[Bugfix][API-907]add WPA3 option into defconfig&update nl80211.h for wifi WPA3
Change-Id: Ieea4041b3a1e9518767d67d6c2c7a3fa4c0eebae
diff --git a/src/kernel/linux/v4.19/arch/arm64/configs/auto2735evb_defconfig b/src/kernel/linux/v4.19/arch/arm64/configs/auto2735evb_defconfig
index bb4f42a..4f080c8 100644
--- a/src/kernel/linux/v4.19/arch/arm64/configs/auto2735evb_defconfig
+++ b/src/kernel/linux/v4.19/arch/arm64/configs/auto2735evb_defconfig
@@ -67,6 +67,7 @@
CONFIG_BCMDHD=m
CONFIG_CYW89570=y
CONFIG_RFKILL=y
+CONFIG_BCMDHD_WPA3=y
#tianyan@2021.10.15 modify for open wifi6 module end
#tianyan@2021.10.15 modify for open wifi5 module start
CONFIG_WLAN=y
diff --git a/src/kernel/linux/v4.19/include/uapi/linux/nl80211.h b/src/kernel/linux/v4.19/include/uapi/linux/nl80211.h
old mode 100644
new mode 100755
index 8d2479c..1e47749
--- a/src/kernel/linux/v4.19/include/uapi/linux/nl80211.h
+++ b/src/kernel/linux/v4.19/include/uapi/linux/nl80211.h
@@ -2250,6 +2250,135 @@
* association request when used with NL80211_CMD_NEW_STATION). Can be set
* only if %NL80211_STA_FLAG_WME is set.
*
+ * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
+ * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
+ * measurement (FTM) responder functionality and containing parameters as
+ * possible, see &enum nl80211_ftm_responder_attr
+ *
+ * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
+ * statistics, see &enum nl80211_ftm_responder_stats.
+ *
+ * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
+ * if the attribute is not given no timeout is requested. Note that 0 is an
+ * invalid value.
+ *
+ * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
+ * data, uses nested attributes specified in
+ * &enum nl80211_peer_measurement_attrs.
+ * This is also used for capability advertisement in the wiphy information,
+ * with the appropriate sub-attributes.
+ *
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
+ * scheduler.
+ *
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
+ * station associated with the AP. See &enum nl80211_tx_power_setting for
+ * possible values.
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
+ * allows to set Tx power for a station. If this attribute is not included,
+ * the default per-interface tx power setting will be overriding. Driver
+ * should be picking up the lowest tx power, either tx power per-interface
+ * or per-station.
+ *
+ * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
+ * is used with %NL80211_CMD_CONNECT to provide password for offloading
+ * SAE authentication for WPA3-Personal networks.
+ *
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
+ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ * channel(s) that are allowed to be used for EDMG transmissions.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
+ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ * the allowed channel bandwidth configurations. (u8 attribute)
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ *
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
+ * (u16).
+ *
+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
+ *
+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
+ * using attributes from &enum nl80211_iftype_akm_attributes. This
+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
+ * supported AKM suites capability per interface. AKMs advertised in
+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
+ * advertised for a specific interface type.
+ *
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
+ * on output (in wiphy attributes) it contains only the feature sub-
+ * attributes.
+ *
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
+ * port in order to forward/receive them as ordinary data frames.
+ *
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA.
+ * Drivers that trigger roaming need to know the lifetime of the
+ * configured PMKSA for triggering the full vs. PMKSA caching based
+ * authentication. This timeout helps authentication methods like SAE,
+ * where PMK gets updated only by going through a full (new SAE)
+ * authentication instead of getting updated during an association for EAP
+ * authentication. No new full authentication within the PMK expiry shall
+ * result in a disassociation at the end of the lifetime.
+ *
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME
+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
+ * driver to trigger a full authentication roam (without PMKSA caching)
+ * after the reauthentication threshold time, but before the PMK lifetime
+ * has expired.
+ *
+ * Authentication methods like SAE need to be able to generate a new PMKSA
+ * entry without having to force a disconnection after the PMK timeout. If
+ * no roaming occurs between the reauth threshold and PMK expiration,
+ * disassociation is still forced.
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
+ * %NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
+ *
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ * association request when used with NL80211_CMD_NEW_STATION).
+ *
+ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
+ * discovery. It is a nested attribute, see
+ * &enum nl80211_fils_discovery_attributes.
+ *
+ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
+ * unsolicited broadcast probe response. It is a nested attribute, see
+ * &enum nl80211_unsol_bcast_probe_resp_attributes.
+ *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
+ * derivation in WPA3-Personal networks which are using SAE authentication.
+ * This is a u8 attribute that encapsulates one of the values from
+ * &enum nl80211_sae_pwe_mechanism.
+ *
+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
+ * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
+ * of %nl80211_sar_attrs which specifies the sar type and related
+ * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
+ *
+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
+ * disassoc events to indicate that an immediate reconnect to the AP
+ * is desired.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2691,10 +2820,65 @@
NL80211_ATTR_HE_CAPABILITY,
+ NL80211_ATTR_FTM_RESPONDER,
+
+ NL80211_ATTR_FTM_RESPONDER_STATS,
+
+ NL80211_ATTR_TIMEOUT,
+
+ NL80211_ATTR_PEER_MEASUREMENTS,
+
+ NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_STA_TX_POWER_SETTING,
+ NL80211_ATTR_STA_TX_POWER,
+
+
//tianyan@2021.7.27 modify for add wifi6 module start
NL80211_ATTR_SAE_PASSWORD,
//tianyan@2021.7.27 modify for add wifi6 module end
+ NL80211_ATTR_TWT_RESPONDER,
+
+ NL80211_ATTR_HE_OBSS_PD,
+
+ NL80211_ATTR_WIPHY_EDMG_CHANNELS,
+ NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+
+ NL80211_ATTR_VLAN_ID,
+
+ NL80211_ATTR_HE_BSS_COLOR,
+
+ NL80211_ATTR_IFTYPE_AKM_SUITES,
+
+ NL80211_ATTR_TID_CONFIG,
+
+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
+
+ NL80211_ATTR_PMK_LIFETIME,
+ NL80211_ATTR_PMK_REAUTH_THRESHOLD,
+
+ NL80211_ATTR_RECEIVE_MULTICAST,
+ NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ NL80211_ATTR_CENTER_FREQ1_OFFSET,
+ NL80211_ATTR_SCAN_FREQ_KHZ,
+
+ NL80211_ATTR_HE_6GHZ_CAPABILITY,
+
+ NL80211_ATTR_FILS_DISCOVERY,
+
+ NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
+
+ NL80211_ATTR_S1G_CAPABILITY,
+ NL80211_ATTR_S1G_CAPABILITY_MASK,
+
+ NL80211_ATTR_SAE_PWE,
+
+ NL80211_ATTR_RECONNECT_REQUESTED,
+
+ NL80211_ATTR_SAR_SPEC,
+
+ NL80211_ATTR_DISABLE_HE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -5239,6 +5423,93 @@
* @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
* except for supported rates from the probe request content if requested
* by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
+ * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
+ * timing measurement responder role.
+ *
+ * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
+ * able to rekey an in-use key correctly. Userspace must not rekey PTK keys
+ * if this flag is not set. Ignoring this can leak clear text packets and/or
+ * freeze the connection.
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
+ * Individually Addressed Frames" from IEEE802.11-2016.
+ *
+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
+ * fairness for transmitted packets and has enabled airtime fairness
+ * scheduling.
+ *
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
+ * (set/del PMKSA operations) in AP mode.
+ *
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+ * filtering of sched scan results using band specific RSSI thresholds.
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ * to a station.
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
+ * station mode (SAE password is passed as part of the connect command).
+ *
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
+ * with VLAN tagged frames and separate VLAN-specific netdevs added using
+ * vconfig similarly to the Ethernet case.
+ *
+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
+ * feature, which prevents bufferbloat by using the expected transmission
+ * time to limit the amount of data buffered in the hardware.
+ *
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
+ * and can receive key configuration for BIGTK using key indexes 6 and 7.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
+ * protection as a client only and cannot transmit protected beacons.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
+ * forwarding of preauth frames over the control port. They are then
+ * handled as ordinary data frames.
+ *
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
+ *
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
+ * in IBSS mode, essentially by dropping their state.
+ *
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
+ * are possible for multicast frames and those will be reported properly.
+ *
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ * included in the scan request.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
+ * can report tx status for control port over nl80211 tx operations.
+ *
+ * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
+ * Channel Validation (OCV) when using driver's SME for RSNA handshakes.
+ *
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
+ * handshake with PSK in AP mode (PSK is passed as part of the start AP
+ * command).
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
+ * in AP mode (SAE password is passed as part of the start AP command).
+ *
+ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
+ * frames transmission
+ *
+ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+ * unsolicited broadcast probe response transmission
+ *
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
+ * configuration (AP/mesh) with HE rates.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
+ * frame protection for all management frames exchanged during the
+ * negotiation and range measurement procedure.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5271,15 +5542,42 @@
NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
NL80211_EXT_FEATURE_DFS_OFFLOAD,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
- NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
+ NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+ /* we renamed this - stay compatible */
+ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
NL80211_EXT_FEATURE_TXQS,
NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+ NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
+ NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+ NL80211_EXT_FEATURE_EXT_KEY_ID,
+ NL80211_EXT_FEATURE_STA_TX_PWR,
//tianyan@2021.7.27 modify for add wifi6 module start
NL80211_EXT_FEATURE_SAE_OFFLOAD,
- NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
//tianyan@2021.7.27 modify for add wifi6 module end
+ NL80211_EXT_FEATURE_VLAN_OFFLOAD,
+ NL80211_EXT_FEATURE_AQL,
+ NL80211_EXT_FEATURE_BEACON_PROTECTION,
+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
+ NL80211_EXT_FEATURE_PROTECTED_TWT,
+ NL80211_EXT_FEATURE_DEL_IBSS_STA,
+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
+ NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
+ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+ NL80211_EXT_FEATURE_BEACON_RATE_HE,
+ NL80211_EXT_FEATURE_SECURE_LTF,
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -5531,6 +5829,10 @@
* Used by cfg80211_rx_mgmt()
*
* @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
+ * the authentication. Exclusively defined for host drivers that
+ * advertises the SME functionality but would like the userspace
+ * to handle certain authentication algorithms (e.g. SAE).
*/
enum nl80211_rxmgmt_flags {
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,