| /* | 
 |  * | 
 |  *  A driver for Nokia Connectivity Card DTL-1 devices | 
 |  * | 
 |  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org> | 
 |  * | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as | 
 |  *  published by the Free Software Foundation; | 
 |  * | 
 |  *  Software distributed under the License is distributed on an "AS | 
 |  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | 
 |  *  implied. See the License for the specific language governing | 
 |  *  rights and limitations under the License. | 
 |  * | 
 |  *  The initial developer of the original code is David A. Hinds | 
 |  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds | 
 |  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/types.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/moduleparam.h> | 
 |  | 
 | #include <linux/skbuff.h> | 
 | #include <linux/string.h> | 
 | #include <linux/serial.h> | 
 | #include <linux/serial_reg.h> | 
 | #include <linux/bitops.h> | 
 | #include <asm/io.h> | 
 |  | 
 | #include <pcmcia/cistpl.h> | 
 | #include <pcmcia/ciscode.h> | 
 | #include <pcmcia/ds.h> | 
 | #include <pcmcia/cisreg.h> | 
 |  | 
 | #include <net/bluetooth/bluetooth.h> | 
 | #include <net/bluetooth/hci_core.h> | 
 |  | 
 |  | 
 |  | 
 | /* ======================== Module parameters ======================== */ | 
 |  | 
 |  | 
 | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | 
 | MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 |  | 
 |  | 
 | /* ======================== Local structures ======================== */ | 
 |  | 
 |  | 
 | struct dtl1_info { | 
 | 	struct pcmcia_device *p_dev; | 
 |  | 
 | 	struct hci_dev *hdev; | 
 |  | 
 | 	spinlock_t lock;		/* For serializing operations */ | 
 |  | 
 | 	unsigned long flowmask;		/* HCI flow mask */ | 
 | 	int ri_latch; | 
 |  | 
 | 	struct sk_buff_head txq; | 
 | 	unsigned long tx_state; | 
 |  | 
 | 	unsigned long rx_state; | 
 | 	unsigned long rx_count; | 
 | 	struct sk_buff *rx_skb; | 
 | }; | 
 |  | 
 |  | 
 | static int dtl1_config(struct pcmcia_device *link); | 
 |  | 
 |  | 
 | /* Transmit states  */ | 
 | #define XMIT_SENDING  1 | 
 | #define XMIT_WAKEUP   2 | 
 | #define XMIT_WAITING  8 | 
 |  | 
 | /* Receiver States */ | 
 | #define RECV_WAIT_NSH   0 | 
 | #define RECV_WAIT_DATA  1 | 
 |  | 
 |  | 
 | struct nsh { | 
 | 	u8 type; | 
 | 	u8 zero; | 
 | 	u16 len; | 
 | } __packed;	/* Nokia Specific Header */ | 
 |  | 
 | #define NSHL  4				/* Nokia Specific Header Length */ | 
 |  | 
 |  | 
 |  | 
 | /* ======================== Interrupt handling ======================== */ | 
 |  | 
 |  | 
 | static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | 
 | { | 
 | 	int actual = 0; | 
 |  | 
 | 	/* Tx FIFO should be empty */ | 
 | 	if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) | 
 | 		return 0; | 
 |  | 
 | 	/* Fill FIFO with current frame */ | 
 | 	while ((fifo_size-- > 0) && (actual < len)) { | 
 | 		/* Transmit next byte */ | 
 | 		outb(buf[actual], iobase + UART_TX); | 
 | 		actual++; | 
 | 	} | 
 |  | 
 | 	return actual; | 
 | } | 
 |  | 
 |  | 
 | static void dtl1_write_wakeup(struct dtl1_info *info) | 
 | { | 
 | 	if (!info) { | 
 | 		BT_ERR("Unknown device"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (test_bit(XMIT_WAITING, &(info->tx_state))) { | 
 | 		set_bit(XMIT_WAKEUP, &(info->tx_state)); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { | 
 | 		set_bit(XMIT_WAKEUP, &(info->tx_state)); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	do { | 
 | 		unsigned int iobase = info->p_dev->resource[0]->start; | 
 | 		register struct sk_buff *skb; | 
 | 		int len; | 
 |  | 
 | 		clear_bit(XMIT_WAKEUP, &(info->tx_state)); | 
 |  | 
 | 		if (!pcmcia_dev_present(info->p_dev)) | 
 | 			return; | 
 |  | 
 | 		skb = skb_dequeue(&(info->txq)); | 
 | 		if (!skb) | 
 | 			break; | 
 |  | 
 | 		/* Send frame */ | 
 | 		len = dtl1_write(iobase, 32, skb->data, skb->len); | 
 |  | 
 | 		if (len == skb->len) { | 
 | 			set_bit(XMIT_WAITING, &(info->tx_state)); | 
 | 			kfree_skb(skb); | 
 | 		} else { | 
 | 			skb_pull(skb, len); | 
 | 			skb_queue_head(&(info->txq), skb); | 
 | 		} | 
 |  | 
 | 		info->hdev->stat.byte_tx += len; | 
 |  | 
 | 	} while (test_bit(XMIT_WAKEUP, &(info->tx_state))); | 
 |  | 
 | 	clear_bit(XMIT_SENDING, &(info->tx_state)); | 
 | } | 
 |  | 
 |  | 
 | static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb) | 
 | { | 
 | 	u8 flowmask = *(u8 *)skb->data; | 
 | 	int i; | 
 |  | 
 | 	printk(KERN_INFO "Bluetooth: Nokia control data ="); | 
 | 	for (i = 0; i < skb->len; i++) | 
 | 		printk(" %02x", skb->data[i]); | 
 |  | 
 | 	printk("\n"); | 
 |  | 
 | 	/* transition to active state */ | 
 | 	if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) { | 
 | 		clear_bit(XMIT_WAITING, &(info->tx_state)); | 
 | 		dtl1_write_wakeup(info); | 
 | 	} | 
 |  | 
 | 	info->flowmask = flowmask; | 
 |  | 
 | 	kfree_skb(skb); | 
 | } | 
 |  | 
 |  | 
 | static void dtl1_receive(struct dtl1_info *info) | 
 | { | 
 | 	unsigned int iobase; | 
 | 	struct nsh *nsh; | 
 | 	int boguscount = 0; | 
 |  | 
 | 	if (!info) { | 
 | 		BT_ERR("Unknown device"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	iobase = info->p_dev->resource[0]->start; | 
 |  | 
 | 	do { | 
 | 		info->hdev->stat.byte_rx++; | 
 |  | 
 | 		/* Allocate packet */ | 
 | 		if (info->rx_skb == NULL) { | 
 | 			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); | 
 | 			if (!info->rx_skb) { | 
 | 				BT_ERR("Can't allocate mem for new packet"); | 
 | 				info->rx_state = RECV_WAIT_NSH; | 
 | 				info->rx_count = NSHL; | 
 | 				return; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		skb_put_u8(info->rx_skb, inb(iobase + UART_RX)); | 
 | 		nsh = (struct nsh *)info->rx_skb->data; | 
 |  | 
 | 		info->rx_count--; | 
 |  | 
 | 		if (info->rx_count == 0) { | 
 |  | 
 | 			switch (info->rx_state) { | 
 | 			case RECV_WAIT_NSH: | 
 | 				info->rx_state = RECV_WAIT_DATA; | 
 | 				info->rx_count = nsh->len + (nsh->len & 0x0001); | 
 | 				break; | 
 | 			case RECV_WAIT_DATA: | 
 | 				hci_skb_pkt_type(info->rx_skb) = nsh->type; | 
 |  | 
 | 				/* remove PAD byte if it exists */ | 
 | 				if (nsh->len & 0x0001) { | 
 | 					info->rx_skb->tail--; | 
 | 					info->rx_skb->len--; | 
 | 				} | 
 |  | 
 | 				/* remove NSH */ | 
 | 				skb_pull(info->rx_skb, NSHL); | 
 |  | 
 | 				switch (hci_skb_pkt_type(info->rx_skb)) { | 
 | 				case 0x80: | 
 | 					/* control data for the Nokia Card */ | 
 | 					dtl1_control(info, info->rx_skb); | 
 | 					break; | 
 | 				case 0x82: | 
 | 				case 0x83: | 
 | 				case 0x84: | 
 | 					/* send frame to the HCI layer */ | 
 | 					hci_skb_pkt_type(info->rx_skb) &= 0x0f; | 
 | 					hci_recv_frame(info->hdev, info->rx_skb); | 
 | 					break; | 
 | 				default: | 
 | 					/* unknown packet */ | 
 | 					BT_ERR("Unknown HCI packet with type 0x%02x received", | 
 | 					       hci_skb_pkt_type(info->rx_skb)); | 
 | 					kfree_skb(info->rx_skb); | 
 | 					break; | 
 | 				} | 
 |  | 
 | 				info->rx_state = RECV_WAIT_NSH; | 
 | 				info->rx_count = NSHL; | 
 | 				info->rx_skb = NULL; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 		} | 
 |  | 
 | 		/* Make sure we don't stay here too long */ | 
 | 		if (boguscount++ > 32) | 
 | 			break; | 
 |  | 
 | 	} while (inb(iobase + UART_LSR) & UART_LSR_DR); | 
 | } | 
 |  | 
 |  | 
 | static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) | 
 | { | 
 | 	struct dtl1_info *info = dev_inst; | 
 | 	unsigned int iobase; | 
 | 	unsigned char msr; | 
 | 	int boguscount = 0; | 
 | 	int iir, lsr; | 
 | 	irqreturn_t r = IRQ_NONE; | 
 |  | 
 | 	if (!info || !info->hdev) | 
 | 		/* our irq handler is shared */ | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	iobase = info->p_dev->resource[0]->start; | 
 |  | 
 | 	spin_lock(&(info->lock)); | 
 |  | 
 | 	iir = inb(iobase + UART_IIR) & UART_IIR_ID; | 
 | 	while (iir) { | 
 |  | 
 | 		r = IRQ_HANDLED; | 
 | 		/* Clear interrupt */ | 
 | 		lsr = inb(iobase + UART_LSR); | 
 |  | 
 | 		switch (iir) { | 
 | 		case UART_IIR_RLSI: | 
 | 			BT_ERR("RLSI"); | 
 | 			break; | 
 | 		case UART_IIR_RDI: | 
 | 			/* Receive interrupt */ | 
 | 			dtl1_receive(info); | 
 | 			break; | 
 | 		case UART_IIR_THRI: | 
 | 			if (lsr & UART_LSR_THRE) { | 
 | 				/* Transmitter ready for data */ | 
 | 				dtl1_write_wakeup(info); | 
 | 			} | 
 | 			break; | 
 | 		default: | 
 | 			BT_ERR("Unhandled IIR=%#x", iir); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Make sure we don't stay here too long */ | 
 | 		if (boguscount++ > 100) | 
 | 			break; | 
 |  | 
 | 		iir = inb(iobase + UART_IIR) & UART_IIR_ID; | 
 |  | 
 | 	} | 
 |  | 
 | 	msr = inb(iobase + UART_MSR); | 
 |  | 
 | 	if (info->ri_latch ^ (msr & UART_MSR_RI)) { | 
 | 		info->ri_latch = msr & UART_MSR_RI; | 
 | 		clear_bit(XMIT_WAITING, &(info->tx_state)); | 
 | 		dtl1_write_wakeup(info); | 
 | 		r = IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	spin_unlock(&(info->lock)); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* ======================== HCI interface ======================== */ | 
 |  | 
 |  | 
 | static int dtl1_hci_open(struct hci_dev *hdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int dtl1_hci_flush(struct hci_dev *hdev) | 
 | { | 
 | 	struct dtl1_info *info = hci_get_drvdata(hdev); | 
 |  | 
 | 	/* Drop TX queue */ | 
 | 	skb_queue_purge(&(info->txq)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int dtl1_hci_close(struct hci_dev *hdev) | 
 | { | 
 | 	dtl1_hci_flush(hdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) | 
 | { | 
 | 	struct dtl1_info *info = hci_get_drvdata(hdev); | 
 | 	struct sk_buff *s; | 
 | 	struct nsh nsh; | 
 |  | 
 | 	switch (hci_skb_pkt_type(skb)) { | 
 | 	case HCI_COMMAND_PKT: | 
 | 		hdev->stat.cmd_tx++; | 
 | 		nsh.type = 0x81; | 
 | 		break; | 
 | 	case HCI_ACLDATA_PKT: | 
 | 		hdev->stat.acl_tx++; | 
 | 		nsh.type = 0x82; | 
 | 		break; | 
 | 	case HCI_SCODATA_PKT: | 
 | 		hdev->stat.sco_tx++; | 
 | 		nsh.type = 0x83; | 
 | 		break; | 
 | 	default: | 
 | 		return -EILSEQ; | 
 | 	} | 
 |  | 
 | 	nsh.zero = 0; | 
 | 	nsh.len = skb->len; | 
 |  | 
 | 	s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC); | 
 | 	if (!s) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	skb_reserve(s, NSHL); | 
 | 	skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len); | 
 | 	if (skb->len & 0x0001) | 
 | 		skb_put_u8(s, 0);	/* PAD */ | 
 |  | 
 | 	/* Prepend skb with Nokia frame header and queue */ | 
 | 	memcpy(skb_push(s, NSHL), &nsh, NSHL); | 
 | 	skb_queue_tail(&(info->txq), s); | 
 |  | 
 | 	dtl1_write_wakeup(info); | 
 |  | 
 | 	kfree_skb(skb); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* ======================== Card services HCI interaction ======================== */ | 
 |  | 
 |  | 
 | static int dtl1_open(struct dtl1_info *info) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned int iobase = info->p_dev->resource[0]->start; | 
 | 	struct hci_dev *hdev; | 
 |  | 
 | 	spin_lock_init(&(info->lock)); | 
 |  | 
 | 	skb_queue_head_init(&(info->txq)); | 
 |  | 
 | 	info->rx_state = RECV_WAIT_NSH; | 
 | 	info->rx_count = NSHL; | 
 | 	info->rx_skb = NULL; | 
 |  | 
 | 	set_bit(XMIT_WAITING, &(info->tx_state)); | 
 |  | 
 | 	/* Initialize HCI device */ | 
 | 	hdev = hci_alloc_dev(); | 
 | 	if (!hdev) { | 
 | 		BT_ERR("Can't allocate HCI device"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	info->hdev = hdev; | 
 |  | 
 | 	hdev->bus = HCI_PCCARD; | 
 | 	hci_set_drvdata(hdev, info); | 
 | 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev); | 
 |  | 
 | 	hdev->open  = dtl1_hci_open; | 
 | 	hdev->close = dtl1_hci_close; | 
 | 	hdev->flush = dtl1_hci_flush; | 
 | 	hdev->send  = dtl1_hci_send_frame; | 
 |  | 
 | 	spin_lock_irqsave(&(info->lock), flags); | 
 |  | 
 | 	/* Reset UART */ | 
 | 	outb(0, iobase + UART_MCR); | 
 |  | 
 | 	/* Turn off interrupts */ | 
 | 	outb(0, iobase + UART_IER); | 
 |  | 
 | 	/* Initialize UART */ | 
 | 	outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */ | 
 | 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); | 
 |  | 
 | 	info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) | 
 | 				& UART_MSR_RI; | 
 |  | 
 | 	/* Turn on interrupts */ | 
 | 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); | 
 |  | 
 | 	spin_unlock_irqrestore(&(info->lock), flags); | 
 |  | 
 | 	/* Timeout before it is safe to send the first HCI packet */ | 
 | 	msleep(2000); | 
 |  | 
 | 	/* Register HCI device */ | 
 | 	if (hci_register_dev(hdev) < 0) { | 
 | 		BT_ERR("Can't register HCI device"); | 
 | 		info->hdev = NULL; | 
 | 		hci_free_dev(hdev); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int dtl1_close(struct dtl1_info *info) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned int iobase = info->p_dev->resource[0]->start; | 
 | 	struct hci_dev *hdev = info->hdev; | 
 |  | 
 | 	if (!hdev) | 
 | 		return -ENODEV; | 
 |  | 
 | 	dtl1_hci_close(hdev); | 
 |  | 
 | 	spin_lock_irqsave(&(info->lock), flags); | 
 |  | 
 | 	/* Reset UART */ | 
 | 	outb(0, iobase + UART_MCR); | 
 |  | 
 | 	/* Turn off interrupts */ | 
 | 	outb(0, iobase + UART_IER); | 
 |  | 
 | 	spin_unlock_irqrestore(&(info->lock), flags); | 
 |  | 
 | 	hci_unregister_dev(hdev); | 
 | 	hci_free_dev(hdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dtl1_probe(struct pcmcia_device *link) | 
 | { | 
 | 	struct dtl1_info *info; | 
 |  | 
 | 	/* Create new info device */ | 
 | 	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); | 
 | 	if (!info) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	info->p_dev = link; | 
 | 	link->priv = info; | 
 |  | 
 | 	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; | 
 |  | 
 | 	return dtl1_config(link); | 
 | } | 
 |  | 
 |  | 
 | static void dtl1_detach(struct pcmcia_device *link) | 
 | { | 
 | 	struct dtl1_info *info = link->priv; | 
 |  | 
 | 	dtl1_close(info); | 
 | 	pcmcia_disable_device(link); | 
 | } | 
 |  | 
 | static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) | 
 | { | 
 | 	if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | 
 | 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | 
 |  | 
 | 	return pcmcia_request_io(p_dev); | 
 | } | 
 |  | 
 | static int dtl1_config(struct pcmcia_device *link) | 
 | { | 
 | 	struct dtl1_info *info = link->priv; | 
 | 	int ret; | 
 |  | 
 | 	/* Look for a generic full-sized window */ | 
 | 	link->resource[0]->end = 8; | 
 | 	ret = pcmcia_loop_config(link, dtl1_confcheck, NULL); | 
 | 	if (ret) | 
 | 		goto failed; | 
 |  | 
 | 	ret = pcmcia_request_irq(link, dtl1_interrupt); | 
 | 	if (ret) | 
 | 		goto failed; | 
 |  | 
 | 	ret = pcmcia_enable_device(link); | 
 | 	if (ret) | 
 | 		goto failed; | 
 |  | 
 | 	ret = dtl1_open(info); | 
 | 	if (ret) | 
 | 		goto failed; | 
 |  | 
 | 	return 0; | 
 |  | 
 | failed: | 
 | 	dtl1_detach(link); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct pcmcia_device_id dtl1_ids[] = { | 
 | 	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d), | 
 | 	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82), | 
 | 	PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863), | 
 | 	PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3), | 
 | 	PCMCIA_DEVICE_NULL | 
 | }; | 
 | MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); | 
 |  | 
 | static struct pcmcia_driver dtl1_driver = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.name		= "dtl1_cs", | 
 | 	.probe		= dtl1_probe, | 
 | 	.remove		= dtl1_detach, | 
 | 	.id_table	= dtl1_ids, | 
 | }; | 
 | module_pcmcia_driver(dtl1_driver); |