| /* | 
 |  *  CLPS711X SPI bus driver | 
 |  * | 
 |  *  Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/io.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/module.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/mfd/syscon.h> | 
 | #include <linux/mfd/syscon/clps711x.h> | 
 | #include <linux/spi/spi.h> | 
 |  | 
 | #define DRIVER_NAME		"clps711x-spi" | 
 |  | 
 | #define SYNCIO_FRMLEN(x)	((x) << 8) | 
 | #define SYNCIO_TXFRMEN		(1 << 14) | 
 |  | 
 | struct spi_clps711x_data { | 
 | 	void __iomem		*syncio; | 
 | 	struct regmap		*syscon; | 
 | 	struct clk		*spi_clk; | 
 |  | 
 | 	u8			*tx_buf; | 
 | 	u8			*rx_buf; | 
 | 	unsigned int		bpw; | 
 | 	int			len; | 
 | }; | 
 |  | 
 | static int spi_clps711x_setup(struct spi_device *spi) | 
 | { | 
 | 	if (!spi->controller_state) { | 
 | 		int ret; | 
 |  | 
 | 		ret = devm_gpio_request(&spi->master->dev, spi->cs_gpio, | 
 | 					dev_name(&spi->master->dev)); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		spi->controller_state = spi; | 
 | 	} | 
 |  | 
 | 	/* We are expect that SPI-device is not selected */ | 
 | 	gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int spi_clps711x_prepare_message(struct spi_master *master, | 
 | 					struct spi_message *msg) | 
 | { | 
 | 	struct spi_clps711x_data *hw = spi_master_get_devdata(master); | 
 | 	struct spi_device *spi = msg->spi; | 
 |  | 
 | 	/* Setup mode for transfer */ | 
 | 	return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN, | 
 | 				  (spi->mode & SPI_CPHA) ? | 
 | 				  SYSCON3_ADCCKNSEN : 0); | 
 | } | 
 |  | 
 | static int spi_clps711x_transfer_one(struct spi_master *master, | 
 | 				     struct spi_device *spi, | 
 | 				     struct spi_transfer *xfer) | 
 | { | 
 | 	struct spi_clps711x_data *hw = spi_master_get_devdata(master); | 
 | 	u8 data; | 
 |  | 
 | 	clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz); | 
 |  | 
 | 	hw->len = xfer->len; | 
 | 	hw->bpw = xfer->bits_per_word; | 
 | 	hw->tx_buf = (u8 *)xfer->tx_buf; | 
 | 	hw->rx_buf = (u8 *)xfer->rx_buf; | 
 |  | 
 | 	/* Initiate transfer */ | 
 | 	data = hw->tx_buf ? *hw->tx_buf++ : 0; | 
 | 	writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) | 
 | { | 
 | 	struct spi_master *master = dev_id; | 
 | 	struct spi_clps711x_data *hw = spi_master_get_devdata(master); | 
 | 	u8 data; | 
 |  | 
 | 	/* Handle RX */ | 
 | 	data = readb(hw->syncio); | 
 | 	if (hw->rx_buf) | 
 | 		*hw->rx_buf++ = data; | 
 |  | 
 | 	/* Handle TX */ | 
 | 	if (--hw->len > 0) { | 
 | 		data = hw->tx_buf ? *hw->tx_buf++ : 0; | 
 | 		writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, | 
 | 		       hw->syncio); | 
 | 	} else | 
 | 		spi_finalize_current_transfer(master); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int spi_clps711x_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct spi_clps711x_data *hw; | 
 | 	struct spi_master *master; | 
 | 	struct resource *res; | 
 | 	int irq, ret; | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) | 
 | 		return irq; | 
 |  | 
 | 	master = spi_alloc_master(&pdev->dev, sizeof(*hw)); | 
 | 	if (!master) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	master->bus_num = -1; | 
 | 	master->mode_bits = SPI_CPHA | SPI_CS_HIGH; | 
 | 	master->bits_per_word_mask =  SPI_BPW_RANGE_MASK(1, 8); | 
 | 	master->dev.of_node = pdev->dev.of_node; | 
 | 	master->setup = spi_clps711x_setup; | 
 | 	master->prepare_message = spi_clps711x_prepare_message; | 
 | 	master->transfer_one = spi_clps711x_transfer_one; | 
 |  | 
 | 	hw = spi_master_get_devdata(master); | 
 |  | 
 | 	hw->spi_clk = devm_clk_get(&pdev->dev, NULL); | 
 | 	if (IS_ERR(hw->spi_clk)) { | 
 | 		ret = PTR_ERR(hw->spi_clk); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	hw->syscon = | 
 | 		syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3"); | 
 | 	if (IS_ERR(hw->syscon)) { | 
 | 		ret = PTR_ERR(hw->syscon); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	hw->syncio = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(hw->syncio)) { | 
 | 		ret = PTR_ERR(hw->syncio); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	/* Disable extended mode due hardware problems */ | 
 | 	regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0); | 
 |  | 
 | 	/* Clear possible pending interrupt */ | 
 | 	readl(hw->syncio); | 
 |  | 
 | 	ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0, | 
 | 			       dev_name(&pdev->dev), master); | 
 | 	if (ret) | 
 | 		goto err_out; | 
 |  | 
 | 	ret = devm_spi_register_master(&pdev->dev, master); | 
 | 	if (!ret) | 
 | 		return 0; | 
 |  | 
 | err_out: | 
 | 	spi_master_put(master); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct of_device_id clps711x_spi_dt_ids[] = { | 
 | 	{ .compatible = "cirrus,ep7209-spi", }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids); | 
 |  | 
 | static struct platform_driver clps711x_spi_driver = { | 
 | 	.driver	= { | 
 | 		.name	= DRIVER_NAME, | 
 | 		.of_match_table = clps711x_spi_dt_ids, | 
 | 	}, | 
 | 	.probe	= spi_clps711x_probe, | 
 | }; | 
 | module_platform_driver(clps711x_spi_driver); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); | 
 | MODULE_DESCRIPTION("CLPS711X SPI bus driver"); | 
 | MODULE_ALIAS("platform:" DRIVER_NAME); |