|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver | 
|  | * Based on usb3503 driver | 
|  | * | 
|  | * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) | 
|  | * Copyright (c) 2016 Linaro Ltd. | 
|  | */ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  |  | 
|  | enum usb4604_mode { | 
|  | USB4604_MODE_UNKNOWN, | 
|  | USB4604_MODE_HUB, | 
|  | USB4604_MODE_STANDBY, | 
|  | }; | 
|  |  | 
|  | struct usb4604 { | 
|  | enum usb4604_mode	mode; | 
|  | struct device		*dev; | 
|  | struct gpio_desc	*gpio_reset; | 
|  | }; | 
|  |  | 
|  | static void usb4604_reset(struct usb4604 *hub, int state) | 
|  | { | 
|  | gpiod_set_value_cansleep(hub->gpio_reset, state); | 
|  |  | 
|  | /* Wait for i2c logic to come up */ | 
|  | if (state) | 
|  | msleep(250); | 
|  | } | 
|  |  | 
|  | static int usb4604_connect(struct usb4604 *hub) | 
|  | { | 
|  | struct device *dev = hub->dev; | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | int err; | 
|  | u8 connect_cmd[] = { 0xaa, 0x55, 0x00 }; | 
|  |  | 
|  | usb4604_reset(hub, 1); | 
|  |  | 
|  | err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd)); | 
|  | if (err < 0) { | 
|  | usb4604_reset(hub, 0); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | hub->mode = USB4604_MODE_HUB; | 
|  | dev_dbg(dev, "switched to HUB mode\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode) | 
|  | { | 
|  | struct device *dev = hub->dev; | 
|  | int err = 0; | 
|  |  | 
|  | switch (mode) { | 
|  | case USB4604_MODE_HUB: | 
|  | err = usb4604_connect(hub); | 
|  | break; | 
|  |  | 
|  | case USB4604_MODE_STANDBY: | 
|  | usb4604_reset(hub, 0); | 
|  | dev_dbg(dev, "switched to STANDBY mode\n"); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_err(dev, "unknown mode is requested\n"); | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int usb4604_probe(struct usb4604 *hub) | 
|  | { | 
|  | struct device *dev = hub->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  | struct gpio_desc *gpio; | 
|  | u32 mode = USB4604_MODE_HUB; | 
|  |  | 
|  | gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | 
|  | if (IS_ERR(gpio)) | 
|  | return PTR_ERR(gpio); | 
|  | hub->gpio_reset = gpio; | 
|  |  | 
|  | if (of_property_read_u32(np, "initial-mode", &hub->mode)) | 
|  | hub->mode = mode; | 
|  |  | 
|  | return usb4604_switch_mode(hub, hub->mode); | 
|  | } | 
|  |  | 
|  | static int usb4604_i2c_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct usb4604 *hub; | 
|  |  | 
|  | hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL); | 
|  | if (!hub) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(i2c, hub); | 
|  | hub->dev = &i2c->dev; | 
|  |  | 
|  | return usb4604_probe(hub); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int usb4604_i2c_suspend(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct usb4604 *hub = i2c_get_clientdata(client); | 
|  |  | 
|  | usb4604_switch_mode(hub, USB4604_MODE_STANDBY); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usb4604_i2c_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct usb4604 *hub = i2c_get_clientdata(client); | 
|  |  | 
|  | usb4604_switch_mode(hub, hub->mode); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend, | 
|  | usb4604_i2c_resume); | 
|  |  | 
|  | static const struct i2c_device_id usb4604_id[] = { | 
|  | { "usb4604", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, usb4604_id); | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id usb4604_of_match[] = { | 
|  | { .compatible = "smsc,usb4604" }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, usb4604_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver usb4604_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "usb4604", | 
|  | .pm = &usb4604_i2c_pm_ops, | 
|  | .of_match_table = of_match_ptr(usb4604_of_match), | 
|  | }, | 
|  | .probe		= usb4604_i2c_probe, | 
|  | .id_table	= usb4604_id, | 
|  | }; | 
|  | module_i2c_driver(usb4604_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("USB4604 USB HUB driver"); | 
|  | MODULE_LICENSE("GPL v2"); |