|  | /* | 
|  | * Freescale MXS On-Chip OTP driver | 
|  | * | 
|  | * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com> | 
|  | * | 
|  | * Based on the driver from Huang Shijie and Christoph G. Baumann | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | */ | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/nvmem-provider.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/stmp_device.h> | 
|  |  | 
|  | /* OCOTP registers and bits */ | 
|  |  | 
|  | #define BM_OCOTP_CTRL_RD_BANK_OPEN	BIT(12) | 
|  | #define BM_OCOTP_CTRL_ERROR		BIT(9) | 
|  | #define BM_OCOTP_CTRL_BUSY		BIT(8) | 
|  |  | 
|  | #define OCOTP_TIMEOUT		10000 | 
|  | #define OCOTP_DATA_OFFSET	0x20 | 
|  |  | 
|  | struct mxs_ocotp { | 
|  | struct clk *clk; | 
|  | void __iomem *base; | 
|  | struct nvmem_device *nvmem; | 
|  | }; | 
|  |  | 
|  | static int mxs_ocotp_wait(struct mxs_ocotp *otp) | 
|  | { | 
|  | int timeout = OCOTP_TIMEOUT; | 
|  | unsigned int status = 0; | 
|  |  | 
|  | while (timeout--) { | 
|  | status = readl(otp->base); | 
|  |  | 
|  | if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR))) | 
|  | break; | 
|  |  | 
|  | cpu_relax(); | 
|  | } | 
|  |  | 
|  | if (status & BM_OCOTP_CTRL_BUSY) | 
|  | return -EBUSY; | 
|  | else if (status & BM_OCOTP_CTRL_ERROR) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mxs_ocotp_read(void *context, unsigned int offset, | 
|  | void *val, size_t bytes) | 
|  | { | 
|  | struct mxs_ocotp *otp = context; | 
|  | u32 *buf = val; | 
|  | int ret; | 
|  |  | 
|  | ret = clk_enable(otp->clk); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR); | 
|  |  | 
|  | ret = mxs_ocotp_wait(otp); | 
|  | if (ret) | 
|  | goto disable_clk; | 
|  |  | 
|  | /* open OCOTP banks for read */ | 
|  | writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET); | 
|  |  | 
|  | /* approximately wait 33 hclk cycles */ | 
|  | udelay(1); | 
|  |  | 
|  | ret = mxs_ocotp_wait(otp); | 
|  | if (ret) | 
|  | goto close_banks; | 
|  |  | 
|  | while (bytes) { | 
|  | if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) { | 
|  | /* fill up non-data register */ | 
|  | *buf++ = 0; | 
|  | } else { | 
|  | *buf++ = readl(otp->base + offset); | 
|  | } | 
|  |  | 
|  | bytes -= 4; | 
|  | offset += 4; | 
|  | } | 
|  |  | 
|  | close_banks: | 
|  | /* close banks for power saving */ | 
|  | writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR); | 
|  |  | 
|  | disable_clk: | 
|  | clk_disable(otp->clk); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct nvmem_config ocotp_config = { | 
|  | .name = "mxs-ocotp", | 
|  | .stride = 16, | 
|  | .word_size = 4, | 
|  | .reg_read = mxs_ocotp_read, | 
|  | }; | 
|  |  | 
|  | struct mxs_data { | 
|  | int size; | 
|  | }; | 
|  |  | 
|  | static const struct mxs_data imx23_data = { | 
|  | .size = 0x220, | 
|  | }; | 
|  |  | 
|  | static const struct mxs_data imx28_data = { | 
|  | .size = 0x2a0, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id mxs_ocotp_match[] = { | 
|  | { .compatible = "fsl,imx23-ocotp", .data = &imx23_data }, | 
|  | { .compatible = "fsl,imx28-ocotp", .data = &imx28_data }, | 
|  | { /* sentinel */}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mxs_ocotp_match); | 
|  |  | 
|  | static int mxs_ocotp_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | const struct mxs_data *data; | 
|  | struct mxs_ocotp *otp; | 
|  | struct resource *res; | 
|  | const struct of_device_id *match; | 
|  | int ret; | 
|  |  | 
|  | match = of_match_device(dev->driver->of_match_table, dev); | 
|  | if (!match || !match->data) | 
|  | return -EINVAL; | 
|  |  | 
|  | otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL); | 
|  | if (!otp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | otp->base = devm_ioremap_resource(dev, res); | 
|  | if (IS_ERR(otp->base)) | 
|  | return PTR_ERR(otp->base); | 
|  |  | 
|  | otp->clk = devm_clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(otp->clk)) | 
|  | return PTR_ERR(otp->clk); | 
|  |  | 
|  | ret = clk_prepare(otp->clk); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to prepare clk: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | data = match->data; | 
|  |  | 
|  | ocotp_config.size = data->size; | 
|  | ocotp_config.priv = otp; | 
|  | ocotp_config.dev = dev; | 
|  | otp->nvmem = nvmem_register(&ocotp_config); | 
|  | if (IS_ERR(otp->nvmem)) { | 
|  | ret = PTR_ERR(otp->nvmem); | 
|  | goto err_clk; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, otp); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_clk: | 
|  | clk_unprepare(otp->clk); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mxs_ocotp_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct mxs_ocotp *otp = platform_get_drvdata(pdev); | 
|  |  | 
|  | clk_unprepare(otp->clk); | 
|  |  | 
|  | return nvmem_unregister(otp->nvmem); | 
|  | } | 
|  |  | 
|  | static struct platform_driver mxs_ocotp_driver = { | 
|  | .probe = mxs_ocotp_probe, | 
|  | .remove = mxs_ocotp_remove, | 
|  | .driver = { | 
|  | .name = "mxs-ocotp", | 
|  | .of_match_table = mxs_ocotp_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(mxs_ocotp_driver); | 
|  | MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>"); | 
|  | MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28"); | 
|  | MODULE_LICENSE("GPL v2"); |