|  | /* | 
|  | * Synopsys G210 Test Chip driver | 
|  | * | 
|  | * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) | 
|  | * | 
|  | * Authors: Joao Pinto <jpinto@synopsys.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include "ufshcd.h" | 
|  | #include "ufshcd-dwc.h" | 
|  | #include "tc-dwc-g210.h" | 
|  |  | 
|  | #include <linux/pci.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | /* Test Chip type expected values */ | 
|  | #define TC_G210_20BIT 20 | 
|  | #define TC_G210_40BIT 40 | 
|  | #define TC_G210_INV 0 | 
|  |  | 
|  | static int tc_type = TC_G210_INV; | 
|  | module_param(tc_type, int, 0); | 
|  | MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)"); | 
|  |  | 
|  | static int tc_dwc_g210_pci_suspend(struct device *dev) | 
|  | { | 
|  | return ufshcd_system_suspend(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | static int tc_dwc_g210_pci_resume(struct device *dev) | 
|  | { | 
|  | return ufshcd_system_resume(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | static int tc_dwc_g210_pci_runtime_suspend(struct device *dev) | 
|  | { | 
|  | return ufshcd_runtime_suspend(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | static int tc_dwc_g210_pci_runtime_resume(struct device *dev) | 
|  | { | 
|  | return ufshcd_runtime_resume(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | static int tc_dwc_g210_pci_runtime_idle(struct device *dev) | 
|  | { | 
|  | return ufshcd_runtime_idle(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * struct ufs_hba_dwc_vops - UFS DWC specific variant operations | 
|  | */ | 
|  | static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = { | 
|  | .name                   = "tc-dwc-g210-pci", | 
|  | .link_startup_notify	= ufshcd_dwc_link_startup_notify, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state | 
|  | * @pdev: pointer to PCI device handle | 
|  | */ | 
|  | static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space | 
|  | *		data structure memory | 
|  | * @pdev: pointer to PCI handle | 
|  | */ | 
|  | static void tc_dwc_g210_pci_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct ufs_hba *hba = pci_get_drvdata(pdev); | 
|  |  | 
|  | pm_runtime_forbid(&pdev->dev); | 
|  | pm_runtime_get_noresume(&pdev->dev); | 
|  | ufshcd_remove(hba); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tc_dwc_g210_pci_probe - probe routine of the driver | 
|  | * @pdev: pointer to PCI device handle | 
|  | * @id: PCI device id | 
|  | * | 
|  | * Returns 0 on success, non-zero value on failure | 
|  | */ | 
|  | static int | 
|  | tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | 
|  | { | 
|  | struct ufs_hba *hba; | 
|  | void __iomem *mmio_base; | 
|  | int err; | 
|  |  | 
|  | /* Check Test Chip type and set the specific setup routine */ | 
|  | if (tc_type == TC_G210_20BIT) { | 
|  | tc_dwc_g210_pci_hba_vops.phy_initialization = | 
|  | tc_dwc_g210_config_20_bit; | 
|  | } else if (tc_type == TC_G210_40BIT) { | 
|  | tc_dwc_g210_pci_hba_vops.phy_initialization = | 
|  | tc_dwc_g210_config_40_bit; | 
|  | } else { | 
|  | dev_err(&pdev->dev, "test chip version not specified\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | err = pcim_enable_device(pdev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "pcim_enable_device failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, "request and iomap failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | mmio_base = pcim_iomap_table(pdev)[0]; | 
|  |  | 
|  | err = ufshcd_alloc_host(&pdev->dev, &hba); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Allocation failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | hba->vops = &tc_dwc_g210_pci_hba_vops; | 
|  |  | 
|  | err = ufshcd_init(hba, mmio_base, pdev->irq); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Initialization failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, hba); | 
|  | pm_runtime_put_noidle(&pdev->dev); | 
|  | pm_runtime_allow(&pdev->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = { | 
|  | .suspend	= tc_dwc_g210_pci_suspend, | 
|  | .resume		= tc_dwc_g210_pci_resume, | 
|  | .runtime_suspend = tc_dwc_g210_pci_runtime_suspend, | 
|  | .runtime_resume  = tc_dwc_g210_pci_runtime_resume, | 
|  | .runtime_idle    = tc_dwc_g210_pci_runtime_idle, | 
|  | }; | 
|  |  | 
|  | static const struct pci_device_id tc_dwc_g210_pci_tbl[] = { | 
|  | { PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 
|  | { }	/* terminate list */ | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl); | 
|  |  | 
|  | static struct pci_driver tc_dwc_g210_pci_driver = { | 
|  | .name = "tc-dwc-g210-pci", | 
|  | .id_table = tc_dwc_g210_pci_tbl, | 
|  | .probe = tc_dwc_g210_pci_probe, | 
|  | .remove = tc_dwc_g210_pci_remove, | 
|  | .shutdown = tc_dwc_g210_pci_shutdown, | 
|  | .driver = { | 
|  | .pm = &tc_dwc_g210_pci_pm_ops | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_pci_driver(tc_dwc_g210_pci_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); | 
|  | MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver"); | 
|  | MODULE_LICENSE("Dual BSD/GPL"); |