
|  |  | 
|  | pr = per_cpu(processors, i); | 
|  | perf = per_cpu_ptr(acpi_perf_data, i); | 
|  | if (!pr) | 
|  | continue; | 
|  |  | 
|  | pr->performance = perf; | 
|  | rc = acpi_processor_get_performance_info(pr); | 
|  | if (rc) | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | rc = xen_upload_processor_pm_data(); | 
|  | if (rc) | 
|  | goto err_unregister; | 
|  |  | 
|  | register_syscore_ops(&xap_syscore_ops); | 
|  |  | 
|  | return 0; | 
|  | err_unregister: | 
|  | for_each_possible_cpu(i) | 
|  | acpi_processor_unregister_performance(i); | 
|  |  | 
|  | err_out: | 
|  | /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ | 
|  | free_acpi_perf_data(); | 
|  | kfree(acpi_ids_done); | 
|  | return rc; | 
|  | } | 
|  | static void __exit xen_acpi_processor_exit(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | unregister_syscore_ops(&xap_syscore_ops); | 
|  | kfree(acpi_ids_done); | 
|  | kfree(acpi_id_present); | 
|  | kfree(acpi_id_cst_present); | 
|  | kfree(acpi_psd); | 
|  | for_each_possible_cpu(i) | 
|  | acpi_processor_unregister_performance(i); | 
|  |  | 
|  | free_acpi_perf_data(); | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>"); | 
|  | MODULE_DESCRIPTION("Xen ACPI Processor P-states (and Cx) driver which uploads PM data to Xen hypervisor"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /* We want to be loaded before the CPU freq scaling drivers are loaded. | 
|  | * They are loaded in late_initcall. */ | 
|  | device_initcall(xen_acpi_processor_init); | 
|  | module_exit(xen_acpi_processor_exit); |