src/kernel/linux/v4.19/drivers/hwmon/lm75.c - T800 - Gitiles

 /*
  * lm75.c - Part of lm_sensors, Linux kernel modules for hardware
  *	 monitoring
  * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/of_device.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include "lm75.h"


 /*
  * This driver handles the LM75 and compatible digital temperature sensors.
  */

 enum lm75_type {		/* keep sorted in alphabetical order */
 	adt75,
 	ds1775,
 	ds75,
 	ds7505,
 	g751,
 	lm75,
 	lm75a,
 	lm75b,
 	max6625,
 	max6626,
 	mcp980x,
 	stds75,
 	tcn75,
 	tmp100,
 	tmp101,
 	tmp105,
 	tmp112,
 	tmp175,
 	tmp275,
 	tmp75,
 	tmp75c,
 };

 /* Addresses scanned */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };


 /* The LM75 registers */
 #define LM75_REG_TEMP		0x00
 #define LM75_REG_CONF		0x01
 #define LM75_REG_HYST		0x02
 #define LM75_REG_MAX		0x03

 /* Each client has this additional data */
 struct lm75_data {
 	struct i2c_client	*client;
 	struct regmap		*regmap;
 	u8			orig_conf;
 	u8			resolution;	/* In bits, between 9 and 12 */
 	u8			resolution_limits;
 	unsigned int		sample_time;	/* In ms */
 };

 /*-----------------------------------------------------------------------*/

 static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
 {
 	return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
 }

 static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
 		     u32 attr, int channel, long *val)
 {
 	struct lm75_data *data = dev_get_drvdata(dev);
 	unsigned int regval;
 	int err, reg;

 	switch (type) {
 	case hwmon_chip:
 		switch (attr) {
 		case hwmon_chip_update_interval:
 			*val = data->sample_time;
 			break;
 		default:
 			return -EINVAL;
 		}
 		break;
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp_input:
 			reg = LM75_REG_TEMP;
 			break;
 		case hwmon_temp_max:
 			reg = LM75_REG_MAX;
 			break;
 		case hwmon_temp_max_hyst:
 			reg = LM75_REG_HYST;
 			break;
 		default:
 			return -EINVAL;
 		}
 		err = regmap_read(data->regmap, reg, &regval);
 		if (err < 0)
 			return err;

 		*val = lm75_reg_to_mc(regval, data->resolution);
 		break;
 	default:
 		return -EINVAL;
 	}
 	return 0;
 }

 static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
 		      u32 attr, int channel, long temp)
 {
 	struct lm75_data *data = dev_get_drvdata(dev);
 	u8 resolution;
 	int reg;

 	if (type != hwmon_temp)
 		return -EINVAL;

 	switch (attr) {
 	case hwmon_temp_max:
 		reg = LM75_REG_MAX;
 		break;
 	case hwmon_temp_max_hyst:
 		reg = LM75_REG_HYST;
 		break;
 	default:
 		return -EINVAL;
 	}

 	/*
 	 * Resolution of limit registers is assumed to be the same as the
 	 * temperature input register resolution unless given explicitly.
 	 */
 	if (data->resolution_limits)
 		resolution = data->resolution_limits;
 	else
 		resolution = data->resolution;

 	temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
 	temp = DIV_ROUND_CLOSEST(temp  << (resolution - 8),
 				 1000) << (16 - resolution);

 	return regmap_write(data->regmap, reg, temp);
 }

 static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
 			       u32 attr, int channel)
 {
 	switch (type) {
 	case hwmon_chip:
 		switch (attr) {
 		case hwmon_chip_update_interval:
 			return S_IRUGO;
 		}
 		break;
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp_input:
 			return S_IRUGO;
 		case hwmon_temp_max:
 		case hwmon_temp_max_hyst:
 			return S_IRUGO | S_IWUSR;
 		}
 		break;
 	default:
 		break;
 	}
 	return 0;
 }

 /*-----------------------------------------------------------------------*/

 /* device probe and removal */

 /* chip configuration */

 static const u32 lm75_chip_config[] = {
 	HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
 	0
 };

 static const struct hwmon_channel_info lm75_chip = {
 	.type = hwmon_chip,
 	.config = lm75_chip_config,
 };

 static const u32 lm75_temp_config[] = {
 	HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST,
 	0
 };

 static const struct hwmon_channel_info lm75_temp = {
 	.type = hwmon_temp,
 	.config = lm75_temp_config,
 };

 static const struct hwmon_channel_info *lm75_info[] = {
 	&lm75_chip,
 	&lm75_temp,
 	NULL
 };

 static const struct hwmon_ops lm75_hwmon_ops = {
 	.is_visible = lm75_is_visible,
 	.read = lm75_read,
 	.write = lm75_write,
 };

 static const struct hwmon_chip_info lm75_chip_info = {
 	.ops = &lm75_hwmon_ops,
 	.info = lm75_info,
 };

 static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
 {
 	return reg != LM75_REG_TEMP;
 }

 static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
 {
 	return reg == LM75_REG_TEMP;
 }

 static const struct regmap_config lm75_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 	.max_register = LM75_REG_MAX,
 	.writeable_reg = lm75_is_writeable_reg,
 	.volatile_reg = lm75_is_volatile_reg,
 	.val_format_endian = REGMAP_ENDIAN_BIG,
 	.cache_type = REGCACHE_RBTREE,
 	.use_single_rw = true,
 };

 static void lm75_remove(void *data)
 {
 	struct lm75_data *lm75 = data;
 	struct i2c_client *client = lm75->client;

 	i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
 }

 static int
 lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct lm75_data *data;
 	int status, err;
 	u8 set_mask, clr_mask;
 	int new;
 	enum lm75_type kind;

 	if (client->dev.of_node)
 		kind = (enum lm75_type)of_device_get_match_data(&client->dev);
 	else
 		kind = id->driver_data;

 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
 		return -EIO;

 	data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

 	data->client = client;

 	data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
 	if (IS_ERR(data->regmap))
 		return PTR_ERR(data->regmap);

 	/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
 	 * Then tweak to be more precise when appropriate.
 	 */
 	set_mask = 0;
 	clr_mask = LM75_SHUTDOWN;		/* continuous conversions */

 	switch (kind) {
 	case adt75:
 		clr_mask |= 1 << 5;		/* not one-shot mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 8;
 		break;
 	case ds1775:
 	case ds75:
 	case stds75:
 		clr_mask |= 3 << 5;
 		set_mask |= 2 << 5;		/* 11-bit mode */
 		data->resolution = 11;
 		data->sample_time = MSEC_PER_SEC;
 		break;
 	case ds7505:
 		set_mask |= 3 << 5;		/* 12-bit mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	case g751:
 	case lm75:
 	case lm75a:
 		data->resolution = 9;
 		data->sample_time = MSEC_PER_SEC / 2;
 		break;
 	case lm75b:
 		data->resolution = 11;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	case max6625:
 		data->resolution = 9;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	case max6626:
 		data->resolution = 12;
 		data->resolution_limits = 9;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	case tcn75:
 		data->resolution = 9;
 		data->sample_time = MSEC_PER_SEC / 8;
 		break;
 	case mcp980x:
 		data->resolution_limits = 9;
 		/* fall through */
 	case tmp100:
 	case tmp101:
 		set_mask |= 3 << 5;		/* 12-bit mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC;
 		clr_mask |= 1 << 7;		/* not one-shot mode */
 		break;
 	case tmp112:
 		set_mask |= 3 << 5;		/* 12-bit mode */
 		clr_mask |= 1 << 7;		/* not one-shot mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	case tmp105:
 	case tmp175:
 	case tmp275:
 	case tmp75:
 		set_mask |= 3 << 5;		/* 12-bit mode */
 		clr_mask |= 1 << 7;		/* not one-shot mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 2;
 		break;
 	case tmp75c:
 		clr_mask |= 1 << 5;		/* not one-shot mode */
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 4;
 		break;
 	}

 	/* configure as specified */
 	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
 	if (status < 0) {
 		dev_dbg(dev, "Can't read config? %d\n", status);
 		return status;
 	}
 	data->orig_conf = status;
 	new = status & ~clr_mask;
 	new |= set_mask;
 	if (status != new)
 		i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);

 	err = devm_add_action_or_reset(dev, lm75_remove, data);
 	if (err)
 		return err;

 	dev_dbg(dev, "Config %02x\n", new);

 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
 							 data, &lm75_chip_info,
 							 NULL);
 	if (IS_ERR(hwmon_dev))
 		return PTR_ERR(hwmon_dev);

 	dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);

 	return 0;
 }

 static const struct i2c_device_id lm75_ids[] = {
 	{ "adt75", adt75, },
 	{ "ds1775", ds1775, },
 	{ "ds75", ds75, },
 	{ "ds7505", ds7505, },
 	{ "g751", g751, },
 	{ "lm75", lm75, },
 	{ "lm75a", lm75a, },
 	{ "lm75b", lm75b, },
 	{ "max6625", max6625, },
 	{ "max6626", max6626, },
 	{ "mcp980x", mcp980x, },
 	{ "stds75", stds75, },
 	{ "tcn75", tcn75, },
 	{ "tmp100", tmp100, },
 	{ "tmp101", tmp101, },
 	{ "tmp105", tmp105, },
 	{ "tmp112", tmp112, },
 	{ "tmp175", tmp175, },
 	{ "tmp275", tmp275, },
 	{ "tmp75", tmp75, },
 	{ "tmp75c", tmp75c, },
 	{ /* LIST END */ }
 };
 MODULE_DEVICE_TABLE(i2c, lm75_ids);

 static const struct of_device_id lm75_of_match[] = {
 	{
 		.compatible = "adi,adt75",
 		.data = (void *)adt75
 	},
 	{
 		.compatible = "dallas,ds1775",
 		.data = (void *)ds1775
 	},
 	{
 		.compatible = "dallas,ds75",
 		.data = (void *)ds75
 	},
 	{
 		.compatible = "dallas,ds7505",
 		.data = (void *)ds7505
 	},
 	{
 		.compatible = "gmt,g751",
 		.data = (void *)g751
 	},
 	{
 		.compatible = "national,lm75",
 		.data = (void *)lm75
 	},
 	{
 		.compatible = "national,lm75a",
 		.data = (void *)lm75a
 	},
 	{
 		.compatible = "national,lm75b",
 		.data = (void *)lm75b
 	},
 	{
 		.compatible = "maxim,max6625",
 		.data = (void *)max6625
 	},
 	{
 		.compatible = "maxim,max6626",
 		.data = (void *)max6626
 	},
 	{
 		.compatible = "maxim,mcp980x",
 		.data = (void *)mcp980x
 	},
 	{
 		.compatible = "st,stds75",
 		.data = (void *)stds75
 	},
 	{
 		.compatible = "microchip,tcn75",
 		.data = (void *)tcn75
 	},
 	{
 		.compatible = "ti,tmp100",
 		.data = (void *)tmp100
 	},
 	{
 		.compatible = "ti,tmp101",
 		.data = (void *)tmp101
 	},
 	{
 		.compatible = "ti,tmp105",
 		.data = (void *)tmp105
 	},
 	{
 		.compatible = "ti,tmp112",
 		.data = (void *)tmp112
 	},
 	{
 		.compatible = "ti,tmp175",
 		.data = (void *)tmp175
 	},
 	{
 		.compatible = "ti,tmp275",
 		.data = (void *)tmp275
 	},
 	{
 		.compatible = "ti,tmp75",
 		.data = (void *)tmp75
 	},
 	{
 		.compatible = "ti,tmp75c",
 		.data = (void *)tmp75c
 	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, lm75_of_match);

 #define LM75A_ID 0xA1

 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int lm75_detect(struct i2c_client *new_client,
 		       struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
 	int i;
 	int conf, hyst, os;
 	bool is_lm75a = 0;

 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;

 	/*
 	 * Now, we do the remaining detection. There is no identification-
 	 * dedicated register so we have to rely on several tricks:
 	 * unused bits, registers cycling over 8-address boundaries,
 	 * addresses 0x04-0x07 returning the last read value.
 	 * The cycling+unused addresses combination is not tested,
 	 * since it would significantly slow the detection down and would
 	 * hardly add any value.
 	 *
 	 * The National Semiconductor LM75A is different than earlier
 	 * LM75s.  It has an ID byte of 0xaX (where X is the chip
 	 * revision, with 1 being the only revision in existence) in
 	 * register 7, and unused registers return 0xff rather than the
 	 * last read value.
 	 *
 	 * Note that this function only detects the original National
 	 * Semiconductor LM75 and the LM75A. Clones from other vendors
 	 * aren't detected, on purpose, because they are typically never
 	 * found on PC hardware. They are found on embedded designs where
 	 * they can be instantiated explicitly so detection is not needed.
 	 * The absence of identification registers on all these clones
 	 * would make their exhaustive detection very difficult and weak,
 	 * and odds are that the driver would bind to unsupported devices.
 	 */

 	/* Unused bits */
 	conf = i2c_smbus_read_byte_data(new_client, 1);
 	if (conf & 0xe0)
 		return -ENODEV;

 	/* First check for LM75A */
 	if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
 		/* LM75A returns 0xff on unused registers so
 		   just to be sure we check for that too. */
 		if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
 		 || i2c_smbus_read_byte_data(new_client, 5) != 0xff
 		 || i2c_smbus_read_byte_data(new_client, 6) != 0xff)
 			return -ENODEV;
 		is_lm75a = 1;
 		hyst = i2c_smbus_read_byte_data(new_client, 2);
 		os = i2c_smbus_read_byte_data(new_client, 3);
 	} else { /* Traditional style LM75 detection */
 		/* Unused addresses */
 		hyst = i2c_smbus_read_byte_data(new_client, 2);
 		if (i2c_smbus_read_byte_data(new_client, 4) != hyst
 		 || i2c_smbus_read_byte_data(new_client, 5) != hyst
 		 || i2c_smbus_read_byte_data(new_client, 6) != hyst
 		 || i2c_smbus_read_byte_data(new_client, 7) != hyst)
 			return -ENODEV;
 		os = i2c_smbus_read_byte_data(new_client, 3);
 		if (i2c_smbus_read_byte_data(new_client, 4) != os
 		 || i2c_smbus_read_byte_data(new_client, 5) != os
 		 || i2c_smbus_read_byte_data(new_client, 6) != os
 		 || i2c_smbus_read_byte_data(new_client, 7) != os)
 			return -ENODEV;
 	}
 	/*
 	 * It is very unlikely that this is a LM75 if both
 	 * hysteresis and temperature limit registers are 0.
 	 */
 	if (hyst == 0 && os == 0)
 		return -ENODEV;

 	/* Addresses cycling */
 	for (i = 8; i <= 248; i += 40) {
 		if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
 		 || i2c_smbus_read_byte_data(new_client, i + 2) != hyst
 		 || i2c_smbus_read_byte_data(new_client, i + 3) != os)
 			return -ENODEV;
 		if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
 				!= LM75A_ID)
 			return -ENODEV;
 	}

 	strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);

 	return 0;
 }

 #ifdef CONFIG_PM
 static int lm75_suspend(struct device *dev)
 {
 	int status;
 	struct i2c_client *client = to_i2c_client(dev);
 	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
 	if (status < 0) {
 		dev_dbg(&client->dev, "Can't read config? %d\n", status);
 		return status;
 	}
 	status = status | LM75_SHUTDOWN;
 	i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
 	return 0;
 }

 static int lm75_resume(struct device *dev)
 {
 	int status;
 	struct i2c_client *client = to_i2c_client(dev);
 	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
 	if (status < 0) {
 		dev_dbg(&client->dev, "Can't read config? %d\n", status);
 		return status;
 	}
 	status = status & ~LM75_SHUTDOWN;
 	i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
 	return 0;
 }

 static const struct dev_pm_ops lm75_dev_pm_ops = {
 	.suspend	= lm75_suspend,
 	.resume		= lm75_resume,
 };
 #define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
 #else
 #define LM75_DEV_PM_OPS NULL
 #endif /* CONFIG_PM */

 static struct i2c_driver lm75_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm75",
 		.of_match_table = of_match_ptr(lm75_of_match),
 		.pm	= LM75_DEV_PM_OPS,
 	},
 	.probe		= lm75_probe,
 	.id_table	= lm75_ids,
 	.detect		= lm75_detect,
 	.address_list	= normal_i2c,
 };

 module_i2c_driver(lm75_driver);

 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
 MODULE_DESCRIPTION("LM75 driver");
 MODULE_LICENSE("GPL");
	/*
	* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
	* monitoring
	* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/jiffies.h>
	#include <linux/i2c.h>
	#include <linux/hwmon.h>
	#include <linux/hwmon-sysfs.h>
	#include <linux/err.h>
	#include <linux/of_device.h>
	#include <linux/of.h>
	#include <linux/regmap.h>
	#include "lm75.h"


	/*
	* This driver handles the LM75 and compatible digital temperature sensors.
	*/

	enum lm75_type { /* keep sorted in alphabetical order */
	adt75,
	ds1775,
	ds75,
	ds7505,
	g751,
	lm75,
	lm75a,
	lm75b,
	max6625,
	max6626,
	mcp980x,
	stds75,
	tcn75,
	tmp100,
	tmp101,
	tmp105,
	tmp112,
	tmp175,
	tmp275,
	tmp75,
	tmp75c,
	};

	/* Addresses scanned */
	static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
	0x4d, 0x4e, 0x4f, I2C_CLIENT_END };


	/* The LM75 registers */
	#define LM75_REG_TEMP 0x00
	#define LM75_REG_CONF 0x01
	#define LM75_REG_HYST 0x02
	#define LM75_REG_MAX 0x03

	/* Each client has this additional data */
	struct lm75_data {
	struct i2c_client *client;
	struct regmap *regmap;
	u8 orig_conf;
	u8 resolution; /* In bits, between 9 and 12 */
	u8 resolution_limits;
	unsigned int sample_time; /* In ms */
	};

	/-----------------------------------------------------------------------/

	static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
	{
	return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
	}

	static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
	u32 attr, int channel, long *val)
	{
	struct lm75_data *data = dev_get_drvdata(dev);
	unsigned int regval;
	int err, reg;

	switch (type) {
	case hwmon_chip:
	switch (attr) {
	case hwmon_chip_update_interval:
	*val = data->sample_time;
	break;
	default:
	return -EINVAL;
	}
	break;
	case hwmon_temp:
	switch (attr) {
	case hwmon_temp_input:
	reg = LM75_REG_TEMP;
	break;
	case hwmon_temp_max:
	reg = LM75_REG_MAX;
	break;
	case hwmon_temp_max_hyst:
	reg = LM75_REG_HYST;
	break;
	default:
	return -EINVAL;
	}
	err = regmap_read(data->regmap, reg, &regval);
	if (err < 0)
	return err;

	*val = lm75_reg_to_mc(regval, data->resolution);
	break;
	default:
	return -EINVAL;
	}
	return 0;
	}

	static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
	u32 attr, int channel, long temp)
	{
	struct lm75_data *data = dev_get_drvdata(dev);
	u8 resolution;
	int reg;

	if (type != hwmon_temp)
	return -EINVAL;

	switch (attr) {
	case hwmon_temp_max:
	reg = LM75_REG_MAX;
	break;
	case hwmon_temp_max_hyst:
	reg = LM75_REG_HYST;
	break;
	default:
	return -EINVAL;
	}

	/*
	* Resolution of limit registers is assumed to be the same as the
	* temperature input register resolution unless given explicitly.
	*/
	if (data->resolution_limits)
	resolution = data->resolution_limits;
	else
	resolution = data->resolution;

	temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
	temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
	1000) << (16 - resolution);

	return regmap_write(data->regmap, reg, temp);
	}

	static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
	u32 attr, int channel)
	{
	switch (type) {
	case hwmon_chip:
	switch (attr) {
	case hwmon_chip_update_interval:
	return S_IRUGO;
	}
	break;
	case hwmon_temp:
	switch (attr) {
	case hwmon_temp_input:
	return S_IRUGO;
	case hwmon_temp_max:
	case hwmon_temp_max_hyst:
	return S_IRUGO \| S_IWUSR;
	}
	break;
	default:
	break;
	}
	return 0;
	}

	/-----------------------------------------------------------------------/

	/* device probe and removal */

	/* chip configuration */

	static const u32 lm75_chip_config[] = {
	HWMON_C_REGISTER_TZ \| HWMON_C_UPDATE_INTERVAL,
	0
	};

	static const struct hwmon_channel_info lm75_chip = {
	.type = hwmon_chip,
	.config = lm75_chip_config,
	};

	static const u32 lm75_temp_config[] = {
	HWMON_T_INPUT \| HWMON_T_MAX \| HWMON_T_MAX_HYST,
	0
	};

	static const struct hwmon_channel_info lm75_temp = {
	.type = hwmon_temp,
	.config = lm75_temp_config,
	};

	static const struct hwmon_channel_info *lm75_info[] = {
	&lm75_chip,
	&lm75_temp,
	NULL
	};

	static const struct hwmon_ops lm75_hwmon_ops = {
	.is_visible = lm75_is_visible,
	.read = lm75_read,
	.write = lm75_write,
	};

	static const struct hwmon_chip_info lm75_chip_info = {
	.ops = &lm75_hwmon_ops,
	.info = lm75_info,
	};

	static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
	{
	return reg != LM75_REG_TEMP;
	}

	static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
	{
	return reg == LM75_REG_TEMP;
	}

	static const struct regmap_config lm75_regmap_config = {
	.reg_bits = 8,
	.val_bits = 16,
	.max_register = LM75_REG_MAX,
	.writeable_reg = lm75_is_writeable_reg,
	.volatile_reg = lm75_is_volatile_reg,
	.val_format_endian = REGMAP_ENDIAN_BIG,
	.cache_type = REGCACHE_RBTREE,
	.use_single_rw = true,
	};

	static void lm75_remove(void *data)
	{
	struct lm75_data *lm75 = data;
	struct i2c_client *client = lm75->client;

	i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
	}

	static int
	lm75_probe(struct i2c_client client, const struct i2c_device_id id)
	{
	struct device *dev = &client->dev;
	struct device *hwmon_dev;
	struct lm75_data *data;
	int status, err;
	u8 set_mask, clr_mask;
	int new;
	enum lm75_type kind;

	if (client->dev.of_node)
	kind = (enum lm75_type)of_device_get_match_data(&client->dev);
	else
	kind = id->driver_data;

	if (!i2c_check_functionality(client->adapter,
	I2C_FUNC_SMBUS_BYTE_DATA \| I2C_FUNC_SMBUS_WORD_DATA))
	return -EIO;

	data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
	if (!data)
	return -ENOMEM;

	data->client = client;

	data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
	if (IS_ERR(data->regmap))
	return PTR_ERR(data->regmap);

	/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
	* Then tweak to be more precise when appropriate.
	*/
	set_mask = 0;
	clr_mask = LM75_SHUTDOWN; /* continuous conversions */

	switch (kind) {
	case adt75:
	clr_mask \|= 1 << 5; /* not one-shot mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC / 8;
	break;
	case ds1775:
	case ds75:
	case stds75:
	clr_mask \|= 3 << 5;
	set_mask \|= 2 << 5; /* 11-bit mode */
	data->resolution = 11;
	data->sample_time = MSEC_PER_SEC;
	break;
	case ds7505:
	set_mask \|= 3 << 5; /* 12-bit mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	case g751:
	case lm75:
	case lm75a:
	data->resolution = 9;
	data->sample_time = MSEC_PER_SEC / 2;
	break;
	case lm75b:
	data->resolution = 11;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	case max6625:
	data->resolution = 9;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	case max6626:
	data->resolution = 12;
	data->resolution_limits = 9;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	case tcn75:
	data->resolution = 9;
	data->sample_time = MSEC_PER_SEC / 8;
	break;
	case mcp980x:
	data->resolution_limits = 9;
	/* fall through */
	case tmp100:
	case tmp101:
	set_mask \|= 3 << 5; /* 12-bit mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC;
	clr_mask \|= 1 << 7; /* not one-shot mode */
	break;
	case tmp112:
	set_mask \|= 3 << 5; /* 12-bit mode */
	clr_mask \|= 1 << 7; /* not one-shot mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	case tmp105:
	case tmp175:
	case tmp275:
	case tmp75:
	set_mask \|= 3 << 5; /* 12-bit mode */
	clr_mask \|= 1 << 7; /* not one-shot mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC / 2;
	break;
	case tmp75c:
	clr_mask \|= 1 << 5; /* not one-shot mode */
	data->resolution = 12;
	data->sample_time = MSEC_PER_SEC / 4;
	break;
	}

	/* configure as specified */
	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
	if (status < 0) {
	dev_dbg(dev, "Can't read config? %d\n", status);
	return status;
	}
	data->orig_conf = status;
	new = status & ~clr_mask;
	new \|= set_mask;
	if (status != new)
	i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);

	err = devm_add_action_or_reset(dev, lm75_remove, data);
	if (err)
	return err;

	dev_dbg(dev, "Config %02x\n", new);

	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
	data, &lm75_chip_info,
	NULL);
	if (IS_ERR(hwmon_dev))
	return PTR_ERR(hwmon_dev);

	dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);

	return 0;
	}

	static const struct i2c_device_id lm75_ids[] = {
	{ "adt75", adt75, },
	{ "ds1775", ds1775, },
	{ "ds75", ds75, },
	{ "ds7505", ds7505, },
	{ "g751", g751, },
	{ "lm75", lm75, },
	{ "lm75a", lm75a, },
	{ "lm75b", lm75b, },
	{ "max6625", max6625, },
	{ "max6626", max6626, },
	{ "mcp980x", mcp980x, },
	{ "stds75", stds75, },
	{ "tcn75", tcn75, },
	{ "tmp100", tmp100, },
	{ "tmp101", tmp101, },
	{ "tmp105", tmp105, },
	{ "tmp112", tmp112, },
	{ "tmp175", tmp175, },
	{ "tmp275", tmp275, },
	{ "tmp75", tmp75, },
	{ "tmp75c", tmp75c, },
	{ /* LIST END */ }
	};
	MODULE_DEVICE_TABLE(i2c, lm75_ids);

	static const struct of_device_id lm75_of_match[] = {
	{
	.compatible = "adi,adt75",
	.data = (void *)adt75
	},
	{
	.compatible = "dallas,ds1775",
	.data = (void *)ds1775
	},
	{
	.compatible = "dallas,ds75",
	.data = (void *)ds75
	},
	{
	.compatible = "dallas,ds7505",
	.data = (void *)ds7505
	},
	{
	.compatible = "gmt,g751",
	.data = (void *)g751
	},
	{
	.compatible = "national,lm75",
	.data = (void *)lm75
	},
	{
	.compatible = "national,lm75a",
	.data = (void *)lm75a
	},
	{
	.compatible = "national,lm75b",
	.data = (void *)lm75b
	},
	{
	.compatible = "maxim,max6625",
	.data = (void *)max6625
	},
	{
	.compatible = "maxim,max6626",
	.data = (void *)max6626
	},
	{
	.compatible = "maxim,mcp980x",
	.data = (void *)mcp980x
	},
	{
	.compatible = "st,stds75",
	.data = (void *)stds75
	},
	{
	.compatible = "microchip,tcn75",
	.data = (void *)tcn75
	},
	{
	.compatible = "ti,tmp100",
	.data = (void *)tmp100
	},
	{
	.compatible = "ti,tmp101",
	.data = (void *)tmp101
	},
	{
	.compatible = "ti,tmp105",
	.data = (void *)tmp105
	},
	{
	.compatible = "ti,tmp112",
	.data = (void *)tmp112
	},
	{
	.compatible = "ti,tmp175",
	.data = (void *)tmp175
	},
	{
	.compatible = "ti,tmp275",
	.data = (void *)tmp275
	},
	{
	.compatible = "ti,tmp75",
	.data = (void *)tmp75
	},
	{
	.compatible = "ti,tmp75c",
	.data = (void *)tmp75c
	},
	{ },
	};
	MODULE_DEVICE_TABLE(of, lm75_of_match);

	#define LM75A_ID 0xA1

	/* Return 0 if detection is successful, -ENODEV otherwise */
	static int lm75_detect(struct i2c_client *new_client,
	struct i2c_board_info *info)
	{
	struct i2c_adapter *adapter = new_client->adapter;
	int i;
	int conf, hyst, os;
	bool is_lm75a = 0;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA \|
	I2C_FUNC_SMBUS_WORD_DATA))
	return -ENODEV;

	/*
	* Now, we do the remaining detection. There is no identification-
	* dedicated register so we have to rely on several tricks:
	* unused bits, registers cycling over 8-address boundaries,
	* addresses 0x04-0x07 returning the last read value.
	* The cycling+unused addresses combination is not tested,
	* since it would significantly slow the detection down and would
	* hardly add any value.
	*
	* The National Semiconductor LM75A is different than earlier
	* LM75s. It has an ID byte of 0xaX (where X is the chip
	* revision, with 1 being the only revision in existence) in
	* register 7, and unused registers return 0xff rather than the
	* last read value.
	*
	* Note that this function only detects the original National
	* Semiconductor LM75 and the LM75A. Clones from other vendors
	* aren't detected, on purpose, because they are typically never
	* found on PC hardware. They are found on embedded designs where
	* they can be instantiated explicitly so detection is not needed.
	* The absence of identification registers on all these clones
	* would make their exhaustive detection very difficult and weak,
	* and odds are that the driver would bind to unsupported devices.
	*/

	/* Unused bits */
	conf = i2c_smbus_read_byte_data(new_client, 1);
	if (conf & 0xe0)
	return -ENODEV;

	/* First check for LM75A */
	if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
	/* LM75A returns 0xff on unused registers so
	just to be sure we check for that too. */
	if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
	\|\| i2c_smbus_read_byte_data(new_client, 5) != 0xff
	\|\| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
	return -ENODEV;
	is_lm75a = 1;
	hyst = i2c_smbus_read_byte_data(new_client, 2);
	os = i2c_smbus_read_byte_data(new_client, 3);
	} else { /* Traditional style LM75 detection */
	/* Unused addresses */
	hyst = i2c_smbus_read_byte_data(new_client, 2);
	if (i2c_smbus_read_byte_data(new_client, 4) != hyst
	\|\| i2c_smbus_read_byte_data(new_client, 5) != hyst
	\|\| i2c_smbus_read_byte_data(new_client, 6) != hyst
	\|\| i2c_smbus_read_byte_data(new_client, 7) != hyst)
	return -ENODEV;
	os = i2c_smbus_read_byte_data(new_client, 3);
	if (i2c_smbus_read_byte_data(new_client, 4) != os
	\|\| i2c_smbus_read_byte_data(new_client, 5) != os
	\|\| i2c_smbus_read_byte_data(new_client, 6) != os
	\|\| i2c_smbus_read_byte_data(new_client, 7) != os)
	return -ENODEV;
	}
	/*
	* It is very unlikely that this is a LM75 if both
	* hysteresis and temperature limit registers are 0.
	*/
	if (hyst == 0 && os == 0)
	return -ENODEV;

	/* Addresses cycling */
	for (i = 8; i <= 248; i += 40) {
	if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
	\|\| i2c_smbus_read_byte_data(new_client, i + 2) != hyst
	\|\| i2c_smbus_read_byte_data(new_client, i + 3) != os)
	return -ENODEV;
	if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
	!= LM75A_ID)
	return -ENODEV;
	}

	strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);

	return 0;
	}

	#ifdef CONFIG_PM
	static int lm75_suspend(struct device *dev)
	{
	int status;
	struct i2c_client *client = to_i2c_client(dev);
	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
	if (status < 0) {
	dev_dbg(&client->dev, "Can't read config? %d\n", status);
	return status;
	}
	status = status \| LM75_SHUTDOWN;
	i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
	return 0;
	}

	static int lm75_resume(struct device *dev)
	{
	int status;
	struct i2c_client *client = to_i2c_client(dev);
	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
	if (status < 0) {
	dev_dbg(&client->dev, "Can't read config? %d\n", status);
	return status;
	}
	status = status & ~LM75_SHUTDOWN;
	i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
	return 0;
	}

	static const struct dev_pm_ops lm75_dev_pm_ops = {
	.suspend = lm75_suspend,
	.resume = lm75_resume,
	};
	#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
	#else
	#define LM75_DEV_PM_OPS NULL
	#endif /* CONFIG_PM */

	static struct i2c_driver lm75_driver = {
	.class = I2C_CLASS_HWMON,
	.driver = {
	.name = "lm75",
	.of_match_table = of_match_ptr(lm75_of_match),
	.pm = LM75_DEV_PM_OPS,
	},
	.probe = lm75_probe,
	.id_table = lm75_ids,
	.detect = lm75_detect,
	.address_list = normal_i2c,
	};

	module_i2c_driver(lm75_driver);

	MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
	MODULE_DESCRIPTION("LM75 driver");
	MODULE_LICENSE("GPL");