|  | /* | 
|  | * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver | 
|  | * | 
|  | * Copyright (C) Nokia Corporation | 
|  | * | 
|  | * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/slab.h> | 
|  | #include <sound/tpa6130a2-plat.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/tlv.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | #include "tpa6130a2.h" | 
|  |  | 
|  | enum tpa_model { | 
|  | TPA6130A2, | 
|  | TPA6140A2, | 
|  | }; | 
|  |  | 
|  | /* This struct is used to save the context */ | 
|  | struct tpa6130a2_data { | 
|  | struct device *dev; | 
|  | struct regmap *regmap; | 
|  | struct regulator *supply; | 
|  | int power_gpio; | 
|  | enum tpa_model id; | 
|  | }; | 
|  |  | 
|  | static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable) | 
|  | { | 
|  | int ret = 0, ret2; | 
|  |  | 
|  | if (enable) { | 
|  | ret = regulator_enable(data->supply); | 
|  | if (ret != 0) { | 
|  | dev_err(data->dev, | 
|  | "Failed to enable supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | /* Power on */ | 
|  | if (data->power_gpio >= 0) | 
|  | gpio_set_value(data->power_gpio, 1); | 
|  |  | 
|  | /* Sync registers */ | 
|  | regcache_cache_only(data->regmap, false); | 
|  | ret = regcache_sync(data->regmap); | 
|  | if (ret != 0) { | 
|  | dev_err(data->dev, | 
|  | "Failed to sync registers: %d\n", ret); | 
|  | regcache_cache_only(data->regmap, true); | 
|  | if (data->power_gpio >= 0) | 
|  | gpio_set_value(data->power_gpio, 0); | 
|  | ret2 = regulator_disable(data->supply); | 
|  | if (ret2 != 0) | 
|  | dev_err(data->dev, | 
|  | "Failed to disable supply: %d\n", ret2); | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | /* Powered off device does not retain registers. While device | 
|  | * is off, any register updates (i.e. volume changes) should | 
|  | * happen in cache only. | 
|  | */ | 
|  | regcache_mark_dirty(data->regmap); | 
|  | regcache_cache_only(data->regmap, true); | 
|  |  | 
|  | /* Power off */ | 
|  | if (data->power_gpio >= 0) | 
|  | gpio_set_value(data->power_gpio, 0); | 
|  |  | 
|  | ret = regulator_disable(data->supply); | 
|  | if (ret != 0) { | 
|  | dev_err(data->dev, | 
|  | "Failed to disable supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *kctrl, int event) | 
|  | { | 
|  | struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); | 
|  | struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c); | 
|  |  | 
|  | if (SND_SOC_DAPM_EVENT_ON(event)) { | 
|  | /* Before widget power up: turn chip on, sync registers */ | 
|  | return tpa6130a2_power(data, true); | 
|  | } else { | 
|  | /* After widget power down: turn chip off */ | 
|  | return tpa6130a2_power(data, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going | 
|  | * down in gain. | 
|  | */ | 
|  | static const DECLARE_TLV_DB_RANGE(tpa6130_tlv, | 
|  | 0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0), | 
|  | 2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0), | 
|  | 4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0), | 
|  | 6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0), | 
|  | 8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0), | 
|  | 10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0), | 
|  | 12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0), | 
|  | 14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0), | 
|  | 21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0), | 
|  | 38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0) | 
|  | ); | 
|  |  | 
|  | static const struct snd_kcontrol_new tpa6130a2_controls[] = { | 
|  | SOC_SINGLE_TLV("Headphone Playback Volume", | 
|  | TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0, | 
|  | tpa6130_tlv), | 
|  | }; | 
|  |  | 
|  | static const DECLARE_TLV_DB_RANGE(tpa6140_tlv, | 
|  | 0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0), | 
|  | 9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0), | 
|  | 17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0) | 
|  | ); | 
|  |  | 
|  | static const struct snd_kcontrol_new tpa6140a2_controls[] = { | 
|  | SOC_SINGLE_TLV("Headphone Playback Volume", | 
|  | TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0, | 
|  | tpa6140_tlv), | 
|  | }; | 
|  |  | 
|  | static int tpa6130a2_component_probe(struct snd_soc_component *component) | 
|  | { | 
|  | struct tpa6130a2_data *data = snd_soc_component_get_drvdata(component); | 
|  |  | 
|  | if (data->id == TPA6140A2) | 
|  | return snd_soc_add_component_controls(component, | 
|  | tpa6140a2_controls, ARRAY_SIZE(tpa6140a2_controls)); | 
|  | else | 
|  | return snd_soc_add_component_controls(component, | 
|  | tpa6130a2_controls, ARRAY_SIZE(tpa6130a2_controls)); | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_INPUT("LEFTIN"), | 
|  | SND_SOC_DAPM_INPUT("RIGHTIN"), | 
|  | SND_SOC_DAPM_OUTPUT("HPLEFT"), | 
|  | SND_SOC_DAPM_OUTPUT("HPRIGHT"), | 
|  |  | 
|  | SND_SOC_DAPM_PGA("Left Mute", TPA6130A2_REG_VOL_MUTE, | 
|  | TPA6130A2_HP_EN_L_SHIFT, 1, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Right Mute", TPA6130A2_REG_VOL_MUTE, | 
|  | TPA6130A2_HP_EN_R_SHIFT, 1, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Left PGA", TPA6130A2_REG_CONTROL, | 
|  | TPA6130A2_HP_EN_L_SHIFT, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Right PGA", TPA6130A2_REG_CONTROL, | 
|  | TPA6130A2_HP_EN_R_SHIFT, 0, NULL, 0), | 
|  |  | 
|  | SND_SOC_DAPM_SUPPLY("Power", TPA6130A2_REG_CONTROL, | 
|  | TPA6130A2_SWS_SHIFT, 1, tpa6130a2_power_event, | 
|  | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route tpa6130a2_dapm_routes[] = { | 
|  | { "Left PGA", NULL, "LEFTIN" }, | 
|  | { "Right PGA", NULL, "RIGHTIN" }, | 
|  |  | 
|  | { "Left Mute", NULL, "Left PGA" }, | 
|  | { "Right Mute", NULL, "Right PGA" }, | 
|  |  | 
|  | { "HPLEFT", NULL, "Left Mute" }, | 
|  | { "HPRIGHT", NULL, "Right Mute" }, | 
|  |  | 
|  | { "Left PGA", NULL, "Power" }, | 
|  | { "Right PGA", NULL, "Power" }, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_component_driver tpa6130a2_component_driver = { | 
|  | .name = "tpa6130a2", | 
|  | .probe = tpa6130a2_component_probe, | 
|  | .dapm_widgets = tpa6130a2_dapm_widgets, | 
|  | .num_dapm_widgets = ARRAY_SIZE(tpa6130a2_dapm_widgets), | 
|  | .dapm_routes = tpa6130a2_dapm_routes, | 
|  | .num_dapm_routes = ARRAY_SIZE(tpa6130a2_dapm_routes), | 
|  | }; | 
|  |  | 
|  | static const struct reg_default tpa6130a2_reg_defaults[] = { | 
|  | { TPA6130A2_REG_CONTROL, TPA6130A2_SWS }, | 
|  | { TPA6130A2_REG_VOL_MUTE, TPA6130A2_MUTE_R | TPA6130A2_MUTE_L }, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config tpa6130a2_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = TPA6130A2_REG_VERSION, | 
|  | .reg_defaults = tpa6130a2_reg_defaults, | 
|  | .num_reg_defaults = ARRAY_SIZE(tpa6130a2_reg_defaults), | 
|  | .cache_type = REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static int tpa6130a2_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct device *dev; | 
|  | struct tpa6130a2_data *data; | 
|  | struct tpa6130a2_platform_data *pdata = client->dev.platform_data; | 
|  | struct device_node *np = client->dev.of_node; | 
|  | const char *regulator; | 
|  | unsigned int version; | 
|  | int ret; | 
|  |  | 
|  | dev = &client->dev; | 
|  |  | 
|  | data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data->dev = dev; | 
|  |  | 
|  | data->regmap = devm_regmap_init_i2c(client, &tpa6130a2_regmap_config); | 
|  | if (IS_ERR(data->regmap)) | 
|  | return PTR_ERR(data->regmap); | 
|  |  | 
|  | if (pdata) { | 
|  | data->power_gpio = pdata->power_gpio; | 
|  | } else if (np) { | 
|  | data->power_gpio = of_get_named_gpio(np, "power-gpio", 0); | 
|  | } else { | 
|  | dev_err(dev, "Platform data not set\n"); | 
|  | dump_stack(); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | i2c_set_clientdata(client, data); | 
|  |  | 
|  | data->id = id->driver_data; | 
|  |  | 
|  | if (data->power_gpio >= 0) { | 
|  | ret = devm_gpio_request(dev, data->power_gpio, | 
|  | "tpa6130a2 enable"); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "Failed to request power GPIO (%d)\n", | 
|  | data->power_gpio); | 
|  | return ret; | 
|  | } | 
|  | gpio_direction_output(data->power_gpio, 0); | 
|  | } | 
|  |  | 
|  | switch (data->id) { | 
|  | default: | 
|  | dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n", | 
|  | data->id); | 
|  | /* fall through */ | 
|  | case TPA6130A2: | 
|  | regulator = "Vdd"; | 
|  | break; | 
|  | case TPA6140A2: | 
|  | regulator = "AVdd"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | data->supply = devm_regulator_get(dev, regulator); | 
|  | if (IS_ERR(data->supply)) { | 
|  | ret = PTR_ERR(data->supply); | 
|  | dev_err(dev, "Failed to request supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = tpa6130a2_power(data, true); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  |  | 
|  | /* Read version */ | 
|  | regmap_read(data->regmap, TPA6130A2_REG_VERSION, &version); | 
|  | version &= TPA6130A2_VERSION_MASK; | 
|  | if ((version != 1) && (version != 2)) | 
|  | dev_warn(dev, "UNTESTED version detected (%d)\n", version); | 
|  |  | 
|  | /* Disable the chip */ | 
|  | ret = tpa6130a2_power(data, false); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | return devm_snd_soc_register_component(&client->dev, | 
|  | &tpa6130a2_component_driver, NULL, 0); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id tpa6130a2_id[] = { | 
|  | { "tpa6130a2", TPA6130A2 }, | 
|  | { "tpa6140a2", TPA6140A2 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, tpa6130a2_id); | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_OF) | 
|  | static const struct of_device_id tpa6130a2_of_match[] = { | 
|  | { .compatible = "ti,tpa6130a2", }, | 
|  | { .compatible = "ti,tpa6140a2" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, tpa6130a2_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver tpa6130a2_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "tpa6130a2", | 
|  | .of_match_table = of_match_ptr(tpa6130a2_of_match), | 
|  | }, | 
|  | .probe = tpa6130a2_probe, | 
|  | .id_table = tpa6130a2_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(tpa6130a2_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); | 
|  | MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver"); | 
|  | MODULE_LICENSE("GPL"); |