|  | /* ------------------------------------------------------------------------- */ | 
|  | /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x       */ | 
|  | /* ------------------------------------------------------------------------- */ | 
|  | /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd | 
|  | *                    <Peter dot Milne at D hyphen TACQ dot com> | 
|  | * | 
|  | * With acknowledgements to i2c-algo-ibm_ocp.c by | 
|  | * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com | 
|  | * | 
|  | * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund: | 
|  | * | 
|  | * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund | 
|  | * | 
|  | * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>, | 
|  | * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com> | 
|  | * | 
|  | * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005: | 
|  | * | 
|  | * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs | 
|  | * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference | 
|  | * - Make it work with IXP46x chips | 
|  | * - Cleanup function names, coding style, etc | 
|  | * | 
|  | * - writing to slave address causes latchup on iop331. | 
|  | *	fix: driver refuses to address self. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation, version 2. | 
|  | */ | 
|  |  | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/gpio.h> | 
|  |  | 
|  | #include "i2c-iop3xx.h" | 
|  |  | 
|  | /* global unit counter */ | 
|  | static int i2c_id; | 
|  |  | 
|  | static inline unsigned char | 
|  | iic_cook_addr(struct i2c_msg *msg) | 
|  | { | 
|  | unsigned char addr; | 
|  |  | 
|  | addr = i2c_8bit_addr_from_msg(msg); | 
|  |  | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | static void | 
|  | iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap) | 
|  | { | 
|  | /* Follows devman 9.3 */ | 
|  | __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET); | 
|  | __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | } | 
|  |  | 
|  | static void | 
|  | iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) | 
|  | { | 
|  | u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE; | 
|  |  | 
|  | /* | 
|  | * Every time unit enable is asserted, GPOD needs to be cleared | 
|  | * on IOP3XX to avoid data corruption on the bus. | 
|  | */ | 
|  | #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X) | 
|  | if (iop3xx_adap->id == 0) { | 
|  | gpio_set_value(7, 0); | 
|  | gpio_set_value(6, 0); | 
|  | } else { | 
|  | gpio_set_value(5, 0); | 
|  | gpio_set_value(4, 0); | 
|  | } | 
|  | #endif | 
|  | /* NB SR bits not same position as CR IE bits :-( */ | 
|  | iop3xx_adap->SR_enabled = | 
|  | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD | | 
|  | IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY; | 
|  |  | 
|  | cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | | 
|  | IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE; | 
|  |  | 
|  | __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | } | 
|  |  | 
|  | static void | 
|  | iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap) | 
|  | { | 
|  | unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); | 
|  |  | 
|  | cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | | 
|  | IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN); | 
|  |  | 
|  | __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NB: the handler has to clear the source of the interrupt! | 
|  | * Then it passes the SR flags of interest to BH via adap data | 
|  | */ | 
|  | static irqreturn_t | 
|  | iop3xx_i2c_irq_handler(int this_irq, void *dev_id) | 
|  | { | 
|  | struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id; | 
|  | u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET); | 
|  |  | 
|  | if ((sr &= iop3xx_adap->SR_enabled)) { | 
|  | __raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET); | 
|  | iop3xx_adap->SR_received |= sr; | 
|  | wake_up_interruptible(&iop3xx_adap->waitq); | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* check all error conditions, clear them , report most important */ | 
|  | static int | 
|  | iop3xx_i2c_error(u32 sr) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | if ((sr & IOP3XX_ISR_BERRD)) { | 
|  | if ( !rc ) rc = -I2C_ERR_BERR; | 
|  | } | 
|  | if ((sr & IOP3XX_ISR_ALD)) { | 
|  | if ( !rc ) rc = -I2C_ERR_ALD; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static inline u32 | 
|  | iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 sr; | 
|  |  | 
|  | spin_lock_irqsave(&iop3xx_adap->lock, flags); | 
|  | sr = iop3xx_adap->SR_received; | 
|  | iop3xx_adap->SR_received = 0; | 
|  | spin_unlock_irqrestore(&iop3xx_adap->lock, flags); | 
|  |  | 
|  | return sr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sleep until interrupted, then recover and analyse the SR | 
|  | * saved by handler | 
|  | */ | 
|  | typedef int (* compare_func)(unsigned test, unsigned mask); | 
|  | /* returns 1 on correct comparison */ | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, | 
|  | unsigned flags, unsigned* status, | 
|  | compare_func compare) | 
|  | { | 
|  | unsigned sr = 0; | 
|  | int interrupted; | 
|  | int done; | 
|  | int rc = 0; | 
|  |  | 
|  | do { | 
|  | interrupted = wait_event_interruptible_timeout ( | 
|  | iop3xx_adap->waitq, | 
|  | (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), | 
|  | 1 * HZ | 
|  | ); | 
|  | if ((rc = iop3xx_i2c_error(sr)) < 0) { | 
|  | *status = sr; | 
|  | return rc; | 
|  | } else if (!interrupted) { | 
|  | *status = sr; | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | } while(!done); | 
|  |  | 
|  | *status = sr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Concrete compare_funcs | 
|  | */ | 
|  | static int | 
|  | all_bits_clear(unsigned test, unsigned mask) | 
|  | { | 
|  | return (test & mask) == 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | any_bits_set(unsigned test, unsigned mask) | 
|  | { | 
|  | return (test & mask) != 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) | 
|  | { | 
|  | return iop3xx_i2c_wait_event( | 
|  | iop3xx_adap, | 
|  | IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, | 
|  | status, any_bits_set); | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) | 
|  | { | 
|  | return iop3xx_i2c_wait_event( | 
|  | iop3xx_adap, | 
|  | IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, | 
|  | status,	any_bits_set); | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) | 
|  | { | 
|  | return iop3xx_i2c_wait_event( | 
|  | iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear); | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, | 
|  | struct i2c_msg* msg) | 
|  | { | 
|  | unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | int status; | 
|  | int rc; | 
|  |  | 
|  | /* avoid writing to my slave address (hangs on 80331), | 
|  | * forbidden in Intel developer manual | 
|  | */ | 
|  | if (msg->addr == MYSAR) { | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET); | 
|  |  | 
|  | cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); | 
|  | cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE; | 
|  |  | 
|  | __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, | 
|  | int stop) | 
|  | { | 
|  | unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | int status; | 
|  | int rc = 0; | 
|  |  | 
|  | __raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET); | 
|  | cr &= ~IOP3XX_ICR_MSTART; | 
|  | if (stop) { | 
|  | cr |= IOP3XX_ICR_MSTOP; | 
|  | } else { | 
|  | cr &= ~IOP3XX_ICR_MSTOP; | 
|  | } | 
|  | cr |= IOP3XX_ICR_TBYTE; | 
|  | __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, | 
|  | int stop) | 
|  | { | 
|  | unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); | 
|  | int status; | 
|  | int rc = 0; | 
|  |  | 
|  | cr &= ~IOP3XX_ICR_MSTART; | 
|  |  | 
|  | if (stop) { | 
|  | cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK; | 
|  | } else { | 
|  | cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); | 
|  | } | 
|  | cr |= IOP3XX_ICR_TBYTE; | 
|  | __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); | 
|  |  | 
|  | rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status); | 
|  |  | 
|  | *byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count) | 
|  | { | 
|  | struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; | 
|  | int ii; | 
|  | int rc = 0; | 
|  |  | 
|  | for (ii = 0; rc == 0 && ii != count; ++ii) | 
|  | rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) | 
|  | { | 
|  | struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; | 
|  | int ii; | 
|  | int rc = 0; | 
|  |  | 
|  | for (ii = 0; rc == 0 && ii != count; ++ii) | 
|  | rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Description:  This function implements combined transactions.  Combined | 
|  | * transactions consist of combinations of reading and writing blocks of data. | 
|  | * FROM THE SAME ADDRESS | 
|  | * Each transfer (i.e. a read or a write) is separated by a repeated start | 
|  | * condition. | 
|  | */ | 
|  | static int | 
|  | iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) | 
|  | { | 
|  | struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; | 
|  | int rc; | 
|  |  | 
|  | rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg); | 
|  | if (rc < 0) { | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | if ((pmsg->flags&I2C_M_RD)) { | 
|  | return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len); | 
|  | } else { | 
|  | return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * master_xfer() - main read/write entry | 
|  | */ | 
|  | static int | 
|  | iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, | 
|  | int num) | 
|  | { | 
|  | struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; | 
|  | int im = 0; | 
|  | int ret = 0; | 
|  | int status; | 
|  |  | 
|  | iop3xx_i2c_wait_idle(iop3xx_adap, &status); | 
|  | iop3xx_i2c_reset(iop3xx_adap); | 
|  | iop3xx_i2c_enable(iop3xx_adap); | 
|  |  | 
|  | for (im = 0; ret == 0 && im != num; im++) { | 
|  | ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]); | 
|  | } | 
|  |  | 
|  | iop3xx_i2c_transaction_cleanup(iop3xx_adap); | 
|  |  | 
|  | if(ret) | 
|  | return ret; | 
|  |  | 
|  | return im; | 
|  | } | 
|  |  | 
|  | static u32 | 
|  | iop3xx_i2c_func(struct i2c_adapter *adap) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | 
|  | } | 
|  |  | 
|  | static const struct i2c_algorithm iop3xx_i2c_algo = { | 
|  | .master_xfer	= iop3xx_i2c_master_xfer, | 
|  | .functionality	= iop3xx_i2c_func, | 
|  | }; | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct i2c_adapter *padapter = platform_get_drvdata(pdev); | 
|  | struct i2c_algo_iop3xx_data *adapter_data = | 
|  | (struct i2c_algo_iop3xx_data *)padapter->algo_data; | 
|  | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET); | 
|  |  | 
|  | /* | 
|  | * Disable the actual HW unit | 
|  | */ | 
|  | cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | | 
|  | IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE); | 
|  | __raw_writel(cr, adapter_data->ioaddr + CR_OFFSET); | 
|  |  | 
|  | iounmap(adapter_data->ioaddr); | 
|  | release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); | 
|  | kfree(adapter_data); | 
|  | kfree(padapter); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iop3xx_i2c_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct resource *res; | 
|  | int ret, irq; | 
|  | struct i2c_adapter *new_adapter; | 
|  | struct i2c_algo_iop3xx_data *adapter_data; | 
|  |  | 
|  | new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); | 
|  | if (!new_adapter) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); | 
|  | if (!adapter_data) { | 
|  | ret = -ENOMEM; | 
|  | goto free_adapter; | 
|  | } | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | ret = -ENODEV; | 
|  | goto free_both; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) { | 
|  | ret = -EBUSY; | 
|  | goto free_both; | 
|  | } | 
|  |  | 
|  | /* set the adapter enumeration # */ | 
|  | adapter_data->id = i2c_id++; | 
|  |  | 
|  | adapter_data->ioaddr = ioremap(res->start, IOP3XX_I2C_IO_SIZE); | 
|  | if (!adapter_data->ioaddr) { | 
|  | ret = -ENOMEM; | 
|  | goto release_region; | 
|  | } | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | ret = -ENXIO; | 
|  | goto unmap; | 
|  | } | 
|  | ret = request_irq(irq, iop3xx_i2c_irq_handler, 0, | 
|  | pdev->name, adapter_data); | 
|  |  | 
|  | if (ret) { | 
|  | ret = -EIO; | 
|  | goto unmap; | 
|  | } | 
|  |  | 
|  | memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); | 
|  | new_adapter->owner = THIS_MODULE; | 
|  | new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; | 
|  | new_adapter->dev.parent = &pdev->dev; | 
|  | new_adapter->nr = pdev->id; | 
|  |  | 
|  | /* | 
|  | * Default values...should these come in from board code? | 
|  | */ | 
|  | new_adapter->timeout = HZ; | 
|  | new_adapter->algo = &iop3xx_i2c_algo; | 
|  |  | 
|  | init_waitqueue_head(&adapter_data->waitq); | 
|  | spin_lock_init(&adapter_data->lock); | 
|  |  | 
|  | iop3xx_i2c_reset(adapter_data); | 
|  | iop3xx_i2c_enable(adapter_data); | 
|  |  | 
|  | platform_set_drvdata(pdev, new_adapter); | 
|  | new_adapter->algo_data = adapter_data; | 
|  |  | 
|  | i2c_add_numbered_adapter(new_adapter); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | unmap: | 
|  | iounmap(adapter_data->ioaddr); | 
|  |  | 
|  | release_region: | 
|  | release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); | 
|  |  | 
|  | free_both: | 
|  | kfree(adapter_data); | 
|  |  | 
|  | free_adapter: | 
|  | kfree(new_adapter); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct platform_driver iop3xx_i2c_driver = { | 
|  | .probe		= iop3xx_i2c_probe, | 
|  | .remove		= iop3xx_i2c_remove, | 
|  | .driver		= { | 
|  | .name	= "IOP3xx-I2C", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(iop3xx_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>"); | 
|  | MODULE_DESCRIPTION("IOP3xx iic algorithm and driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:IOP3xx-I2C"); |