| /* | 
 |  * Linux ARCnet driver - COM20020 PCI support | 
 |  * Contemporary Controls PCI20 and SOHARD SH-ARC PCI | 
 |  * | 
 |  * Written 1994-1999 by Avery Pennarun, | 
 |  *    based on an ISA version by David Woodhouse. | 
 |  * Written 1999-2000 by Martin Mares <mj@ucw.cz>. | 
 |  * Derived from skeleton.c by Donald Becker. | 
 |  * | 
 |  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) | 
 |  *  for sponsoring the further development of this driver. | 
 |  * | 
 |  * ********************** | 
 |  * | 
 |  * The original copyright of skeleton.c was as follows: | 
 |  * | 
 |  * skeleton.c Written 1993 by Donald Becker. | 
 |  * Copyright 1993 United States Government as represented by the | 
 |  * Director, National Security Agency.  This software may only be used | 
 |  * and distributed according to the terms of the GNU General Public License as | 
 |  * modified by SRC, incorporated herein by reference. | 
 |  * | 
 |  * ********************** | 
 |  * | 
 |  * For more details, see drivers/net/arcnet.c | 
 |  * | 
 |  * ********************** | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/types.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/list.h> | 
 | #include <linux/io.h> | 
 | #include <linux/leds.h> | 
 |  | 
 | #include "arcdevice.h" | 
 | #include "com20020.h" | 
 |  | 
 | /* Module parameters */ | 
 |  | 
 | static int node; | 
 | static char device[9];		/* use eg. device="arc1" to change name */ | 
 | static int timeout = 3; | 
 | static int backplane; | 
 | static int clockp; | 
 | static int clockm; | 
 |  | 
 | module_param(node, int, 0); | 
 | module_param_string(device, device, sizeof(device), 0); | 
 | module_param(timeout, int, 0); | 
 | module_param(backplane, int, 0); | 
 | module_param(clockp, int, 0); | 
 | module_param(clockm, int, 0); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | static void led_tx_set(struct led_classdev *led_cdev, | 
 | 			     enum led_brightness value) | 
 | { | 
 | 	struct com20020_dev *card; | 
 | 	struct com20020_priv *priv; | 
 | 	struct com20020_pci_card_info *ci; | 
 |  | 
 | 	card = container_of(led_cdev, struct com20020_dev, tx_led); | 
 |  | 
 | 	priv = card->pci_priv; | 
 | 	ci = priv->ci; | 
 |  | 
 | 	outb(!!value, priv->misc + ci->leds[card->index].green); | 
 | } | 
 |  | 
 | static void led_recon_set(struct led_classdev *led_cdev, | 
 | 			     enum led_brightness value) | 
 | { | 
 | 	struct com20020_dev *card; | 
 | 	struct com20020_priv *priv; | 
 | 	struct com20020_pci_card_info *ci; | 
 |  | 
 | 	card = container_of(led_cdev, struct com20020_dev, recon_led); | 
 |  | 
 | 	priv = card->pci_priv; | 
 | 	ci = priv->ci; | 
 |  | 
 | 	outb(!!value, priv->misc + ci->leds[card->index].red); | 
 | } | 
 |  | 
 | static ssize_t backplane_mode_show(struct device *dev, | 
 | 				   struct device_attribute *attr, | 
 | 				   char *buf) | 
 | { | 
 | 	struct net_device *net_dev = to_net_dev(dev); | 
 | 	struct arcnet_local *lp = netdev_priv(net_dev); | 
 |  | 
 | 	return sprintf(buf, "%s\n", lp->backplane ? "true" : "false"); | 
 | } | 
 | static DEVICE_ATTR_RO(backplane_mode); | 
 |  | 
 | static struct attribute *com20020_state_attrs[] = { | 
 | 	&dev_attr_backplane_mode.attr, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static const struct attribute_group com20020_state_group = { | 
 | 	.name = NULL, | 
 | 	.attrs = com20020_state_attrs, | 
 | }; | 
 |  | 
 | static void com20020pci_remove(struct pci_dev *pdev); | 
 |  | 
 | static int com20020pci_probe(struct pci_dev *pdev, | 
 | 			     const struct pci_device_id *id) | 
 | { | 
 | 	struct com20020_pci_card_info *ci; | 
 | 	struct com20020_pci_channel_map *mm; | 
 | 	struct net_device *dev; | 
 | 	struct arcnet_local *lp; | 
 | 	struct com20020_priv *priv; | 
 | 	int i, ioaddr, ret; | 
 | 	struct resource *r; | 
 |  | 
 | 	if (pci_enable_device(pdev)) | 
 | 		return -EIO; | 
 |  | 
 | 	priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv), | 
 | 			    GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ci = (struct com20020_pci_card_info *)id->driver_data; | 
 | 	priv->ci = ci; | 
 | 	mm = &ci->misc_map; | 
 |  | 
 | 	INIT_LIST_HEAD(&priv->list_dev); | 
 |  | 
 | 	if (mm->size) { | 
 | 		ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset; | 
 | 		r = devm_request_region(&pdev->dev, ioaddr, mm->size, | 
 | 					"com20020-pci"); | 
 | 		if (!r) { | 
 | 			pr_err("IO region %xh-%xh already allocated.\n", | 
 | 			       ioaddr, ioaddr + mm->size - 1); | 
 | 			return -EBUSY; | 
 | 		} | 
 | 		priv->misc = ioaddr; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ci->devcount; i++) { | 
 | 		struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; | 
 | 		struct com20020_dev *card; | 
 | 		int dev_id_mask = 0xf; | 
 |  | 
 | 		dev = alloc_arcdev(device); | 
 | 		if (!dev) { | 
 | 			ret = -ENOMEM; | 
 | 			goto out_port; | 
 | 		} | 
 | 		dev->dev_port = i; | 
 |  | 
 | 		dev->netdev_ops = &com20020_netdev_ops; | 
 |  | 
 | 		lp = netdev_priv(dev); | 
 |  | 
 | 		arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name); | 
 | 		ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset; | 
 |  | 
 | 		r = devm_request_region(&pdev->dev, ioaddr, cm->size, | 
 | 					"com20020-pci"); | 
 | 		if (!r) { | 
 | 			pr_err("IO region %xh-%xh already allocated\n", | 
 | 			       ioaddr, ioaddr + cm->size - 1); | 
 | 			ret = -EBUSY; | 
 | 			goto out_port; | 
 | 		} | 
 |  | 
 | 		/* Dummy access after Reset | 
 | 		 * ARCNET controller needs | 
 | 		 * this access to detect bustype | 
 | 		 */ | 
 | 		arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); | 
 | 		arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); | 
 |  | 
 | 		SET_NETDEV_DEV(dev, &pdev->dev); | 
 | 		dev->base_addr = ioaddr; | 
 | 		dev->dev_addr[0] = node; | 
 | 		dev->sysfs_groups[0] = &com20020_state_group; | 
 | 		dev->irq = pdev->irq; | 
 | 		lp->card_name = "PCI COM20020"; | 
 | 		lp->card_flags = ci->flags; | 
 | 		lp->backplane = backplane; | 
 | 		lp->clockp = clockp & 7; | 
 | 		lp->clockm = clockm & 3; | 
 | 		lp->timeout = timeout; | 
 | 		lp->hw.owner = THIS_MODULE; | 
 |  | 
 | 		lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1; | 
 |  | 
 | 		if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) | 
 | 			lp->backplane = 1; | 
 |  | 
 | 		/* Get the dev_id from the PLX rotary coder */ | 
 | 		if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) | 
 | 			dev_id_mask = 0x3; | 
 | 		dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; | 
 |  | 
 | 		snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); | 
 |  | 
 | 		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { | 
 | 			pr_err("IO address %Xh is empty!\n", ioaddr); | 
 | 			ret = -EIO; | 
 | 			goto out_port; | 
 | 		} | 
 | 		if (com20020_check(dev)) { | 
 | 			ret = -EIO; | 
 | 			goto out_port; | 
 | 		} | 
 |  | 
 | 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), | 
 | 				    GFP_KERNEL); | 
 | 		if (!card) { | 
 | 			ret = -ENOMEM; | 
 | 			goto out_port; | 
 | 		} | 
 |  | 
 | 		card->index = i; | 
 | 		card->pci_priv = priv; | 
 | 		card->tx_led.brightness_set = led_tx_set; | 
 | 		card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, | 
 | 						GFP_KERNEL, "arc%d-%d-tx", | 
 | 						dev->dev_id, i); | 
 | 		card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, | 
 | 						"pci:green:tx:%d-%d", | 
 | 						dev->dev_id, i); | 
 |  | 
 | 		card->tx_led.dev = &dev->dev; | 
 | 		card->recon_led.brightness_set = led_recon_set; | 
 | 		card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, | 
 | 						GFP_KERNEL, "arc%d-%d-recon", | 
 | 						dev->dev_id, i); | 
 | 		card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, | 
 | 						"pci:red:recon:%d-%d", | 
 | 						dev->dev_id, i); | 
 | 		card->recon_led.dev = &dev->dev; | 
 | 		card->dev = dev; | 
 |  | 
 | 		ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); | 
 | 		if (ret) | 
 | 			goto out_port; | 
 |  | 
 | 		ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); | 
 | 		if (ret) | 
 | 			goto out_port; | 
 |  | 
 | 		dev_set_drvdata(&dev->dev, card); | 
 |  | 
 | 		ret = com20020_found(dev, IRQF_SHARED); | 
 | 		if (ret) | 
 | 			goto out_port; | 
 |  | 
 | 		devm_arcnet_led_init(dev, dev->dev_id, i); | 
 |  | 
 | 		list_add(&card->list, &priv->list_dev); | 
 | 	} | 
 |  | 
 | 	pci_set_drvdata(pdev, priv); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_port: | 
 | 	com20020pci_remove(pdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void com20020pci_remove(struct pci_dev *pdev) | 
 | { | 
 | 	struct com20020_dev *card, *tmpcard; | 
 | 	struct com20020_priv *priv; | 
 |  | 
 | 	priv = pci_get_drvdata(pdev); | 
 |  | 
 | 	list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) { | 
 | 		struct net_device *dev = card->dev; | 
 |  | 
 | 		unregister_netdev(dev); | 
 | 		free_irq(dev->irq, dev); | 
 | 		free_netdev(dev); | 
 | 	} | 
 | } | 
 |  | 
 | static struct com20020_pci_card_info card_info_10mbit = { | 
 | 	.name = "ARC-PCI", | 
 | 	.devcount = 1, | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 2, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08, | 
 | 		}, | 
 | 	}, | 
 | 	.flags = ARC_CAN_10MBIT, | 
 | }; | 
 |  | 
 | static struct com20020_pci_card_info card_info_5mbit = { | 
 | 	.name = "ARC-PCI", | 
 | 	.devcount = 1, | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 2, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08, | 
 | 		}, | 
 | 	}, | 
 | 	.flags = ARC_IS_5MBIT, | 
 | }; | 
 |  | 
 | static struct com20020_pci_card_info card_info_sohard = { | 
 | 	.name = "PLX-PCI", | 
 | 	.devcount = 1, | 
 | 	/* SOHARD needs PCI base addr 4 */ | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 4, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08 | 
 | 		}, | 
 | 	}, | 
 | 	.flags = ARC_CAN_10MBIT, | 
 | }; | 
 |  | 
 | static struct com20020_pci_card_info card_info_eae_arc1 = { | 
 | 	.name = "EAE PLX-PCI ARC1", | 
 | 	.devcount = 1, | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 2, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08, | 
 | 		}, | 
 | 	}, | 
 | 	.misc_map = { | 
 | 		.bar = 2, | 
 | 		.offset = 0x10, | 
 | 		.size = 0x04, | 
 | 	}, | 
 | 	.leds = { | 
 | 		{ | 
 | 			.green = 0x0, | 
 | 			.red = 0x1, | 
 | 		}, | 
 | 	}, | 
 | 	.rotary = 0x0, | 
 | 	.flags = ARC_CAN_10MBIT, | 
 | }; | 
 |  | 
 | static struct com20020_pci_card_info card_info_eae_ma1 = { | 
 | 	.name = "EAE PLX-PCI MA1", | 
 | 	.devcount = 2, | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 2, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08, | 
 | 		}, { | 
 | 			.bar = 2, | 
 | 			.offset = 0x08, | 
 | 			.size = 0x08, | 
 | 		} | 
 | 	}, | 
 | 	.misc_map = { | 
 | 		.bar = 2, | 
 | 		.offset = 0x10, | 
 | 		.size = 0x04, | 
 | 	}, | 
 | 	.leds = { | 
 | 		{ | 
 | 			.green = 0x0, | 
 | 			.red = 0x1, | 
 | 		}, { | 
 | 			.green = 0x2, | 
 | 			.red = 0x3, | 
 | 		}, | 
 | 	}, | 
 | 	.rotary = 0x0, | 
 | 	.flags = ARC_CAN_10MBIT, | 
 | }; | 
 |  | 
 | static struct com20020_pci_card_info card_info_eae_fb2 = { | 
 | 	.name = "EAE PLX-PCI FB2", | 
 | 	.devcount = 1, | 
 | 	.chan_map_tbl = { | 
 | 		{ | 
 | 			.bar = 2, | 
 | 			.offset = 0x00, | 
 | 			.size = 0x08, | 
 | 		}, | 
 | 	}, | 
 | 	.misc_map = { | 
 | 		.bar = 2, | 
 | 		.offset = 0x10, | 
 | 		.size = 0x04, | 
 | 	}, | 
 | 	.leds = { | 
 | 		{ | 
 | 			.green = 0x0, | 
 | 			.red = 0x1, | 
 | 		}, | 
 | 	}, | 
 | 	.rotary = 0x0, | 
 | 	.flags = ARC_CAN_10MBIT, | 
 | }; | 
 |  | 
 | static const struct pci_device_id com20020pci_id_table[] = { | 
 | 	{ | 
 | 		0x1571, 0xa001, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0, | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa002, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0, | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa003, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0 | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa004, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0, | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa005, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0 | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa006, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0 | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa007, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0 | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa008, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		0 | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa009, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa00a, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa00b, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa00c, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa00d, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa00e, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_5mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa201, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa202, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa203, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa204, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa205, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x1571, 0xa206, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x9030, | 
 | 		0x10B5, 0x2978, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_sohard | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x9050, | 
 | 		0x10B5, 0x2273, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_sohard | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x9050, | 
 | 		0x10B5, 0x3263, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_eae_arc1 | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x9050, | 
 | 		0x10B5, 0x3292, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_eae_ma1 | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x9050, | 
 | 		0x10B5, 0x3294, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_eae_fb2 | 
 | 	}, | 
 | 	{ | 
 | 		0x14BA, 0x6000, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ | 
 | 		0x10B5, 0x2200, | 
 | 		PCI_ANY_ID, PCI_ANY_ID, | 
 | 		0, 0, | 
 | 		(kernel_ulong_t)&card_info_10mbit | 
 | 	}, | 
 | 	{ 0, } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, com20020pci_id_table); | 
 |  | 
 | static struct pci_driver com20020pci_driver = { | 
 | 	.name		= "com20020", | 
 | 	.id_table	= com20020pci_id_table, | 
 | 	.probe		= com20020pci_probe, | 
 | 	.remove		= com20020pci_remove, | 
 | }; | 
 |  | 
 | static int __init com20020pci_init(void) | 
 | { | 
 | 	if (BUGLVL(D_NORMAL)) | 
 | 		pr_info("%s\n", "COM20020 PCI support"); | 
 | 	return pci_register_driver(&com20020pci_driver); | 
 | } | 
 |  | 
 | static void __exit com20020pci_cleanup(void) | 
 | { | 
 | 	pci_unregister_driver(&com20020pci_driver); | 
 | } | 
 |  | 
 | module_init(com20020pci_init) | 
 | module_exit(com20020pci_cleanup) |