| /* | 
 |  * Broadcom STB CPU SMP and hotplug support for ARM | 
 |  * | 
 |  * Copyright (C) 2013-2014 Broadcom Corporation | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation version 2. | 
 |  * | 
 |  * This program is distributed "as is" WITHOUT ANY WARRANTY of any | 
 |  * kind, whether express or implied; without even the implied warranty | 
 |  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/printk.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/mfd/syscon.h> | 
 |  | 
 | #include <asm/cacheflush.h> | 
 | #include <asm/cp15.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/smp_plat.h> | 
 |  | 
 | enum { | 
 | 	ZONE_MAN_CLKEN_MASK		= BIT(0), | 
 | 	ZONE_MAN_RESET_CNTL_MASK	= BIT(1), | 
 | 	ZONE_MAN_MEM_PWR_MASK		= BIT(4), | 
 | 	ZONE_RESERVED_1_MASK		= BIT(5), | 
 | 	ZONE_MAN_ISO_CNTL_MASK		= BIT(6), | 
 | 	ZONE_MANUAL_CONTROL_MASK	= BIT(7), | 
 | 	ZONE_PWR_DN_REQ_MASK		= BIT(9), | 
 | 	ZONE_PWR_UP_REQ_MASK		= BIT(10), | 
 | 	ZONE_BLK_RST_ASSERT_MASK	= BIT(12), | 
 | 	ZONE_PWR_OFF_STATE_MASK		= BIT(25), | 
 | 	ZONE_PWR_ON_STATE_MASK		= BIT(26), | 
 | 	ZONE_DPG_PWR_STATE_MASK		= BIT(28), | 
 | 	ZONE_MEM_PWR_STATE_MASK		= BIT(29), | 
 | 	ZONE_RESET_STATE_MASK		= BIT(31), | 
 | 	CPU0_PWR_ZONE_CTRL_REG		= 1, | 
 | 	CPU_RESET_CONFIG_REG		= 2, | 
 | }; | 
 |  | 
 | static void __iomem *cpubiuctrl_block; | 
 | static void __iomem *hif_cont_block; | 
 | static u32 cpu0_pwr_zone_ctrl_reg; | 
 | static u32 cpu_rst_cfg_reg; | 
 | static u32 hif_cont_reg; | 
 |  | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | /* | 
 |  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because | 
 |  * one or more cache may be disabled, we must flush to ensure coherency. We | 
 |  * cannot use traditionl completion structures or spinlocks as they rely on | 
 |  * coherency. | 
 |  */ | 
 | static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); | 
 |  | 
 | static int per_cpu_sw_state_rd(u32 cpu) | 
 | { | 
 | 	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); | 
 | 	return per_cpu(per_cpu_sw_state, cpu); | 
 | } | 
 |  | 
 | static void per_cpu_sw_state_wr(u32 cpu, int val) | 
 | { | 
 | 	dmb(); | 
 | 	per_cpu(per_cpu_sw_state, cpu) = val; | 
 | 	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); | 
 | } | 
 | #else | 
 | static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } | 
 | #endif | 
 |  | 
 | static void __iomem *pwr_ctrl_get_base(u32 cpu) | 
 | { | 
 | 	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; | 
 | 	base += (cpu_logical_map(cpu) * 4); | 
 | 	return base; | 
 | } | 
 |  | 
 | static u32 pwr_ctrl_rd(u32 cpu) | 
 | { | 
 | 	void __iomem *base = pwr_ctrl_get_base(cpu); | 
 | 	return readl_relaxed(base); | 
 | } | 
 |  | 
 | static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask) | 
 | { | 
 | 	void __iomem *base = pwr_ctrl_get_base(cpu); | 
 | 	writel((readl(base) & mask) | val, base); | 
 | } | 
 |  | 
 | static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask) | 
 | { | 
 | 	void __iomem *base = pwr_ctrl_get_base(cpu); | 
 | 	writel((readl(base) & mask) & ~val, base); | 
 | } | 
 |  | 
 | #define POLL_TMOUT_MS 500 | 
 | static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask) | 
 | { | 
 | 	const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS); | 
 | 	u32 tmp; | 
 |  | 
 | 	do { | 
 | 		tmp = pwr_ctrl_rd(cpu) & mask; | 
 | 		if (!set == !tmp) | 
 | 			return 0; | 
 | 	} while (time_before(jiffies, timeo)); | 
 |  | 
 | 	tmp = pwr_ctrl_rd(cpu) & mask; | 
 | 	if (!set == !tmp) | 
 | 		return 0; | 
 |  | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | static void cpu_rst_cfg_set(u32 cpu, int set) | 
 | { | 
 | 	u32 val; | 
 | 	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); | 
 | 	if (set) | 
 | 		val |= BIT(cpu_logical_map(cpu)); | 
 | 	else | 
 | 		val &= ~BIT(cpu_logical_map(cpu)); | 
 | 	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); | 
 | } | 
 |  | 
 | static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) | 
 | { | 
 | 	const int reg_ofs = cpu_logical_map(cpu) * 8; | 
 | 	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); | 
 | 	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); | 
 | } | 
 |  | 
 | static void brcmstb_cpu_boot(u32 cpu) | 
 | { | 
 | 	/* Mark this CPU as "up" */ | 
 | 	per_cpu_sw_state_wr(cpu, 1); | 
 |  | 
 | 	/* | 
 | 	 * Set the reset vector to point to the secondary_startup | 
 | 	 * routine | 
 | 	 */ | 
 | 	cpu_set_boot_addr(cpu, __pa_symbol(secondary_startup)); | 
 |  | 
 | 	/* Unhalt the cpu */ | 
 | 	cpu_rst_cfg_set(cpu, 0); | 
 | } | 
 |  | 
 | static void brcmstb_cpu_power_on(u32 cpu) | 
 | { | 
 | 	/* | 
 | 	 * The secondary cores power was cut, so we must go through | 
 | 	 * power-on initialization. | 
 | 	 */ | 
 | 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00); | 
 | 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); | 
 | 	pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1); | 
 |  | 
 | 	pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1); | 
 |  | 
 | 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK)) | 
 | 		panic("ZONE_MEM_PWR_STATE_MASK set timeout"); | 
 |  | 
 | 	pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1); | 
 |  | 
 | 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK)) | 
 | 		panic("ZONE_DPG_PWR_STATE_MASK set timeout"); | 
 |  | 
 | 	pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); | 
 | 	pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); | 
 | } | 
 |  | 
 | static int brcmstb_cpu_get_power_state(u32 cpu) | 
 | { | 
 | 	int tmp = pwr_ctrl_rd(cpu); | 
 | 	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; | 
 | } | 
 |  | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 |  | 
 | static void brcmstb_cpu_die(u32 cpu) | 
 | { | 
 | 	v7_exit_coherency_flush(all); | 
 |  | 
 | 	per_cpu_sw_state_wr(cpu, 0); | 
 |  | 
 | 	/* Sit and wait to die */ | 
 | 	wfi(); | 
 |  | 
 | 	/* We should never get here... */ | 
 | 	while (1) | 
 | 		; | 
 | } | 
 |  | 
 | static int brcmstb_cpu_kill(u32 cpu) | 
 | { | 
 | 	/* | 
 | 	 * Ordinarily, the hardware forbids power-down of CPU0 (which is good | 
 | 	 * because it is the boot CPU), but this is not true when using BPCM | 
 | 	 * manual mode.  Consequently, we must avoid turning off CPU0 here to | 
 | 	 * ensure that TI2C master reset will work. | 
 | 	 */ | 
 | 	if (cpu == 0) { | 
 | 		pr_warn("SMP: refusing to power off CPU0\n"); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	while (per_cpu_sw_state_rd(cpu)) | 
 | 		; | 
 |  | 
 | 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); | 
 | 	pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); | 
 | 	pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1); | 
 | 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); | 
 | 	pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1); | 
 |  | 
 | 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK)) | 
 | 		panic("ZONE_MEM_PWR_STATE_MASK clear timeout"); | 
 |  | 
 | 	pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1); | 
 |  | 
 | 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK)) | 
 | 		panic("ZONE_DPG_PWR_STATE_MASK clear timeout"); | 
 |  | 
 | 	/* Flush pipeline before resetting CPU */ | 
 | 	mb(); | 
 |  | 
 | 	/* Assert reset on the CPU */ | 
 | 	cpu_rst_cfg_set(cpu, 1); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | #endif /* CONFIG_HOTPLUG_CPU */ | 
 |  | 
 | static int __init setup_hifcpubiuctrl_regs(struct device_node *np) | 
 | { | 
 | 	int rc = 0; | 
 | 	char *name; | 
 | 	struct device_node *syscon_np = NULL; | 
 |  | 
 | 	name = "syscon-cpu"; | 
 |  | 
 | 	syscon_np = of_parse_phandle(np, name, 0); | 
 | 	if (!syscon_np) { | 
 | 		pr_err("can't find phandle %s\n", name); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	cpubiuctrl_block = of_iomap(syscon_np, 0); | 
 | 	if (!cpubiuctrl_block) { | 
 | 		pr_err("iomap failed for cpubiuctrl_block\n"); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, | 
 | 					&cpu0_pwr_zone_ctrl_reg); | 
 | 	if (rc) { | 
 | 		pr_err("failed to read 1st entry from %s property (%d)\n", name, | 
 | 			rc); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, | 
 | 					&cpu_rst_cfg_reg); | 
 | 	if (rc) { | 
 | 		pr_err("failed to read 2nd entry from %s property (%d)\n", name, | 
 | 			rc); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | cleanup: | 
 | 	of_node_put(syscon_np); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int __init setup_hifcont_regs(struct device_node *np) | 
 | { | 
 | 	int rc = 0; | 
 | 	char *name; | 
 | 	struct device_node *syscon_np = NULL; | 
 |  | 
 | 	name = "syscon-cont"; | 
 |  | 
 | 	syscon_np = of_parse_phandle(np, name, 0); | 
 | 	if (!syscon_np) { | 
 | 		pr_err("can't find phandle %s\n", name); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	hif_cont_block = of_iomap(syscon_np, 0); | 
 | 	if (!hif_cont_block) { | 
 | 		pr_err("iomap failed for hif_cont_block\n"); | 
 | 		rc = -EINVAL; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	/* Offset is at top of hif_cont_block */ | 
 | 	hif_cont_reg = 0; | 
 |  | 
 | cleanup: | 
 | 	of_node_put(syscon_np); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) | 
 | { | 
 | 	int rc; | 
 | 	struct device_node *np; | 
 | 	char *name; | 
 |  | 
 | 	name = "brcm,brcmstb-smpboot"; | 
 | 	np = of_find_compatible_node(NULL, NULL, name); | 
 | 	if (!np) { | 
 | 		pr_err("can't find compatible node %s\n", name); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	rc = setup_hifcpubiuctrl_regs(np); | 
 | 	if (rc) | 
 | 		return; | 
 |  | 
 | 	rc = setup_hifcont_regs(np); | 
 | 	if (rc) | 
 | 		return; | 
 | } | 
 |  | 
 | static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) | 
 | { | 
 | 	/* Missing the brcm,brcmstb-smpboot DT node? */ | 
 | 	if (!cpubiuctrl_block || !hif_cont_block) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Bring up power to the core if necessary */ | 
 | 	if (brcmstb_cpu_get_power_state(cpu) == 0) | 
 | 		brcmstb_cpu_power_on(cpu); | 
 |  | 
 | 	brcmstb_cpu_boot(cpu); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct smp_operations brcmstb_smp_ops __initconst = { | 
 | 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup, | 
 | 	.smp_boot_secondary	= brcmstb_boot_secondary, | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | 	.cpu_kill		= brcmstb_cpu_kill, | 
 | 	.cpu_die		= brcmstb_cpu_die, | 
 | #endif | 
 | }; | 
 |  | 
 | CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); |