| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * Marvell Armada 37xx SoC Peripheral clocks | 
 |  * | 
 |  * Copyright (C) 2016 Marvell | 
 |  * | 
 |  * Gregory CLEMENT <gregory.clement@free-electrons.com> | 
 |  * | 
 |  * Most of the peripheral clocks can be modelled like this: | 
 |  *             _____    _______    _______ | 
 |  * TBG-A-P  --|     |  |       |  |       |   ______ | 
 |  * TBG-B-P  --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk | 
 |  * TBG-A-S  --|     |  |       |  |       |  |______| | 
 |  * TBG-B-S  --|_____|  |_______|  |_______| | 
 |  * | 
 |  * However some clocks may use only one or two block or and use the | 
 |  * xtal clock as parent. | 
 |  */ | 
 |  | 
 | #include <linux/clk-provider.h> | 
 | #include <linux/mfd/syscon.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #define TBG_SEL		0x0 | 
 | #define DIV_SEL0	0x4 | 
 | #define DIV_SEL1	0x8 | 
 | #define DIV_SEL2	0xC | 
 | #define CLK_SEL		0x10 | 
 | #define CLK_DIS		0x14 | 
 |  | 
 | #define  ARMADA_37XX_DVFS_LOAD_1 1 | 
 | #define LOAD_LEVEL_NR	4 | 
 |  | 
 | #define ARMADA_37XX_NB_L0L1	0x18 | 
 | #define ARMADA_37XX_NB_L2L3	0x1C | 
 | #define		ARMADA_37XX_NB_TBG_DIV_OFF	13 | 
 | #define		ARMADA_37XX_NB_TBG_DIV_MASK	0x7 | 
 | #define		ARMADA_37XX_NB_CLK_SEL_OFF	11 | 
 | #define		ARMADA_37XX_NB_CLK_SEL_MASK	0x1 | 
 | #define		ARMADA_37XX_NB_TBG_SEL_OFF	9 | 
 | #define		ARMADA_37XX_NB_TBG_SEL_MASK	0x3 | 
 | #define		ARMADA_37XX_NB_CONFIG_SHIFT	16 | 
 | #define ARMADA_37XX_NB_DYN_MOD	0x24 | 
 | #define		ARMADA_37XX_NB_DFS_EN	31 | 
 | #define ARMADA_37XX_NB_CPU_LOAD	0x30 | 
 | #define		ARMADA_37XX_NB_CPU_LOAD_MASK	0x3 | 
 | #define		ARMADA_37XX_DVFS_LOAD_0		0 | 
 | #define		ARMADA_37XX_DVFS_LOAD_1		1 | 
 | #define		ARMADA_37XX_DVFS_LOAD_2		2 | 
 | #define		ARMADA_37XX_DVFS_LOAD_3		3 | 
 |  | 
 | struct clk_periph_driver_data { | 
 | 	struct clk_hw_onecell_data *hw_data; | 
 | 	spinlock_t lock; | 
 | }; | 
 |  | 
 | struct clk_double_div { | 
 | 	struct clk_hw hw; | 
 | 	void __iomem *reg1; | 
 | 	u8 shift1; | 
 | 	void __iomem *reg2; | 
 | 	u8 shift2; | 
 | }; | 
 |  | 
 | struct clk_pm_cpu { | 
 | 	struct clk_hw hw; | 
 | 	void __iomem *reg_mux; | 
 | 	u8 shift_mux; | 
 | 	u32 mask_mux; | 
 | 	void __iomem *reg_div; | 
 | 	u8 shift_div; | 
 | 	struct regmap *nb_pm_base; | 
 | }; | 
 |  | 
 | #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw) | 
 | #define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw) | 
 |  | 
 | struct clk_periph_data { | 
 | 	const char *name; | 
 | 	const char * const *parent_names; | 
 | 	int num_parents; | 
 | 	struct clk_hw *mux_hw; | 
 | 	struct clk_hw *rate_hw; | 
 | 	struct clk_hw *gate_hw; | 
 | 	struct clk_hw *muxrate_hw; | 
 | 	bool is_double_div; | 
 | }; | 
 |  | 
 | static const struct clk_div_table clk_table6[] = { | 
 | 	{ .val = 1, .div = 1, }, | 
 | 	{ .val = 2, .div = 2, }, | 
 | 	{ .val = 3, .div = 3, }, | 
 | 	{ .val = 4, .div = 4, }, | 
 | 	{ .val = 5, .div = 5, }, | 
 | 	{ .val = 6, .div = 6, }, | 
 | 	{ .val = 0, .div = 0, }, /* last entry */ | 
 | }; | 
 |  | 
 | static const struct clk_div_table clk_table1[] = { | 
 | 	{ .val = 0, .div = 1, }, | 
 | 	{ .val = 1, .div = 2, }, | 
 | 	{ .val = 0, .div = 0, }, /* last entry */ | 
 | }; | 
 |  | 
 | static const struct clk_div_table clk_table2[] = { | 
 | 	{ .val = 0, .div = 2, }, | 
 | 	{ .val = 1, .div = 4, }, | 
 | 	{ .val = 0, .div = 0, }, /* last entry */ | 
 | }; | 
 |  | 
 | static const struct clk_ops clk_double_div_ops; | 
 | static const struct clk_ops clk_pm_cpu_ops; | 
 |  | 
 | #define PERIPH_GATE(_name, _bit)		\ | 
 | struct clk_gate gate_##_name = {		\ | 
 | 	.reg = (void *)CLK_DIS,			\ | 
 | 	.bit_idx = _bit,			\ | 
 | 	.hw.init = &(struct clk_init_data){	\ | 
 | 		.ops =  &clk_gate_ops,		\ | 
 | 	}					\ | 
 | }; | 
 |  | 
 | #define PERIPH_MUX(_name, _shift)		\ | 
 | struct clk_mux mux_##_name = {			\ | 
 | 	.reg = (void *)TBG_SEL,			\ | 
 | 	.shift = _shift,			\ | 
 | 	.mask = 3,				\ | 
 | 	.hw.init = &(struct clk_init_data){	\ | 
 | 		.ops =  &clk_mux_ro_ops,	\ | 
 | 	}					\ | 
 | }; | 
 |  | 
 | #define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2)	\ | 
 | struct clk_double_div rate_##_name = {		\ | 
 | 	.reg1 = (void *)_reg1,			\ | 
 | 	.reg2 = (void *)_reg2,			\ | 
 | 	.shift1 = _shift1,			\ | 
 | 	.shift2 = _shift2,			\ | 
 | 	.hw.init = &(struct clk_init_data){	\ | 
 | 		.ops =  &clk_double_div_ops,	\ | 
 | 	}					\ | 
 | }; | 
 |  | 
 | #define PERIPH_DIV(_name, _reg, _shift, _table)	\ | 
 | struct clk_divider rate_##_name = {		\ | 
 | 	.reg = (void *)_reg,			\ | 
 | 	.table = _table,			\ | 
 | 	.shift = _shift,			\ | 
 | 	.hw.init = &(struct clk_init_data){	\ | 
 | 		.ops =  &clk_divider_ro_ops,	\ | 
 | 	}					\ | 
 | }; | 
 |  | 
 | #define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2)	\ | 
 | struct clk_pm_cpu muxrate_##_name = {		\ | 
 | 	.reg_mux = (void *)TBG_SEL,		\ | 
 | 	.mask_mux = 3,				\ | 
 | 	.shift_mux = _shift1,			\ | 
 | 	.reg_div = (void *)_reg,		\ | 
 | 	.shift_div = _shift2,			\ | 
 | 	.hw.init = &(struct clk_init_data){	\ | 
 | 		.ops =  &clk_pm_cpu_ops,	\ | 
 | 	}					\ | 
 | }; | 
 |  | 
 | #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\ | 
 | static PERIPH_GATE(_name, _bit);			    \ | 
 | static PERIPH_MUX(_name, _shift);			    \ | 
 | static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2); | 
 |  | 
 | #define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table)	\ | 
 | static PERIPH_GATE(_name, _bit);			    \ | 
 | static PERIPH_MUX(_name, _shift);			    \ | 
 | static PERIPH_DIV(_name, _reg, _shift1, _table); | 
 |  | 
 | #define PERIPH_CLK_GATE_DIV(_name, _bit,  _reg, _shift, _table)	\ | 
 | static PERIPH_GATE(_name, _bit);			\ | 
 | static PERIPH_DIV(_name, _reg, _shift, _table); | 
 |  | 
 | #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\ | 
 | static PERIPH_MUX(_name, _shift);			    \ | 
 | static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2); | 
 |  | 
 | #define REF_CLK_FULL(_name)				\ | 
 | 	{ .name = #_name,				\ | 
 | 	  .parent_names = (const char *[]){ "TBG-A-P",	\ | 
 | 	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\ | 
 | 	  .num_parents = 4,				\ | 
 | 	  .mux_hw = &mux_##_name.hw,			\ | 
 | 	  .gate_hw = &gate_##_name.hw,			\ | 
 | 	  .rate_hw = &rate_##_name.hw,			\ | 
 | 	} | 
 |  | 
 | #define REF_CLK_FULL_DD(_name)				\ | 
 | 	{ .name = #_name,				\ | 
 | 	  .parent_names = (const char *[]){ "TBG-A-P",	\ | 
 | 	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\ | 
 | 	  .num_parents = 4,				\ | 
 | 	  .mux_hw = &mux_##_name.hw,			\ | 
 | 	  .gate_hw = &gate_##_name.hw,			\ | 
 | 	  .rate_hw = &rate_##_name.hw,			\ | 
 | 	  .is_double_div = true,			\ | 
 | 	} | 
 |  | 
 | #define REF_CLK_GATE(_name, _parent_name)			\ | 
 | 	{ .name = #_name,					\ | 
 | 	  .parent_names = (const char *[]){ _parent_name},	\ | 
 | 	  .num_parents = 1,					\ | 
 | 	  .gate_hw = &gate_##_name.hw,				\ | 
 | 	} | 
 |  | 
 | #define REF_CLK_GATE_DIV(_name, _parent_name)			\ | 
 | 	{ .name = #_name,					\ | 
 | 	  .parent_names = (const char *[]){ _parent_name},	\ | 
 | 	  .num_parents = 1,					\ | 
 | 	  .gate_hw = &gate_##_name.hw,				\ | 
 | 	  .rate_hw = &rate_##_name.hw,				\ | 
 | 	} | 
 |  | 
 | #define REF_CLK_PM_CPU(_name)				\ | 
 | 	{ .name = #_name,				\ | 
 | 	  .parent_names = (const char *[]){ "TBG-A-P",	\ | 
 | 	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\ | 
 | 	  .num_parents = 4,				\ | 
 | 	  .muxrate_hw = &muxrate_##_name.hw,		\ | 
 | 	} | 
 |  | 
 | #define REF_CLK_MUX_DD(_name)				\ | 
 | 	{ .name = #_name,				\ | 
 | 	  .parent_names = (const char *[]){ "TBG-A-P",	\ | 
 | 	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\ | 
 | 	  .num_parents = 4,				\ | 
 | 	  .mux_hw = &mux_##_name.hw,			\ | 
 | 	  .rate_hw = &rate_##_name.hw,			\ | 
 | 	  .is_double_div = true,			\ | 
 | 	} | 
 |  | 
 | /* NB periph clocks */ | 
 | PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13); | 
 | PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7); | 
 | PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0); | 
 | PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6); | 
 | PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12); | 
 | PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6); | 
 | static PERIPH_GATE(avs, 11); | 
 | PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0); | 
 | PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24); | 
 | static PERIPH_GATE(i2c_2, 16); | 
 | static PERIPH_GATE(i2c_1, 17); | 
 | PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2); | 
 | PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12); | 
 | PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6); | 
 | PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6); | 
 | PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19); | 
 | static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28); | 
 |  | 
 | static struct clk_periph_data data_nb[] = { | 
 | 	REF_CLK_FULL_DD(mmc), | 
 | 	REF_CLK_FULL_DD(sata_host), | 
 | 	REF_CLK_FULL_DD(sec_at), | 
 | 	REF_CLK_FULL_DD(sec_dap), | 
 | 	REF_CLK_FULL_DD(tscem), | 
 | 	REF_CLK_FULL(tscem_tmx), | 
 | 	REF_CLK_GATE(avs, "xtal"), | 
 | 	REF_CLK_FULL_DD(sqf), | 
 | 	REF_CLK_FULL_DD(pwm), | 
 | 	REF_CLK_GATE(i2c_2, "xtal"), | 
 | 	REF_CLK_GATE(i2c_1, "xtal"), | 
 | 	REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"), | 
 | 	REF_CLK_FULL_DD(ddr_fclk), | 
 | 	REF_CLK_FULL(trace), | 
 | 	REF_CLK_FULL(counter), | 
 | 	REF_CLK_FULL_DD(eip97), | 
 | 	REF_CLK_PM_CPU(cpu), | 
 | 	{ }, | 
 | }; | 
 |  | 
 | /* SB periph clocks */ | 
 | PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9); | 
 | PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21); | 
 | PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9); | 
 | static PERIPH_GATE(gbe1_50, 0); | 
 | static PERIPH_GATE(gbe0_50, 1); | 
 | static PERIPH_GATE(gbe1_125, 2); | 
 | static PERIPH_GATE(gbe0_125, 3); | 
 | PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1); | 
 | PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1); | 
 | PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1); | 
 | PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6); | 
 | PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12); | 
 | PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18); | 
 |  | 
 | static struct clk_periph_data data_sb[] = { | 
 | 	REF_CLK_MUX_DD(gbe_50), | 
 | 	REF_CLK_MUX_DD(gbe_core), | 
 | 	REF_CLK_MUX_DD(gbe_125), | 
 | 	REF_CLK_GATE(gbe1_50, "gbe_50"), | 
 | 	REF_CLK_GATE(gbe0_50, "gbe_50"), | 
 | 	REF_CLK_GATE(gbe1_125, "gbe_125"), | 
 | 	REF_CLK_GATE(gbe0_125, "gbe_125"), | 
 | 	REF_CLK_GATE_DIV(gbe1_core, "gbe_core"), | 
 | 	REF_CLK_GATE_DIV(gbe0_core, "gbe_core"), | 
 | 	REF_CLK_GATE_DIV(gbe_bm, "gbe_core"), | 
 | 	REF_CLK_FULL_DD(sdio), | 
 | 	REF_CLK_FULL_DD(usb32_usb2_sys), | 
 | 	REF_CLK_FULL_DD(usb32_ss_sys), | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static unsigned int get_div(void __iomem *reg, int shift) | 
 | { | 
 | 	u32 val; | 
 |  | 
 | 	val = (readl(reg) >> shift) & 0x7; | 
 | 	if (val > 6) | 
 | 		return 0; | 
 | 	return val; | 
 | } | 
 |  | 
 | static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw, | 
 | 						unsigned long parent_rate) | 
 | { | 
 | 	struct clk_double_div *double_div = to_clk_double_div(hw); | 
 | 	unsigned int div; | 
 |  | 
 | 	div = get_div(double_div->reg1, double_div->shift1); | 
 | 	div *= get_div(double_div->reg2, double_div->shift2); | 
 |  | 
 | 	return DIV_ROUND_UP_ULL((u64)parent_rate, div); | 
 | } | 
 |  | 
 | static const struct clk_ops clk_double_div_ops = { | 
 | 	.recalc_rate = clk_double_div_recalc_rate, | 
 | }; | 
 |  | 
 | static void armada_3700_pm_dvfs_update_regs(unsigned int load_level, | 
 | 					    unsigned int *reg, | 
 | 					    unsigned int *offset) | 
 | { | 
 | 	if (load_level <= ARMADA_37XX_DVFS_LOAD_1) | 
 | 		*reg = ARMADA_37XX_NB_L0L1; | 
 | 	else | 
 | 		*reg = ARMADA_37XX_NB_L2L3; | 
 |  | 
 | 	if (load_level == ARMADA_37XX_DVFS_LOAD_0 || | 
 | 	    load_level ==  ARMADA_37XX_DVFS_LOAD_2) | 
 | 		*offset += ARMADA_37XX_NB_CONFIG_SHIFT; | 
 | } | 
 |  | 
 | static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base) | 
 | { | 
 | 	unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD; | 
 |  | 
 | 	if (IS_ERR(base)) | 
 | 		return false; | 
 |  | 
 | 	regmap_read(base, reg, &val); | 
 |  | 
 | 	return !!(val & BIT(ARMADA_37XX_NB_DFS_EN)); | 
 | } | 
 |  | 
 | static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base) | 
 | { | 
 | 	unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; | 
 | 	unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF; | 
 | 	unsigned int load_level, div; | 
 |  | 
 | 	/* | 
 | 	 * This function is always called after the function | 
 | 	 * armada_3700_pm_dvfs_is_enabled, so no need to check again | 
 | 	 * if the base is valid. | 
 | 	 */ | 
 | 	regmap_read(base, reg, &load_level); | 
 |  | 
 | 	/* | 
 | 	 * The register and the offset inside this register accessed to | 
 | 	 * read the current divider depend on the load level | 
 | 	 */ | 
 | 	load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; | 
 | 	armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); | 
 |  | 
 | 	regmap_read(base, reg, &div); | 
 |  | 
 | 	return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK; | 
 | } | 
 |  | 
 | static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base) | 
 | { | 
 | 	unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; | 
 | 	unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF; | 
 | 	unsigned int load_level, sel; | 
 |  | 
 | 	/* | 
 | 	 * This function is always called after the function | 
 | 	 * armada_3700_pm_dvfs_is_enabled, so no need to check again | 
 | 	 * if the base is valid | 
 | 	 */ | 
 | 	regmap_read(base, reg, &load_level); | 
 |  | 
 | 	/* | 
 | 	 * The register and the offset inside this register accessed to | 
 | 	 * read the current divider depend on the load level | 
 | 	 */ | 
 | 	load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; | 
 | 	armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); | 
 |  | 
 | 	regmap_read(base, reg, &sel); | 
 |  | 
 | 	return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK; | 
 | } | 
 |  | 
 | static u8 clk_pm_cpu_get_parent(struct clk_hw *hw) | 
 | { | 
 | 	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); | 
 | 	u32 val; | 
 |  | 
 | 	if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) { | 
 | 		val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base); | 
 | 	} else { | 
 | 		val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux; | 
 | 		val &= pm_cpu->mask_mux; | 
 | 	} | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index) | 
 | { | 
 | 	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); | 
 | 	struct regmap *base = pm_cpu->nb_pm_base; | 
 | 	int load_level; | 
 |  | 
 | 	/* | 
 | 	 * We set the clock parent only if the DVFS is available but | 
 | 	 * not enabled. | 
 | 	 */ | 
 | 	if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Set the parent clock for all the load level */ | 
 | 	for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { | 
 | 		unsigned int reg, mask,  val, | 
 | 			offset = ARMADA_37XX_NB_TBG_SEL_OFF; | 
 |  | 
 | 		armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); | 
 |  | 
 | 		val = index << offset; | 
 | 		mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset; | 
 | 		regmap_update_bits(base, reg, mask, val); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw, | 
 | 					    unsigned long parent_rate) | 
 | { | 
 | 	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); | 
 | 	unsigned int div; | 
 |  | 
 | 	if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) | 
 | 		div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base); | 
 | 	else | 
 | 		div = get_div(pm_cpu->reg_div, pm_cpu->shift_div); | 
 | 	return DIV_ROUND_UP_ULL((u64)parent_rate, div); | 
 | } | 
 |  | 
 | static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, | 
 | 				  unsigned long *parent_rate) | 
 | { | 
 | 	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); | 
 | 	struct regmap *base = pm_cpu->nb_pm_base; | 
 | 	unsigned int div = *parent_rate / rate; | 
 | 	unsigned int load_level; | 
 | 	/* only available when DVFS is enabled */ | 
 | 	if (!armada_3700_pm_dvfs_is_enabled(base)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { | 
 | 		unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF; | 
 |  | 
 | 		armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); | 
 |  | 
 | 		regmap_read(base, reg, &val); | 
 |  | 
 | 		val >>= offset; | 
 | 		val &= ARMADA_37XX_NB_TBG_DIV_MASK; | 
 | 		if (val == div) | 
 | 			/* | 
 | 			 * We found a load level matching the target | 
 | 			 * divider, switch to this load level and | 
 | 			 * return. | 
 | 			 */ | 
 | 			return *parent_rate / div; | 
 | 	} | 
 |  | 
 | 	/* We didn't find any valid divider */ | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /* | 
 |  * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz | 
 |  * respectively) to L0 frequency (1.2 Ghz) requires a significant | 
 |  * amount of time to let VDD stabilize to the appropriate | 
 |  * voltage. This amount of time is large enough that it cannot be | 
 |  * covered by the hardware countdown register. Due to this, the CPU | 
 |  * might start operating at L0 before the voltage is stabilized, | 
 |  * leading to CPU stalls. | 
 |  * | 
 |  * To work around this problem, we prevent switching directly from the | 
 |  * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 | 
 |  * frequency in-between. The sequence therefore becomes: | 
 |  * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) | 
 |  * 2. Sleep 20ms for stabling VDD voltage | 
 |  * 3. Then switch from L1(600MHZ) to L0(1200Mhz). | 
 |  */ | 
 | static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) | 
 | { | 
 | 	unsigned int cur_level; | 
 |  | 
 | 	if (rate != 1200 * 1000 * 1000) | 
 | 		return; | 
 |  | 
 | 	regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); | 
 | 	cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; | 
 | 	if (cur_level <= ARMADA_37XX_DVFS_LOAD_1) | 
 | 		return; | 
 |  | 
 | 	regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, | 
 | 			   ARMADA_37XX_NB_CPU_LOAD_MASK, | 
 | 			   ARMADA_37XX_DVFS_LOAD_1); | 
 | 	msleep(20); | 
 | } | 
 |  | 
 | static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, | 
 | 			       unsigned long parent_rate) | 
 | { | 
 | 	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); | 
 | 	struct regmap *base = pm_cpu->nb_pm_base; | 
 | 	unsigned int div = parent_rate / rate; | 
 | 	unsigned int load_level; | 
 |  | 
 | 	/* only available when DVFS is enabled */ | 
 | 	if (!armada_3700_pm_dvfs_is_enabled(base)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { | 
 | 		unsigned int reg, mask, val, | 
 | 			offset = ARMADA_37XX_NB_TBG_DIV_OFF; | 
 |  | 
 | 		armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); | 
 |  | 
 | 		regmap_read(base, reg, &val); | 
 | 		val >>= offset; | 
 | 		val &= ARMADA_37XX_NB_TBG_DIV_MASK; | 
 |  | 
 | 		if (val == div) { | 
 | 			/* | 
 | 			 * We found a load level matching the target | 
 | 			 * divider, switch to this load level and | 
 | 			 * return. | 
 | 			 */ | 
 | 			reg = ARMADA_37XX_NB_CPU_LOAD; | 
 | 			mask = ARMADA_37XX_NB_CPU_LOAD_MASK; | 
 |  | 
 | 			clk_pm_cpu_set_rate_wa(rate, base); | 
 |  | 
 | 			regmap_update_bits(base, reg, mask, load_level); | 
 |  | 
 | 			return rate; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* We didn't find any valid divider */ | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static const struct clk_ops clk_pm_cpu_ops = { | 
 | 	.get_parent = clk_pm_cpu_get_parent, | 
 | 	.set_parent = clk_pm_cpu_set_parent, | 
 | 	.round_rate = clk_pm_cpu_round_rate, | 
 | 	.set_rate = clk_pm_cpu_set_rate, | 
 | 	.recalc_rate = clk_pm_cpu_recalc_rate, | 
 | }; | 
 |  | 
 | static const struct of_device_id armada_3700_periph_clock_of_match[] = { | 
 | 	{ .compatible = "marvell,armada-3700-periph-clock-nb", | 
 | 	  .data = data_nb, }, | 
 | 	{ .compatible = "marvell,armada-3700-periph-clock-sb", | 
 | 	.data = data_sb, }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | static int armada_3700_add_composite_clk(const struct clk_periph_data *data, | 
 | 					 void __iomem *reg, spinlock_t *lock, | 
 | 					 struct device *dev, struct clk_hw **hw) | 
 | { | 
 | 	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, | 
 | 		*rate_ops = NULL; | 
 | 	struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL; | 
 |  | 
 | 	if (data->mux_hw) { | 
 | 		struct clk_mux *mux; | 
 |  | 
 | 		mux_hw = data->mux_hw; | 
 | 		mux = to_clk_mux(mux_hw); | 
 | 		mux->lock = lock; | 
 | 		mux_ops = mux_hw->init->ops; | 
 | 		mux->reg = reg + (u64)mux->reg; | 
 | 	} | 
 |  | 
 | 	if (data->gate_hw) { | 
 | 		struct clk_gate *gate; | 
 |  | 
 | 		gate_hw = data->gate_hw; | 
 | 		gate = to_clk_gate(gate_hw); | 
 | 		gate->lock = lock; | 
 | 		gate_ops = gate_hw->init->ops; | 
 | 		gate->reg = reg + (u64)gate->reg; | 
 | 		gate->flags = CLK_GATE_SET_TO_DISABLE; | 
 | 	} | 
 |  | 
 | 	if (data->rate_hw) { | 
 | 		rate_hw = data->rate_hw; | 
 | 		rate_ops = rate_hw->init->ops; | 
 | 		if (data->is_double_div) { | 
 | 			struct clk_double_div *rate; | 
 |  | 
 | 			rate =  to_clk_double_div(rate_hw); | 
 | 			rate->reg1 = reg + (u64)rate->reg1; | 
 | 			rate->reg2 = reg + (u64)rate->reg2; | 
 | 		} else { | 
 | 			struct clk_divider *rate = to_clk_divider(rate_hw); | 
 | 			const struct clk_div_table *clkt; | 
 | 			int table_size = 0; | 
 |  | 
 | 			rate->reg = reg + (u64)rate->reg; | 
 | 			for (clkt = rate->table; clkt->div; clkt++) | 
 | 				table_size++; | 
 | 			rate->width = order_base_2(table_size); | 
 | 			rate->lock = lock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (data->muxrate_hw) { | 
 | 		struct clk_pm_cpu *pmcpu_clk; | 
 | 		struct clk_hw *muxrate_hw = data->muxrate_hw; | 
 | 		struct regmap *map; | 
 |  | 
 | 		pmcpu_clk =  to_clk_pm_cpu(muxrate_hw); | 
 | 		pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux; | 
 | 		pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div; | 
 |  | 
 | 		mux_hw = muxrate_hw; | 
 | 		rate_hw = muxrate_hw; | 
 | 		mux_ops = muxrate_hw->init->ops; | 
 | 		rate_ops = muxrate_hw->init->ops; | 
 |  | 
 | 		map = syscon_regmap_lookup_by_compatible( | 
 | 				"marvell,armada-3700-nb-pm"); | 
 | 		pmcpu_clk->nb_pm_base = map; | 
 | 	} | 
 |  | 
 | 	*hw = clk_hw_register_composite(dev, data->name, data->parent_names, | 
 | 					data->num_parents, mux_hw, | 
 | 					mux_ops, rate_hw, rate_ops, | 
 | 					gate_hw, gate_ops, CLK_IGNORE_UNUSED); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(*hw); | 
 | } | 
 |  | 
 | static int armada_3700_periph_clock_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct clk_periph_driver_data *driver_data; | 
 | 	struct device_node *np = pdev->dev.of_node; | 
 | 	const struct clk_periph_data *data; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	int num_periph = 0, i, ret; | 
 | 	struct resource *res; | 
 | 	void __iomem *reg; | 
 |  | 
 | 	data = of_device_get_match_data(dev); | 
 | 	if (!data) | 
 | 		return -ENODEV; | 
 |  | 
 | 	while (data[num_periph].name) | 
 | 		num_periph++; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	reg = devm_ioremap_resource(dev, res); | 
 | 	if (IS_ERR(reg)) | 
 | 		return PTR_ERR(reg); | 
 |  | 
 | 	driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL); | 
 | 	if (!driver_data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	driver_data->hw_data = devm_kzalloc(dev, | 
 | 					    struct_size(driver_data->hw_data, | 
 | 							hws, num_periph), | 
 | 					    GFP_KERNEL); | 
 | 	if (!driver_data->hw_data) | 
 | 		return -ENOMEM; | 
 | 	driver_data->hw_data->num = num_periph; | 
 |  | 
 | 	spin_lock_init(&driver_data->lock); | 
 |  | 
 | 	for (i = 0; i < num_periph; i++) { | 
 | 		struct clk_hw **hw = &driver_data->hw_data->hws[i]; | 
 |  | 
 | 		if (armada_3700_add_composite_clk(&data[i], reg, | 
 | 						  &driver_data->lock, dev, hw)) | 
 | 			dev_err(dev, "Can't register periph clock %s\n", | 
 | 				data[i].name); | 
 | 	} | 
 |  | 
 | 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, | 
 | 				     driver_data->hw_data); | 
 | 	if (ret) { | 
 | 		for (i = 0; i < num_periph; i++) | 
 | 			clk_hw_unregister(driver_data->hw_data->hws[i]); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, driver_data); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int armada_3700_periph_clock_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct clk_periph_driver_data *data = platform_get_drvdata(pdev); | 
 | 	struct clk_hw_onecell_data *hw_data = data->hw_data; | 
 | 	int i; | 
 |  | 
 | 	of_clk_del_provider(pdev->dev.of_node); | 
 |  | 
 | 	for (i = 0; i < hw_data->num; i++) | 
 | 		clk_hw_unregister(hw_data->hws[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver armada_3700_periph_clock_driver = { | 
 | 	.probe = armada_3700_periph_clock_probe, | 
 | 	.remove = armada_3700_periph_clock_remove, | 
 | 	.driver		= { | 
 | 		.name	= "marvell-armada-3700-periph-clock", | 
 | 		.of_match_table = armada_3700_periph_clock_of_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | builtin_platform_driver(armada_3700_periph_clock_driver); |