|  | /* | 
|  | * twl6040-vibra.c - TWL6040 Vibrator driver | 
|  | * | 
|  | * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com> | 
|  | * Author:      Misael Lopez Cruz <misael.lopez@ti.com> | 
|  | * | 
|  | * Copyright:   (C) 2011 Texas Instruments, Inc. | 
|  | * | 
|  | * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com> | 
|  | *				Felipe Balbi <felipe.balbi@nokia.com> | 
|  | *				Jari Vanhala <ext-javi.vanhala@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/mfd/twl6040.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | #define EFFECT_DIR_180_DEG	0x8000 | 
|  |  | 
|  | /* Recommended modulation index 85% */ | 
|  | #define TWL6040_VIBRA_MOD	85 | 
|  |  | 
|  | #define TWL6040_NUM_SUPPLIES 2 | 
|  |  | 
|  | struct vibra_info { | 
|  | struct device *dev; | 
|  | struct input_dev *input_dev; | 
|  | struct work_struct play_work; | 
|  |  | 
|  | int irq; | 
|  |  | 
|  | bool enabled; | 
|  | int weak_speed; | 
|  | int strong_speed; | 
|  | int direction; | 
|  |  | 
|  | unsigned int vibldrv_res; | 
|  | unsigned int vibrdrv_res; | 
|  | unsigned int viblmotor_res; | 
|  | unsigned int vibrmotor_res; | 
|  |  | 
|  | struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES]; | 
|  |  | 
|  | struct twl6040 *twl6040; | 
|  | }; | 
|  |  | 
|  | static irqreturn_t twl6040_vib_irq_handler(int irq, void *data) | 
|  | { | 
|  | struct vibra_info *info = data; | 
|  | struct twl6040 *twl6040 = info->twl6040; | 
|  | u8 status; | 
|  |  | 
|  | status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); | 
|  | if (status & TWL6040_VIBLOCDET) { | 
|  | dev_warn(info->dev, "Left Vibrator overcurrent detected\n"); | 
|  | twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL, | 
|  | TWL6040_VIBENA); | 
|  | } | 
|  | if (status & TWL6040_VIBROCDET) { | 
|  | dev_warn(info->dev, "Right Vibrator overcurrent detected\n"); | 
|  | twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR, | 
|  | TWL6040_VIBENA); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void twl6040_vibra_enable(struct vibra_info *info) | 
|  | { | 
|  | struct twl6040 *twl6040 = info->twl6040; | 
|  | int ret; | 
|  |  | 
|  | ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies); | 
|  | if (ret) { | 
|  | dev_err(info->dev, "failed to enable regulators %d\n", ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | twl6040_power(info->twl6040, 1); | 
|  | if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) { | 
|  | /* | 
|  | * ERRATA: Disable overcurrent protection for at least | 
|  | * 3ms when enabling vibrator drivers to avoid false | 
|  | * overcurrent detection | 
|  | */ | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | 
|  | TWL6040_VIBENA | TWL6040_VIBCTRL); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | 
|  | TWL6040_VIBENA | TWL6040_VIBCTRL); | 
|  | usleep_range(3000, 3500); | 
|  | } | 
|  |  | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | 
|  | TWL6040_VIBENA); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | 
|  | TWL6040_VIBENA); | 
|  |  | 
|  | info->enabled = true; | 
|  | } | 
|  |  | 
|  | static void twl6040_vibra_disable(struct vibra_info *info) | 
|  | { | 
|  | struct twl6040 *twl6040 = info->twl6040; | 
|  |  | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00); | 
|  | twl6040_power(info->twl6040, 0); | 
|  |  | 
|  | regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies); | 
|  |  | 
|  | info->enabled = false; | 
|  | } | 
|  |  | 
|  | static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res, | 
|  | int speed, int direction) | 
|  | { | 
|  | int vpk, max_code; | 
|  | u8 vibdat; | 
|  |  | 
|  | /* output swing */ | 
|  | vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) / | 
|  | (100 * (vibdrv_res + motor_res)); | 
|  |  | 
|  | /* 50mV per VIBDAT code step */ | 
|  | max_code = vpk / 50; | 
|  | if (max_code > TWL6040_VIBDAT_MAX) | 
|  | max_code = TWL6040_VIBDAT_MAX; | 
|  |  | 
|  | /* scale speed to max allowed code */ | 
|  | vibdat = (u8)((speed * max_code) / USHRT_MAX); | 
|  |  | 
|  | /* 2's complement for direction > 180 degrees */ | 
|  | vibdat *= direction; | 
|  |  | 
|  | return vibdat; | 
|  | } | 
|  |  | 
|  | static void twl6040_vibra_set_effect(struct vibra_info *info) | 
|  | { | 
|  | struct twl6040 *twl6040 = info->twl6040; | 
|  | u8 vibdatl, vibdatr; | 
|  | int volt; | 
|  |  | 
|  | /* weak motor */ | 
|  | volt = regulator_get_voltage(info->supplies[0].consumer) / 1000; | 
|  | vibdatl = twl6040_vibra_code(volt, info->vibldrv_res, | 
|  | info->viblmotor_res, | 
|  | info->weak_speed, info->direction); | 
|  |  | 
|  | /* strong motor */ | 
|  | volt = regulator_get_voltage(info->supplies[1].consumer) / 1000; | 
|  | vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res, | 
|  | info->vibrmotor_res, | 
|  | info->strong_speed, info->direction); | 
|  |  | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr); | 
|  | } | 
|  |  | 
|  | static void vibra_play_work(struct work_struct *work) | 
|  | { | 
|  | struct vibra_info *info = container_of(work, | 
|  | struct vibra_info, play_work); | 
|  | int ret; | 
|  |  | 
|  | /* Do not allow effect, while the routing is set to use audio */ | 
|  | ret = twl6040_get_vibralr_status(info->twl6040); | 
|  | if (ret & TWL6040_VIBSEL) { | 
|  | dev_info(info->dev, "Vibra is configured for audio\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (info->weak_speed || info->strong_speed) { | 
|  | if (!info->enabled) | 
|  | twl6040_vibra_enable(info); | 
|  |  | 
|  | twl6040_vibra_set_effect(info); | 
|  | } else if (info->enabled) | 
|  | twl6040_vibra_disable(info); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int vibra_play(struct input_dev *input, void *data, | 
|  | struct ff_effect *effect) | 
|  | { | 
|  | struct vibra_info *info = input_get_drvdata(input); | 
|  |  | 
|  | info->weak_speed = effect->u.rumble.weak_magnitude; | 
|  | info->strong_speed = effect->u.rumble.strong_magnitude; | 
|  | info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; | 
|  |  | 
|  | schedule_work(&info->play_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void twl6040_vibra_close(struct input_dev *input) | 
|  | { | 
|  | struct vibra_info *info = input_get_drvdata(input); | 
|  |  | 
|  | cancel_work_sync(&info->play_work); | 
|  |  | 
|  | if (info->enabled) | 
|  | twl6040_vibra_disable(info); | 
|  | } | 
|  |  | 
|  | static int __maybe_unused twl6040_vibra_suspend(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct vibra_info *info = platform_get_drvdata(pdev); | 
|  |  | 
|  | cancel_work_sync(&info->play_work); | 
|  |  | 
|  | if (info->enabled) | 
|  | twl6040_vibra_disable(info); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); | 
|  |  | 
|  | static int twl6040_vibra_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *twl6040_core_dev = pdev->dev.parent; | 
|  | struct device_node *twl6040_core_node; | 
|  | struct vibra_info *info; | 
|  | int vddvibl_uV = 0; | 
|  | int vddvibr_uV = 0; | 
|  | int error; | 
|  |  | 
|  | twl6040_core_node = of_get_child_by_name(twl6040_core_dev->of_node, | 
|  | "vibra"); | 
|  | if (!twl6040_core_node) { | 
|  | dev_err(&pdev->dev, "parent of node is missing?\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | 
|  | if (!info) { | 
|  | of_node_put(twl6040_core_node); | 
|  | dev_err(&pdev->dev, "couldn't allocate memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | info->dev = &pdev->dev; | 
|  |  | 
|  | info->twl6040 = dev_get_drvdata(pdev->dev.parent); | 
|  |  | 
|  | of_property_read_u32(twl6040_core_node, "ti,vibldrv-res", | 
|  | &info->vibldrv_res); | 
|  | of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res", | 
|  | &info->vibrdrv_res); | 
|  | of_property_read_u32(twl6040_core_node, "ti,viblmotor-res", | 
|  | &info->viblmotor_res); | 
|  | of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res", | 
|  | &info->vibrmotor_res); | 
|  | of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV); | 
|  | of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV); | 
|  |  | 
|  | of_node_put(twl6040_core_node); | 
|  |  | 
|  | if ((!info->vibldrv_res && !info->viblmotor_res) || | 
|  | (!info->vibrdrv_res && !info->vibrmotor_res)) { | 
|  | dev_err(info->dev, "invalid vibra driver/motor resistance\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | info->irq = platform_get_irq(pdev, 0); | 
|  | if (info->irq < 0) { | 
|  | dev_err(info->dev, "invalid irq\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, | 
|  | twl6040_vib_irq_handler, | 
|  | IRQF_ONESHOT, | 
|  | "twl6040_irq_vib", info); | 
|  | if (error) { | 
|  | dev_err(info->dev, "VIB IRQ request failed: %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | info->supplies[0].supply = "vddvibl"; | 
|  | info->supplies[1].supply = "vddvibr"; | 
|  | /* | 
|  | * When booted with Device tree the regulators are attached to the | 
|  | * parent device (twl6040 MFD core) | 
|  | */ | 
|  | error = devm_regulator_bulk_get(twl6040_core_dev, | 
|  | ARRAY_SIZE(info->supplies), | 
|  | info->supplies); | 
|  | if (error) { | 
|  | dev_err(info->dev, "couldn't get regulators %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (vddvibl_uV) { | 
|  | error = regulator_set_voltage(info->supplies[0].consumer, | 
|  | vddvibl_uV, vddvibl_uV); | 
|  | if (error) { | 
|  | dev_err(info->dev, "failed to set VDDVIBL volt %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (vddvibr_uV) { | 
|  | error = regulator_set_voltage(info->supplies[1].consumer, | 
|  | vddvibr_uV, vddvibr_uV); | 
|  | if (error) { | 
|  | dev_err(info->dev, "failed to set VDDVIBR volt %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | INIT_WORK(&info->play_work, vibra_play_work); | 
|  |  | 
|  | info->input_dev = devm_input_allocate_device(&pdev->dev); | 
|  | if (!info->input_dev) { | 
|  | dev_err(info->dev, "couldn't allocate input device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | input_set_drvdata(info->input_dev, info); | 
|  |  | 
|  | info->input_dev->name = "twl6040:vibrator"; | 
|  | info->input_dev->id.version = 1; | 
|  | info->input_dev->close = twl6040_vibra_close; | 
|  | __set_bit(FF_RUMBLE, info->input_dev->ffbit); | 
|  |  | 
|  | error = input_ff_create_memless(info->input_dev, NULL, vibra_play); | 
|  | if (error) { | 
|  | dev_err(info->dev, "couldn't register vibrator to FF\n"); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = input_register_device(info->input_dev); | 
|  | if (error) { | 
|  | dev_err(info->dev, "couldn't register input device\n"); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, info); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver twl6040_vibra_driver = { | 
|  | .probe		= twl6040_vibra_probe, | 
|  | .driver		= { | 
|  | .name	= "twl6040-vibra", | 
|  | .pm	= &twl6040_vibra_pm_ops, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(twl6040_vibra_driver); | 
|  |  | 
|  | MODULE_ALIAS("platform:twl6040-vibra"); | 
|  | MODULE_DESCRIPTION("TWL6040 Vibra driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); | 
|  | MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |