|  | /* | 
|  | * pci.c -- basic PCI support code | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  | /* | 
|  | * From arch/i386/kernel/pci-i386.c: | 
|  | * | 
|  | * We need to avoid collisions with `mirrored' VGA ports | 
|  | * and other strange ISA hardware, so we always want the | 
|  | * addresses to be allocated in the 0x000-0x0ff region | 
|  | * modulo 0x400. | 
|  | * | 
|  | * Why? Because some silly external IO cards only decode | 
|  | * the low 10 bits of the IO address. The 0x00-0xff region | 
|  | * is reserved for motherboard devices that decode all 16 | 
|  | * bits, so it's ok to allocate at, say, 0x2800-0x28ff, | 
|  | * but we want to try to avoid allocating at 0x2900-0x2bff | 
|  | * which might be mirrored at 0x0100-0x03ff.. | 
|  | */ | 
|  | resource_size_t pcibios_align_resource(void *data, const struct resource *res, | 
|  | resource_size_t size, resource_size_t align) | 
|  | { | 
|  | resource_size_t start = res->start; | 
|  |  | 
|  | if ((res->flags & IORESOURCE_IO) && (start & 0x300)) | 
|  | start = (start + 0x3ff) & ~0x3ff; | 
|  |  | 
|  | start = (start + align - 1) & ~(align - 1); | 
|  |  | 
|  | return start; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is taken from the ARM code for this. | 
|  | */ | 
|  | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
|  | { | 
|  | struct resource *r; | 
|  | u16 cmd, newcmd; | 
|  | int idx; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | newcmd = cmd; | 
|  |  | 
|  | for (idx = 0; idx < 6; idx++) { | 
|  | /* Only set up the requested stuff */ | 
|  | if (!(mask & (1 << idx))) | 
|  | continue; | 
|  |  | 
|  | r = dev->resource + idx; | 
|  | if (!r->start && r->end) { | 
|  | pr_err("PCI: Device %s not available because of resource collisions\n", | 
|  | pci_name(dev)); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | newcmd |= PCI_COMMAND_IO; | 
|  | if (r->flags & IORESOURCE_MEM) | 
|  | newcmd |= PCI_COMMAND_MEMORY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bridges (eg, cardbus bridges) need to be fully enabled | 
|  | */ | 
|  | if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) | 
|  | newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; | 
|  |  | 
|  |  | 
|  | if (newcmd != cmd) { | 
|  | pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n", | 
|  | pci_name(dev), cmd, newcmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, newcmd); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void pcibios_fixup_bus(struct pci_bus *bus) | 
|  | { | 
|  | struct pci_dev *dev; | 
|  |  | 
|  | list_for_each_entry(dev, &bus->devices, bus_list) { | 
|  | pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8); | 
|  | pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32); | 
|  | } | 
|  | } | 
|  |  | 
|  | char *pcibios_setup(char *str) | 
|  | { | 
|  | return str; | 
|  | } | 
|  |  |