|  | /* | 
|  | *  Copyright (C) 1997-1998	Mark Lord | 
|  | *  Copyright (C) 2003		Red Hat | 
|  | * | 
|  | *  Some code was moved here from ide.c, see it for original copyrights. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This is the /proc/ide/ filesystem implementation. | 
|  | * | 
|  | * Drive/Driver settings can be retrieved by reading the drive's | 
|  | * "settings" files.  e.g.    "cat /proc/ide0/hda/settings" | 
|  | * To write a new value "val" into a specific setting "name", use: | 
|  | *   echo "name:val" >/proc/ide/ide0/hda/settings | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/stat.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/ide.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  |  | 
|  | static struct proc_dir_entry *proc_ide_root; | 
|  |  | 
|  | static int ide_imodel_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_hwif_t	*hwif = (ide_hwif_t *) m->private; | 
|  | const char	*name; | 
|  |  | 
|  | switch (hwif->chipset) { | 
|  | case ide_generic:	name = "generic";	break; | 
|  | case ide_pci:		name = "pci";		break; | 
|  | case ide_cmd640:	name = "cmd640";	break; | 
|  | case ide_dtc2278:	name = "dtc2278";	break; | 
|  | case ide_ali14xx:	name = "ali14xx";	break; | 
|  | case ide_qd65xx:	name = "qd65xx";	break; | 
|  | case ide_umc8672:	name = "umc8672";	break; | 
|  | case ide_ht6560b:	name = "ht6560b";	break; | 
|  | case ide_4drives:	name = "4drives";	break; | 
|  | case ide_pmac:		name = "mac-io";	break; | 
|  | case ide_au1xxx:	name = "au1xxx";	break; | 
|  | case ide_palm3710:      name = "palm3710";      break; | 
|  | case ide_acorn:		name = "acorn";		break; | 
|  | default:		name = "(unknown)";	break; | 
|  | } | 
|  | seq_printf(m, "%s\n", name); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_mate_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_hwif_t	*hwif = (ide_hwif_t *) m->private; | 
|  |  | 
|  | if (hwif && hwif->mate) | 
|  | seq_printf(m, "%s\n", hwif->mate->name); | 
|  | else | 
|  | seq_printf(m, "(none)\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_channel_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_hwif_t	*hwif = (ide_hwif_t *) m->private; | 
|  |  | 
|  | seq_printf(m, "%c\n", hwif->channel ? '1' : '0'); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_identify_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_drive_t *drive = (ide_drive_t *)m->private; | 
|  | u8 *buf; | 
|  |  | 
|  | if (!drive) { | 
|  | seq_putc(m, '\n'); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  | if (taskfile_lib_get_identify(drive, buf) == 0) { | 
|  | __le16 *val = (__le16 *)buf; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < SECTOR_SIZE / 2; i++) { | 
|  | seq_printf(m, "%04x%c", le16_to_cpu(val[i]), | 
|  | (i % 8) == 7 ? '\n' : ' '); | 
|  | } | 
|  | } else | 
|  | seq_putc(m, buf[0]); | 
|  | kfree(buf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ide_find_setting	-	find a specific setting | 
|  | *	@st: setting table pointer | 
|  | *	@name: setting name | 
|  | * | 
|  | *	Scan's the setting table for a matching entry and returns | 
|  | *	this or NULL if no entry is found. The caller must hold the | 
|  | *	setting semaphore | 
|  | */ | 
|  |  | 
|  | static | 
|  | const struct ide_proc_devset *ide_find_setting(const struct ide_proc_devset *st, | 
|  | char *name) | 
|  | { | 
|  | while (st->name) { | 
|  | if (strcmp(st->name, name) == 0) | 
|  | break; | 
|  | st++; | 
|  | } | 
|  | return st->name ? st : NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ide_read_setting	-	read an IDE setting | 
|  | *	@drive: drive to read from | 
|  | *	@setting: drive setting | 
|  | * | 
|  | *	Read a drive setting and return the value. The caller | 
|  | *	must hold the ide_setting_mtx when making this call. | 
|  | * | 
|  | *	BUGS: the data return and error are the same return value | 
|  | *	so an error -EINVAL and true return of the same value cannot | 
|  | *	be told apart | 
|  | */ | 
|  |  | 
|  | static int ide_read_setting(ide_drive_t *drive, | 
|  | const struct ide_proc_devset *setting) | 
|  | { | 
|  | const struct ide_devset *ds = setting->setting; | 
|  | int val = -EINVAL; | 
|  |  | 
|  | if (ds->get) | 
|  | val = ds->get(drive); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ide_write_setting	-	read an IDE setting | 
|  | *	@drive: drive to read from | 
|  | *	@setting: drive setting | 
|  | *	@val: value | 
|  | * | 
|  | *	Write a drive setting if it is possible. The caller | 
|  | *	must hold the ide_setting_mtx when making this call. | 
|  | * | 
|  | *	BUGS: the data return and error are the same return value | 
|  | *	so an error -EINVAL and true return of the same value cannot | 
|  | *	be told apart | 
|  | * | 
|  | *	FIXME:  This should be changed to enqueue a special request | 
|  | *	to the driver to change settings, and then wait on a sema for completion. | 
|  | *	The current scheme of polling is kludgy, though safe enough. | 
|  | */ | 
|  |  | 
|  | static int ide_write_setting(ide_drive_t *drive, | 
|  | const struct ide_proc_devset *setting, int val) | 
|  | { | 
|  | const struct ide_devset *ds = setting->setting; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  | if (!ds->set) | 
|  | return -EPERM; | 
|  | if ((ds->flags & DS_SYNC) | 
|  | && (val < setting->min || val > setting->max)) | 
|  | return -EINVAL; | 
|  | return ide_devset_execute(drive, ds, val); | 
|  | } | 
|  |  | 
|  | ide_devset_get(xfer_rate, current_speed); | 
|  |  | 
|  | static int set_xfer_rate (ide_drive_t *drive, int arg) | 
|  | { | 
|  | struct ide_cmd cmd; | 
|  |  | 
|  | if (arg < XFER_PIO_0 || arg > XFER_UDMA_6) | 
|  | return -EINVAL; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.tf.command = ATA_CMD_SET_FEATURES; | 
|  | cmd.tf.feature = SETFEATURES_XFER; | 
|  | cmd.tf.nsect   = (u8)arg; | 
|  | cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; | 
|  | cmd.valid.in.tf  = IDE_VALID_NSECT; | 
|  | cmd.tf_flags   = IDE_TFLAG_SET_XFER; | 
|  |  | 
|  | return ide_no_data_taskfile(drive, &cmd); | 
|  | } | 
|  |  | 
|  | ide_devset_rw(current_speed, xfer_rate); | 
|  | ide_devset_rw_field(init_speed, init_speed); | 
|  | ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1); | 
|  | ide_devset_rw_field(number, dn); | 
|  |  | 
|  | static const struct ide_proc_devset ide_generic_settings[] = { | 
|  | IDE_PROC_DEVSET(current_speed, 0, 70), | 
|  | IDE_PROC_DEVSET(init_speed, 0, 70), | 
|  | IDE_PROC_DEVSET(io_32bit,  0, 1 + (SUPPORT_VLB_SYNC << 1)), | 
|  | IDE_PROC_DEVSET(keepsettings, 0, 1), | 
|  | IDE_PROC_DEVSET(nice1, 0, 1), | 
|  | IDE_PROC_DEVSET(number, 0, 3), | 
|  | IDE_PROC_DEVSET(pio_mode, 0, 255), | 
|  | IDE_PROC_DEVSET(unmaskirq, 0, 1), | 
|  | IDE_PROC_DEVSET(using_dma, 0, 1), | 
|  | { NULL }, | 
|  | }; | 
|  |  | 
|  | static void proc_ide_settings_warn(void) | 
|  | { | 
|  | printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is " | 
|  | "obsolete, and will be removed soon!\n"); | 
|  | } | 
|  |  | 
|  | static int ide_settings_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | const struct ide_proc_devset *setting, *g, *d; | 
|  | const struct ide_devset *ds; | 
|  | ide_drive_t	*drive = (ide_drive_t *) m->private; | 
|  | int		rc, mul_factor, div_factor; | 
|  |  | 
|  | proc_ide_settings_warn(); | 
|  |  | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | g = ide_generic_settings; | 
|  | d = drive->settings; | 
|  | seq_printf(m, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); | 
|  | seq_printf(m, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); | 
|  | while (g->name || (d && d->name)) { | 
|  | /* read settings in the alphabetical order */ | 
|  | if (g->name && d && d->name) { | 
|  | if (strcmp(d->name, g->name) < 0) | 
|  | setting = d++; | 
|  | else | 
|  | setting = g++; | 
|  | } else if (d && d->name) { | 
|  | setting = d++; | 
|  | } else | 
|  | setting = g++; | 
|  | mul_factor = setting->mulf ? setting->mulf(drive) : 1; | 
|  | div_factor = setting->divf ? setting->divf(drive) : 1; | 
|  | seq_printf(m, "%-24s", setting->name); | 
|  | rc = ide_read_setting(drive, setting); | 
|  | if (rc >= 0) | 
|  | seq_printf(m, "%-16d", rc * mul_factor / div_factor); | 
|  | else | 
|  | seq_printf(m, "%-16s", "write-only"); | 
|  | seq_printf(m, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); | 
|  | ds = setting->setting; | 
|  | if (ds->get) | 
|  | seq_printf(m, "r"); | 
|  | if (ds->set) | 
|  | seq_printf(m, "w"); | 
|  | seq_printf(m, "\n"); | 
|  | } | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_settings_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, ide_settings_proc_show, PDE_DATA(inode)); | 
|  | } | 
|  |  | 
|  | #define MAX_LEN	30 | 
|  |  | 
|  | static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer, | 
|  | size_t count, loff_t *pos) | 
|  | { | 
|  | ide_drive_t	*drive = PDE_DATA(file_inode(file)); | 
|  | char		name[MAX_LEN + 1]; | 
|  | int		for_real = 0, mul_factor, div_factor; | 
|  | unsigned long	n; | 
|  |  | 
|  | const struct ide_proc_devset *setting; | 
|  | char *buf, *s; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | proc_ide_settings_warn(); | 
|  |  | 
|  | if (count >= PAGE_SIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | s = buf = (char *)__get_free_page(GFP_USER); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (copy_from_user(buf, buffer, count)) { | 
|  | free_page((unsigned long)buf); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | buf[count] = '\0'; | 
|  |  | 
|  | /* | 
|  | * Skip over leading whitespace | 
|  | */ | 
|  | while (count && isspace(*s)) { | 
|  | --count; | 
|  | ++s; | 
|  | } | 
|  | /* | 
|  | * Do one full pass to verify all parameters, | 
|  | * then do another to actually write the new settings. | 
|  | */ | 
|  | do { | 
|  | char *p = s; | 
|  | n = count; | 
|  | while (n > 0) { | 
|  | unsigned val; | 
|  | char *q = p; | 
|  |  | 
|  | while (n > 0 && *p != ':') { | 
|  | --n; | 
|  | p++; | 
|  | } | 
|  | if (*p != ':') | 
|  | goto parse_error; | 
|  | if (p - q > MAX_LEN) | 
|  | goto parse_error; | 
|  | memcpy(name, q, p - q); | 
|  | name[p - q] = 0; | 
|  |  | 
|  | if (n > 0) { | 
|  | --n; | 
|  | p++; | 
|  | } else | 
|  | goto parse_error; | 
|  |  | 
|  | val = simple_strtoul(p, &q, 10); | 
|  | n -= q - p; | 
|  | p = q; | 
|  | if (n > 0 && !isspace(*p)) | 
|  | goto parse_error; | 
|  | while (n > 0 && isspace(*p)) { | 
|  | --n; | 
|  | ++p; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | /* generic settings first, then driver specific ones */ | 
|  | setting = ide_find_setting(ide_generic_settings, name); | 
|  | if (!setting) { | 
|  | if (drive->settings) | 
|  | setting = ide_find_setting(drive->settings, name); | 
|  | if (!setting) { | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | goto parse_error; | 
|  | } | 
|  | } | 
|  | if (for_real) { | 
|  | mul_factor = setting->mulf ? setting->mulf(drive) : 1; | 
|  | div_factor = setting->divf ? setting->divf(drive) : 1; | 
|  | ide_write_setting(drive, setting, val * div_factor / mul_factor); | 
|  | } | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | } | 
|  | } while (!for_real++); | 
|  | free_page((unsigned long)buf); | 
|  | return count; | 
|  | parse_error: | 
|  | free_page((unsigned long)buf); | 
|  | printk("%s(): parse error\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static const struct file_operations ide_settings_proc_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= ide_settings_proc_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | .write		= ide_settings_proc_write, | 
|  | }; | 
|  |  | 
|  | int ide_capacity_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | seq_printf(m, "%llu\n", (long long)0x7fffffff); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_capacity_proc_show); | 
|  |  | 
|  | int ide_geometry_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *) m->private; | 
|  |  | 
|  | seq_printf(m, "physical     %d/%d/%d\n", | 
|  | drive->cyl, drive->head, drive->sect); | 
|  | seq_printf(m, "logical      %d/%d/%d\n", | 
|  | drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ide_geometry_proc_show); | 
|  |  | 
|  | static int ide_dmodel_proc_show(struct seq_file *seq, void *v) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *) seq->private; | 
|  | char		*m = (char *)&drive->id[ATA_ID_PROD]; | 
|  |  | 
|  | seq_printf(seq, "%.40s\n", m[0] ? m : "(none)"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_driver_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_drive_t		*drive = (ide_drive_t *)m->private; | 
|  | struct device		*dev = &drive->gendev; | 
|  | struct ide_driver	*ide_drv; | 
|  |  | 
|  | if (dev->driver) { | 
|  | ide_drv = to_ide_driver(dev->driver); | 
|  | seq_printf(m, "%s version %s\n", | 
|  | dev->driver->name, ide_drv->version); | 
|  | } else | 
|  | seq_printf(m, "ide-default version 0.9.newide\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_media_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *) m->private; | 
|  | const char	*media; | 
|  |  | 
|  | switch (drive->media) { | 
|  | case ide_disk:		media = "disk\n";	break; | 
|  | case ide_cdrom:		media = "cdrom\n";	break; | 
|  | case ide_tape:		media = "tape\n";	break; | 
|  | case ide_floppy:	media = "floppy\n";	break; | 
|  | case ide_optical:	media = "optical\n";	break; | 
|  | default:		media = "UNKNOWN\n";	break; | 
|  | } | 
|  | seq_puts(m, media); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_media_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, ide_media_proc_show, PDE_DATA(inode)); | 
|  | } | 
|  |  | 
|  | static const struct file_operations ide_media_proc_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= ide_media_proc_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static ide_proc_entry_t generic_drive_entries[] = { | 
|  | { "driver",	S_IFREG|S_IRUGO,	 ide_driver_proc_show	}, | 
|  | { "identify",	S_IFREG|S_IRUSR,	 ide_identify_proc_show	}, | 
|  | { "media",	S_IFREG|S_IRUGO,	 ide_media_proc_show	}, | 
|  | { "model",	S_IFREG|S_IRUGO,	 ide_dmodel_proc_show	}, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) | 
|  | { | 
|  | struct proc_dir_entry *ent; | 
|  |  | 
|  | if (!dir || !p) | 
|  | return; | 
|  | while (p->name != NULL) { | 
|  | ent = proc_create_single_data(p->name, p->mode, dir, p->show, data); | 
|  | if (!ent) return; | 
|  | p++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) | 
|  | { | 
|  | if (!dir || !p) | 
|  | return; | 
|  | while (p->name != NULL) { | 
|  | remove_proc_entry(p->name, dir); | 
|  | p++; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ide_proc_register_driver(ide_drive_t *drive, struct ide_driver *driver) | 
|  | { | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | drive->settings = driver->proc_devsets(drive); | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  |  | 
|  | ide_add_proc_entries(drive->proc, driver->proc_entries(drive), drive); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(ide_proc_register_driver); | 
|  |  | 
|  | /** | 
|  | *	ide_proc_unregister_driver	-	remove driver specific data | 
|  | *	@drive: drive | 
|  | *	@driver: driver | 
|  | * | 
|  | *	Clean up the driver specific /proc files and IDE settings | 
|  | *	for a given drive. | 
|  | * | 
|  | *	Takes ide_setting_mtx. | 
|  | */ | 
|  |  | 
|  | void ide_proc_unregister_driver(ide_drive_t *drive, struct ide_driver *driver) | 
|  | { | 
|  | ide_remove_proc_entries(drive->proc, driver->proc_entries(drive)); | 
|  |  | 
|  | mutex_lock(&ide_setting_mtx); | 
|  | /* | 
|  | * ide_setting_mtx protects both the settings list and the use | 
|  | * of settings (we cannot take a setting out that is being used). | 
|  | */ | 
|  | drive->settings = NULL; | 
|  | mutex_unlock(&ide_setting_mtx); | 
|  | } | 
|  | EXPORT_SYMBOL(ide_proc_unregister_driver); | 
|  |  | 
|  | void ide_proc_port_register_devices(ide_hwif_t *hwif) | 
|  | { | 
|  | struct proc_dir_entry *ent; | 
|  | struct proc_dir_entry *parent = hwif->proc; | 
|  | ide_drive_t *drive; | 
|  | char name[64]; | 
|  | int i; | 
|  |  | 
|  | ide_port_for_each_dev(i, drive, hwif) { | 
|  | if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) | 
|  | continue; | 
|  |  | 
|  | drive->proc = proc_mkdir(drive->name, parent); | 
|  | if (drive->proc) { | 
|  | ide_add_proc_entries(drive->proc, generic_drive_entries, drive); | 
|  | proc_create_data("settings", S_IFREG|S_IRUSR|S_IWUSR, | 
|  | drive->proc, &ide_settings_proc_fops, | 
|  | drive); | 
|  | } | 
|  | sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name); | 
|  | ent = proc_symlink(drive->name, proc_ide_root, name); | 
|  | if (!ent) return; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ide_proc_unregister_device(ide_drive_t *drive) | 
|  | { | 
|  | if (drive->proc) { | 
|  | remove_proc_entry("settings", drive->proc); | 
|  | ide_remove_proc_entries(drive->proc, generic_drive_entries); | 
|  | remove_proc_entry(drive->name, proc_ide_root); | 
|  | remove_proc_entry(drive->name, drive->hwif->proc); | 
|  | drive->proc = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static ide_proc_entry_t hwif_entries[] = { | 
|  | { "channel",	S_IFREG|S_IRUGO,	ide_channel_proc_show	}, | 
|  | { "mate",	S_IFREG|S_IRUGO,	ide_mate_proc_show	}, | 
|  | { "model",	S_IFREG|S_IRUGO,	ide_imodel_proc_show	}, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | void ide_proc_register_port(ide_hwif_t *hwif) | 
|  | { | 
|  | if (!hwif->proc) { | 
|  | hwif->proc = proc_mkdir(hwif->name, proc_ide_root); | 
|  |  | 
|  | if (!hwif->proc) | 
|  | return; | 
|  |  | 
|  | ide_add_proc_entries(hwif->proc, hwif_entries, hwif); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ide_proc_unregister_port(ide_hwif_t *hwif) | 
|  | { | 
|  | if (hwif->proc) { | 
|  | ide_remove_proc_entries(hwif->proc, hwif_entries); | 
|  | remove_proc_entry(hwif->name, proc_ide_root); | 
|  | hwif->proc = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int proc_print_driver(struct device_driver *drv, void *data) | 
|  | { | 
|  | struct ide_driver *ide_drv = to_ide_driver(drv); | 
|  | struct seq_file *s = data; | 
|  |  | 
|  | seq_printf(s, "%s version %s\n", drv->name, ide_drv->version); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_drivers_show(struct seq_file *s, void *p) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); | 
|  | if (err < 0) | 
|  | printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", | 
|  | __func__, err); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ide_drivers_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, &ide_drivers_show, NULL); | 
|  | } | 
|  |  | 
|  | static const struct file_operations ide_drivers_operations = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= ide_drivers_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | void proc_ide_create(void) | 
|  | { | 
|  | proc_ide_root = proc_mkdir("ide", NULL); | 
|  |  | 
|  | if (!proc_ide_root) | 
|  | return; | 
|  |  | 
|  | proc_create("drivers", 0, proc_ide_root, &ide_drivers_operations); | 
|  | } | 
|  |  | 
|  | void proc_ide_destroy(void) | 
|  | { | 
|  | remove_proc_entry("drivers", proc_ide_root); | 
|  | remove_proc_entry("ide", NULL); | 
|  | } |