| /* | 
 |  * Copyright (C) 2005-2006 Micronas USA Inc. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License (Version 2) as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/videodev2.h> | 
 | #include <media/tuner.h> | 
 | #include <media/v4l2-common.h> | 
 | #include <media/v4l2-ioctl.h> | 
 | #include <media/v4l2-device.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | MODULE_DESCRIPTION("sony-btf-mpx driver"); | 
 | MODULE_LICENSE("GPL v2"); | 
 |  | 
 | static int debug; | 
 | module_param(debug, int, 0644); | 
 | MODULE_PARM_DESC(debug, "debug level 0=off(default) 1=on"); | 
 |  | 
 | /* #define MPX_DEBUG */ | 
 |  | 
 | /* | 
 |  * Note: | 
 |  * | 
 |  * AS(IF/MPX) pin:      LOW      HIGH/OPEN | 
 |  * IF/MPX address:   0x42/0x40   0x43/0x44 | 
 |  */ | 
 |  | 
 |  | 
 | static int force_mpx_mode = -1; | 
 | module_param(force_mpx_mode, int, 0644); | 
 |  | 
 | struct sony_btf_mpx { | 
 | 	struct v4l2_subdev sd; | 
 | 	int mpxmode; | 
 | 	u32 audmode; | 
 | }; | 
 |  | 
 | static inline struct sony_btf_mpx *to_state(struct v4l2_subdev *sd) | 
 | { | 
 | 	return container_of(sd, struct sony_btf_mpx, sd); | 
 | } | 
 |  | 
 | static int mpx_write(struct i2c_client *client, int dev, int addr, int val) | 
 | { | 
 | 	u8 buffer[5]; | 
 | 	struct i2c_msg msg; | 
 |  | 
 | 	buffer[0] = dev; | 
 | 	buffer[1] = addr >> 8; | 
 | 	buffer[2] = addr & 0xff; | 
 | 	buffer[3] = val >> 8; | 
 | 	buffer[4] = val & 0xff; | 
 | 	msg.addr = client->addr; | 
 | 	msg.flags = 0; | 
 | 	msg.len = 5; | 
 | 	msg.buf = buffer; | 
 | 	i2c_transfer(client->adapter, &msg, 1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * MPX register values for the BTF-PG472Z: | 
 |  * | 
 |  *                                 FM_     NICAM_  SCART_ | 
 |  *          MODUS  SOURCE    ACB   PRESCAL PRESCAL PRESCAL SYSTEM  VOLUME | 
 |  *         10/0030 12/0008 12/0013 12/000E 12/0010 12/0000 10/0020 12/0000 | 
 |  *         --------------------------------------------------------------- | 
 |  * Auto     1003    0020    0100    2603    5000    XXXX    0001    7500 | 
 |  * | 
 |  * B/G | 
 |  *  Mono    1003    0020    0100    2603    5000    XXXX    0003    7500 | 
 |  *  A2      1003    0020    0100    2601    5000    XXXX    0003    7500 | 
 |  *  NICAM   1003    0120    0100    2603    5000    XXXX    0008    7500 | 
 |  * | 
 |  * I | 
 |  *  Mono    1003    0020    0100    2603    7900    XXXX    000A    7500 | 
 |  *  NICAM   1003    0120    0100    2603    7900    XXXX    000A    7500 | 
 |  * | 
 |  * D/K | 
 |  *  Mono    1003    0020    0100    2603    5000    XXXX    0004    7500 | 
 |  *  A2-1    1003    0020    0100    2601    5000    XXXX    0004    7500 | 
 |  *  A2-2    1003    0020    0100    2601    5000    XXXX    0005    7500 | 
 |  *  A2-3    1003    0020    0100    2601    5000    XXXX    0007    7500 | 
 |  *  NICAM   1003    0120    0100    2603    5000    XXXX    000B    7500 | 
 |  * | 
 |  * L/L' | 
 |  *  Mono    0003    0200    0100    7C03    5000    2200    0009    7500 | 
 |  *  NICAM   0003    0120    0100    7C03    5000    XXXX    0009    7500 | 
 |  * | 
 |  * M | 
 |  *  Mono    1003    0200    0100    2B03    5000    2B00    0002    7500 | 
 |  * | 
 |  * For Asia, replace the 0x26XX in FM_PRESCALE with 0x14XX. | 
 |  * | 
 |  * Bilingual selection in A2/NICAM: | 
 |  * | 
 |  *         High byte of SOURCE     Left chan   Right chan | 
 |  *                 0x01              MAIN         SUB | 
 |  *                 0x03              MAIN         MAIN | 
 |  *                 0x04              SUB          SUB | 
 |  * | 
 |  * Force mono in NICAM by setting the high byte of SOURCE to 0x02 (L/L') or | 
 |  * 0x00 (all other bands).  Force mono in A2 with FMONO_A2: | 
 |  * | 
 |  *                      FMONO_A2 | 
 |  *                      10/0022 | 
 |  *                      -------- | 
 |  *     Forced mono ON     07F0 | 
 |  *     Forced mono OFF    0190 | 
 |  */ | 
 |  | 
 | static const struct { | 
 | 	enum { AUD_MONO, AUD_A2, AUD_NICAM, AUD_NICAM_L } audio_mode; | 
 | 	u16 modus; | 
 | 	u16 source; | 
 | 	u16 acb; | 
 | 	u16 fm_prescale; | 
 | 	u16 nicam_prescale; | 
 | 	u16 scart_prescale; | 
 | 	u16 system; | 
 | 	u16 volume; | 
 | } mpx_audio_modes[] = { | 
 | 	/* Auto */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603, | 
 | 					0x5000, 0x0000, 0x0001, 0x7500 }, | 
 | 	/* B/G Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603, | 
 | 					0x5000, 0x0000, 0x0003, 0x7500 }, | 
 | 	/* B/G A2 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601, | 
 | 					0x5000, 0x0000, 0x0003, 0x7500 }, | 
 | 	/* B/G NICAM */ { AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603, | 
 | 					0x5000, 0x0000, 0x0008, 0x7500 }, | 
 | 	/* I Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603, | 
 | 					0x7900, 0x0000, 0x000A, 0x7500 }, | 
 | 	/* I NICAM */	{ AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603, | 
 | 					0x7900, 0x0000, 0x000A, 0x7500 }, | 
 | 	/* D/K Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603, | 
 | 					0x5000, 0x0000, 0x0004, 0x7500 }, | 
 | 	/* D/K A2-1 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601, | 
 | 					0x5000, 0x0000, 0x0004, 0x7500 }, | 
 | 	/* D/K A2-2 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601, | 
 | 					0x5000, 0x0000, 0x0005, 0x7500 }, | 
 | 	/* D/K A2-3 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601, | 
 | 					0x5000, 0x0000, 0x0007, 0x7500 }, | 
 | 	/* D/K NICAM */	{ AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603, | 
 | 					0x5000, 0x0000, 0x000B, 0x7500 }, | 
 | 	/* L/L' Mono */	{ AUD_MONO,	0x0003, 0x0200, 0x0100, 0x7C03, | 
 | 					0x5000, 0x2200, 0x0009, 0x7500 }, | 
 | 	/* L/L' NICAM */{ AUD_NICAM_L,	0x0003, 0x0120, 0x0100, 0x7C03, | 
 | 					0x5000, 0x0000, 0x0009, 0x7500 }, | 
 | }; | 
 |  | 
 | #define MPX_NUM_MODES	ARRAY_SIZE(mpx_audio_modes) | 
 |  | 
 | static int mpx_setup(struct sony_btf_mpx *t) | 
 | { | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(&t->sd); | 
 | 	u16 source = 0; | 
 | 	u8 buffer[3]; | 
 | 	struct i2c_msg msg; | 
 | 	int mode = t->mpxmode; | 
 |  | 
 | 	/* reset MPX */ | 
 | 	buffer[0] = 0x00; | 
 | 	buffer[1] = 0x80; | 
 | 	buffer[2] = 0x00; | 
 | 	msg.addr = client->addr; | 
 | 	msg.flags = 0; | 
 | 	msg.len = 3; | 
 | 	msg.buf = buffer; | 
 | 	i2c_transfer(client->adapter, &msg, 1); | 
 | 	buffer[1] = 0x00; | 
 | 	i2c_transfer(client->adapter, &msg, 1); | 
 |  | 
 | 	if (t->audmode != V4L2_TUNER_MODE_MONO) | 
 | 		mode++; | 
 |  | 
 | 	if (mpx_audio_modes[mode].audio_mode != AUD_MONO) { | 
 | 		switch (t->audmode) { | 
 | 		case V4L2_TUNER_MODE_MONO: | 
 | 			switch (mpx_audio_modes[mode].audio_mode) { | 
 | 			case AUD_A2: | 
 | 				source = mpx_audio_modes[mode].source; | 
 | 				break; | 
 | 			case AUD_NICAM: | 
 | 				source = 0x0000; | 
 | 				break; | 
 | 			case AUD_NICAM_L: | 
 | 				source = 0x0200; | 
 | 				break; | 
 | 			default: | 
 | 				break; | 
 | 			} | 
 | 			break; | 
 | 		case V4L2_TUNER_MODE_STEREO: | 
 | 			source = mpx_audio_modes[mode].source; | 
 | 			break; | 
 | 		case V4L2_TUNER_MODE_LANG1: | 
 | 			source = 0x0300; | 
 | 			break; | 
 | 		case V4L2_TUNER_MODE_LANG2: | 
 | 			source = 0x0400; | 
 | 			break; | 
 | 		} | 
 | 		source |= mpx_audio_modes[mode].source & 0x00ff; | 
 | 	} else | 
 | 		source = mpx_audio_modes[mode].source; | 
 |  | 
 | 	mpx_write(client, 0x10, 0x0030, mpx_audio_modes[mode].modus); | 
 | 	mpx_write(client, 0x12, 0x0008, source); | 
 | 	mpx_write(client, 0x12, 0x0013, mpx_audio_modes[mode].acb); | 
 | 	mpx_write(client, 0x12, 0x000e, | 
 | 			mpx_audio_modes[mode].fm_prescale); | 
 | 	mpx_write(client, 0x12, 0x0010, | 
 | 			mpx_audio_modes[mode].nicam_prescale); | 
 | 	mpx_write(client, 0x12, 0x000d, | 
 | 			mpx_audio_modes[mode].scart_prescale); | 
 | 	mpx_write(client, 0x10, 0x0020, mpx_audio_modes[mode].system); | 
 | 	mpx_write(client, 0x12, 0x0000, mpx_audio_modes[mode].volume); | 
 | 	if (mpx_audio_modes[mode].audio_mode == AUD_A2) | 
 | 		mpx_write(client, 0x10, 0x0022, | 
 | 			t->audmode == V4L2_TUNER_MODE_MONO ? 0x07f0 : 0x0190); | 
 |  | 
 | #ifdef MPX_DEBUG | 
 | 	{ | 
 | 		u8 buf1[3], buf2[2]; | 
 | 		struct i2c_msg msgs[2]; | 
 |  | 
 | 		v4l2_info(client, | 
 | 			"MPX registers: %04x %04x %04x %04x %04x %04x %04x %04x\n", | 
 | 			mpx_audio_modes[mode].modus, | 
 | 			source, | 
 | 			mpx_audio_modes[mode].acb, | 
 | 			mpx_audio_modes[mode].fm_prescale, | 
 | 			mpx_audio_modes[mode].nicam_prescale, | 
 | 			mpx_audio_modes[mode].scart_prescale, | 
 | 			mpx_audio_modes[mode].system, | 
 | 			mpx_audio_modes[mode].volume); | 
 | 		buf1[0] = 0x11; | 
 | 		buf1[1] = 0x00; | 
 | 		buf1[2] = 0x7e; | 
 | 		msgs[0].addr = client->addr; | 
 | 		msgs[0].flags = 0; | 
 | 		msgs[0].len = 3; | 
 | 		msgs[0].buf = buf1; | 
 | 		msgs[1].addr = client->addr; | 
 | 		msgs[1].flags = I2C_M_RD; | 
 | 		msgs[1].len = 2; | 
 | 		msgs[1].buf = buf2; | 
 | 		i2c_transfer(client->adapter, msgs, 2); | 
 | 		v4l2_info(client, "MPX system: %02x%02x\n", | 
 | 				buf2[0], buf2[1]); | 
 | 		buf1[0] = 0x11; | 
 | 		buf1[1] = 0x02; | 
 | 		buf1[2] = 0x00; | 
 | 		i2c_transfer(client->adapter, msgs, 2); | 
 | 		v4l2_info(client, "MPX status: %02x%02x\n", | 
 | 				buf2[0], buf2[1]); | 
 | 	} | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int sony_btf_mpx_s_std(struct v4l2_subdev *sd, v4l2_std_id std) | 
 | { | 
 | 	struct sony_btf_mpx *t = to_state(sd); | 
 | 	int default_mpx_mode = 0; | 
 |  | 
 | 	if (std & V4L2_STD_PAL_BG) | 
 | 		default_mpx_mode = 1; | 
 | 	else if (std & V4L2_STD_PAL_I) | 
 | 		default_mpx_mode = 4; | 
 | 	else if (std & V4L2_STD_PAL_DK) | 
 | 		default_mpx_mode = 6; | 
 | 	else if (std & V4L2_STD_SECAM_L) | 
 | 		default_mpx_mode = 11; | 
 |  | 
 | 	if (default_mpx_mode != t->mpxmode) { | 
 | 		t->mpxmode = default_mpx_mode; | 
 | 		mpx_setup(t); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sony_btf_mpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) | 
 | { | 
 | 	struct sony_btf_mpx *t = to_state(sd); | 
 |  | 
 | 	vt->capability = V4L2_TUNER_CAP_NORM | | 
 | 		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | | 
 | 		V4L2_TUNER_CAP_LANG2; | 
 | 	vt->rxsubchans = V4L2_TUNER_SUB_MONO | | 
 | 		V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | | 
 | 		V4L2_TUNER_SUB_LANG2; | 
 | 	vt->audmode = t->audmode; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sony_btf_mpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) | 
 | { | 
 | 	struct sony_btf_mpx *t = to_state(sd); | 
 |  | 
 | 	if (vt->type != V4L2_TUNER_ANALOG_TV) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (vt->audmode != t->audmode) { | 
 | 		t->audmode = vt->audmode; | 
 | 		mpx_setup(t); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* --------------------------------------------------------------------------*/ | 
 |  | 
 | static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = { | 
 | 	.s_tuner = sony_btf_mpx_s_tuner, | 
 | 	.g_tuner = sony_btf_mpx_g_tuner, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_video_ops sony_btf_mpx_video_ops = { | 
 | 	.s_std = sony_btf_mpx_s_std, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_ops sony_btf_mpx_ops = { | 
 | 	.tuner = &sony_btf_mpx_tuner_ops, | 
 | 	.video = &sony_btf_mpx_video_ops, | 
 | }; | 
 |  | 
 | /* --------------------------------------------------------------------------*/ | 
 |  | 
 | static int sony_btf_mpx_probe(struct i2c_client *client, | 
 | 				const struct i2c_device_id *id) | 
 | { | 
 | 	struct sony_btf_mpx *t; | 
 | 	struct v4l2_subdev *sd; | 
 |  | 
 | 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	v4l_info(client, "chip found @ 0x%x (%s)\n", | 
 | 			client->addr << 1, client->adapter->name); | 
 |  | 
 | 	t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL); | 
 | 	if (t == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	sd = &t->sd; | 
 | 	v4l2_i2c_subdev_init(sd, client, &sony_btf_mpx_ops); | 
 |  | 
 | 	/* Initialize sony_btf_mpx */ | 
 | 	t->mpxmode = 0; | 
 | 	t->audmode = V4L2_TUNER_MODE_STEREO; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sony_btf_mpx_remove(struct i2c_client *client) | 
 | { | 
 | 	struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
 |  | 
 | 	v4l2_device_unregister_subdev(sd); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------- */ | 
 |  | 
 | static const struct i2c_device_id sony_btf_mpx_id[] = { | 
 | 	{ "sony-btf-mpx", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, sony_btf_mpx_id); | 
 |  | 
 | static struct i2c_driver sony_btf_mpx_driver = { | 
 | 	.driver = { | 
 | 		.name	= "sony-btf-mpx", | 
 | 	}, | 
 | 	.probe = sony_btf_mpx_probe, | 
 | 	.remove = sony_btf_mpx_remove, | 
 | 	.id_table = sony_btf_mpx_id, | 
 | }; | 
 | module_i2c_driver(sony_btf_mpx_driver); |