| /* | 
 |  * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #ifndef __W1_NETLINK_H | 
 | #define __W1_NETLINK_H | 
 |  | 
 | #include <asm/types.h> | 
 | #include <linux/connector.h> | 
 |  | 
 | #include "w1_internal.h" | 
 |  | 
 | /** | 
 |  * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags | 
 |  * | 
 |  * @W1_CN_BUNDLE: Request bundling replies into fewer messagse.  Be prepared | 
 |  * to handle multiple struct cn_msg, struct w1_netlink_msg, and | 
 |  * struct w1_netlink_cmd in one packet. | 
 |  */ | 
 | enum w1_cn_msg_flags { | 
 | 	W1_CN_BUNDLE = 1, | 
 | }; | 
 |  | 
 | /** | 
 |  * enum w1_netlink_message_types - message type | 
 |  * | 
 |  * @W1_SLAVE_ADD: notification that a slave device was added | 
 |  * @W1_SLAVE_REMOVE: notification that a slave device was removed | 
 |  * @W1_MASTER_ADD: notification that a new bus master was added | 
 |  * @W1_MASTER_REMOVE: notification that a bus masterwas removed | 
 |  * @W1_MASTER_CMD: initiate operations on a specific master | 
 |  * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch | 
 |  * operation | 
 |  * @W1_LIST_MASTERS: used to determine the bus master identifiers | 
 |  */ | 
 | enum w1_netlink_message_types { | 
 | 	W1_SLAVE_ADD = 0, | 
 | 	W1_SLAVE_REMOVE, | 
 | 	W1_MASTER_ADD, | 
 | 	W1_MASTER_REMOVE, | 
 | 	W1_MASTER_CMD, | 
 | 	W1_SLAVE_CMD, | 
 | 	W1_LIST_MASTERS, | 
 | }; | 
 |  | 
 | /** | 
 |  * struct w1_netlink_msg - holds w1 message type, id, and result | 
 |  * | 
 |  * @type: one of enum w1_netlink_message_types | 
 |  * @status: kernel feedback for success 0 or errno failure value | 
 |  * @len: length of data following w1_netlink_msg | 
 |  * @id: union holding bus master id (msg.id) and slave device id (id[8]). | 
 |  * @id.id: Slave ID (8 bytes) | 
 |  * @id.mst: bus master identification | 
 |  * @id.mst.id: bus master ID | 
 |  * @id.mst.res: bus master reserved | 
 |  * @data: start address of any following data | 
 |  * | 
 |  * The base message structure for w1 messages over netlink. | 
 |  * The netlink connector data sequence is, struct nlmsghdr, struct cn_msg, | 
 |  * then one or more struct w1_netlink_msg (each with optional data). | 
 |  */ | 
 | struct w1_netlink_msg | 
 | { | 
 | 	__u8				type; | 
 | 	__u8				status; | 
 | 	__u16				len; | 
 | 	union { | 
 | 		__u8			id[8]; | 
 | 		struct w1_mst { | 
 | 			__u32		id; | 
 | 			__u32		res; | 
 | 		} mst; | 
 | 	} id; | 
 | 	__u8				data[0]; | 
 | }; | 
 |  | 
 | /** | 
 |  * enum w1_commands - commands available for master or slave operations | 
 |  * | 
 |  * @W1_CMD_READ: read len bytes | 
 |  * @W1_CMD_WRITE: write len bytes | 
 |  * @W1_CMD_SEARCH: initiate a standard search, returns only the slave | 
 |  * devices found during that search | 
 |  * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming | 
 |  * @W1_CMD_TOUCH: Touches a series of bytes. | 
 |  * @W1_CMD_RESET: sends a bus reset on the given master | 
 |  * @W1_CMD_SLAVE_ADD: adds a slave to the given master, | 
 |  * 8 byte slave id at data[0] | 
 |  * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master, | 
 |  * 8 byte slave id at data[0] | 
 |  * @W1_CMD_LIST_SLAVES: list of slaves registered on this master | 
 |  * @W1_CMD_MAX: number of available commands | 
 |  */ | 
 | enum w1_commands { | 
 | 	W1_CMD_READ = 0, | 
 | 	W1_CMD_WRITE, | 
 | 	W1_CMD_SEARCH, | 
 | 	W1_CMD_ALARM_SEARCH, | 
 | 	W1_CMD_TOUCH, | 
 | 	W1_CMD_RESET, | 
 | 	W1_CMD_SLAVE_ADD, | 
 | 	W1_CMD_SLAVE_REMOVE, | 
 | 	W1_CMD_LIST_SLAVES, | 
 | 	W1_CMD_MAX | 
 | }; | 
 |  | 
 | /** | 
 |  * struct w1_netlink_cmd - holds the command and data | 
 |  * | 
 |  * @cmd: one of enum w1_commands | 
 |  * @res: reserved | 
 |  * @len: length of data following w1_netlink_cmd | 
 |  * @data: start address of any following data | 
 |  * | 
 |  * One or more struct w1_netlink_cmd is placed starting at w1_netlink_msg.data | 
 |  * each with optional data. | 
 |  */ | 
 | struct w1_netlink_cmd | 
 | { | 
 | 	__u8				cmd; | 
 | 	__u8				res; | 
 | 	__u16				len; | 
 | 	__u8				data[0]; | 
 | }; | 
 |  | 
 | #ifdef __KERNEL__ | 
 |  | 
 | void w1_netlink_send(struct w1_master *, struct w1_netlink_msg *); | 
 | int w1_init_netlink(void); | 
 | void w1_fini_netlink(void); | 
 |  | 
 | #endif /* __KERNEL__ */ | 
 | #endif /* __W1_NETLINK_H */ |